Search

Metal additive manufacturing technologies, such as electron beam powder bed fusion (PBF-EB), rely on layer heating to overcome the so-called "smoke" phenomenon. When scaled up for industrial manufacturing, PBF-EB becomes less productive due to the lengthy preheating process. Currently, only the electron beam (EB) is used for preheating in PBF-EB, resulting in increased manufacturing times, energy consumption, and in some cases limiting the applicability of the technology. In this study, a new preheating approach is suggested that incorporates a near-infrared radiation (NIR) emitter inside an PBF-EB system. The NIR unit eliminates the need for EB heating, reducing build time and powder charging. Successful builds using 316 L and Ti6Al4V precursor powders validate the feasibility of the proposed approach. The produced samples exhibit similar properties to those obtained by the standard PBF-EB process. The introduction of NIR technology also reduced build cost and increased the service intervals of the electron gun. [ABSTRACT FROM AUTHOR]

Purpose: This study aimed to evaluate how as-built electron beam melting (EBM) surface properties affect the onset of blood coagulation. The properties of EBM-manufactured implant surfaces for placement have, until now, remained largely unexplored in literature. Implants with conventional designs and custom-made implants have been manufactured using EBM technology and later placed into the human body. Many of the conventional implants used today, such as dental implants, display modified surfaces to optimize bone ingrowth, whereas custom-made implants, by and large, have machined surfaces. However, titanium in itself demonstrates good material properties for the purpose of bone ingrowth. Materials and Methods: Specimens manufactured using EBM were selected according to their surface roughness and process parameters. EBM-produced specimens, conventional machined titanium surfaces, as well as PVC surfaces for control were evaluated using the slide chamber model. Results: A significant increase in activation was found, in all factors evaluated, between the machined samples and EBM-manufactured samples. The results show that EBM-manufactured implants with as-built surfaces augment the thrombogenic properties. Conclusion: EBM that uses Ti6Al4V powder appears to be a good manufacturing solution for load-bearing implants with bone anchorage. The as-built surfaces can be used “as is” for direct bone contact, although any surface treatment available for conventional implants can be performed on EBM-manufactured implants with a conventional design. [ABSTRACT FROM AUTHOR]

Metal additive manufacturing (AM) is on its way to industrialization. One of the most promising techniques within this field, electron beam melting (EBM), is nowadays used mostly for the fabrication of high‐performance Ti‐based alloy components for the aerospace and medical industry. Among the industrial applications envisioned for the future of EBM, the fabrication of high carbon steels for the tooling industry is of great interest. In this context, the process windows for dense and crack‐free specimens for a highly alloyed (Cr–Mo–V) cold‐work steel powder are presented in this article. High‐solidification rates during EBM processing lead to very fine and homogeneous microstructures. The influence of process parameters on the resulting microstructure and the chemical composition is investigated. In addition, preliminary results show very promising mechanical properties regarding the as‐built and heat‐treated microstructure of the obtained material. [ABSTRACT FROM AUTHOR]