Search

Enzyme-linked immunosorbent assays (ELISAs) are used extensively for the detection and quantification of biomolecules in clinical diagnostics as well as in basic research. Although broadly used, the inherent complexities of ELISAs preclude their utility for straightforward point-of-need testing, where speed and simplicity are essential. With this in mind, we developed a bioluminescence-based immunoassay format that provides a sensitive and simple method for detecting biomolecules in clinical samples. We utilized a ternary, split-NanoLuc luciferase complementation reporter consisting of two small peptides (11mer, 13mer) and a 17 kDa polypeptide combined with a luminogenic substrate to create a complete, shelf-stable add-and-read assay detection reagent. Directed evolution was used to optimize reporter constituent sequences to impart chemical and thermal stability, as well as solubility, while formulation optimization was applied to stabilize an all-in-one reagent that can be reconstituted in aqueous buffers or sample matrices. The result of these efforts is a robust, first-generation bioluminescence-based homogenous immunoassay reporter platform where all assay components can be configured into a stable lyophilized cake, supporting homogeneous, rapid, and sensitive one-step biomolecule quantification in complex human samples. This technology represents a promising alternative immunoassay format with significant potential to bring critical diagnostic molecular detection testing closer to the point-of-need.

Identification of physiologically relevant targets for lead compounds emerging from drug discovery screens is often the rate-limiting step toward understanding their mechanism of action and potential for undesired off-target effects. To this end, we developed a streamlined chemical proteomic approach utilizing a single, photoreactive cleavable chloroalkane capture tag, which upon attachment to bioactive compounds facilitates selective isolation of their respective cellular targets for subsequent identification by mass spectrometry. When properly positioned, the tag does not significantly affect compound potency and membrane permeability, allowing for binding interactions with the tethered compound (probe) to be established within intact cells under physiological conditions. Subsequent UV-induced covalent photo-cross-linking "freezes" the interactions between the probe and its cellular targets and prevents their dissociation upon cell lysis. Targets cross-linked to the capture tag are then efficiently enriched through covalent capture onto HaloTag coated beads and subsequent selective chemical release from the solid support. The tag's built-in capability for selective enrichment eliminates the need for ligation of a capture tag, thereby simplifying the workflow and reducing variability introduced through additional operational steps. At the same time, the capacity for adequate cross-linking without structural optimization permits modular assembly of photoreactive chloroalkane probes, which reduces the burden of customized chemistry. Using three model compounds, we demonstrate the capability of this approach to identify known and novel cellular targets, including those with low affinity and/or low abundance as well as membrane targets with several transmembrane domains.

Sensitive detection of two biological events in vivo has long been a goal in bioluminescence imaging. Antares, a fusion of the luciferase NanoLuc to the orange fluorescent protein CyOFP, has emerged as a bright bioluminescent reporter with orthogonal substrate specificity to firefly luciferase (FLuc) and its derivatives such as AkaLuc. However, the brightness of Antares in mice is limited by the poor solubility and bioavailability of the NanoLuc substrate furimazine. Here, we report a new substrate, hydrofurimazine, whose enhanced aqueous solubility allows delivery of higher doses to mice. In the liver, Antares with hydrofurimazine exhibited similar brightness to AkaLuc with its substrate AkaLumine. Further chemical exploration generated a second substrate, fluorofurimazine, with even higher brightness in vivo. We used Antares with fluorofurimazine to track tumor size and AkaLuc with AkaLumine to visualize CAR-T cells within the same mice, demonstrating the ability to perform two-population imaging with these two luciferase systems. NanoLuc substrates with improved solubility and bioavailability, hydrofurimazine and fluorofurimazine, strongly enhance bioluminescence signals in vivo and enable bright dual-color bioluminescent imaging with AkaLuc and AkaLumine.

G protein-coupled receptors (GPCRs) are prominent targets to new therapeutics for a range of diseases. Comprehensive assessments of their cellular interactions with bioactive compounds, particularly in a kinetic format, are imperative to the development of drugs with improved efficacy. Hence, we developed complementary cellular assays that enable equilibrium and real-time analyses of GPCR ligand engagement and consequent activation, measured as receptor internalization. These assays utilize GPCRs genetically fused to an N-terminal HiBiT peptide (1.3 kDa), which produces bright luminescence upon high-affinity complementation with LgBiT, an 18-kDa subunit derived from NanoLuc. The cell impermeability of LgBiT limits signal detection to the cell surface and enables measurements of ligand-induced internalization through changes in cell-surface receptor density. In addition, bioluminescent resonance energy transfer is used to quantify dynamic interactions between ligands and their cognate HiBiT-tagged GPCRs through competitive binding with fluorescent tracers. The sensitivity and dynamic range of these assays benefit from the specificity of bioluminescent resonance energy transfer and the high signal intensity of HiBiT/LgBiT without background luminescence from receptors present in intracellular compartments. These features allow analyses of challenging interactions having low selectivity or affinity and enable studies using endogenously tagged receptors. Using the β-adrenergic receptor family as a model, we demonstrate the versatility of these assays by utilizing the same HiBiT construct in analyses of multiple aspects of GPCR pharmacology. We anticipate that this combination of target engagement and proximal functional readout will prove useful to the study of other GPCR families and the development of new therapeutics.

Intracellular target affinity and residence time are fundamental aspects of pharmacological mechanism (Lu and Tonge, Curr Opin Chem Biol 14:467–474, 2010). Although various robust biochemical approaches exist to measure these binding characteristics, analysis of compound binding with isolated targets may not accurately reflect engagement in the milieu of living cells. To realize the influence of cellular context, methods are needed that are capable of quantifying affinity and residence time in the presence of the intracellular factors that may impact target engagement. Bioluminescence resonance energy transfer (BRET) offers a solution for intracellular target engagement when quantitative metrics or kinetic analyses are required.

Ligand binding assays routinely employ fluorescently-labeled protein ligands to quantify the extent of binding. These ligands are commonly generated through chemical modification of accessible lysine residues, which often results in heterogeneous populations exhibiting variable binding properties. This could be remedied by quantitative, site-specific labeling. Recently, we reported on a single-step method integrating recombinant protein purification with 2-cyanobenzothiazole (CBT) condensation for labeling a proteolytically exposed N-terminal cysteine. Here, using three growth factors, we show that unlike random lysine labeling, this site-specific approach yielded homogeneous populations of growth factors that were quantitatively labeled at their N-termini and retained their binding characteristics. We demonstrate the utility of this labeling method through the development of a novel assay that quantifies the capacity of antibodies to block receptor-ligand interactions (i.e. antibody blockade). The assay uses bioluminescence resonance energy transfer (BRET) to detect binding of CBT-labeled growth factors to their cognate receptors genetically fused to NanoLuc luciferase. The ability of antibodies to block these interactions is quantified through decrease in BRET. Using several antibodies, we show that the assay provides reliable quantification of antibody blockade in a cellular context. As demonstrated here, this simple method for generating uniformly-labeled proteins has potential to promote more accurate and robust ligand binding assays.

Intracellular target affinity and residence time are fundamental aspects of pharmacological mechanism (Lu and Tonge, Curr Opin Chem Biol 14:467-474, 2010). Although various robust biochemical approaches exist to measure these binding characteristics, analysis of compound binding with isolated targets may not accurately reflect engagement in the milieu of living cells. To realize the influence of cellular context, methods are needed that are capable of quantifying affinity and residence time in the presence of the intracellular factors that may impact target engagement. Bioluminescence resonance energy transfer (BRET) offers a solution for intracellular target engagement when quantitative metrics or kinetic analyses are required.

Intracellular target affinity and residence time are fundamental aspects of pharmacological mechanism (Lu and Tonge, Curr Opin Chem Biol 14:467-474, 2010). Although various robust biochemical approaches exist to measure these binding characteristics, analysis of compound binding with isolated targets may not accurately reflect engagement in the milieu of living cells. To realize the influence of cellular context, methods are needed that are capable of quantifying affinity and residence time in the presence of the intracellular factors that may impact target engagement. Bioluminescence resonance energy transfer (BRET) offers a solution for intracellular target engagement when quantitative metrics or kinetic analyses are required.

Apoptosis is an important and necessary cell death program which promotes homeostasis and organismal survival. When dysregulated, however, it can lead to a myriad of pathologies from neurodegenerative diseases to cancer. Apoptosis is therefore the subject of intense study aimed at dissecting its pathways and molecular mechanisms. Although many assay methods exist for confirming whether an apoptotic response has occurred in vitro, most methods are destructive and involve laborious operator effort or specialized instrumentation. Here we describe a real-time, no-wash, microplate method which utilizes recombinant annexin V fusion proteins containing evolved binary subunits of NanoBiT™ luciferase. The fusion proteins, a time-released enzymatic substrate, a necrosis detection dye and exogenous calcium ions are delivered via an optimized and physiologically inert reagent directly to cells in culture at the time of treatment or dosing. Luminescent signals proportional to phosphatidylserine (PS) exposure and fluorescent signals generated as a result of loss of membrane integrity are then collected using a standard multimode plate reader at scheduled intervals over the exposure. The resulting luminescent and fluorescent data are then used to define the kinetics and magnitude of an apoptotic response. This study details our efforts to develop, characterize, and demonstrate the features of the assay by providing relevant examples from diverse cell models for programmed cell death.

Phenotypic screening of compound libraries is a significant trend in drug discovery, yet success can be hindered by difficulties in identifying the underlying cellular targets. Current approaches rely on tethering bioactive compounds to a capture tag or surface to allow selective enrichment of interacting proteins for subsequent identification by mass spectrometry. Such methods are often constrained by ineffective capture of low affinity and low abundance targets. In addition, these methods are often not compatible with living cells and therefore cannot be used to verify the pharmacological activity of the tethered compounds. We have developed a novel chloroalkane capture tag that minimally affects compound potency in cultured cells, allowing binding interactions with the targets to occur under conditions relevant to the desired cellular phenotype. Subsequent isolation of the interacting targets is achieved through rapid lysis and capture onto immobilized HaloTag protein. Exchanging the chloroalkane tag for a fluorophore, the putative targets identified by mass spectrometry can be verified for direct binding to the compound through resonance energy transfer. Using the interaction between histone deacetylases (HDACs) and the inhibitor, Vorinostat (SAHA), as a model system, we were able to identify and verify all the known HDAC targets of SAHA as well as two previously undescribed targets, ADO and CPPED1. The discovery of ADO as a target may provide mechanistic insight into a reported connection between SAHA and Huntington's disease.

Intracellular signaling pathways are mediated by changes in protein abundance and post-translational modifications. A common approach for investigating signaling mechanisms and the effects induced by synthetic compounds is through overexpression of recombinant reporter genes. Genome editing with CRISPR/Cas9 offers a means to better preserve native biology by appending reporters directly onto the endogenous genes. An optimal reporter for this purpose would be small to negligibly influence intracellular processes, be readily linked to the endogenous genes with minimal experimental effort, and be sensitive enough to detect low expressing proteins. HiBiT is a 1.3 kDa peptide (11 amino acids) capable of producing bright and quantitative luminescence through high affinity complementation (KD = 700 pM) with an 18 kDa subunit derived from NanoLuc (LgBiT). Using CRISPR/Cas9, we demonstrate that HiBiT can be rapidly and efficiently integrated into the genome to serve as a reporter tag for endogenous proteins. Witho...

The benefits provided by phenotypic screening of compound libraries are often countered by difficulties in identifying the underlying cellular targets. We recently described a new approach utilizing a chloroalkane capture tag, which can be chemically attached to bioactive compounds to facilitate the isolation of their respective targets for subsequent identification by mass spectrometry. The tag minimally affects compound potency and membrane permeability, enabling target engagement inside cells. Effective enrichment of these targets is achieved through selectivity in both their rapid capture onto immobilized HaloTag and their subsequent release by competitive elution. Here, we describe a significant improvement to this method where selective elution was achieved through palladium-catalyzed cleavage of an allyl-carbamate linkage incorporated into the chloroalkane capture tag. Selective tag cleavage provided robust release of captured targets exhibiting different modes of binding to the bioactive compound, including prolonged residence time and covalent interactions. Using the kinase inhibitors ibrutinib and BIRB796 as model compounds, we demonstrated the capability of this new method to identify both expected targets and "off-targets" exhibiting a range of binding affinities, cellular abundances, and binding characteristics.

Cultured mammalian cells provide an environment ideal for producing functional recombinant mammalian proteins. However, low expression levels of recombinant proteins present a challenge for their detection and purification. This unit will focus on HaloTag, a protein fusion tag designed to bind selectively and covalently to a chloroalkane ligand that may be attached to a variety of functional groups, allowing both protein detection and immobilization. Detection of HaloTag-fusion protein is achieved through binding to a fluorescent chloroalkane ligand, enabling rapid optimization of expression levels. HaloTag-based purification uses covalent capture of the HaloTag fusion onto HaloLink resin coupled with proteolytic cleavage to release the protein of interest from the resin. Covalent binding provides efficient protein capture regardless of expression level and eliminates protein loss during washes of the resin and as a result, offers significant improvements in protein recovery and purity over traditional non-covalent approaches.

Dysregulation of protein expression is a key mechanism of tumorigenesis. The most commonly used approach to monitor changes in expression is to perform SDS-PAGE, followed by immunoblotting, a labor-intensive process that requires high-quality antibodies to detect proteins at endogenous levels of expression. We have developed a novel protein tag utilizing NanoLuc Binary Technology (NanoBiT), a binary complementation system based on NanoLuc luciferase. The tag, designated High BiT (HiBiT), is only 11 amino acids in length, which minimizes potential interference with protein function. The amount of HiBiT-tagged protein is measured using a lytic detection reagent containing Large BiT (LgBiT), which binds with high affinity to HiBiT (KD~1 nM) to reconstitute a bright, luminescent enzyme. HiBiT-tagged proteins can be quantified in cell lysates over 7 orders of magnitude of linear dynamic range with a limit of detection of less than 10-19 moles (3 fg of 30 kDa protein). The simple add-mix-read assay protocol can be completed in minutes, providing an assay that is compatible with high-throughput applications. The sensitivity of the assay allows quantification of expression at endogenous levels, and the small tag size is ideal for CRISPR-mediated genome editing. HiBiT-tagged proteins separated by SDS-PAGE can be detected on blots at sub-picogram levels with a detection reagent containing LgBiT. By eliminating the multiple steps of blocking, binding, and washing of traditional blotting techniques, the protocol takes minutes instead of hours. Additionally, the cell surface expression, internalization, or secretion of HiBiT-tagged proteins can be measured in minutes using a non-lytic detection reagent containing the cell-impermeable LgBiT protein. HiBiT represents a next-generation protein tag that allows simple quantification of proteins of interest in their cellular context or following SDS-PAGE. Citation Format: Christopher Eggers, Braeden Butler, Robin Hurst, Mary Hall, Brock Binkowski, Lance Encell, Marie Schwinn, Thomas Machleidt, Keith Wood, Frank Fan. A novel multifunctional protein tag enables simple and sensitive bioluminescent quantification of tagged proteins [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2017; 2017 Apr 1-5; Washington, DC. Philadelphia (PA): AACR; Cancer Res 2017;77(13 Suppl):Abstract nr 4013. doi:10.1158/1538-7445.AM2017-4013

Efficacious and durable anti-cancer responses are driven by both the selective death of malignant cells and the induction of immunostimulatory activities. Limited but promising clinical evidence suggests that provocation of an unknown balance of inflammatory- and non-inflammatory cell death may be key for orchestrating these positive outcomes. Therefore, identifying and characterizing new clinically useful small molecules and biologic inducers (or combinations thereof) which promote a spectrum of programmed cell death in in vitro screening environments remains critically important. Unfortunately, current screening methods are either insufficiently robust, cost- or resource-prohibitive, or provide no means for initial characterization of the kinetics of programmed cell death. To address this unmet need, we developed a real-time, live cell assay method that utilizes a fully homogeneous, bioluminescent annexin V reagent. The method does not require laborious washing and sample preparation steps associated with traditional annexin methods and is fully compatible with plate-based multimodal signal detection systems. The system contains two annexin proteins which have been engineered to contain separate and distinct complementing domains of a binary luciferase. Additionally, the system contains a novel time-released luciferase substrate and a cell impermeable, fluorogenic DNA dye for monitoring necrosis. Because the annexin-luciferase fusion pairs have only modest affinity for each other, luminescence remains low until phosphatidylserine exposure, a hallmark of the programmed cell death phenotype, brings annexin monomers into close proximity facilitating complementation of the luciferase sensor. The assay reagent can be applied at dosing for real-time measurement of the dose-dependency and magnitude of programmed cell death progression. This work describes our efforts to characterize and validate the performance of the bioluminescent annexin assay using relevant cell death induction models. First, the assay was shown to be functionally concordant with a flow cytometry annexin method in a dose-response model with bortezomib at exposure periods known to produce both early and late-apoptosis (with necrosis) phenotypes. Next, we assessed the performance of the assay using a limited training set of small molecule and biologic inducers of programmed cell death that utilize different mechanisms of action (i.e., apoptosis and necroptosis) and by using a number of diverse but representative cancer cell lines. We conclude that the bioluminescent annexin method provides a new kinetic approach to efficient and effective detection of programmed cell death mechanisms in real time in a convenient homogeneous format. Citation Format: Kevin Kupcho, Andrew Niles, John Shultz, Jamison Grailer, Wenhui Zhou, Robin Hurst, Jim Hartnett, Terry Riss, Dan Lazar, James Cali. A real-time annexin V method for monitoring programmed cell death [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2017; 2017 Apr 1-5; Washington, DC. Philadelphia (PA): AACR; Cancer Res 2017;77(13 Suppl):Abstract nr 4296. doi:10.1158/1538-7445.AM2017-4296

The selective elimination of malignant cells via the apoptotic process continues to be the cornerstone of modern anti-cancer therapy regimens. Therefore, in vitro screening approaches aimed at identifying clinically useful apoptosis inducers remain critically important. Recently, phenotypic screening methods have enjoyed a resurgence due to more biologically complex and relevant cell models as well as advances in chemical proteomics which have allowed for more successful target identification. As a consequence, novel probes and tools with enabling attributes are required to fully realize this discovery potential. In an effort to address this unmet need, we have developed a bioluminescent and homogeneous annexin V binding assay for the assessment of apoptosis. Unlike traditional fluorescent annexin V methodology, the “no-wash” reagent employed in this new assay utilizes binary components of a novel luciferase separately fused to annexin V. The annexin V-luciferase subunit fusion pairs have low intrinsic affinity for each other and thus produce no or low luminescence until phosphatidylserine (PtdSer) exposure drives annexin-fusion pair oligimerization. Ultimately, this protein:protein interaction on or near the cell surface reconstitutes full luciferase activity causing an increase in luminescence in the presence of a luciferase substrate. A separate, pro-fluorescent, multiplexed component of the reagent further delineates differences in annexin positivity based on maintenance or loss of membrane integrity corresponding to apoptosis or necrosis, respectively. We validated this method using a panel of diverse cancer cell lines (U2-OS, DLD-1, HeLa, Jurkat, K562, A549, and PC-3), representing both attachment-dependent and -independent morphologies after dose-dependent challenge with intrinsic (bortezomib, panobinostat, staurosporine, and paclitaxel) and extrinsic (rhTRAIL) inducers of apoptosis as well as agents known to produce primary necrosis (ionomycin and digitonin). Caspase activation data was also collected in parallel plates at endpoint as a well-validated and sensitive orthogonal comparator. The bioluminescent annexin V method proved sufficiently robust in 384 well microplate formats to routinely produce Z’ > 0.7 and rank-order potencies in good agreement with caspase activation values. In addition to this microplate functionality, the reagent allowed for sensitive, facile imaging of apoptotic induction in living cells using different imaging platforms. Taken together, the method and reagent should provide unparalleled flexibility with regard to live cell apoptosis detection in both conventional microplate and high content-like imaging formats and advance the pace of new chemical entity discovery. Citation Format: Kevin Kupcho, John Shultz, Andrew Niles, Wenhui Zhou, Robin Hurst, Jim Hartnett, Thomas Machleidt, Terry Riss, Dan Lazar, Jim Cali. A bioluminescent, homogeneous annexin V microplate-based method for assessment of apoptosis. [abstract]. In: Proceedings of the 107th Annual Meeting of the American Association for Cancer Research; 2016 Apr 16-20; New Orleans, LA. Philadelphia (PA): AACR; Cancer Res 2016;76(14 Suppl):Abstract nr 3505.

Phenotypic screening has become increasingly common to the drug discovery workflow. Yet, productive outcomes remain hindered by the challenging task of identifying the underlying cellular targets mediating the desired phenotype. Current approaches rely on linking the bioactive compound to a surface or an affinity handle allowing selective capture of interacting proteins for identification by mass spectrometry. These methods can be constrained by ineffective capture of low affinity and low abundance proteins. In addition, for these methods to provide meaningful results, it is critical that the chemical derivatization of the bioactive compound would not disrupt the binding interactions with the cellular targets. Consequently, there is preference for methods compatible with living cells because they allow verification of the pharmacological activity of the modified compound. We have developed such a method based on a novel chloroalkane capture tag that minimally affects compound potency and cell permeability. Following binding with the tagged compound in live cells, the cells are lysed and the chloroalkylated compound, together with the bound targets, is rapidly captured onto immobilized HaloTag protein. The in-situ target engagement combined with rapid covalent capture allows for isolation of difficult targets with low affinity and/or low abundance. The putative targets identified by mass spectrometry are then validated for direct binding relationship with the bioactive compound by bioluminescence energy transfer. We tested this target capture/target-validation workflow using the interaction of histone deacetylases (HDACs) class I/IIb and the inhibitor SAHA (Vorinostat). RESULTS: Treatment of K562 cells with SAHA or SAHA-chloroalkane revealed high cellular potency against HDAC class I/IIb with minimal impact of the chloroalkane modification on the drug potency. Using the SAHA-chloroalkane to selectively enrich for SAHA targets from K-562 cells, we identified and validated all the known targets of SAHA (i.e., HDAC 1, 2, 3, 6, 8 and 10) regardless of their abundance or affinity (nM to low μM). In addition, we also identified and validated two previously undescribed targets of SAHA (CPPED1 and ADO), both metalloenzymes. Because SAHA binds to HDACs by chelating to a bound zinc ion, it may interact by a similar mechanism with other metalloenzymes. The discovery of ADO may also provide insight to a potential novel mode of action for SAHA in neurodegenerative diseases. Other experiments showed that replacing the chloroalkyl group in the SAHA-chloroalkane with biotin significantly reduced drug potency and consequently enrichment efficiency (only HDAC6 was isolated), further demonstrating the advantages provided by the relatively inert chloroalkane tag. Taken together these results indicate that our workflow can reveal the direct binding relationships between bioactive compounds and their cellular targets. Citation Format: Rachel Friedman Ohana, Thomas Kirkland, Carolyn Woodroofe, Sergiy Levin, Robin Hurst, Paul Otto, Tetsuo Uyeda, Michael Ford, Richard Jones, Danette Daniels, Marjeta Urh, Keith Wood. Decoding phenotypic drug screening targets using a novel chloroalkane capture tag. [abstract]. In: Proceedings of the 106th Annual Meeting of the American Association for Cancer Research; 2015 Apr 18-22; Philadelphia, PA. Philadelphia (PA): AACR; Cancer Res 2015;75(15 Suppl):Abstract nr 2446. doi:10.1158/1538-7445.AM2015-2446

Identifying the targets of a bioactive compound is often the rate limiting step toward understanding the molecular mechanism of drug action. Current approaches rely on linking the bioactive compound to a surface or an affinity handle, permitting selective capture of interacting proteins for identification by mass spectrometry. A major consideration with these methods is insuring that the chemical derivatization of the bioactive compound does not disrupt the binding interactions with the cellular targets. We have developed a method based on a novel chloroalkane capture tag that minimally affects compound potency and cell permeability. This allows verification of the pharmacological activity of the modified compound, thus increasing the confidence in the biological relevance of captured proteins. In addition, by allowing the chloroalkane-modified compound to bind the targets within living cells, the cellular architecture during the binding step is preserved and better represents the conditions that the unaltered compound would normally engage these targets. Following binding with the tagged compound in live cells, the cells are lysed and the chloroalkylated compound and its associated targets are rapidly captured onto immobilized HaloTag protein and then released by competitive elution. The identified targets are then validated for direct binding relationship with the bioactive compound by bioluminescence energy transfer. We tested this target capture/target validation work flow using the interaction of MAPK kinases with two allosteric kinase inhibitors (BIRB796 and a BIRB analog exhibiting 100-fold lower potency). RESULTS: Using the two BIRB-chloroalkane derivatives to selectively enrich for targets from HEPG2 cells, we identified and validated multiple relevant MAPK kinases as well as additional off-targets. Interestingly, all the discovered off-targets bind purines. Kinase inhibitors such as BIRB796 which acts by binding to the kinase ATP binding site can interact in a similar manner with other purine binding proteins. Using bioluminescence energy transfer we interrogated the affinity and residence time of the two BIRB compounds to multiple MAPK kinases inside living cells. Our results indicates that the BIRB796 analog exhibits 30-1000 fold reduced affinity to multiple MAPK kinases as well as significant shorter residence time compared to BIRB796. Taken together these results indicate that our workflow can reveal the direct binding relationships between bioactive compounds and their cellular targets and contribute to further understanding of these interactions. Citation Format: Rachel Friedman Ohana, Robin Hurst, Thomas Kirkland, Carolyn Woodroofe, Sergiy Levin, Paul Otto, Tetsuo Uyeda, Michael Ford, Richard Jones, Danette Daniels, Marjeta Urh, Keith Wood. Investigating the cellular interactions of BIRB796 analogues using a novel chloroalkane capture tag. [abstract]. In: Proceedings of the 106th Annual Meeting of the American Association for Cancer Research; 2015 Apr 18-22; Philadelphia, PA. Philadelphia (PA): AACR; Cancer Res 2015;75(15 Suppl):Abstract nr 2003. doi:10.1158/1538-7445.AM2015-2003