Search

Seleno-polysaccharides have become a major topic for research owing to their high anti-oxidative capacity and immune-enhancing activities. In this study, galactomannan (GM) was isolated from Sesbania cannabina, and next modified using HNO 3 -Na 2 SeO 3 method to obtain six varieties of seleno-galactomannans (SeGMs). FT-IR and GPC results showed the changes in chemical structure of SeGMs, indicating successful combination of selenium and GM. By measuring superoxide dismutase and malondialdehyde, the SeGMs showed a stronger protective effect against H 2 O 2 -induced oxidative damage in vitro than unmodified GM using macrophage RAW264.7 cell as a model, and the effect of SeGMs-14 was prominent. However, the selenylation modification did not show any obvious effect on the immunomodulatory activity of GM, as determined by the index of tumor necrosis factor-α, interleukin-6, and interleukin-1β. Overall, the prepared SeGMs from galactomannan could potentially serve as a dietary supplement of Se or an organic antioxidant., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Background: Gracilaria has been shown to be an important source of marine bioactive natural biomaterials and compounds. Although there are no enough patents used Gracilaria worldwide, the current study tries to put the Gracilaria on the spot for further important patents in the future., Objective: The current study investigates the pharmaceuticals and biochemical activity of Gracilaria because no previous studies have been carried out to examine the biochemical and pharmaceutical activates of Gracilaria from the Suez Canal of Egypt as an excellent source for bioactive compounds., Methods: Different advanced experimental models and analytical techniques, such as cytotoxicity, total antioxidant capacity, anticancer, and anti-inflammatory profiling were applied. The phytochemical analysis of different constituents was also carried out., Results: The mineral analysis revealed the presence of copper (188.3 ppm) and iron (10.07 ppm) in addition to a remarkable wealth of selenium and sulfur contents giving up to 36% of its dry mass. The elemental analysis showed high contents of sulfur and nitrogen compounds. The GCMS profiling showed varieties of different bioactive compounds, such as fatty acids, different types of carotenoids in addition to pigments, alkaloids, steroids. Many other compounds, such as carbohydrates and amino acids having antioxidant, anti-inflammatory, and antiviral activities, etc. were identified. The cytotoxicity activity of Gracilaria marine extract was very effective against cancerous cell lines and showed high ability as a potent antitumor due to their bioactive constituents. Specialized screening assays using two anticancer experimental models, i.e., PTK and SKH1 revealed 77.88% and 84.50% inhibition anticancer activity; respectively. The anti-inflammatory activities investigated using four different experimental models, i.e., COX1, COX2, IL6, and TNF resulted in 68%, 81.76%, 56.02% and 78.43% inhibition; respectively. Moreover, Gracilaria extracts showed potent anti-Alzheimer with all concentrations., Conclusion: Gracilaria proved to be a multi-product source of marine natural products for different biotechnological applications. Our recommendation is to investigate the Gracilaria bioactive secondary metabolites in order to create and innovate in more patents from current important seaweeds (Gracilaria)., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The fungi Aureobasidium pullulans, Mortierella humilis, Trichoderma harzianum and Phoma glomerata were used to investigate the formation of selenium- and tellurium-containing nanoparticles during growth on selenium- and tellurium-containing media. Most organisms were able to grow on both selenium- and tellurium-containing media at concentrations of 1 mM resulting in extensive precipitation of elemental selenium and tellurium on fungal surfaces as observed by the red and black colour changes. Red or black deposits were confirmed as elemental selenium and tellurium, respectively. Selenium oxide and tellurium oxide were also found after growth of Trichoderma harzianum with 1 mM selenite and tellurite as well as the formation of elemental selenium and tellurium. The hyphal matrix provided nucleation sites for metalloid deposition with extracellular protein and extracellular polymeric substances localizing the resultant Se or Te nanoparticles. These findings are relevant to remedial treatments for selenium and tellurium and to novel approaches for selenium and tellurium biorecovery.

Cadmium zinc telluride selenide (Cd 1-x Zn x Te 1-y Se y or CZTS) is one of the emerging CdTe-based semiconductor materials for detecting X- and gamma-ray radiation at or near room temperature (i.e., without cryogenic cooling). Potential applications of CZTS sensors include medical imaging, X-ray detection, and gamma-ray spectroscopy. Chemical passivation of CZTS is needed to reduce the conductivity of Te-rich surfaces, which reduces the noise and improves the device performance. In this study, we focus on the effect of surface passivation of CZTS using a 10% aqueous solution of ammonium fluoride. The effects of the chemical treatment were studied on the leakage current, charge transport measured as the electron mobility-lifetime (µτ) product, and the spectral resolution measured as the full-width at half-maximum (FWHM) of specific peaks. After passivation, the leakage current increased and began to decrease towards pre-passivation levels. The energy resolutions were recorded for eight applied voltages between -35 V and -200 V. The results showed an average of 25% improvement in the detector's energy resolution for the 59.6 keV gamma peak of Am-241. The electron µτ product was unchanged at 2 × 10 -3 cm 2 /V. These results show that ammonium fluoride is effective for chemical passivation of CZTS detectors.

An electrochemical biosensor was developed based on a steric hindrance hybridization assay to allow the highly sensitive detection of streptavidin. In the steric hindrance hybridization assay, the signaling strand DNA (sig-DNA) was labeled at the 3' end with CdSe quantum dots (QDs) and at the 5' end with biotin, and capturing strand DNA (the complementary strand of sig-DNA) was labeled at the 5' end with thiol. The steric hindrance effect generated by streptavidin which was bound with the signaling DNA strand. The streptavidin limited the ability of the sig-DNA to hybridize with the cap-DNA, which were linked on the surface of a gold electrode. Therefore, the concentration of streptavidin was detected indirectly based on the concentration of CdSe QDs on the electrode surface. The concentration of CdSe QDs on the electrode surface was detected by differential pulse anodic stripping voltammetry. Under optimal conditions, the streptavidin detection range using the as-prepared biosensor was 1.96pg/mL to 1.96µg/mL and the detection limit was 0.65pg/mL. The experimental results showed that the electrochemical biosensor could detect streptavidin rapidly and accurately., (Copyright © 2017. Published by Elsevier B.V.)

Selenate and selenite are considered emerging contaminants and pose a risk to living organisms. Since selenium anion species are at low concentration in aquatic environments, materials for its retention are required to enable monitoring. Herein, hydrotalcite was calcined and characterised to investigate sorption and desorption of selenite and selenate in competition with nitrate, sulfate and phosphate. Sorption experiments were carried out in batch system and desorption by sequential dilution. Selenite and selenate concentration remaining after N desorption steps was determined by mass balance. The isotherms were adjusted to the dual-mode Langmuir-Freundlich model (R 2  > 0.99). Maximum sorption capacity ranged from 494 to 563 meq kg -1 for selenite and from 609 to 659 meq kg -1 for selenate. Sulfate and phosphate ions showed greater competitive effect on the sorption of selenate and selenite, respectively. Low mobilization factors and high sorption efficiency (MF<3%; SE ≈ 100%) indicated that calcined hydrotalcite has the wanted characteristics for retention of relevant selenium anion species in aqueous media., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Selenium (Se) exposure poses potential risks to wildlife at the Salton Sea. Our previous research suggests Chlorella sp. be highly efficient at absorbing and volatilizing Se. In developing an algal treatment system for Se removal, this study further evaluated the performance under the conditions to be encountered in the field using Chlorella pyrenoidosa and Chlorella vulgaris. The results show the algal Se removal efficiency was little affected by photoperiod, yet volatilization became relatively greater in dark/light cycles over a longer term. The rates of Se absorption and volatilization by C. vulgaris were 88% and 77% more, respectively, in the DI water, while C. pyrenoidosa acted oppositely, indicating C. vulgaris will perform better in Se removal if nutrient levels are reduced in advance. The presence of sulfate reduced biomass Se, especially through volatilization, by 8% for C. vulgaris, lessening potential ecotoxicity. Finally, C. vulgaris released biomass Se back to the water column under hypersaline conditions, leading to a 6% increase in water Se concentrations. These results suggest C. vulgaris be the best alga for the treatment of Se laden river water in the Salton Sea area, yet a filtering system is required to prevent Se containing algae from entering food chains., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This work reports the selenium (Se(IV)) detection and removal from water by ligand functionalized organic-inorganic based novel composite adsorbent. The composite adsorbent was prepared by direct immobilization of N,N'-di(3-carboxysalicylidene)-3,4-diamino-5-hydroxypyrazole onto the mesoporous silica monolith. The adsorbent exhibited distinct color change in the presence of various concentrations of Se(IV). This was characterized by UV-vis spectroscopy, and the color change was observed by naked-eye observation. The detection limit was determined to be 1.14 μg/L. The effect of solution pH, interferential metal ions, contact time, initial Se(IV) concentration, and adsorbent regeneration were evaluated. The maximum sorption capacity was determined based on the initial concentration. The data fitted well to the Langmuir isotherm model, and the maximum Se(IV) sorption capacity was 111.12 mg/g. The presence of diverse competing ions did not affect the Se(IV) sorption capacity, and the adsorbent had almost no sorption capacity for these coexisting ions, which suggests the high selectivity to Se(IV) ions. The adsorbed Se(IV) was eluted with suitable eluent (0.10 M NaOH) and simultaneously regenerated into the initial form for the next operation. The excellent reusability of the adsorbent was justified after eight consecutive sorption-elution-regeneration cycles. The proposed adsorbent is cost-effective and environmentally friendly and a potential candidate for treatment of water containing Se(IV)., (Copyright © 2015 Elsevier B.V. All rights reserved.)