Search

Mapping of charge densities in molecular crystals has been contemplated ever since it was recognized that X-rays are scattered by the electron density in the crystal. The methodology both from the experimental and theoretical perspective was standardized and applied extensively only during the last few decades, as technological advances were a prerequisite in both data collection and computation. Multipole formalism developed for accurate X-ray diffraction data is routinely utilized in conjunction with the concept of atoms in molecules to obtain quantitative estimates of the topological properties in molecular crystals which allow the evaluation of both bonded and non-bonded contacts. Recently, with the advent of quantum crystallography, combining Hirshfeld atom refinement along with libraries of extremely localized molecular orbitals, HAR-ELMOs, has emerged as an alternate approach. Apart from the weak hydrogen bonds, other highly directional non-bonded contacts like halogen, pnicogen, chalcogen and carbon bonds have been subjected to charge density analysis to experimentally observe and quantify sigma-holes using experimental high-resolution X-ray diffraction data. The recognition of lack of directional preferences in hydrophobic interactions is demonstrated experimentally which might have far reaching consequences in the areas of materials and biology.

This recommendation proposes a definition for the term “chalcogen bond”; it is recommended the term is used to designate the specific subset of inter- and intramolecular interactions formed by chalcogen atoms wherein the Group 16 element is the electrophilic site.

We discuss here a solution-processed thin film of antimony trisulphide (Sb2S3; band gap approximate to 1.7 eV; electronic configuration: ns(2)np(0)) for applications in planar heterojunction (PHJ) solar cells. An alternative solution processing method involving a single-metal organic precursor, viz., metal-butyldithiocarbamic acid complex, is used to grow the thin films of Sb2S3. Because of excess sulphide in the metal complex, the formation of any oxide is nearly retarded. Sb2S3 additionally displays structural anisotropy with a ribbon-like structure along the 001] direction. These ribbon-like structures, if optimally oriented with respect to the electron transport layer (ETL)/glass substrate, can be beneficial for light-harvesting and charge-transport properties. A PHJ solar cell is fabricated comprising Sb2S3 as the light absorber and CdS as an ETL coated on to FTO. With varying film sintering temperature and thickness, the typical ribbon-like structures predominantly with planes hkl: l = 0 stacked horizontally along with respect to CdS/FTO are obtained. The morphology of the films is observed to be a function of the sintering temperature, with higher sintering temperatures yielding compact and smooth films with large-sized grains. Maximum photon to electricity efficiency of 2.38 is obtained for PHJ solar cells comprising 480 nm thick films of Sb2S3 sintered at 350 degrees C having a grain size of few micrometers (>5 mu m). The study convincingly shows that improper grain orientation, which may lead to nonoptimal alignments of the intrinsic structure with regard to the ETL/glass substrate, is not the sole parameter for determining photovoltaics performance. Other solution-processing parameters can still be suitably chosen to generate films with optimum morphology, leading to high photon to electricity efficiency.

Noncoding RNA molecules are composed of a large variety of noncanonical base pairs that shape up their functionally competent folded structures. Each base pair is composed of at least two interbase hydrogen bonds (H-bonds). It is expected that the characteristic geometry and stability of different noncanonical base pairs are determined collectively by the properties of these interbase H-bonds. We have studied the ground-state electronic properties using density functional theory (DFT) and DFT-D3-based methods] of all the 118 normal base pairs and 36 modified base pairs, belonging to 12 different geometric families (cis and trans of WW, WH, HH, WS, HS, and SS) that occur in a nonredundant set of high-resolution RNA crystal structures. Having addressed some of the limitations of the earlier approaches, we provide here a comprehensive compilation of the average energies of different types of interbase H-bonds (E-HB). We have also characterized each interbase H-bond using 13 different parameters that describe its geometry, charge distribution at its bond critical point (BCP), and n -> sigma*-type charge transfer from filled pi orbitals of the H-bond acceptor to the empty antibonding orbital of the H-bond donor. On the basis of the extent of their linear correlation with the H-bonding energy, we have shortlisted five parameters to model linear equations for predicting E-HB values. They are (i) electron density at the BCP: rho, (ii) its Laplacian: del(2)rho, (iii) stabilization energy due to n -> sigma*-type charge transfer: E(2), (iv) donor-hydrogen distance, and (v) hydrogen-acceptor distance. We have performed single variable and multivariable linear regression analysis over the normal base pairs and have modeled sets of linear relationships between these five parameters and E-HB. Performance testing of our model over the set of modified base pairs shows promising results, at least for the moderately strong H-bonds.

A new triphenolic hexaaza chiral macrocyclic amine L forms trinuclear complexes 1-3 with rare earth metal lanthanide(III) ions (Ln = Dy, Eu, and Y) with the general formula Ln(3)L(mu(3)-OH)(2)(NO3)(4)(H2O)(2)]center dot xCH(3)OH. The crystal structures of the nitrate derivatives of this type reveal the presence of a {Ln(3)(mu(3)-OH)(2)} core within the macrocycle. For the chloride derivative of dysprosium(III) 4, a duplex of the trinuclear compound is formed to give the hexanuclear Dy6L2(mu(3)-OH)(3)(mu-O)(2-Cl)(3)Cl-4(H2O)(2)] compound, in which two trinuclear macrocyclic units are linked by bridging chloride anions, supplemented by a hydrogen bond connecting the central oxo and hydroxo bridges as well as by weak interactions at the periphery of the macrocycle. The nuclear magnetic resonance spectra of these complexes reveal a dynamic behavior in solution related to exchange of axial ligands and hindered rotation of phenyl substituents. Magnetic studies of the nitrate (1-3) and chloride (4) dysprosium(III) complexes suggest the presence of weak ferromagnetic interactions between neighboring metal centers. The interaction is strongest for compound 1, and for the related duplex compound 4, it appears to be somewhat weaker. The ac susceptibility measurements for complexes 1 and 4 confirm their field-induced single-molecule magnet behavior with the following characteristics: Lie ff = 10.6 cm(-1) (15.2 K), ro = 2.05 X 10(-4) s under 2500 Oe dc fields for 1; Ue ff 7.9 cm-' (11.4 K), ao = 1.68 X 10(-4) s under a 3000 Oe dc field for 4.

Motions of two distinct ions can get correlated because the polarization induced by the ions can propagate through intervening water and can interfere with each other. This important aspect, which is not included in the continuum model based theories, has not been studied adequately. We calculate the effective force between two oppositely charged and similarly charged ions fixed in water as a function of separation distance R. At short separations, R less than 1.5 nm, the effective force vastly differs from the 1/esR2 dependence advocated by the screened Coulomb’s force law (SCFL), where es is the static dielectric constant of the medium. This breakdown of the SCFL is shown to be due to the persistent interference between the polarizations created by the two charges in a manner similar to the vortex–antivortex pair formation in the XY model Hamiltonian. The distance dependence of dielectric constants, es(R), extracted from our simulation exhibits interesting features and can be used in future modeling. In addition, we show that the force–force time autocorrelation between two neighboring ions decays differently at short separation and analyze the friction on the ion pair at different separation distances.Motions of two distinct ions can get correlated because the polarization induced by the ions can propagate through intervening water and can interfere with each other. This important aspect, which is not included in the continuum model based theories, has not been studied adequately. We calculate the effective force between two oppositely charged and similarly charged ions fixed in water as a function of separation distance R. At short separations, R less than 1.5 nm, the effective force vastly differs from the 1/esR2 dependence advocated by the screened Coulomb’s force law (SCFL), where es is the static dielectric constant of the medium. This breakdown of the SCFL is shown to be due to the persistent interference between the polarizations created by the two charges in a manner similar to the vortex–antivortex pair formation in the XY model Hamiltonian. The distance dependence of dielectric constants, es(R), extracted from our simulation exhibits interesting features and can be used in future modeling. In...

c-Jun N-terminal kinase (JNK), a member of the MAPK family, is associated with a variety of diseases and immune responses. To dissect the mechanistic role of JNKs in such processes, a specific inhibitor for JNKs holds great value. SP600125 is a widely used inhibitor of JNKs despite its non-specific activity. In an effort to obtain better specific inhibitors, three anthrapyrazolone halogenated derivatives have been synthesized and characterized. Among the three derivatives, 5-chloro-2-(2-chloroethyl)dibenzo[cd,g] indazol-6(2H)-one is clearly established as a specific inhibitor of JNK with augmented expression of chemokines in LPS-activated macrophages based on modelling studies followed by in vitro and ex vivo evaluation.

We present here the study of diffusion and intercalation mechanisms of Li-ion and Na-ion in titanium disulfide (TiS2) films grown by atomic layer deposition (ALD). The layered TiS2 has been explored here due to the interesting differences between the intercalation mechanisms of Li+ and Na+. The ALD grown TiS2 films further facilitate the study as this method provides compact and dense films with no polymer binder and carbon additives. The diffusion and intercalation processes are observed to depend on the ionic size and character of the solid electrolyte interphase. The increased capacity obtained for the present ALD synthesized samples is attributed to the enhanced anchoring ability of the TiS2 films, which comprises of an extended nanowall network. The charge transfer resistance (R-ct) obtained from impedance data correlate well with the lithiation steps observed in the galvanostatic discharge-charge studies. At potentials where lithiation takes place, R-ct value is observed to drop. This direct correlation is however, not observed between the R-ct and sodiation potential. The diffusion coefficients, calculated using GITT and impedance methods, are observed to be independent of the type of Li-salts. However, the variation of diffusion coefficients with the lithiation/sodiation voltages are different. This is attributed to the combined differences in the ionic radii and phase formation. Intercalation-de-intercalation in to TiS2 coated with alumina is also studied here. Coating with alumina results in a stable SEI. However, coating leads to higher R-ct, lower DLi+ and poor capacity retention as a function of cycle number.

Advanced multidimensional NMR techniques have been employed to investigate the intramolecular hydrogen bonds (HBs) in a series of N,N `-(1,1 `-binaphthalene]-2,2 `-diyl)bis(benzamide) derivatives, with the site-specific substitution of different functional groups. The existence of intramolecular HBs and the elimination of any molecular aggregation and possible intermolecular HBs are ascertained by various experimental NMR techniques, including solvent polarity dependent modifications of HB strengths. In the fluorine substituted derivative, direct evidence for the engagement of organic fluorine in HB is obtained by the detection of heteronuclear through-space correlation and the coupling between two NMR active nuclei where the transmission of spin polarization is mediated through HBs ((1h)J(FH)). The extent of reduction in the strength of (1h)J(FH) on dilution with high polarity solvents directly provided the qualitative measure of HB strength. The HB, although becoming weakened, does not get nullified even in pure high polarity solvent, which is attributed to the structural constraints. The rate of exchange of a labile hydrogen atom with the deuterium of the solvent permitted the measurement of their half-lives, that are correlated to the relative strengths of HBs. The experimental NMR findings are further validated by XRD and DFT-based theoretical computations, such as, NCI and QTAIM.

Ferroelectric based piezoceramics exhibiting large electromechanical response are used as sensors, actuators, and transducers in wide-ranging applications spanning sectors like space, defense, medical diagnostics, etc. In general, the large piezoelectric response in ferroelectric solid solutions is associated with a composition driven interferroelectric instability, commonly known as a morphotropic phase boundary (MPB). Here, we show that MPB is not necessarily required to achieve electromechanical response equivalent to, or even more than what can be achieved in MPB based ferroelectric solid solutions. We show this on two ferroelectric solid solution systems, namely, $(1--x)\mathrm{PbTi}{\mathrm{O}}_{3}\ensuremath{-}(x)\mathrm{Bi}(\mathrm{N}{\mathrm{i}}_{1/2}\mathrm{H}{\mathrm{f}}_{1/2}){\mathrm{O}}_{3}$ (PT-BNH) and $(\mathrm{Bi},\mathrm{La})\mathrm{Fe}{\mathrm{O}}_{3}\ensuremath{-}\mathrm{PbTi}{\mathrm{O}}_{3}$ (BF-PT:La) which show large piezoelectric response (${d}_{33}\ensuremath{\sim}450\phantom{\rule{0.16em}{0ex}}\mathrm{pC}/\mathrm{N}$) and extraordinarily high electrostrain of \ensuremath{\sim}1.3%, respectively. Although analogous to the conventional MPB systems, the critical compositions of these two alloys mimic a two-phase structural state (cubic + tetragonal), detailed analysis that suggests that it is not so. The cubic phase is rather a manifestation of short correlation length of the tetragonal regions and appears when the system is compositionally driven from a normal ferroelectric state to a relaxor ferroelectric state. This proves that, in contrast to conventional MPB systems, the large electromechanical response of the critical compositions of PT-BNH and BF-PT:La is not due to interferroelectric instability enabled polarization rotation. In the absence of the MPB, the sole contributor to large electromechanical response is a process associated with domain wall motion, large local polarization, and (non-MPB) lattice softening. The generalized ideas derived from our investigation offer scope for expanding the basket of high-performance piezoelectric materials by exploring solid solutions outside of the MPB framework.

Intrinsically disordered proteins (IDPs), being sensitive to proteolytic degradation both in vitro and in vivo, can be stabilized by the interactions with various binding partners. Here, we show for the first time that silver nanoparticles (AgNPs) have the ability to enhance the half-life of an IDP, thereby rendering it stable for a month against proteolytic degradation. The conjugate of the unstructured linker domain of human insulin-like growth factor binding protein-2 (L-hIGFBP2) with 10 nm citrate-capped AgNPs was studied using two-dimensional NMR spectroscopy and other biophysical techniques. Our studies reveal the extent and nature of residue-specific interactions of the IDP with AgNPs. These interactions mask proteolysis-prone sites of the IDP and stabilize it. This study opens new avenues for the design of appropriate nanoparticles targeting IDPs and for storage, stabilization and delivery of IDPs into cells in a stable form.

Over the decades, a great deal of attention has been focused on the solvation and transport properties of small rigid monatomic ions such as Na+, K+, Li+, Cl-, and Br- due to their importance in physical chemistry. Much less attention has been devoted to polyatomic ions although many polyatomic ions (such as nitrate, acetate, sulfate, and ammonium) are of great importance in biological and chemical processes. While the translational diffusion of smaller rigid ions shows the remarkable nonmonotonic dependence on inverse ion size (known as the `` breakdown of Walden product''), the intermediate- to large-sized polyatomic ions (such as nitrate, acetate, and sulfate) exhibit different anomalies pointed out only recently. In this Perspective article, we provide an overview of how rotational diffusion and translational diffusion of these ions themselves are coupled to translational and rotational motions of water molecules. We discuss how diffusion of polyatomic ions is different from that of monatomic ions due to the rotational self-motion of the former that enhances diffusion in specific cases because of symmetry. While a continuum hydrodynamic model fails to describe the motion of polyatomic ions, we discuss how a mode-coupling theory approach can capture many aspects of this coupling between the solute ion and solvent water. We discuss how ionic mobility in water and other dipolar solvents are intimately connected to the dipolar solvation dynamics, in particular to its ultrafast component. We point out how the usual thinking on the relation between the diffusion and entropy needs to be modified in the case of ion diffusion.

It is shown that simple bilayer devices consisting of the diketopyrrolopyrrole (DPP) monomer Ph-TDPP-Ph as donor and C-60 as acceptor feature J-V-characteristics of a bidirectional organic phototransistor where illumination intensity plays the role of the gate voltage as compared to a conventional field-effect transistor. The output current may therefore be controlled both electrically and optically. The underlying mechanism is based on the good charge transport in Ph-TDPP-Ph and C-60, the intrinsic dissociation properties of C-60, and the presence of an injection barrier for holes. In addition to this, it is demonstrated that the observed behavior of the DPP/C-60 system allows the realization of basic logic elements like NOT-, AND-, and OR-Gates, which may provide the basis for advanced analog and digital applications.

Identification and characterization of base-multiplets, which are essentially mediated by base-pairing interactions, can provide insights into the diversity in the structure and dynamics of complex functional RNAs, and thus facilitate hypothesis driven biological research. The necessary nomenclature scheme, an extension of the geometric classification scheme for base-pairs by Leontis and Westhof, is however available only for base-triplets. In the absence of information on topology, this scheme is not applicable to quartets and higher order multiplets. Here we propose a topology-based classification scheme which, in conjunction with a graph-based algorithm, can be used for the automated identification and characterization of higher order base-multiplets in RNA structures. Here, the RNA structure is represented as a graph, where nodes represent nucleotides and edges represent base-pairing connectivity. Sets of connected components (of n nodes) within these graphs constitute subgraphs representing multiplets of “n” nucleotides. The different topological variants of the RNA multiplets thus correspond to different nonisomorphic forms of these subgraphs. To annotate RNA base-multiplets unambiguously, we propose a set of topology-based nomenclature rules for quartets, which are extendable to higher multiplets. We also demonstrate the utility of our approach toward the identification and annotation of higher order RNA multiplets, by investigating the occurrence contexts of selected examples in order to gain insights regarding their probable functional roles.

The formation of two triplet excitons at the cost of one photon via singlet exciton fission in organic semiconductors can potentially enhance the photocurrent in photovoltaic devices. However, the role of spin density distribution in driving this photophysical process has been unclear until now. Here we present the significance of electronic spin density distribution in facilitating efficient intramolecular singlet exciton fission (iSEF) in π-bridged pentacene dimers. We synthetically modulate the spin density distribution in a series of pentacene dimers using phenyl-, thienyl- and selenyl- flanked diketopyrrolopyrrole (DPP) derivatives as π-bridges. Using femtosecond transient absorption spectroscopy, we find that efficient iSEF is only observed for the phenyl-derivative in ~2.4 ps while absent in the other two dimers. Electronic structure calculations reveal that phenyl-DPP bridge localizes α- and β-spin densities on distinct terminal pentacenes. Upon photoexcitation, a spin exchange mechanism enables iSEF from a singlet state which has an innate triplet pair character., Singlet exciton fission – the separation of photoexcited singlet states into two triplet states – holds promise for enhancing photocurrents in photovoltaic technologies. Krishnapriya et al. characterize how electron delocalization over the bridges in a series of pentacene dimers controls this process.

Herein, we report the synthesis and characterization of the metal free low valent fluoroborylene [(Me-cAAC)2BF] (1) stabilized by cyclic (alkyl)(amino) carbene (cAAC). The fluoroborylene 1 is obtained by the reductive defluorination of Me-cAAC:BF3 with 2.0 equivalents of KC8 in the presence of 1.0 equivalent of Me-cAAC. Due to its highly electron rich nature, 1 underwent one-electron oxidation with 1.0 equivalent of lithium tetrakis(pentafluorophenyl)borate [LiB(C6F5)4] to form the radical cation [(Me-cAAC)2BF]˙+[B(C6F5)4]- (2). DFT studies suggested that the lone pair of electrons is localized on the boron atom in 1, which explains its unprecedented reactivity. Both compounds 1 and 2 were characterized by X-ray crystallography. The radical cation 2 was studied by EPR spectroscopy. peerReviewed

The current emphasis of crystal engineering, which has evolved over the past three decades through crystal packing analysis and identification of crystal design strategies, has shifted from structure to properties, i.e., design of molecular solids with targeted combination of properties. Amongst the panoply of chemical, physical, and biological properties that these materials exhibit, a comprehensive understanding of the mechanical properties is perhaps the most challenging as it involves connecting molecular level structural features to macroscopic mechanical behavior. However, the adoption of the nanoindentation technique, with which it is possible to measure both quantitatively and accurately the mechanical response of even small single crystals, in crystal engineering, has paved the way for substantial progress in the recent past. In this review, we summarize some recent results with an emphasis as to how one can design and control properties of molecular solids such as elastic modulus and hardness. This review closes with an enumeration of the key challenges that lie ahead. Such studies show a big scope for studying mechanical properties of organic crystals as a function of crystal structure, and in turn to understand their structure-property relationship for designing future smart materials. This emerging research field has prospects and a potential to play an important role in the future development of crystal engineering. (C) 2016 Elsevier Ltd. All rights reserved.

In the present study synthesis of BaTi1-xCrxO3 nanocatalysts (x = 0.0

We introduce a self-assembling polypeptide-based nanotube system having the ability to specifically target cancer cells. The nanotubes target the cancer cell surface through integrin engagement with the help of multiple RGD units present along their surface. While the nanotubes are non-toxic towards cells in general, they can be loaded with suitable drugs to be released in a sustained manner in cancer cells. In addition, the nanotubes can be utilized for cellular imaging using any covalently tagged fluorescent dye. They are stable over a wide range of temperature due to intermolecular disulphide bonds formed during the self-assembly process. At the same time, presence of disulphide bonds provides a redox molecular switch for their degradation. Taken together this system provides a unique avenue for multimodal formulation in cancer therapy. Electronic supplementary material The online version of this article (10.1186/s12951-018-0427-1) contains supplementary material, which is available to authorized users.

The metabolomic profile of an embryo culture medium can aid in the advanced prediction of embryonic developmental potential and genetic integrity. But it is not known if this technology can be used to determine the in vitro potential of inner cell mass (ICM) in adherence and proliferation. Here, we investigated the developmental potential of mouse 2-cell embryos carrying cisplatin-induced DNA lesions (IDL), beyond blastocyst stage using ICM outgrowth assay. The genetic integrity of ICM cells was determined by comet assay. The metabolic signatures of spent medium were recorded 84 hours post injection of hCG (hpi-hCG), and after 96 hours of extended in vitro culture (Ex 96) by NMR spectroscopy. We observed that blastocysts that lack the ability to adhere in vitro had an increased requirement of pyruvate (p in vitro derived human embryos in clinical settings.

International audience; We numerically investigate the phase diagram of the giant-piezoelectric (1−x)Ba(Zr0.2Ti0.8)O3−x(Ba0.7Ca0.3)TiO3 system, treating the ions either as classical objects (via classical Monte Carlo or CMC simulations) or quantum mechanically (via path-integral quantum Monte Carlo or PI-QMC simulations). It is found that PI-QMC not only provides a better agreement with available experimental data for the temperature-composition phase diagram, but also leads to the existence of an orthorhombic ground state in a narrow range of composition, unlike CMC that “only” yields ground states of rhombohedral or tetragonal symmetry. X-ray powder diffraction experiments are further conducted at 20 K. They confirm the occurrence of a quantum-fluctuation-induced orthorhombic state for some compositions and therefore validate the PI-QMC prediction. The role of quantum effects on the local structure, such as the annihilation of a homogeneous rhombohedral system in favor of an inhomogeneous mixing of orthorhombic and rhombohedral clusters, is also documented and discussed.

A systematic assessment of key material attributes of active pharmaceutical ingredients (APIs) using minimal material approach is illustrated at the particulate level and bulk level. At a bulk level, flowability improvement of an API through crystal habit manipulation is exemplified. The impact of crystal structures and particulate properties (crystal habit and crystal size) on their mechanical behaviour were addressed by measuring powder tabletability. Bulk powder flow and tabletability were assessed on a small scale using ring shear tester and using a single punch compaction simulator, which can be easily integrated during the process of solid form screening activity for early preformulation studies. In addition, mechanical responses on single crystals were evaluated with nanoindentation. Indentation performed on three faces of piroxicam single crystals resulted reproducible results when compared with the literature, indicating the efficiency of this technique to perform single crystal characterization. The study highlights that, the early assessment of key material properties during solid form screening can aid in selecting optimal solid forms provided physicochemical properties are acceptable. (C) 2018 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

Heme-binding proteins constitute a large family of catalytic and transport proteins. Their widespread presence as globins and as essential oxygen and electron transporters, along with their diverse enzymatic functions, have made them targets for protein design. Most previously reported designs involved the use of α-helical scaffolds, and natural peptides also exhibit a strong preference for these scaffolds. However, the reason for this preference is not well-understood, in part because alternative protein designs, such as those with β-sheets or hairpins, are challenging to perform. Here, we report the computational design and experimental validation of a water-soluble heme-binding peptide, Pincer-1, composed of predominantly β-scaffold secondary structures. Such heme-binding proteins are rarely observed in nature, and by designing such a scaffold, we simultaneously increase the known fold space of heme-binding proteins and expand the limits of computational design methods. For a β-scaffold, two tryptophan zipper β-hairpins sandwiching a heme molecule were linked through an N-terminal cysteine disulfide bond. β-Hairpin orientations and residue selection were performed computationally. Heme binding was confirmed through absorbance experiments and surface plasmon resonance experiments (K(D) = 730 ± 160 nm). CD and NMR experiments validated the β-hairpin topology of the designed peptide. Our results indicate that a helical scaffold is not essential for heme binding and reveal the first designed water-soluble, heme-binding β-hairpin peptide. This peptide could help expand the search for and design space to cytoplasmic heme-binding proteins.

epl 123(4), 47003 (2018). doi:10.1209/0295-5075/123/47003, A proper investigation of the valence band electronic structure is the essential first step towards understanding the intriguing co-existence of several exotic electronic phases like ferromagnetism and superconductivity, in $LaAlO_3-SrTiO_3$ heterostructures. In order to comprehend the electronic structure across the $LaAlO_3-SrTiO_3$ oxide interface, a detailed valence band investigation has been carried out using variable energy hard X-ray photoelectron spectroscopy and signatures of both low-energy coherent and high-energy features have been observed in the valence band spectra. Our combined experimental and theoretical study suggests that the charge carriers at the interface are weakly correlated and the high-energy feature does not arise from the lower Hubbard band. Instead, this high-energy feature is attributed to in-gap states induced by oxygen vacancies and possible polaron formation., Published by EDP Sciences, Les-Ulis

A new monoclinic polymorph, form II, of 3,4-dimethoxycinnamic acid has been isolated and shows a different photochemical and photomechanical property from the previously reported triclinic form I. The solid-state 2 + 2 photodimerization of these polymorphs is rationalized on the basis of minimum and maximum molecular movement during the reaction – the so-called Kaupp and Schmidt models for these reactions., A new monoclinic polymorph, form II (P21/c, Z = 4), has been isolated for 3,4-dimethoxycinnamic acid (DMCA). Its solid-state 2 + 2 photoreaction to the corresponding α-truxillic acid is different from that of the first polymorph, the triclinic form I (, Z = 4) that was reported in 1984. The crystal structures of the two forms are rather different. The two polymorphs also exhibit different photomechanical properties. Form I exhibits photosalient behavior but this effect is absent in form II. These properties can be explained on the basis of the crystal packing in the two forms. The nanoindentation technique is used to shed further insights into these structure−property relationships. A faster photoreaction in form I and a higher yield in form II are rationalized on the basis of the mechanical properties of the individual crystal forms. It is suggested that both Schmidt-type and Kaupp-type topochemistry are applicable for the solid-state trans-cinnamic acid photodimerization reaction. Form I of DMCA is more plastic and seems to react under Kaupp-type conditions with maximum molecular movements. Form II is more brittle, and its interlocked structure seems to favor Schmidt-type topochemistry with minimum molecular movement.

The nanoindentation response of the (001) face of sodium saccharin dihydrate is examined. The structure can be demarcated into regular and irregular regions or domains. The regular domains have solid-like and the irregular ones have liquid-like characteristics. Therefore, these domains impart a microstructure to the crystal. The indent face (001) is prominently developed in this crystal and unambiguously presents the regular and irregular regions to nanoindention. Average values of elastic modulus and hardness show a distinct bimodal mechanical response. Such a response has been observed in the case of intergrown polymorphs of aspirin and felodipine. We examine two possible reasons as to why the responses could be for bimodal in this crystal. The first possibility could be that the two domains correspond to regions of the original dihydrate and a lower hydrate that is obtained by the loss of some water. The second possibility could be that these responses correspond to regular and irregular regions in the structure. Nanoindentation is a very useful technique in the characterization of molecular solids, as a complementary technique to X-ray crystallography, because it samples different length scales.

The intermolecular interactions and structural features in crystals of seven halogenated N-benzylideneanilines (Schiff bases), all of which exhibit remarkable flexibility, were examined to identify the common packing features that are the raison d'être for the observed elasticity. The following two features, in part related, were identified as essential to obtain elastic organic crystals: 1) A multitude of weak and dispersive interactions, including halogen bonds, which may act as structural buffers for deformation through easy rupture and reformation during bending; and 2) corrugated packing patterns that would get interlocked and, in the process, prevent long-range sliding of molecular planes.

The nanoindentation technique has recently been utilized for quantitative evaluation of the mechanical properties of molecular materials successfully, including their temperature (T) dependence. In this paper, we examine how the mechanical anisotropy varies with T in saccharin and L-alanine single crystals. Our results show that elastic modulus (E) decreases linearly in all the cases examined, with the T-dependence of E being anisotropic. Correspondence between directional dependence of the slopes of the E vs. T plots and the linear thermal expansion coefficients was found. The T-dependence of hardness (H), on the other hand, was found to be nonlinear and significant when (100) of saccharin and (001) of L-alanine are indented. While the anisotropies in E and H of saccharin and E of L-alanine enhance with T, the anisotropy in H of L-alanine was found to reduce with T. Possible mechanistic origins of these variations are discussed.

In recent years, silver nanoparticles (AgNPs) have attracted significant attention owing to their unique physicochemical, optical, conductive and antimicrobial properties. One of the properties of AgNPs which is crucial for all applications is their stability. In the present study we unravel a mechanism through which silver nanoparticles are rendered ultrastable in an aqueous solution in complex with the protein ubiquitin (Ubq). This involves a dynamic and reversible association and dissociation of ubiquitin from the surface of AgNP. The exchange occurs at a rate much greater than 25 s(-1) implying a residence time of 4 the positively charged surface of the protein comes in contact with the citrate capped AgNP surface. Further, NMR relaxation-based experiments suggest that in addition to the dynamic exchange, a conformational rearrangement of the protein takes place upon binding to AgNP. The ultrastability of the AgNP-Ubq complex was found to be useful for its anti-microbial activity, which allowed the recycling of this complex multiple times without the loss of stability. Altogether, the study provides new insights into the mechanism of protein-silver nanoparticle interactions and opens up new avenues for its application in a wide range of systems.

The combined utility of many one and two dimensional NMR methodologies and DFT-based theoretical calculations have been exploited to detect the intramolecular hydrogen bond (HB) in number of different organic fluorine-containing derivatives of molecules, viz. benzanilides, hydrazides, imides, benzamides, and diphenyloxamides. The existence of two and three centered hydrogen bonds has been convincingly established in the investigated molecules. The NMR spectral parameters, viz., coupling mediated through hydrogen bond, one-bond NH scalar couplings, physical parameter dependent variation of chemical shifts of NH protons have paved the way for understanding the presence of hydrogen bond involving organic fluorine in all the investigated molecules. The experimental NMR findings are further corroborated by DFT-based theoretical calculations including NCI, QTAIM, MD simulations and NBO analysis. The monitoring of H/D exchange with NMR spectroscopy established the effect of intramolecular HB and the influence of electronegativity of various substituents on the chemical kinetics in the number of organic building blocks. The utility of DQ-SQ technique in determining the information about HB in various fluorine substituted molecules has been convincingly established.

Glasses in the system xV2O5·20Li2O·(80 − x) [0.6B2O3:0.4ZnO] (where 10 ≤ x ≤ 50) have been prepared by a simple microwave method. Microwave synthesis of materials offers advantages of efficient transformation of energy throughout the volume in an effectively short time. Conductivity in these glasses was controlled by the concentration of transition metal ion (TMI). The dc conductivity follows Arrhenius law and the activation energies determined by regression analysis varies with the content of V2O5 in a non-linear passion. This non-linearity is due to different conduction mechanisms operating in the investigated glasses. Impedance and electron paramagnetic resonance (EPR) spectroscopic studies were performed to elucidate the nature of conduction mechanism. Cole–cole plots of the investigated glasses consist of (i) single semicircle with a low frequency spur, (ii) two depressed semicircles and (iii) single semicircle without spur, which suggests the operation of two conduction mechanisms. EPR spectra reveal the existence of electronic conduction between aliovalent vanadium sites. Further, in highly modified (10V2O5 mol%) glasses Li+ ion migration dominates.

Strontium releasing bioactive ceramics constitute an important class of biomaterials for osteoporosis treatment. In the present study, we evaluated the synthesis, phase assemblage, and magnetic properties of strontium hexaferrite, SrFe12O19, (SrFe) nanoparticles. On the biocompatibility front, the size- and dose-dependent cytotoxicity of SrFe against human mesenchymal stem cells (hMSCs) were investigated. After establishing their non-toxic nature, we used the strontium hexaferrite nanoparticles (SrFeNPs) in varying amount (x = 0, 10, and 20 wt %) to consolidate bioactive composites with hydroxyapatite (HA) by multi-stage spark plasma sintering (SPS). Rietveld refinement of these spark plasma sintered composites revealed a near complete decomposition of SrFe12O19 to magnetite (Fe3O4) along with a marked increase in the unit cell volume of HA, commensurate with strontium-doped HA. The cytocompatibility of SrHA-Fe composites with hMSCs was assessed using qualitative and quantitative morphological analysis along with phenotypic and genotypic expression for stem cell differentiation. A marked decrease in the stemness of hMSCs, indicated by reduced vimentin expression and acquisition of osteogenic phenotype, evinced by alkaline phosphatase (ALP) and collagen deposition was recorded on SrHA-Fe composites in osteoinductive culture. A significant upregulation of osteogenic marker genes (Runx2, ALP and OPN) was detected in case of the SrHA-Fe composites, whereas OCN and Col IA expression were similarly high for baseline HA. However, matrix mineralization was elevated on SrHA-Fe composites in commensurate with the release of Sr2+ and Fe2+. Summarizing, the current work is the first report of strontium hexaferrite as a non-toxic nanobiomaterial. Also, SrHA-based iron oxide composites can potentially better facilitate bone formation, when compared to pristine HA.

Extending our earlier investigation of magnetic properties of Nd2NiMnO6, we show that it exhibits a magnetic transition below ∼6 K to a ferrimagnetic state. This behavior is interpreted as arising from a long-range ordering of Nd moments antiferromagnetically coupled to the ferromagnetic Ni–Mn ordered moments. Due to the richness of its multiple magnetic transitions and the easily influenced magnetic state by the application of an external magnetic field, established in our earlier study, it has a remarkable inverse magneto-caloric effect (IMCE) at low temperatures (T c ∼ 200 K). IMCE and CMCE correspond to the antiferromagnetic arrangement of Nd and Ni–Mn sublattices and ferromagnetic ordering of Ni–Mn sublattices, respectively. Nd2NiMnO6 with its second order phase transition follows the universal behavior of ∆SM(T); it also shows a power law dependency on the magnetic field as Δ S M ∝ H η .

The metal-insulator transition, a quantum phase transition signifying the natural transformation of a metallic conductor to an insulator, continues to be the focus of intense inquiry and debate. The first discussion of the heuristic differences between metals and insulators, and implicitly the critical conditions for the transition between these canonical electronic regimes, dates back to the dawn of the twentieth century. As we approach the end of the century, the precise nature of the metal-insulator transition remains one of the major intellectual challenges in condensed matter science. In this article we present a brief introduction to just some of the key underlying features of this enduring physical phenomenon. The following articles and discussion present a detailed current account of the many facets of the science of the metal-insulator transition.

The development of high efficiency perovskite solar cells has sparked a multitude of measurements on the optical properties of these materials. For the most studied methylammonium(MA) PbI3 perovskite, a large range (6-55 meV) of exciton binding energies has been reported by various experiments. The existence of excitons at room temperature is unclear. For the MAPbX(3) perovskites we report on relativistic Bethe-Salpeter Equation calculations (GW-BSE). This method is capable to directly calculate excitonic properties from first-principles. At low temperatures it predicts exciton binding energies in agreement with the reported `large' values. For MAPbI(3), phonon modes present in this frequency range have a negligible contribution to the ionic screening. By calculating the polarization in time from finite temperature molecular dynamics, we show that at room temperature this does not change. We therefore exclude ionic screening as an explanation for the experimentally observed reduction of the exciton binding energy at room temperature and argue in favor of the formation of polarons.

Iron-based superconductors have been found to exhibit an intimate interplay of orbital, spin, and lattice degrees of freedom, dramatically affecting their low-energy electronic properties, including superconductivity. Albeit the precise pairing mechanism remains unidentified, several candidate interactions have been suggested to mediate the superconducting pairing, both in the orbital and in the spin channel. Here, we employ optical spectroscopy (OS), angle-resolved photoemission spectroscopy (ARPES), ab initio band-structure, and Eliashberg calculations to show that nearly optimally doped NaFe$_{0.978}$Co$_{0.022}$As exhibits some of the strongest orbitally selective electronic correlations in the family of iron pnictides. Unexpectedly, we find that the mass enhancement of itinerant charge carriers in the strongly correlated band is dramatically reduced near the $\Gamma$ point and attribute this effect to orbital mixing induced by pronounced spin-orbit coupling. Embracing the true band structure allows us to describe all low-energy electronic properties obtained in our experiments with remarkable consistency and demonstrate that superconductivity in this material is rather weak and mediated by spin fluctuations., Comment: Open access article available online at http://www.nature.com/articles/srep18620

Despite significant advances in recent times, the investigation of discovering a perfect biomaterial is perennial. In this backdrop, blending of natural and synthetic polymers is gaining popularity since it is the easiest way to complement the drawbacks and attain a superlative material. Based on this, the objective of this study was to synthesize a novel polyester, poly(galactitol sebacate), and subsequently blend this polymer with one of the three natural polymers such as alginate, chitosan or ethyl cellulose. FT-IR showed the presence of both the polymers in the blends. H-1 NMR confirmed the chemical structure of the synthesized poly (galactitol sebacate). Thermal characterization was performed by DSC revealing that the polymers were amorphous in nature and the glass transition temperatures increased with the increase in ratio of the natural polymers in the blends. SEM imaging showed that the blends were predominantly homogeneous. Contact angle measurements demonstrated that the blending imparted the hydrophilic nature into poly (galactitol sebacate) when blending with alginate or chitosan and hydrophobic when blending with ethyl cellulose. In vitro hydrolytic degradation studies and dye release studies indicated that the polymers became more hydrophilic in alginate and chitosan blends and thus accelerated the degradation and release process. The reverse trend was observed in the case of ethyl cellulose blends. Modeling elucidated that the degradation and dye release followed first order kinetics and Higuchi kinetics, respectively. In vitro cell studies confirmed the cytocompatible nature of the blends. It can be proposed that the chosen natural polymers for blending showed wide variations in hydrophilicity resulting in tailored degradation, release and cytocompatibility properties and thus are promising candidates for use in drug delivery and tissue engineering. (C) 2016 Elsevier B.V. All rights reserved.

There has been a paradigm shift in research foci toward elemental electrodes from the conventional intercalation compound-based electrochemical storage. Replacing intercalation transition metal (oxide) compounds with elemental cathodes (e.g., sulfur, oxygen) theoretically raises the storage capacities by more than one order in magnitude. The insulating nature and complexities of the redox reaction associated with electroactive elements necessitates their housing inside an electronic conductor, which has been mainly carbon. Efficiency of the electrochemical storage using such elemental electrodes, besides depending on factors related to the electrolyte, solid-state diffusion, mainly depends on characteristics of the carbon host. We report here a novel, simple, and efficient pressure-induced capillary encapsulation protocol for the confinement of chalcogens, sulfur (5) and selenium (Se), inside carbon nanotubes (CNTs). Confinement led to lowering of the surface tension of molten S/Se, resulting in superior wetting and ultrahigh loading of the CNTs. Higher than 95% of the CNTs is loaded, and very high loading, nearly 85% of S/Se inside the CNTs, is achieved. When assembled at a very high areal loading (similar to 10 mg cm(-2)) in the Li-S/Se battery, the S/Se-CNT cathodes exhibited very stable cyclability and high values of specific capacity at widely varying operating current densities (0.1-10 C-rates).

The nanoindentation technique is being widely utilized to measure the mechanical properties of small single crystals of molecular materials. However, all the experiments reported hitherto were performed under quasi-static conditions and at relatively low loading rates. ``Will the plastic response change if the tests are performed at high strain rates?'' is a question we address in this communication. For this, we have examined the strain rate sensitivity of nanoindentation responses on the major faces of four different molecular crystals: L-alanine, saccharin, p-nitroaniline, and sulfathiazole. Experimental results indicate that the measured hardness values are loading rate insensitive. The possible reasons for this insensitivity and implications for applications in pharmaceutical manufacturing are discussed.

The reducibility of synthesized ceria-stabilized zirconia (CSZ) with strong shock-heated test gases is investigated. Free piston-driven shock tube operating at hypersonic speed at Mach number of 6-8 has been used to heat the ultrahigh pure test gases like Ar to similar to 12800 K, N-2 to similar to 7960 K, and O-2 to similar to 5500 K at a medium reflected shock pressure (5.0-7.4 MPa) for a short duration of 1-2 ms test time. Under this extreme thermodynamic condition, test gases undergo real gas effects. The structural and spectroscopic investigations of CSZ (Ce2Zr2O8) after interaction with shock-heated argon gas show pyrochlore structure of Ce2Zr2O7-delta which is observed to be black in color. In presence of shock-heated N-2 gas, CSZ remains in fluorite structure by changing its color to pale green as nitrogen atoms fill oxygen vacancies. After O-2 interaction with the shock wave, CSZ remains pale yellow but the X-ray diffraction pattern shows the presence of monoclinic ZrO2 due to phase separation. During reduction process, Ce4+ has been reduced to Ce3+ which is an unusual effect. In this study, the catalytic and surface recombination effects of CSZ due to shock-induced compression in millisecond timescale are presented.

In recent years, Graphene Oxide (GO) and its derivatives have attracted significant attention owing to their unique physicochemical, optical and conductive properties and have been used in a diverse range of applications. One of the properties of GO, which is important for its applications in biological systems, is the nature of its interactions with biomolecules such as proteins. We present here the dynamic aspects of the interaction of GO with human ubiquitin (8.6 kDa) unraveled using nuclear magnetic resonance (NMR) spectroscopy. This study, for the first time, reveals an interaction involving fast and reversible association-dissociation of the protein molecules from the surface of the GO sheet. The conformation of the protein is not affected due to the interactions. The interactions were found to be electrostatic in nature and are attributed to the polar functional groups present on the protein and GO sheets, which was verified by titration of GO with ubiquitin at different pH. Taken together, the study provides new insights into protein-GO interactions, and the NMR methods described will be of utility for probing such interactions in general while designing new chemical and biological applications involving functionalized graphene oxide.

Olivine structured lithium iron phosphate, LiFePO4 (LFP), is a promising alternative cathode material due to its high theoretical capacity (170 mA h g(-1)), low cost and higher environmental compatibility. However, due to its poor electronic conductivity and Li+-ion diffusivity the electrochemical performance of LFP deteriorates with increasing charge/discharge rates. Networking of downsized LFP particles with an improperly chosen carbon conduit may not effectively reduce the Li+-ion diffusion pathways and improve electron transport. We demonstrate here a unique 3D configuration comprising ultra-small LFP particles (size: 5 +/- 2 nm) ``adhered'' to few-layer reduced holey-graphene oxide sheets (h-GO) that allows Li+-ions to traverse shorter non-tortuous pathways. The h-GO sheets, which are only

A simple solution-processing and self-assembly approach that exploits the synergistic interactions between multiple hydrogen bonded networks and aromatic interactions was utilized to synthesize molecular crystals of cyclic dipeptides (CDPs), whose molecular weights (~0.2 kDa) are nearly three orders of magnitude smaller than that of natural structural proteins (50–300 kDa). Mechanical properties of these materials, measured using the nanoindentation technique, indicate that the stiffness and strength are comparable and sometimes better than those of natural fibres. The measured mechanical responses were rationalized by recourse to the crystallographic structural analysis and intermolecular interactions in the self-assembled single crystals. With this work we highlight the significance of developing small molecule based bioinspired design strategies to emulate biomechanical properties. A particular advantage of the successfully demonstrated reductionistic strategy of the present work is its amenability for realistic industrial scale manufacturing of designer biomaterials with desired mechanical properties.

The variation of hardness as a function of the number of carbon atoms in alpha,omega-alkanedicarboxylic acids, CNH2N-2O4 (4

We discuss here a semiconductors assembly comprising of titanium dioxide (TiO2) rods sensitized by cadmium sulfide (CdS) nanocrystals for potential applications in large area electronics on three dimensional (3-D) substrates. Vertically aligned TiO2 rods are grown on a substrate using a 150 degrees C process flow and then sensitized with CdS by SILAR method at room temperature. This structure forms an effective photoconductor as the photo-generated electrons are rapidly removed from the CdS via the TiO2 thereby permitting a hole rich CdS. Current-voltage characteristics are measured and models illustrate space charge limited photo-current as the mechanism of charge transport at moderate voltage bias. The stable assembly and high speed are achieved. The frequency response with a loading of 10 pF and 9 M Omega shows a half power frequency of 100 Hz. (C) 2015 The Electrochemical Society. All rights reserved.

Crystals of voriconazole, an antifungal drug, are soft in nature, and this is disadvantageous during compaction studies where pressure is applied on the solid. Crystal engineering is used to make cocrystals and salts with modified mechanical properties (e.g., hardness). Cocrystals with biologically safe coformers such as fumaric acid, 4-hydroxybenzoic acid, and 4-aminobenzoic acid and salts with hydrochloric acid and oxalic acid are prepared through solvent assisted grinding. The presence (salt) or absence (cocrystal) of proton transfer in these multicomponent crystals is unambiguously confirmed with single crystal X-ray diffraction. All the cocrystals have 1:1 stoichiometry, whereas salts exhibit variable stoichiometries such as HCl salt (1:2) and oxalate salts (1:1.5 and 1:1). The nanoindentation technique was applied on single crystals of the salts and cocrystals. The salts exhibit better hardness than the drug and cocrystals in the order salts ≫ drugcocrystals. The molecular origin of this mechanical modulation is explained on the basis of slip planes in the crystal structure and relative orientations of the molecules with respect to the nanoindentation direction. The hydrochloride salt is the hardest solid in this family. This may be useful for tableting of the drug during formulation and in drug development.

Quantitative evaluation of the mechanical behavior of molecular materials by a nanoindentation technique has gained prominence recently. However, all the reported data have been on room-temperature properties despite many interesting phenomena observed in them with variations in temperature. In this paper, we report the results of nanoindentation experiments conducted as a function of temperature, T, between 283 and 343 K, on the major faces of three organic crystals: saccharin, sulfathiazole (form 2), and L-alanine, which are distinct in terms of the number and strength of intermolecular interactions in them. Results show that elastic modulus, E, and hardness, H, decrease markedly with increasing T. While E decreases linearly with T, the variations in H with T are not so, and were observed to drop by similar to 50% over the range of T investigated. The slope of the linear fits to E vs T for the organic crystals was found to be around 1, which is considerably higher than the values of 0.3-0.5 reported in the literature for metallic, ionic, and covalently bonded crystalline materials. Possible implications of the observed remarkable changes in H for pharmaceutical manufacturing are highlighted.

For a general tripartite system in some pure state, an observer possessing any two parts will see them in a mixed state. By the consequence of Hughston-Jozsa-Wootters theorem, each basis set of local measurement on the third part will correspond to a particular decomposition of the bipartite mixed state into a weighted sum of pure states. It is possible to associate an average bipartite entanglement ($\bar{\mathcal{S}}$) with each of these decompositions. The maximum value of $\bar{\mathcal{S}}$ is called the entanglement of assistance ($E_A$) while the minimum value is called the entanglement of formation ($E_F$). An appropriate choice of the basis set of local measurement will correspond to an optimal value of $\bar{\mathcal{S}}$; we find here a generic optimality condition for the choice of the basis set. In the present context, we analyze the tripartite states $W$ and $GHZ$ and show how they are fundamentally different., Comment: 14+ pages, 1 figure; final version; in different context, a part of the work can be found at arXiv:1201.5620

A study on self-assembly of anisotropically substituted penta-aryl fullerenes in water has been reported. The penta-phenol-substituted amphiphilic fullerene derivative C60Ph5(OH)(5)],exhibited self-assembled vesicular nanostructures in water under the experimental conditions. The size of the vesicles Was observed to depend upon the kinetics of self-assembly and could be varied from similar to 300 to similar to 70 nm. Our mechanistic study indicated that the self-assembly of C60Ph5(OH)(5) is driven by extensive intermolecular as well as water-mediated hydrogen :bonding along with fullerene-fullerene hydrophobic interaction in water. The cumulative effect of these interactions is responsible for the stability of vesicular structures even on the removal of solvent. The substitution of phenol with anisole resulted in different packing and interaction of the fullerene derivative, as Indicated in the molecular dynamics studies, thus resulting in different self-assembled nanostructures. The hollow vesicles were further encapsulated with a hydrophobic conjugated polymer and water-soluble dye as guest molecules. Such confinement of pi-conjugated polymers in fullerene has significance in bulk heterojunction devices for efficient exciton diffusion.

In the present study, we have synthesized Fe, Co and Ni doped BaTiO3 catalyst by a wet chemical synthesis method using oxalic acid as a chelating agent. The concentration of the metal dopant varies from 0 to 5 mol% in the catalysts. The physical and chemical properties of doped BaTiO3 catalysts were studied using various analytical methods such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), BET surface area and Transmission electron microscopy (TEM). The acidic strength of the catalysts was measured using a n-butylamine potentiometric titration method. The bulk BaTiO3 catalyst exhibits a tetragonal phase with the P4mm space group. A structural transition from tetrahedral to cubic phase was observed for Fe, Co and Ni doped BaTiO3 catalysts with an increase in doped metal concentration from 1 to 5 mol%. The particle sizes of the catalysts were calculated from TEM images and are in the range of 30–80 nm. All the catalysts were tested for the catalytic reduction of nitrobenzene to azoxybenzene. The BaTiO3 catalyst was found to be highly active and less selective compared to the doped catalysts which are active and highly selective towards azoxybenzene. The increase in selectivity towards azoxybenzene is due to an increase in acidic strength and reduction ability of the doped metal. It was also observed that the nature of the metal dopant and their content at the B-site has an impact on the catalytic reduction of nitrobenzene. The Co doped BaTiO3 catalyst showed better activity with only 0.5 mol% doping than Fe and Ni doped BaTiO3 catalysts with maximum nitrobenzene conversion of 91% with 78% selectivity to azoxybenzene. An optimum Fe loading of 2.5 mol% in BaTiO3 is required to achieve 100% conversion with 93% selectivity whereas Ni with 5 mol% showed a conversion of 93% and a azoxybenzene selectivity of 84%.