196 results on '"Suo, Hongli"'
Search Results
2. Investigation of the Microstructure and Rolling Texture Evolution of Cu-45 at.% Ni Alloys during the Recovery Process by Quasi-In Situ Electron Backscatter Diffraction
3. Infiltration effect of Mg with different matter states in the reaction of MgB2 bulks
4. Investigation of a repeatable and widely applicable method to reduce the turn-to-turn contact resistivity of REBCO tapes
5. Possible mechanisms of cubic texture generation in heavily rolling face-centered cubic metal due to the annealing twining
6. Feasible evolution process of tensile property dominant effect factor in annealed high purity nickel by a combination of in situ tensile technique and EBSD
7. CMAS corrosion resistance, thermal shock resistance and numerical simulation of novel surface micromesh thermal barrier coatings
8. Exploration of correlation between the material characteristics of the copper layer on the electrical and thermal properties of REBCO tape and coil
9. Mg gas infiltration for the fabrication of MgB2 pellets using nanosized and microsized B powders
10. Ultra-fast dynamic deposition of EuBa2Cu3O7−δ-BaHfO3 nanocomposite films: Self-assembly structure modulation and flux pinning behaviors
11. Al doped Sr and Cd metal oxide nanomaterials for resistive response of humidity sensing
12. Review of synthesis of high volumetric density, low gravimetric density MgB2 bulk for potential magnetic field applications
13. Effect of stress-relief annealing on rolled texture of nickel-based alloys
14. Photocatalytic degradation of the antibiotic ciprofloxacin in the aqueous solution using Mn/Co oxide photocatalyst
15. Systematic investigation of the texture evolution of Cu-Ni alloys with different strains
16. A Study about Ni–8 at % W Alloy Substrates Used for REBCO Coated Conductors
17. Emerging Cu‐Based Tandem Catalytic Systems for CO2 Electroreduction to Multi‐Carbon Products
18. Strong Cube Texture Formation in Heavily Cold-Rolled Ni8W/Ni12W/Ni8W Composite Alloy Substrates Used in YBCO Coated Conductors
19. Systematic research on the effect of both positive and negative mismatch dopants in double-doped YBCO superconducting films
20. Synthesis of high surface area AgNPs from Dodonaea viscosa plant for the removal of pathogenic microbes and persistent organic pollutants
21. Graphene preparation and process parameters by pre-intercalation assisted electrochemical exfoliation of graphite
22. Emerging Cu‐Based Tandem Catalytic Systems for CO2 Electroreduction to Multi‐Carbon Products.
23. Systematical analysis on the grain orientation evolution of pure nickel under plastic deformation by using in-situ EBSD
24. Synthesis of AgNPs coated with secondary metabolites of Acacia nilotica: An efficient antimicrobial and detoxification agent for environmental toxic organic pollutants
25. Electrochemical performance of multifuel based nanocomposite for Solid Oxide Fuel Cell
26. Strong cube texture of super-high tungsten Ni–W alloy substrates used in REBCO coated conductors
27. Metal oxides nanomaterials for the photocatalytic mineralization of toxic water wastes under solar light illumination
28. Ag–Ni and Al–Ni nanoparticles for resistive response of humidity and photocatalytic degradation of Methyl Orange dye
29. Synthesis of silver and aluminum doped magnetic nanoparticles: New fascinating materials with multipurpose applications
30. The Possible Control Method of Turn-to-Turn Contact Resistivity of REBCO Coil by Surface Coating
31. Investigation of a repeatable and widely applicable method to reduce the turn-to-turn contact resistivity of REBCO tapes
32. Aerosol clustering in an urban environment of Beijing during (2005–2017)
33. Novel two-step procedure for measuring I c vs. tensile stress of commercial REBCO tape
34. Fabrication and characterization of textured Ni–5 at.% W/Ni–9.3 at.% W/Ni–5 at.% W composite substrates via solid-clad-by-liquid method
35. Al–Sr metal oxides and Al–Cd layered double hydroxides for the removal of Acridine orange dye in visible light exposure
36. Comparative Characterization of Magnetic Properties of Textured Ni–5 at.%W Alloy Substrates
37. Intermediate annealing and strong cube texture of Ni-5at.%W alloy thin substrates for YBCO coated conductors
38. Systematic investigation of a NbTi-Bi2223 hybrid low-resistive joint
39. Electrical, dielectric and photocatalytic applications of iron-based nanocomposites
40. Novel two-step procedure for measuring I c vs. tensile stress of commercial REBCO tape.
41. Effect of Yb Substitution on Microstructure and Superconducting Properties of Y1−xYbxBa2Cu3O7−δ Films
42. Investigation of the Microstructure and Rolling Texture Evolution of Cu-45 at.% Ni Alloys during the Recovery Process by Quasi-In Situ Electron Backscatter Diffraction
43. Strong cube texture formation of Ni5W/Ni9.3W/Ni5W composite thin substrates for YBCO-coated conductors
44. Possible Mechanisms of Cubic Texture Generation in Heavily Rolling Face-Centered Cubic Metal Due to the Annealing Twining
45. Mechanisms of Oxygen Evolution Reaction in Metal Oxides: Adsorbate Evolution Mechanism versus Lattice Oxygen Mechanism
46. Investigation of the corrosion resistance of graphene-nickel composite micro-parts
47. Effect of the SS304 coating layer on the electrical and thermal properties of REBCO commercial tape
48. Evolutions of the texture and microstructure of a heavily cold-rolled Ni9W alloy during recrystallization
49. Lightest Metal Leads to Big Change: Lithium‐Mediated Metal Oxides for Oxygen Evolution Reaction
50. Recent Advances in Seawater Electrolysis
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.