Search

In recent years, plasmonic optical tweezers have been used to trap nanoparticles and study interactions with their environment. An unavoidable challenge is the plasmonic heating due to resonant excitation and the resulting temperature rise in the surrounding environment. In this work, we demonstrate trapping of custom-synthesized 20 nm nanoparticles based on molecular graphene quantum dots using metamaterial plasmonic tweezers. Superior trap stiffness values as high as 8.8 (fN/nm)/(mW/$\mu\mbox{m}^2$) were achieved with optical intensities lower than 1 mW/$\mu\mbox{m}^2$. By gradually increasing the laser intensity we identified a critical value beyond which the stiffness values dropped significantly. This value corresponded to a temperature rise of about 16$^o$C, evidently sufficient to create thermal flows and disrupt the trapping performance. We, therefore, identified a safe intensity regime for trapping nanoparticles without unwanted heat. Our platform can be used for efficient nanopositioning of fluorescent particles and quantum emitters in an array configuration, potentially acting as a single-photon source configuration., Comment: 28 pages, 7 figures

Although plasmonic nanotweezers can achieve manipulation on a scale smaller than the diffraction limit, direct trapping of sub-10~nm bioparticles in an aqueous environment without modifications remains challenging. Here, we demonstrate enzyme delivery-trapping and dynamic manipulation at the single-entity level by employing photothermal-assisted trapping via metamaterial optical tweezers at low trapping laser intensities. By analyzing the probability density function, we are able to distinguish dielectric particles from biomolecules. For enzyme-related data, the presence of two peaks in violin plots indicates conformational changes or interactions with the environment. We also observe that increasing the laser intensity increases the local temperature, resulting in enzyme aggregation. This study provides an alternative approach for identifying single enzymes and dielectric particles by combining plasmonic fields and photothermal heat, while paving the way for label-free characterization of biomolecules at the single-particle level.

Strategies for in-liquid micro-organism detection are crucial for the clinical and pharmaceutical industries. While Raman spectroscopy is a promising label-free technique for micro-organism detection, it remains challenging due to the weak bacterial Raman signals. In this work, we exploit the unique electromagnetic properties of metamaterials to identify bacterial components in liquid using an array of Fano-resonant metamolecules. This Fano-enhanced Raman scattering (FERS) platform is designed to exhibit a Fano resonance close to the protein amide group fingerprint around 6030 nm. Raman signatures of Escherichia coli were recorded at several locations on the metamaterial under off-resonance laser excitation at 530 nm, where the photodamage effect is minimized. As the sizes of the Escherichia coli are comparable to the micro-gaps, i.e 0.41 {\mu}m, of the metamaterials, its local immobilisation leads to an increase in the Raman sensitivity. We also observed that the time-dependent FERS signal related to bacterial amide peaks increased during the bacteria's mid-exponential phase while it decreased during the stationary phase. This work provides a new set of opportunities for developing ultrasensitive FERS platforms suitable for large-scale applications and could be particularly useful for diagnostics and environmental studies at off-resonance excitation., Comment: 15 pages, 5 figures

Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force and torque measurement at the femtonewton level, microrheology of complex fluids, single micro- and nanoparticle spectroscopy, single-cell analysis, and statistical-physics experiments. This roadmap provides insights into current investigations involving optical forces and optical tweezers from their theoretical foundations to designs and setups. It also offers perspectives for applications to a wide range of research fields, from biophysics to space exploration., Comment: 181 pages, 61 figures

Small composite objects, known as Janus particles, drive sustained scientific interest primarily targeted at biomedical applications, where such objects act as micro- or nanoscale actuators, carriers, or imaging agents. The major practical challenge is to develop effective methods for manipulation of Janus particles. The available long-range methods mostly rely on chemical reactions or thermal gradients, therefore having mediocre precision and strong dependency on the content and properties of the carrier fluid. To tackle these limitations, we propose the manipulation of Janus particles (here, silica microspheres half-coated with gold) by optical forces in the evanescent field of an optical nanofiber. We find that Janus particles exhibit stronger transverse localization and faster propulsion compared to all-dielectric particles of the same size. The propulsion speed recorded for a 3-$\mu$m particle with a 20-nm-thick gold cap averages at 2~$\mu$m/s per 1~mW of optical power, reaching 133 body length/s at 200~mW going through the nanofiber., Comment: 26 pages, 6 figures

Optical manipulation has attracted remarkable interest owing to its versatile and non-invasive nature. However, conventional optical trapping remains inefficient for the nanoscopic world. The emergence of plasmonics in recent years has brought a revolutionary change in overcoming limitations due to diffraction and the requirements for high trapping laser powers. Among the near-field optical trapping cavity-based systems, Fano resonant optical tweezers have a robust trapping capability. In this work, we experimentally demonstrate sequential trapping of 20 nm particles through the use of metamaterial plasmonic optical tweezers. We investigate the multiple trapping via trap stiffness measurements for various trapping positions at low and high incident laser intensities. Our configuration could be used as a light-driven nanoscale sorting device under low laser excitation. Our results provide an alternative approach to trap multiple nanoparticles at distinct hotspots, enabling new ways to control mass transport on the nanoscale., Comment: 5

The manipulation of microparticles using optical forces has led to many applications in the life and physical sciences. To extend optical trapping towards the nano-regime, in this work we demonstrate trapping of single nanoparticles in arrays of plasmonic coaxial nano-apertures with various inner disk configurations and theoretically estimate the associated forces. A high normalised experimental trap stiffness of 3.50fN/nm/mW for 20nm polystyrene particles is observed for an optimum design of 149nm for the nanodisk diameter at a trapping wavelength of 980nm. Theoretical simulations are used to interpret the enhancement of the observed trap stiffness. A quick particle trapping time of less than 8sec is obtained at a concentration of 14$\times$10$^{11}$ particles/ml with low incident laser intensity of 0.59mW/$\mu$m$^{2}$. This good trapping performance with fast delivery of nanoparticles to multiple trapping sites emerges from a combination of the enhanced electromagnetic near-field and spatial temperature increase. This work has applications in nanoparticle delivery and trapping with high accuracy, and bridges the gap between optical manipulation and nanofluidics., Comment: 12 pages, 4 figures

Plasmonic nanostructures can overcome Abbe's diffraction limit to generate strong gradient fields, enabling efficient optical trapping of nano-sized particles. However, it remains challenging to achieve stable trapping with low incident laser intensity. Here, we demonstrate a Fano resonance-assisted plasmonic optical tweezers (FAPOT), for single nanoparticle trapping in an array of asymmetrical split nano-apertures, milled on a 50 nm gold thin film. Stable trapping is achieved by tuning the trapping wavelength and varying the incident trapping laser intensity. A very large normalized trap stiffness of 8.65 fN/nm/mW for 20 nm polystyrene particles at a near-resonance trapping wavelength of 930 nm was achieved. We show that trap stiffness on resonance is enhanced by a factor of 63 compared to off-resonance conditions. This can be attributed to the ultra-small mode volume, which enables large near-field strengths and a cavity Purcell effect contribution. These results should facilitate strong trapping with low incident trapping laser intensity, thereby providing new options for studying transition paths of single molecules, such as proteins, DNA, or viruses., Comment: 28 pages, 7 figures

Nanofibre-based optical cavities are particularly useful for quantum optics application, such as the development of integrated single-photon sources, and for studying fundamental light-matter interactions in cavity quantum electrodynamics (cQED). Although several techniques have been used to produce nanofibre-based optical cavities, focussed ion beam (FIB) milling is becoming popular; it can be used for the fabrication of complex structures directly in the nanofibre. This technique uses a highly accelerated ion beam to remove atoms from the target material with high resolution. However, it is challenging to mill insulating materials with highly-curved structures and large aspect ratios, such as silica nanofibres, due to charge accumulation in the material that leads to mechanical vibrations and misalignment issues. In this article, we highlight the main features of nanofibres and briefly review cQED with nanofibre-based optical cavities. An overview of the milling process is given with a summary of different FIB milled devices and their applications. Finally, we present our technique to produce nanofibre cavities by FIB milling. To overcome the aforementioned challenges, we present a specially designed base plate with an indium tin oxide (ITO)-coated Si substrate and outline our procedure, which improves stability during milling and increases repeatability., Comment: The manuscript has 16 pages, 9 figures, and 3 tables, and it will be submitted to Applied Physics B: Laser and Optics

We experimentally demonstrate orbiting of isotropic, dielectric microparticles around an optical nanofiber that guides elliptically polarized fundamental modes. The driving transverse radiation force appears in the evanescent electromagnetic fields due to orbital angular momentum. The force direction is opposite to that of the energy flow circulation around the nanofiber. Our results verify the theoretically predicted negative optical torque on a sufficiently large particle in the vicinity of a nanofiber.

We study the force of light on a two-level atom near an ultrathin optical fiber using the mode function method and the Green tensor technique. We show that the total force consists of the driving-field force, the spontaneous-emission recoil force, and the fiber-induced van der Waals potential force. Due to the existence of a nonzero axial component of the field in a guided mode, the Rabi frequency and, hence, the magnitude of the force of the guided driving field may depend on the propagation direction. When the atomic dipole rotates in the meridional plane, the spontaneous-emission recoil force may arise as a result of the asymmetric spontaneous emission with respect to opposite propagation directions. The van der Waals potential for the atom in the ground state is off-resonant and opposite to the off-resonant part of the van der Waals potential for the atom in the excited state. Unlike the potential for the ground state, the potential for the excited state may oscillate depending on the distance from the atom to the fiber surface.

In this work, we demonstrate trapping of microparticles using a plasmonic tweezers based on arrays of annular apertures. The transmission spectra and the E- field distribution are simulated to calibrate the arrays. Theoretically, we observe sharp peaks in the transmission spectra for dipole resonance modes and these are redshifted as the size of the annular aperture is reduced. We also expect an absorption peak at approximately 1,115 um for the localised plasmon resonance. Using a laser frequency between the two resonances, multiple plasmonic hotspots are created and used to trap and transport micron and submicron particles. Experimentally, we demonstrate trapping of individual 0.5 um and 1 um polystyrene particles and particle transportation over the surface of the annular apertures using less than 1.5 mW/um2 incident laser intensity at 980 nm.

We have used a gold nanohole array to trap single polystyrene nanoparticles, with a mean diameter of 30 nm, into separated hot spots located at connecting nanoslot regions. A high trap stiffness of approximately 0.85 fN/(nmmW) at a low incident laser intensity of ~0.51 mW/um2 at 980 nm was obtained. The experimental results were compared to the simulated trapping force and a reasonable match was achieved. This plasmonic array is useful for lab-on-a-chip applications and has particular appeal for trapping multiple nanoparticles with predefined separations or arranged in patterns in order to study interactions between them.

We calculate the force of a near-resonant guided light field of an ultrathin optical fiber on a two-level atom. We show that, if the atomic dipole rotates in the meridional plane, the magnitude of the force of the guided light depends on the field propagation direction. The chirality of the force arises as a consequence of the directional dependencies of the Rabi frequency of the guided driving field and the spontaneous emission from the atom. This provides a unique method for controlling atomic motion in the vicinity of an ultrathin fiber., Comment: text and figures were revised, and a new discussion was added

We study spontaneous emission from a rubidium atom into the fundamental and higher-order modes of a vacuum-clad ultrathin optical fiber. We show that the spontaneous emission rate depends on the magnetic sublevel, the type of modes, the orientation of the quantization axis, and the fiber radius. We find that the rate of spontaneous emission into the TE modes is always symmetric with respect to the propagation directions. Directional asymmetry of spontaneous emission into other modes may appear when the quantization axis does not lie in the meridional plane containing the position of the atom. When the fiber radius is in the range from 330 nm to 450 nm, the spontaneous emission into the HE$_{21}$ modes is stronger than into the HE$_{11}$, TE$_{01}$, and TM$_{01}$ modes. At the cutoff for higher-order modes, the rates of spontaneous emission into guided and radiation modes undergo steep variations, which are caused by the changes in the mode structure. We show that the spontaneous emission from the upper level of the cyclic transition into the TM modes is unidirectional when the quantization axis lies at an appropriate azimuthal angle in the fiber transverse plane.

We experimentally realized an optical nanofiber-based cavity by combining a 1-D photonic crystal and Bragg grating structures. The cavity morphology comprises a periodic, triplex air-cube introduced at the waist of the nanofiber. The cavity has been theoretically characterized using FDTD simulations to obtain the reflection and transmission spectra. We have also experimentally measured the transmission spectra and a Q-factor of ~784(87) for a very short periodic structure has been observed. The structure provides strong confinement of the cavity field and its potential for optical network integration makes it an ideal candidate for use in nanophotonic and quantum information systems.

We present a systematic treatment of higher-order modes of vacuum-clad ultrathin optical fibers. We show that, for a given fiber, the higher-order modes have larger penetration lengths, larger effective mode radii, and larger fractional powers outside the fiber than the fundamental mode. We calculate, both analytically and numerically, the Poynting vector, propagating power, energy, angular momentum, and helicity (or chirality) of the guided light. The axial and azimuthal components of the Poynting vector can be negative with respect to the direction of propagation and the direction of phase circulation, respectively, depending on the position, the mode type, and the fiber parameters. The orbital and spin parts of the Poynting vector may also have opposite signs in some regions of space. We show that the angular momentum per photon decreases with increasing fiber radius and increases with increasing azimuthal mode order. The orbital part of angular momentum of guided light depends not only on the phase gradient but also on the field polarization, and is positive with respect to the direction of the phase circulation axis. Meanwhile, depending on the mode type, the spin and surface parts of angular momentum and the helicity of the field can be negative with respect to the direction of the phase circulation axis., Comment: 24 pages, 22 figures

Particles trapped in the evanescent field of an ultrathin optical fibre inter-act over very long distances via multiple scattering of the fibre-guided fields. In ultrathin fibres that support higher order modes, these interac-tions are stronger and exhibit qualitatively new behaviour due to the cou-pling of different fibre modes, which have different propagation wave-vectors, by the particles. Here, we study one dimensional longitudinal opti-cal binding interactions of chains of 3 {\mu}m polystyrene spheres under the influence of the evanescent fields of a two-mode microfibre. The observa-tion of long-range interactions, self-ordering and speed variation of parti-cle chains reveals strong optical binding effects between the particles that can be modelled well by a tritter scattering-matrix approach. The optical forces, optical binding interactions and the velocity of bounded particle chains are calculated using this method. Results show good agreement with finite element numerical simulations. Experimental data and theoreti-cal analysis show that higher order modes in a microfibre offer a promis-ing method to not only obtain stable, multiple particle trapping or faster particle propulsion speeds, but that they also allow for better control over each individual trapped object in particle ensembles near the microfibre surface.

While conventional optical trapping techniques can trap objects with submicron dimensions, the underlying limits imposed by the diffraction of light generally restrict their use to larger or higher refractive index particles. As the index and diameter decrease, the trapping difficulty rapidly increases; hence, the power requirements for stable trapping become so large as to quickly denature the trapped objects in such diffraction-limited systems. Here, we present an evanescent field based device capable of confining low index nanoscale particles using modest optical powers as low as 1.2 mW, with additional applications in the field of cold atom trapping. Our experiment uses a nanostructured optical micro-nanofiber to trap 200 nm, low index contrast, fluorescent particles within the structured region, thereby overcoming diffraction limitations. We analyze the trapping potential of this device both experimentally and theoretically, and show how strong optical traps are achieved with low input powers., Comment: 13 pages, 6 figures

Precise control of particle positioning is desirable in many optical propulsion and sorting applications. Here, we develop an integrated platform for particle manipulation consisting of a combined optical nanofibre and optical tweezers system. Individual silica microspheres were introduced to the nanofibre at arbitrary points using the optical tweezers, thereby producing pronounced dips in the fibre transmission. We show that such consistent and reversible transmission modulations depend on both particle and fibre diameter, and can be used as a reference point for in situ nanofibre or particle size measurement. Thence, we combine scanning electron microscope (SEM) size measurements with nanofibre transmission data to provide calibration for particle-based fibre assessment. This integrated optical platform provides a method for selective evanescent field manipulation of micron-sized particles and facilitates studies of optical binding and light-particle interaction dynamics., Comment: this article supersedes arXiv:1401.1550