Search

COVID-19 has represented a watershed in people's lifestyle. One important consequence has been the change in how people buy groceries online/offline that represent the most frequent shopping-related trip any household performs. Since this has substantially different transport and environmental implications, it is crucial to investigate what are the COVID-19-induced variations. This paper estimates both travel and environmental impacts grocery channel choice implies by comparing, in a diachronic fashion, the pre and during COVID-19 situation in Norway, considering alternative scenarios describing different service configurations for each channel considered. Stated preferences are used to estimate market shares for grocery purchase distinguishing between different channels: in-store, home delivery and click&pick. The robust comparative analysis between the two time periods is guaranteed by the use of the same methodological approach in the same geographical context. Results show that total emissions are lower during the pandemic and adopting a free delivery strategy not only increases home delivery market shares but also produces the lowest level of CO2 emissions regardless of COVID-19. The results obtained are particularly relevant in the "new normal" the world is experiencing both from a public policymaking perspective, when promoting transport-related interventions to curb emissions, and from a private standpoint, when customising market strategies to increase sales and profits. • COVID-19 has represented a watershed in people's lifestyle. • Investigating changes in how people buy groceries online/offline is important. • Stated preferences are used to estimate grocery market shares for different channels. • The paper estimates travel and environmental impacts pre and during COVID-19 via scenario analysis. • Results are particularly relevant for both the public and private sector in the "new normal" conditions. [ABSTRACT FROM AUTHOR]

The last-mile delivery challenges and complexity are increasing simultaneously with the e-commerce growth, the e-commerce growth constitutes a threat to urban transport, especially for big cities and developing countries. This paper examines the economic impact of crowd-shipping based on public transport collaborated with the automated parcel locker and the impact of traditional delivery, as two different methods of last-mile delivery under the same circumstances. This paper aims to assess crowd-shipping as an alternative solution for last-mile delivery compared to traditional delivery. Data has been simulated based on Cairo reality, one of the largest cities in the world. The mathematical models were formulated for the problem, where the first model objective function minimizes the costs of vehicle possession and vehicle kilometers traveled, while the second model objective function minimizes the costs of establishing lockers, vehicle possession, and vehicle kilometers traveled. A genetic algorithm has been used due to the complexity of the problem. The results show that the economic impact of the crowd-shipping delivery system is better than the traditional delivery system under the conditions of large-sized and medium-sized demand, while the economic impact of traditional delivery is better than the crowd-shipping delivery system under the conditions of small-sized demand. [ABSTRACT FROM AUTHOR]

Background: Urban freight transport has recently garnered significant attention from both professionals and academics due to its pivotal role in fostering economic and social development. Despite notable progress, this sector faces challenges that hinder its long-term sustainability. Addressing these issues and ensuring the lasting sustainability of urban freight transport require a thorough assessment and monitoring process utilizing specific indicators. Methods: This paper introduces a set of indicators developed using a three-step methodology aimed at assessing the sustainability progress of urban freight transport. Initially, we present a long list of indicators drawn from the existing literature. Subsequently, we consider five essential properties: achievability, data availability, predictability, relevance, and comprehensibility. Lastly, we apply a multi-criteria analysis methodology that utilizes these properties to assess the long lists encountered during the selection process. The chosen indicators are those that do not register a value of "0" for any of the specified properties. To enhance reliability, the indicators are collaboratively identified by a minimum of two experts. Results: By carefully selecting 18 indicators based on five sustainability dimensions (economic, environmental, social/societal, political, and spatial), our approach ensures a robust evaluation framework. Conclusions: These indicators serve as valuable tools for stakeholders in comprehensively evaluating the sustainability aspects of urban freight transport. [ABSTRACT FROM AUTHOR]

Freight transport significantly contributes to urban traffic but is often overlooked by decision-makers compared to passenger transport. Conventional transportation modelling studies often use aggregate approaches for freight transport, undoubtedly due to the difficulty of data collection. However, the nature of freight transportation is much more complex. For this reason, examining the determinants of freight vehicle preferences with discrete approaches is crucial for the contributions that can be put forward, especially in local studies. To address this apparent gap in the study of local disaggregated approaches to freight transport, we present a discrete modelling-based methodology to investigate the factors that determine freight vehicle preferences for shippers and senders. The estimated nested logit model is constructed with the RU2 approach, the second part of random utility theory, thus avoiding the theoretical inconsistencies that arise when generic coefficients are used. As a result, the model structures provided satisfactory results compared to the literature. It was revealed that the factors affecting freight vehicle choice preferences were influenced by packaging preferences and differed according to freight groups. This local study is the first nested logit study for freight modelling in Istanbul and it is aimed to shed light on future national studies.

The implementation of construction projects largely determines the development of modern cities. However, such projects impact both urban freight transport and residents. To reduce this impact, increasingly more attention has been paid to the issues of sustainable development. Sustainable urban freight transport has become a priority for European cities. It also contributes to construction supplies. This article presents the results of analyzing construction supplies and the assessment of their compliance with the principles of sustainable development using the example of the city of Szczecin. This allows for the diagnosis of problems in this area, and solutions in the field of sustainable construction are collected. The presented research includes unstructured observation of construction projects in progress, structured interviews with entities implementing construction projects in Szczecin, and additional expert research to identify solutions in the field of sustainable construction supply in cities. This enables the research objective to be achieved and conclusions to be developed. [ABSTRACT FROM AUTHOR]

Light commercial vehicles that operate in last-mile deliveries are significant contributors to greenhouse gas emissions. For this reason, carbon footprint mitigation actions have become a key issue for companies involved in urban freight transport to put the organization in line with the future EU legislative framework. In this sense, the electrification of the delivery fleets is one of the actions carried out to improve the sustainability of transport operations. To this end, fleet managers have to explore several fleet renewal strategies over a finite planning horizon, evaluating different types of electric powertrains for light commercial vehicles. To address this concern, this paper presents a purpose-built analysis to assist and boost the fleet managers' decisions when transitioning to electrified vans, intending to maximize cost savings and reduce corporate greenhouse gas emissions inventory. The model developed for this research work is a Multi-Objective Linear Programming analysis for the optimization of the total cost of ownership and the organizational transport-related emissions reported from all scope categories according to the Greenhouse Gas Protocol standards. This analysis is applied to three types of electric vans (battery electric, hydrogen fuel cell, and range extender hybrid electric/hydrogen fuel cell), and they are compared with an internal combustion van propelled with natural gas. From this perspective, the conducted research offers a novel approximation to fleet replacement problems considering organization emission reporting and long-term budgetary objectives for vehicles and their respective refueling infrastructure. The comprehensive numerical simulations carried out over different study scenarios in Spain demonstrate that the optimization approach not only shows effective fleet renewal strategies but also identifies critical factors that impact the fleet's competitiveness, offering valuable insights for fleet managers and policymakers. The findings indicate that in Spain, battery electric and hydrogen range extender light commercial vehicles stand as a competitive option. Substituting a natural gas-powered van with an electrified alternative can reduce an organization's inventory emissions by up to 77% and total costs by up to 24%. Additionally, this study also points out the influence of energy supply pathways and the emissions from relevant scope 3 categories. [ABSTRACT FROM AUTHOR]

Urban public space is often provided for freight delivery operations in the form of on-street (un)loading zones (LZ). Since public space is scarce and demanded by several users, city authorities have the challenge of managing LZ by gaining knowledge about freight curbside needs and utilization. Although technological solutions and enforcement practices have become popular among policymakers to capture curbside dynamics, there is still an open and promising research field for designing analytical frameworks that shape LZ decision-making processes. This fact has motivated the authors to define the concept of Smart Loading Zones (SLZ) as the involvement of technology and data analytics in the planning and management of LZ in a responsive and user-oriented way. Besides proposing a conceptual approach for the study of SLZ, this paper implements data analytics tools for enhancing decisions on LZ network design, using the City of Vic (Spain) as a case study. The machine learning techniques k-means++, DBSCAN, and integer linear programming prescribed the LZ number, location and service assignment based on establishments' coordinates, walking distances and freight demand. Results from the case study showed how an optimized number, location, and size of LZ improved occupation levels, i.e., from 18 % to 80 %, while freeing up curbside space for other users. Service coverage was also improved by allocating LZ to establishments within walking distances no greater than 75 m. Further development of methods and tools for SLZ at tactical and operational decisions are recommended for future studies.

Urban transport system planning has been moving towards sustainability in recent years, and the concept of urban freight logistics is an integral part of this planning. Urban freight logistics involves many stakeholders that participate in its operation and should be considered in the system planning process. The paper presents one of the approaches to the methodology for the selection of key indicators suitable for the evaluation and monitoring of a sustainable system of urban freight logistics in such a way that it reflects as much as possible the needs of all involved stakeholders. This is done by applying the selected method of multi-criteria analysis with the involvement of various urban freight logistics stakeholders. Based on the proposed methodology, the paper defines significant indicators that can be considered for further evaluation of the level of a sustainable urban freight logistics system. In addition to the possibilities of further development of this methodology, the application of determined significant indicators for calculating the proposed index of sustainable urban freight logistics is discussed. The proposed procedure can be implemented in the preparatory steps in the framework of the creation of sustainable urban logistics plans (SULPs).

The number of people living in cities worldwide is rising and hence also the number of goods that have to be transported in cities. Accordingly cities seek to employ sustainability initiatives to mitigate the negative effects of (freight) transportation such as traffic jams, emissions and noise. This paper collects different sustainability initiatives implemented in Europe in the last ten years. It analyzes the projects, provides a classification and derives lessons learned. That way recommendations to city planners can be formulated.

This article aims to analyze the opportunities related to improvement in the decarbonization strategies of the logistics sector, considering the economic, environmental, social, and technological challenges in four Latin American countries: Argentina, Brazil, Peru, and Uruguay. An original survey of 464 logistics companies involved in e-commerce in these four countries was carried out. From an economic point of view, companies have started to understand that being greener is not just a slogan but can be an opportunity for growth. The social pressure of customers for more sustainable supply chains forces companies to look for alternatives to reduce their environmental footprint. Finally, adding technology makes it possible to measure and monitor parameter indicators and look for alternatives to improve them (such as routing algorithms, electric vehicles, smart lockers, etc.). Decarbonization in the e-commerce logistics sector in Latin American countries still has room for improvement (for example, using metrics and electric vehicles) to match the levels of companies with similar characteristics in European, Asian, or North American countries. [ABSTRACT FROM AUTHOR]

Knowledge about the perception of stakeholders regarding the effectiveness of last-mile bicycle deliveries is essential to promote solutions at a local and national level. However, their use is an incipient solution in the Brazilian context. This paper aims to analyse the potential of performing last-mile bicycle deliveries according to the perspective of Brazilian logistics operators. First, the variables that affect the decision of logistic operators to adopt bicycles were captured using the theory of planned behaviour. Later, the intention of behaviour was measured by estimating an ordered logistic regression. The results showed that environmental awareness, public policies and weather conditions negatively influence the intention of logistics operators to perform last-mile bicycle deliveries in Brazil. However, these variables are more cultural than operational, and could be changed by awareness of the importance of performing last-mile bicycle deliveries to promote sustainable cities. Additionally, the findings could encourage the development of sustainable freight policies from private companies to achieve sustainable future transportation.

Since the 1990s, studies and pilot tests have been conducted to reduce traffic, accidents, and pollution due to urban freight transport (UFT). These ended up in several policies, regulations, and restrictions for UFT, such as low emission zones, delivery time windows, and vehicle size and weight restrictions. However, issues in UFT under regulatory measures still persist. This study introduces an optimization framework for deriving an optimal combination of various types of vehicles with different capacities for vehicle replacement with UFT. This framework allows an understanding of how an urban freight company with a limited budget efficiently satisfies its freight demand within an urban area in the presence of regulatory measures by urban administrators. The introduced formulation, which is mixed-integer linear programming, will assist the operator in choosing the best investment strategy for introducing new vehicles of certain types and sizes, for operation in different zones, into its fleet while gaining economic benefits and having a positive impact on the liveability of the urban area. Furthermore, an elasticity analysis is performed to consider the effects of specific uncertain parameters on the total cost. The numerical results show that the share of electric vehicles in the fleet increases, and they are more competitive than diesel vehicles. [ABSTRACT FROM AUTHOR]

Recently, many European local authorities have set up Urban Consolidation Centres (UCC) for dealing with challenges arising from the environmental and social impacts of logistical activities in urban contexts through shipment synchronisation and carrier coordination policies. However, the number of successful UCC projects led by local authorities in Europe is low, with most of the UCCs failing to achieve financial sustainability after the initial experimental phase, which is often heavily supported by public funds. In order to propose mechanisms that could favour the economic and financial sustainability of UCC systems, this research develops an adaptation of game-theoretic approaches to the problems of responsibility and cost allocation among stakeholders participating in a UCC delivery network. A solution based on the Shapley Value concept is employed to derive cost allocations; applications of the model to a real-world scenario are evaluated. An extensive sensitivity analysis shows that the proposed cost allocation rules can provide alternative arrangements, based on extended responsibility concepts, which can alleviate the burden on local authorities for the set up of UCCs. As such, results provide useful policy and practice implications on how to safeguard UCCs' viability under different scenarios, including the outsourcing of the last-mile deliveries. [ABSTRACT FROM AUTHOR]

Online retail channels increasingly shape consumers' purchase behaviour: we access a diversity of product types through web-shops; employ both smartphones and digital screens in stores; navigate the retail space by browsing online; and order pantry items, fresh groceries as well as prepared foods to be delivered at our doorsteps. The profound impact of online retail on mobility in cities, where the concentration of consumers resides, is, therefore, an extensively investigated and growing topic of interest in research. In the field of urban logistics, studies that evaluate the various impacts of e-commerce or propose efficiency or sustainability-enhancing applications are plentiful. Regardless, the general lack of solid urban e-commerce logistics data is supported widely. In this study, we systematically review the literature to identify and compare the types of e-commerce data that are currently known, employed and disclosed in urban logistics research as well as the data sources that provide access to them. Within the set of identified data, knowledge concentrates on consumer preferences and number of deliveries related to e-commerce. However, our findings confirm the general data paucity, specifically on delivery trip-related information such as deliveries per trip, number of delivery rounds and vehicle specificities. Discrepancies are found in methodologies to collect and compile data, as well as data units used (e.g., orders, parcels, deliveries) that cause large variations in information possibly diverging from reality. The study contributes to current literature and practice by compiling and analysing currently available data on urban e-commerce logistics and by presenting recommendations and best practices for future enhancements in this research field. Based on the systematic literature review, we propose a common data agenda for urban e-commerce logistics research, focused on addressing data gaps and topics that are under-developed and un-developed; pursuing data collection standardisation; disclosing data collection methodologies and sources; and specifying temporal and spatial information as well as units of data. Some data methodologies and sources can be recommended for future research: using interviews to collect quantitative data; collaborating with sector organisations; exploring open maps; employing existing household and time use surveys; and leveraging technological opportunities and new ways of collecting data. [ABSTRACT FROM AUTHOR]

Knowledge about the perception of stakeholders regarding the effectiveness of last-mile bicycle deliveries is essential to promote solutions at a local and national level. However, their use is an incipient solution in the Brazilian context. This paper aims to analyse the potential of performing last-mile bicycle deliveries according to the perspective of Brazilian logistics operators. First, the variables that affect the decision of logistic operators to adopt bicycles were captured using the theory of planned behaviour. Later, the intention of behaviour was measured by estimating an ordered logistic regression. The results showed that environmental awareness, public policies and weather conditions negatively influence the intention of logistics operators to perform last-mile bicycle deliveries in Brazil. However, these variables are more cultural than operational, and could be changed by awareness of the importance of performing last-mile bicycle deliveries to promote sustainable cities. Additionally, the findings could encourage the development of sustainable freight policies from private companies to achieve sustainable future transportation. [ABSTRACT FROM AUTHOR]

Many negative externalities are associated with home deliveries, the main ecommerce delivery destination. Despite many solutions that address this problem, the lack of understanding of the spatial pattern of urban deliveries makes it challenging to implement these strategies. This paper analyzed the spatial relationship between sociodemographic, retail and e-commerce deliveries in Belo Horizonte (Brazil) by using official data at the neighborhood level (number of retail shops, gender, income, age, race, and household size), and e-commerce deliveries performed by a transportation company. Global Moran's I indicated the spatial dependence of the e-commerce deliveries. Results of a geographically weighted regression model showed a positive spatial effect of retail, women, Asian population, age from 20 to 29 years old, and income. In addition, a negative spatial effect was identified for the size of the household, 18 to 19 years old, and the black population. Furthermore, the estimated coefficients show small spatial variability, indicating homogeneity in the spatial relation. The uniformity of the parameters indicates that alternative strategies can be implemented throughout the territory to reduce e-commerce deliveries.

Background: Urban freight transport has recently garnered significant attention from both professionals and academics due to its pivotal role in fostering economic and social development. Despite notable progress, this sector faces challenges that hinder its long-term sustainability. Addressing these issues and ensuring the lasting sustainability of urban freight transport require a thorough assessment and monitoring process utilizing specific indicators. Methods: This paper introduces a set of indicators developed using a three-step methodology aimed at assessing the sustainability progress of urban freight transport. Initially, we present a long list of indicators drawn from the existing literature. Subsequently, we consider five essential properties: achievability, data availability, predictability, relevance, and comprehensibility. Lastly, we apply a multi-criteria analysis methodology that utilizes these properties to assess the long lists encountered during the selection process. The chosen indicators are those that do not register a value of “0” for any of the specified properties. To enhance reliability, the indicators are collaboratively identified by a minimum of two experts. Results: By carefully selecting 18 indicators based on five sustainability dimensions (economic, environmental, social/societal, political, and spatial), our approach ensures a robust evaluation framework. Conclusions: These indicators serve as valuable tools for stakeholders in comprehensively evaluating the sustainability aspects of urban freight transport.

The surge in online shopping has contributed in no small part to the return of warehouses in cities. Urban warehouses allow retail and delivery companies to serve consumer populations faster. They are also a necessary condition for the transition to an urban logistics system that is efficient and sustainable. However, integrating urban warehouses into dense, mixed-use urban areas presents considerable challenges, particularly in coexistence with surrounding communities. This study explores how urban warehouses can become good neighbors, through a case study of New York City. The city has a high e-commerce demand and high population density. In addition, zoning regulation and administration in particular have enabled the development of several warehouses in recent years. The study introduces seven types of practices that can promote the proper integration of warehouses in cities. Scaled from the system (i.e., the city) to the site (i.e., the warehouse), best practices include the following: zoning for innovation as well as nuisance monitoring and mitigation, environmental policy for movement and place, supply chain awareness for citizens/consumers, blocks and buffers for neighborhood design, community conversation, sustainable transportation transition for goods as well as people, and context-sensitive building design.

Canals and canalized rivers form a major part of surface water systems in European delta cities and societal ambitions to use these waters increase. This is the first assessment of how suitability of these waters can improve for three important uses: transportation, thermal energy extraction (TEE) and recreation. We assess suitability with Suitability Indices (SIs) and identify which alterations in the water system are needed to improve SI scores in Amsterdam, The Netherlands, and Ghent, Belgium. The results show spatial variability in suitability scores. Current suitability for transportation is low (SI score = 1) to excellent (SI score = 4), for TEE fair (SI score = 2) to excellent (SI score = 4), and suitability for recreation is low (SI score = 1). Suitability could improve by enlarging specific waterway dimensions, increasing discharge and clarity, and by enhancing microbiological water quality. The same methodology can be applied to optimize designs for new water bodies and for more water uses. [ABSTRACT FROM AUTHOR]

Utilizing rail transit system for collaborative passenger-and-freight transport is a sustainable option to conquer urban congestion. This study proposes effective modeling and optimization techniques for planning a city-wide metro-based underground logistics system (M-ULS) network. Firstly, a novel metro prototype integrating retrofitted underground stations and newly-built capsule pipelines is designed to support automated inbound delivery from urban logistics gateways to in-city destinations. Based on four indicators (i.e. unity of freight flows, regional accessibility, environmental cost-saving, and order priority), an entropy-based fuzzy TOPSIS evaluation model is proposed to select appropriate origin-destination flows for underground freight transport. Then, a mixed integer programming model, with a well-matched solution framework combining multi-objective PSO algorithm and A* algorithm, are developed to optimize the location-allocation-routing (LAR) decisions of M-ULS network. Finally, real-world simulation based on Nanjing metro case is conducted for validation. The best facility configurations and flow assignments of the three-tier M-ULS network are reported in details. Results confirm that the proposed algorithm has good ability in providing high-quality Pareto-optimal LAR decisions. Moreover, the Nanjing M-ULS project shows strong economic feasibility while bringing millions of Yuan of annual external benefit to the society and environment. [ABSTRACT FROM AUTHOR]

With the growing demand for urban freight transportation, trucks emit a large amount of pollutants such as particulate matters and nitrogen oxides, increasingly affecting public health. This study establishes a modelized air dispersion structure to simulate pollutant concentration distribution. By integrating multiple data sources including mobile phone signals and satellite images, we reconstruct the daily trajectories of individuals and further incorporate simulated pollution concentrations in calculating dynamic and static exposure of individuals to truck emissions. Econometric models considering spatial dependence are developed to evaluate the influencing factors and elucidate the mechanisms of pollutant exposure. Results show factors including freight demand, road network, residential and employment locations, personal commuting distance, and population age structure matter in assessing truck emission exposure. As a result, a mixture of vehicular emission standards, urban traffic control, land planning, and industrial policies is proposed to reduce truck pollutant exposure and safeguard public health. [ABSTRACT FROM AUTHOR]

The impact of the COVID-19 pandemic on e-commerce is evident and well-reported. However, few studies have measured the effect of restrictive measures on e-commerce. Therefore, this article aims to explore the causal effect of the COVID-19 pandemic on parcel deliveries. For this purpose, different techniques (interrupted time series analysis, counterfactual analysis, and structural equation modelling) were used to verify to what extent the number of cases and deaths from COVID-19 and the rigour of the restriction measures (measured by the stringency index) increased parcel deliveries in Belo Horizonte, Brazil. The results confirm the causal effect of the stringency index that positively influences parcel deliveries. The marginal effect of the stringency index on parcel deliveries was 5.44 deliveries per day during the pandemic compared to before the pandemic. This result means that each unit of stringency index increases the number of parcel deliveries by 5.44. The effects vary depending on the technique used; however, all showed the contribution of stringency index on parcel deliveries. [ABSTRACT FROM AUTHOR]

Abstract The option of decarbonizing urban freight transport using battery electric vehicle (BEV) seems promising. However, there is currently a strong debate whether fuel cell electric vehicle (FCEV) might be the better solution. The question arises as to how a fleet of FCEV influences the operating cost, the greenhouse gas (GHG) emissions and primary energy demand in comparison to BEVs and to Internal Combustion Engine Vehicle (ICEV). To investigate this, we simulate the urban food retailing as a representative share of urban freight transport using a multi-agent transport simulation software. Synthetic routes as well as fleet size and composition are determined by solving a vehicle routing problem. We compute the operating costs using a total cost of ownership analysis and the use phase emissions as well as primary energy demand using the well to wheel approach. While a change to BEV results in 17–23% higher costs compared to ICEV, using FCEVs leads to 22–57% higher costs. Assuming today’s electricity mix, we show a GHG emission reduction of 25% compared to the ICEV base case when using BEV. Current hydrogen production leads to a GHG reduction of 33% when using FCEV which however cannot be scaled to larger fleets. Using current electricity in electrolysis will increase GHG emission by 60% compared to the base case. Assuming 100% renewable electricity for charging and hydrogen production, the reduction from FCEVs rises to 73% and from BEV to 92%. The primary energy requirement for BEV is in all cases lower and for higher compared to the base case. We conclude that while FCEV have a slightly higher GHG savings potential with current hydrogen, BEV are the favored technology for urban freight transport from an economic and ecological point of view, considering the increasing shares of renewable energies in the grid mix.

Increasing congestion, environmental pollution, and the resulting full impatience of inhabitants contribute to the search for new solutions to move around the city. Therefore, city dwellers are increasingly turning to alternative means of transport such as bicycles, scooters, monocycles, etc. Recently, this way of traveling around the city has been flourishing. Therefore, the authors decided to investigate the phenomenon of the popularization of alternative forms of urban transport and to determine the influence of this kind of travel on freight transport and sustainable urban development. The research was based on four Polish cities: Wroclaw, Katowice, Opole, and Kedzierzyn-Kozle. The selection was made more precise by indicating two large and two small urban centers. The research was carried out by means of a questionnaire survey addressed to the inhabitants of those centers, specifying their preferences regarding journeys in the cities, as well as through direct interviews with companies providing cargo transport in the cities. The final part of the study is to propose solutions that, based on the residents' preferences, will reduce their travel by car in favor of alternative transport, thus enhancing freight transport. [ABSTRACT FROM AUTHOR]

Integrating freight and public transport infrastructure can lead to providing economic feasibility to public transportation systems and reducing externalities related to urban freight transport. This can be achieved by sharing the infrastructure of freight and public transportation systems. Additionally, failed deliveries represent a major challenge in e-commerce. Lockers can address this problem and promote sustainable urban freight transport. This paper identified a locker network in a public transportation infrastructure. The framework considered scenarios built under the 15-min city concept, and the analysis is based on a case study in Jaraguá do Sul (Brazil, a mid-sized Brazilian city, and its conurbated area. The networks were found by solving a p-median problem, which minimised the maximum distance between the lockers and the population. The findings showed that, in the best scenario with 16 lockers, the population could reach the lockers within a 10-min cycling ride. Additionally, the results showed that the public transportation network provides a locker network to integrate freight and public transportation. The locker network is accessible to public transportation and micromobility users. With this solution, residents play an active role in last-mile deliveries. In addition, lockers can work as mini hubs for crowdshipping services. In addition to reducing urban delivery trips, this solution can encourage public transportation usage, which contributes to more sustainable cities. [ABSTRACT FROM AUTHOR]

Freight trip generation modelling is important for forecasting freight movements, and understanding freight movements is crucial to enabling sustainable freight transportation planning. The existing literature focuses on model development, and most of the previous models are estimated by ordinary least squares regression. However, few studies have carefully considered the OLS assumptions. The objective of this paper is to estimate freight trip generation models using deliveries to commercial establishments in Brazilian municipalities. A procedure is described to estimate models by ordinary least squares (OLS), and alternative techniques are considered to address the violations of the OLS assumptions. The analysis was conducted with data from 860 commercial establishments in nine Brazilian municipalities, and models were estimated for capital, non-capital, small, medium, and larger municipalities. The findings showed that alternative techniques to OLS regression can provide better-estimated parameters and more accurate results. Not evaluating the OLS assumptions could compromise the quality of the model and, consequently, planning using these models. Moreover, the results showed that the number of employees has a more significant influence in small cities and a lower influence in medium-sized municipalities. Finally, the findings demonstrated the importance of local models that include the municipalities' characteristics and that can support freight transportation planning. These models can also include sustainable strategies for freight transport. [ABSTRACT FROM AUTHOR]

The location of warehouses is strategic for urban goods distribution, and the decision factors are subjective. This paper aims to analyse the contributing factors to warehouse location and describe the association between local attributes and the explanatory variables of a Warehouse Freight Trip Generation Model (WFTGM). We developed this study using data from 42 warehouses located in Belo Horizonte (Brazil). The results indicated that the accessibility to/from warehouses and the land cost are the most critical factors contributing to warehouse location decision. Additionally, the accessibility of trucks for delivery has a strong positive correlation with the accessibility of freight vehicles for loading. The land cost negatively correlates with all factors except the employee's accessibility, indicating an antagonistic relationship with other variables. Considering the Warehouse Freight Trip Generation Model, the warehouse-size related variables provided the best-fit models. Additionally, the warehouse size is not independent of the neighbourhoods' population and distance to the main ring roads traversing this city. The results support the development of public policies related to new warehouses' licensing process and offer guidance on warehouses' location in urban areas. [ABSTRACT FROM AUTHOR]

The urban freight sector provides an essential service by delivering goods that are required by shops, companies, and households at a specific place and time. However, the growth of e-commerce and the dawn of on-demand logistics (hereinafter ODL) have raised citizens' expectations of logistics systems, further stressing them and thereby increasing their operational and environmental costs. To the authors' best knowledge, there are no extensive literature reviews specifically on the topic of ODL and on suggestions for policy prioritisation for tackling its effects. This paper aims at addressing this issue by providing an extensive literature review of ODL and its enablers. This research, after a thorough explanation of the ODL rationale, its trends, and its effects, analyses possible solutions to its inefficiencies, focusing on enablers and barriers. Furthermore, it illustrates and clarifies the role of external factors in influencing ODL. Finally, it proposes a systematic evaluation approach by identifying knowledge gaps and consequently defining the subsequent actions needed, broken down by the individual influencing components, rendering these solutions compatible with the status quo and effective for solving the highlighted issues. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic exposed the fragility of the supply chains, in which the production, distribution, and transportation systems were disrupted, permanently or temporarily. Despite the enormous influences the pandemic had on transportation systems, no study has yet assessed the extent to which the freight restrictions and barriers influenced logistics costs after the start of the COVID-19 outbreak. However, understanding them is necessary to guide and stimulate public policies that intend to optimize the effects of freight restrictions on logistics costs. Thus, this paper assesses and compares the effects that such barriers in urban freight transport, and the restrictions imposed on freight vehicles, had on logistics costs before and during the pandemic. We surveyed more than 120 logistics professionals in Brazil in both 2018 and 2020/2021, making comparisons using models that were assessed using partial least squares structural equation modelling. The findings suggest that barriers and freight restrictions influenced the logistics costs positively, but such influences reduced during the pandemic. Being aware of the barriers and restrictions that influence logistics costs and of how the pandemic increased the effects of some restrictions is essential for managers to be able make timely and appropriate decisions and to plan and implement initiatives to prevent or reduce costs. [ABSTRACT FROM AUTHOR]

This document diagnoses the effects of the Modifiable Areal Unit Problem (MAUP) in the study of the demand for urban freight transport, by means of a comparison of different analysis scales to determine the relevance of working with different levels of detail. It is recommended to analyze the number of retail businesses, because they are the ones that mainly attract urban freight transport, and other variables of a socio-territorial type, considering three different spatial units: basic geostatistical area, electoral section, and regular 500-by-500-meter grids. For each scale, descriptive statistics parameters, correlation between variables, as well as global and local spatial autocorrelation (Moran-LISA's I) were obtained to determine the impact of the MAUP. The results obtained show that the electoral sections do not result in an adequate scale, unless it is used as a complementary scale, since the statistical results indicate a greater variation. However, its cartographic representation allows seeing spatial groupings that are not observed in the other scales, which can be a valuable contribution. In the case of the Basic Geostatistical Area (BGA) scale and the 500-by-500-meter grids, data show less dispersion. The variables analyzed show a greater correlation and present a greater global spatial autocorrelation, which is why it is determined that they may be the most appropriate scales to model the transport of merchandise in the study area. The site that had no discrepancy, regardless of the scale of analysis, was the historic downtown of the city of Toluca, so it can be considered a priority site based on its demand for merchandise and territorial characteristics, where regulation and transport control alternatives can be incorporated, as well as the creation of infrastructure to make deliv-eries more efficient and to mitigate its negative impacts. [ABSTRACT FROM AUTHOR]

Urban Freight Transport (UFT) is responsible for moving goods in urban areas to meet citizens' demands, which makes it essential for economic development. Simultaneously, UFT contributes to adverse impacts on society and the environment, including congestion and pollution. This paper assesses how the urban infrastructure and UFT externalities influence the residents' quality of life. Three major assumptions were considered: (i) Public managers are responsible for the urban infrastructure, which is also influenced by businesses; (ii) UFT leads to negative externalities, which are influenced by government actions; and (iii) both infrastructure and externalities influence the residents' quality of life. The analysis is based on a web-based survey conducted with residents of Brasília, Brazil. Structural Equation Modelling with Partial Least Squares was used to analyze the data. Findings showed that the residents' quality of life is negatively influenced by UFT externalities and positively influenced by the urban infrastructure. Furthermore, both public and private management have more influence on externalities when compared to urban infrastructure. Finally, road capacity, proper loading and unloading, and supervision should be prioritized to improve citizens' quality of life in Brasília. [ABSTRACT FROM AUTHOR]

Charging services play an important role in encouraging the growth of the electric freight vehicle (EFV) market. Understanding charging strategies and their influence on charging behavior is crucial in the deployment of charging services. Unfortunately, existing charging strategy definitions and types are incoherent and incomplete. This conceptual paper synthesizes the perspectives found in literature on the charging strategy concept, and provides a definition based on Orlikowski's structurational model of technology. A two-level charging strategy typology is proposed. The first distinguishes between decision-making modes: schedule- or trigger-based decisions. The second identifies when and where charging is used during a vehicle operating cycle. The result is three schedule-based charging strategies: downtime, opportunity, and intrusive charging, and one trigger-based emergency charging. The selection of strategy depends on the EFV operations, the availability of charging systems and services, as well as the driver behaviour. The influence of the strategy on enhancing the EFV, the carrier operations and business model is discussed. Charging behaviour, especially in location and timing, is shown to be strongly dependent on the strategy. While downtime charging is considered the default strategy, carriers should employ a variety of complementary strategies to enhance the capability of their vehicles and improve the financial viability of the operations. Carriers should also have an emergency charging strategy on hand in case of unforeseen situations. [ABSTRACT FROM AUTHOR]

The option of decarbonizing urban freight transport using battery electric vehicle (BEV) seems promising. However, there is currently a strong debate whether fuel cell electric vehicle (FCEV) might be the better solution. The question arises as to how a fleet of FCEV influences the operating cost, the greenhouse gas (GHG) emissions and primary energy demand in comparison to BEVs and to Internal Combustion Engine Vehicle (ICEV). To investigate this, we simulate the urban food retailing as a representative share of urban freight transport using a multi-agent transport simulation software. Synthetic routes as well as fleet size and composition are determined by solving a vehicle routing problem. We compute the operating costs using a total cost of ownership analysis and the use phase emissions as well as primary energy demand using the well to wheel approach. While a change to BEV results in 17–23% higher costs compared to ICEV, using FCEVs leads to 22–57% higher costs. Assuming today's electricity mix, we show a GHG emission reduction of 25% compared to the ICEV base case when using BEV. Current hydrogen production leads to a GHG reduction of 33% when using FCEV which however cannot be scaled to larger fleets. Using current electricity in electrolysis will increase GHG emission by 60% compared to the base case. Assuming 100% renewable electricity for charging and hydrogen production, the reduction from FCEVs rises to 73% and from BEV to 92%. The primary energy requirement for BEV is in all cases lower and for higher compared to the base case. We conclude that while FCEV have a slightly higher GHG savings potential with current hydrogen, BEV are the favored technology for urban freight transport from an economic and ecological point of view, considering the increasing shares of renewable energies in the grid mix. [ABSTRACT FROM AUTHOR]

Roads and parking areas represent a place of conflict between freight vehicles and other urban activities, especially on mixed residential and commercial streets. This conflict results in traffic congestion, illegal parking, pollution and road safety problems. The challenge is to allocate public space between the right operating activities, parking activities, public transport and so on. To address that, urban logistics delivery bays, also known as loading/unloading (L/U) zones, have become a real solution to facilitate the delivery and pick-up operations of urban freight vehicles, ensure accessibility for delivery drivers, reduce congestion and improve road safety. Therefore, this paper reports on planning and enforcement of urban delivery bays needs. It is part of the urban freight transport (UFT) surveys. This involves consolidating with new contribution the development, implementation and statistical analysis of a survey in order to quantify the need of delivery areas. Compared to the existing literature, this paper presents a mixed applied methodology which is divided into two parts : “Exploratory survey” and “Establishment-vehicle observation” survey. These two surveys techniques were conducted to offer an overview of the freight vehicle delivery and pick-up frequency according to the daytime and weekdays and the operations related to the loading/unloading activities. This makes it possible to estimate the delivery bays requirement in the study area. The findings from a methodological and practical angle are illustrated through a real case study in a commercial street in Morocco. The findings suggest that 60% of deliveries are made between 8:00 A.M and 12 A.M, and the movements generated by each establishment are 257 movements. For this, the study zone requires the development of three loading/unloading (L/U) bays. The main contribution is to propose an approach that urban authorities can use to estimate urban delivery areas efficiently and thus allow simple replication of the proposed framework in other cities.

The different stakeholders involved in urban freight transport, their behaviours, and interactions are attracting the attention of researchers and practitioners in logistics and freight transport, pushed by the need to develop methods and models for assessing ex ante actions/measures to improve the logistics process performance. Besides, the large amounts of data currently available open up new opportunities, as well as the possibility of using them to review past operations and provide suggestions and guidelines for future decision-making. In this context, to improve city sustainability and liveability, the cooperation and coordination among transport and logistics operators have been some of the measures for optimizing freight operations, with a subsequent reduction in vehicles and traffic impacts. Therefore, opportunities arise to point out the stakeholders' decentralised collaboration and the dynamic information driving urban logistics operations. In this context, this paper presents a microsimulation model framework to support the operational decision-making of an urban supply chain that makes the most of such cooperation and coordination and appropriately responds to the dynamic changes of demand and supply. The model was first tested using data collected in the urban area of Medellin, Colombia and we obtained satisfactory results that show the benefits of implementing such modelling framework to support decision making policies.

The lack of efficiency in the use of the on-street infrastructure dedicated to loading and unloading freight in the city, with their shortage and inefficient placement, generates congestion and delays during urban freight deliveries. An exploratory study is presented on the feasibility of incorporating technology into the management of dedicated loading/unloading areas for urban logistics in downtown Montevideo (Uruguay). After data of the neighborhood was collected, and the main stakeholder interest gathered, the paper analyzes a feasible technological solution to the problem, considering the restrictions posed by the stakeholders for sharing information. Due to the increasing influence of blockchain and its implementation for specific logistic problems, such as product traceability, the introduction of blockchain as part of the solution is considered and discussed in the system architecture

The warehouse location is a critical factor in the efficiency of urban freight transport. However, several factors influence this location. This paper analyses the spatial correlation of characteristics of cities in a metropolitan region and the location of the warehouses through a case study in the Belo Horizonte metropolitan region. The municipalities' socioeconomic and fleet data were analysed using the Local Moran Index and Bivariate Moran Index statistics. The results were presented by clusters using the Local Indicator of Spatial Association. Populational density, land cost, and truck fleet are spatially correlated with the warehouses' location. Furthermore, the characteristics of some municipalities, as Contagem, Ribeirão das Neves, and Ibirité, create high-high clusters, with high spatial correlation in the municipalities of cluster and, also, in the surroundings. Findings suggest the importance of land use, logistics, and real estate sector public policies minimise warehouses' externalities and contribute to economic development.

Crowd logistics is believed to be an innovative idea that can solve the dilemma lying in the scattered transportation resources and unstable demands of urban freight transport. However, the negative interactions among the participants have left crowd logistics an unstable development. In order to reveal the interactions, which occur under the bounded rationality and discover influencing factors to participants' strategy selections, this article develops the system evolutionary game model and system dynamics model. Also, it investigates how tripartite participants respond to the governance policies under static and dynamic scenario. The simulation results show that dynamic scenario has a better performance in restraining strategy fluctuations among the participants. Under the dynamic scenario, the strategy combination of participants eventually converges to the evolutionarily stable strategy. The probability that shippers adopt "price-exploitation" strategy is positively correlated with extra profits while negatively correlated with the upper bond of the penalties. The profits are the key factor affecting the willingness of drivers joining crowd logistics platform (CLP). [ABSTRACT FROM AUTHOR]