Search

Background and Aims: Collaboration has become a crucial element of effective healthcare delivery in the emergency department (ED). In high-pressure environments, healthcare providers can prioritize patients by consulting with other specialists to gain diverse perspectives and arrive at a shared understanding of the best course of action. It was conducted for the purpose of designing and evaluating the collaborative decision-making application for patient care in the ED., Methods: The present applied research study was conducted between April 1, 2021 and May 31, 2023 at Imam Reza Hospital of Tabriz University of Medical Sciences. The study was conducted in three phases: exploration, development, and evaluation, utilizing modern technologies such as Flutter and Node.js to design and program the application. The effectiveness of the system was evaluated using established measures, including the think-aloud protocol, user experience questionnaire, and Likert-scale questionnaires developed by Ghadri et al., Results: The average scale for attractiveness was 2.03, perspicuity was 2.90, efficiency was 2.40, dependability was 1.93, stimulation was 2.48, and novelty was 2.78. Additionally, 71% of physicians gave a very good rating to the accessibility of necessary information at any time, motivation to use the system for accessing information, usefulness of the system compared to the time spent using it throughout the day. Furthermore, 57% of physicians gave a very positive rating to sharing information and knowledge, ease of using the search function and accessing the system, user control and monitoring, free access to the system, and support from colleagues and system users., Conclusion: The study suggests that introducing Information and Communication Technology such as medical apps can improve healthcare delivery by streamlining patient care, promoting effective teamwork, and reducing medical errors and treatment delays., Competing Interests: The authors declare no conflict of interest., (© 2024 The Authors. Health Science Reports published by Wiley Periodicals LLC.)

A sensor for monitoring of the external corrosion of small-diameter aboveground oil and gas pipelines (called flowlines), based on fiber-optic strain sensing, is proposed. The working principle of our proposed sensor relies on the use of a pre-stressed sacrificial structure made of the same material as the pipeline and monitoring changes in the measured strain that occur due to deterioration caused by corrosion to the structure. We present the development of analytical equations that allow designing the sensor structure to achieve the desired strain values. The analysis was verified using commercial finite element analysis (FEA) software. The proposed sensor is simple and cost-effective and can be easily manufactured. It can be deployed on existing overground pipelines without any modification to the pipeline structure. While it is not capable of measuring the corrosion rate continuously, it can provide a measurement of the average corrosion rate over the life span of its sacrificial metal structure.

Bicyclists and pedestrians are two large vulnerable groups of road users. Many cities have allowed cyclists to share space with pedestrians on footpaths and off-road paths to reduce conflict with motor vehicles. The risk of bicyclist-pedestrian accidents is also increasing accordingly. Therefore, there is a need to understand the factors that affect the risk of injury in such accidents, especially to pedestrians who are considered more vulnerable. This paper presents a detailed investigation of bicyclist-pedestrian collisions and possible injury outcomes. The study has considered five levels of collision speed ranging from 10 km/h to 30 km/h, three pedestrian profiles (adult, child, and elderly) differentiated by their weight and height, three bicycles with different masses, and five impact directions. The bicyclist-pedestrian collision simulations have been analyzed based on four metrics: throw distance, peak head velocity on impact with the ground, head injury criterion (HIC) value, and the probability of severe head injury. For each simulation, the throw distance and peak head velocity on impact with the ground are extracted. Following that, the HIC and the probability of severe head injury to pedestrians are computed. The results show a significant effect of collision speed (p < 0.05) on all four metrics. The analysis has been further extended to study the effect of height and weight profile, bicycle mass, and impact directions on bicyclist-pedestrian collisions. According to the results, the impact directions largely influence the outcome of bicycle-pedestrian collisions. In general, direct impacts on pedestrian body center have been found to yield higher HIC values and probability of severe head injury to pedestrians than off-center impacts. Also, video analysis of simulated collisions has suggested that the accident mechanism depends on weight and height profiles (correlated with different age groups) and impact directions. Finally, recommendations have been proposed based on the study, including a speed limit of not more than 12 km/h for bicyclists on narrow shared paths and footpaths where risks of collisions with pedestrians are high. The results and analysis presented could be helpful for developing legislation to minimize conflicts between bicyclists and pedestrians on shared paths and to reduce potential injury to pedestrians., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

We propose a sensor design for measurement of large strains where direct application of a fiber optic strain gauge is impossible due to the stiffness mismatch between the optical fiber and the structure under test. The sensor design is based on a rhombus type compliant mechanism, which functions to attenuate input strain and transfer it to the ends of the sensing beam with the mounted optical strain gauge. We developed an analytical model of the sensor, which allows us to relate actuation forces, input displacement/strain, and output strain. The analytical model was verified with the finite element analysis and validated against an experimental prototype. The prototype sensor was able to handle input strains exceeding ±2.5 × 10 5 µε. Potential application areas of the proposed sensor include compliant elastomeric structures, wearables, and soft robotics.

Corrosion in the oil and gas industry represents one of the major problems that affect oil production and transportation processes. Several corrosion-inspection technologies are in the market to detect internal and external corrosion of oil storage tanks, but inspection of storage tanks occurs every 3 to 7 years. In between inspection interval, aggressive corrosion can potentially occur, which makes the oil and gas industry vulnerable to accidents. This study proposes a new internal corrosion detection sensor based on the magnetic interaction between a rare-earth permanent magnet and the ferromagnetic nature of steel, used to manufacture oil storage tanks. Finite element analysis (FEA) software was used to analyze the effect of various sensor parameters on the attractive force between the magnet and the steel. The corrosion detection sensor is designed based on the FEA results. The experimental testing of the sensor shows that it is capable of detecting internal metal loss due to corrosion in oil storage tanks within approximately 8 mm of the internal surface thickness. The sensor showed more than two-fold improvement in the detection range compared to previous sensor proposed by the authors. Furthermore, the sensor of this paper provides a monitoring rather than occasional inspection solution.

Oil flowlines, the first "pipeline" system connected to the wellhead, are pipelines that are 5 to 30.5 cm (two to twelve inches) in diameter, most susceptible to corrosion, and very difficult to inspect. Herein, an external corrosion detection sensor for oil and gas pipelines, consisting of a semicircular plastic strip, a flat dog-bone-shaped sacrificial metal plate made out of the same pipeline material, and an optical fiber with Fiber Bragg Grating (FBG) sensors, is described. In the actual application, multiple FBG optical fibers are attached to an oil and gas pipeline using straps or strips or very large hose clamps, and, every few meters, our proposed corrosion detection sensor will be glued to the FBG sensors. When the plastic parts are attached to the sacrificial metals, the plastic parts will be deformed and stressed; thus, placing the FBG sensors in tension. When corrosion is severe at any given pipeline location, the sacrificial metal at that location will corrode till failure and the tension strain is relieved at that FBG Sensor location, and therefore, a signal is detected at the interrogator. Herein, the external corrosion detection sensor and its design equations are described, and experimental results, verifying our theory, are presented., Competing Interests: The authors declare no conflicts of interest. The funding sponsors had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript; and in the decision to publish the results.

A monitoring solution was developed for detection of material loss in metals such as carbon steel using the force generated by permanent magnets in addition to the optical strain sensing technology. The working principle of the sensing system is related to the change in thickness of a steel plate, which typically occurs due to corrosion. As thickness decreases, the magnetostatic force between the magnet and the steel structure also decreases. This, in turn, affects the strain measured using the optical fiber. The sensor prototype was designed and built after verifying its sensitivity using a numerical model. The prototype was tested on steel plates of different thicknesses to establish the relationship between the metal thickness and measured strain. The results of experiments and numerical models demonstrate a strong relationship between the metal thickness and the measured strain values., Competing Interests: The authors declare no conflict of interest. The funding sponsors had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, and in the decision to publish the results.

Pipelines are the main transportation means for oil and gas products across large distances. Due to the severe conditions they operate in, they are regularly inspected using conventional Pipeline Inspection Gages (PIGs) for corrosion damage. The motivation for researching a real-time distributed monitoring solution arose to mitigate costs and provide a proactive indication of potential failures. Fiber optic sensors with polymer claddings provide a means of detecting contact with hydrocarbons. By coating the fibers with a layer of metal similar in composition to that of the parent pipeline, corrosion of this coating may be detected when the polymer cladding underneath is exposed to the surrounding hydrocarbons contained within the pipeline. A Refractive Index (RI) change occurs in the polymer cladding causing a loss in intensity of a traveling light pulse due to a reduction in the fiber's modal capacity. Intensity losses may be detected using Optical Time Domain Reflectometry (OTDR) while pinpointing the spatial location of the contact via time delay calculations of the back-scattered pulses. This work presents a theoretical model for the above sensing solution to provide a design tool for the fiber optic cable in the context of hydrocarbon sensing following corrosion of an external metal coating. Results are verified against the experimental data published in the literature., Competing Interests: The authors declare no conflict of interest.

External corrosion was identified as one of the main causes of pipeline failures worldwide. A solution that addresses the issue of detecting and quantifying corrosivity of environment for application to existing exposed pipelines has been developed. It consists of a sensing array made of an assembly of thin strips of pipeline steel and a circuit that provides a visual sensor reading to the operator. The proposed sensor is passive and does not require a constant power supply. Circuit design was validated through simulations and lab experiments. Accelerated corrosion experiment was conducted to confirm the feasibility of the proposed corrosivity sensor design., Competing Interests: The authors declare no conflict of interest.

The harsh and stressful growing environment of extensive green roofs especially in arid environments allows a limited range of plant species to survive. Therefore, achieving plantings to survive in such conditions is a significant challenge. This paper describes an experiment investigating plant selections for extensive green roofs based on chilling (cold season) and drought (warm season) conditions of Iran. Nine species were selected from the three major taxonomic and functional plant groups that are commonly used on extensive green roofs including grasses, groundcovers and sedums. The species namely Agropyron cristatum, Festuca aurundinacea, Festuca ovina, Potentila sp., Frankinia thymifolia, Vinca minor, Sedum acre, Sedum spurinum, Carpobrotus edulis were imposed to natural chilling in autumn and winter using a randomized complete block design. For spring and summer, irrigation regimes at levels (48, 72 and 96 h intervals) in a factorial experiment based on a randomized complete block design with four replications were applied. The results showed that Agropyron cristatum, Frankinia thymifolia and Carpobrotus edulis were the best plants from each class. Carpobrotus edulis was the best choice for cold and warm seasons and this was followed by Frankinia thymifolia and Potentila sp. Vinca minor performed well in the cold seasons and Sedum spurinum appeared to be excellent in the warm seasons. The plants of the experiment showed significantly different appearances in different watering regimes. Little differences in drought tolerances were observed among the forbs and grasses, which must be watered during warm seasons. However, the succulents responded very well to the drought and low watering regimes. Overall, succulents and groundcovers were considered more appropriate for application in warm and cold seasons, respectively. According to the findings, drought and cold weather conditions cannot be a major obstacle for developing extensive green roofs in Iran if considerations are made on selecting its plant species., (Copyright © 2017 Elsevier Ltd. All rights reserved.)