Search

The incidence of "acid attacks" (vitreolage) is a global concern, with those affected often receiving lifelong medical care due to physical and psychological damage. The purpose of this study was to evaluate the effectiveness of several emergency skin decontamination approaches against concentrated (>99 %) sulphuric acid and to identify the effective window of opportunity for decontamination. The effects of four decontamination methods (dry, wet, combined dry & wet and cotton cloth) were assessed using an in vitro diffusion cell system containing dermatomed porcine skin. Sulphuric acid (H 2 SO 4 ) was applied to the skin with decontamination protocols performed at 10 s, 30 s, 8 min, and 30 min post exposure. Skin damage was quantified by tritiated water ( 3 H 2 O) penetration, receptor fluid pH and photometric stereo imaging (PSI), with quantification of residual sulphur (by SEM-EDS) to determine overall decontamination efficiency. Skin translucency (quantified by PSI) demonstrated a time-dependent loss of dermal tissue integrity from 10 s. Quantification of dermal sulphur content confirmed the rapid (exponential) decrease in decontamination efficiency with time. The pH of the water effluent indicated complete neutralisation of acid from the skin surface after 90 s of irrigation. Wet decontamination (either alone or immediately following dry decontamination) was the most effective intervention evaluated, although no decontamination technique was statistically effective after 30 s exposure to the acid. These data demonstrate the time-critical consequences of dermal exposure to concentrated sulphuric acid: we find no practical window of opportunity for acid decontamination, as physical damage is virtually instantaneous., Competing Interests: Declaration of Competing Interest The authors declare no conflicts of interest., (Copyright © 2024. Published by Elsevier Ltd.)

Breast cancer is one of the most frequently diagnosed cancers in women and the major cause of worldwide cancer-related deaths among women. Various treatment strategies including conventional chemotherapy, immunotherapy, gene therapy, gene silencing and deliberately engineered nanomaterials for receptor mediated targeted delivery of anticancer drugs, antibodies, and small-molecule inhibitors, etc are being investigated by scientists to combat breast cancer. Smartly designed/fabricated nanomaterials are being explored to target breast cancer through enhanced permeation and retention effect; and also, being conjugated with suitable ligand for receptor-mediated endocytosis to target breast cancer for diagnostic, and theranostic applications. These receptor-targeted nanomedicines have shown efficacy to target specific tumor tissue/cells abstaining the healthy tissues/cells from cytotoxic effect of anticancer drug molecules. In the last few decades, theranostic nanomedicines have gained much attention among other nanoparticle systems due to their unique ability to deliver chemotherapeutic as well as diagnostic agents, simultaneously. Theranostic nanomaterials are emerging as novel paradigm with ability for concurrent delivery of imaging (with contrasting agents), targeting (with biomarkers), and anticancer therapeutics with one delivery system (as cancer theranostics) and can transpire as promising strategy to overcome various hurdles for effective management of breast cancer including its most aggressive form, triple-negative breast cancer.

Cancer is one of the major leading causes of mortality in the world. The implication of nanotherapeutics in cancer has garnered splendid attention owing to their capability to efficiently address various difficulties associated with conventional drug delivery systems such as non-specific biodistribution, poor efficacy, and the possibility of occurrence of multi-drug resistance. Amongst a plethora of nanocarriers for drugs, this review emphasized lipidic nanocarrier systems for delivering anticancer therapeutics because of their biocompatibility, safety, high drug loading and capability to simultaneously carrying imaging agent and ligands as well. Furthermore, to date, the lack of interaction between diagnosis and treatment has hampered the efforts of the nanotherapeutic approach alone to deal with cancer effectively. Therefore, a novel paradigm with concomitant imaging (with contrasting agents), targeting (with biomarkers), and anticancer agent being delivered in one lipidic nanocarrier system (as cancer theranostics) seems to be very promising in overcoming various hurdles in effective cancer treatment. The major obstacles that are supposed to be addressed by employing lipidic theranostic nanomedicine include nanomedicine reach to tumor cells, drug internalization in cancer cells for therapeutic intervention, off-site drug distribution, and uptake via the host immune system. A comprehensive account of recent research updates in the field of lipidic nanocarrier loaded with therapeutic and diagnostic agents is covered in the present article. Nevertheless, there are notable hurdles in the clinical translation of the lipidic theranostic nanomedicines, which are also highlighted in the present review along with plausible countermeasures.

The buccal mucosa appears as a promissory route for biologic drug administration, and pharmaceutical films are flexible dosage forms that can be used in the buccal mucosa as drug delivery systems for either a local or systemic effect. Recently, thin films have been used as printing substrates to manufacture these dosage forms by inkjet printing. As such, it is necessary to investigate the effects of printing biologics on films as substrates in terms of their physical and mucoadhesive properties. Here, we explored solvent casting as a conventional method with two biocompatible polymers, hydroxypropyl methylcellulose, and chitosan, and we used electrospinning process as an electrospun film fabrication of polycaprolactone fibers due to its potential to elicit mucoadhesion. Lysozyme was used as biologic drug model and was formulated as a solution for printing by thermal inkjet printing. Films were characterized before and after printing by mechanical and mucoadhesive properties, surface, and ultrastructure morphology through scanning electron microscopy and solid state properties by thermal analysis. Although minor differences were detected in micrographs and thermograms in all polymeric films tested, neither mechanical nor mucoadhesive properties were affected by these differences. Thus, biologic drug printing on films was successful without affecting their mechanical or mucoadhesive properties. These results open way to explore biologics loading on buccal films by inkjet printing, and future efforts will include further in vitro and in vivo evaluations.

Hypothyroidism is a chronic and debilitating disease that is estimated to affect 3% of the general population. Clinical experience has highlighted the synergistic value of combining triiodothyronine (T 3 ) and thyroxine (T 4 ) for persistent or recurrent symptoms. However, thus far a platform that enables the simultaneous and independent dosing of more than one drug for oral administration has not been developed. Thermal inkjet (TIJ) 2D printing is a potential solution to enable the dual deposition of T 3 and T 4 onto orodispersible films (ODFs) for therapy personalisation. In this study, a two-cartridge TIJ printer was modified such that it could print separate solutions of T 3 and T 4 . Dose adjustments were achieved by printing solutions adjacent to each other, enabling therapeutic T 3 (15-50 μg) and T 4 dosages (60-180 μg) to be successfully printed. Excellent linearity was observed between the theoretical and measured dose for both T 3 and T 4 (R 2  = 0.982 and 0.985, respectively) by changing the length of the print objective (Y-value). Rapid disintegration of the ODFs was achieved (<45 s). As such, this study for the first time demonstrates the ability to produce personalised dose combinations by TIJ printing T 3 and T 4 onto the same substrate for oral administration., (Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.)

Warfarin is a widely used anticoagulant that is critical in reducing patient morbidity and mortality associated with thromboembolic disorders. However, its narrow therapeutic index and large inter-individual variability can lead to complex dosage regimes. Formulating warfarin as an orodispersible film (ODF) using thermal ink-jet (TIJ) printing could enable personalisation of therapy to simplify administration. Commercial TIJ printers are currently unsuitable for printing the milligram dosages, typically required for warfarin therapy. As such, this study aimed to modify a commercial TIJ printing system to formulate personalised warfarin ODFs containing therapeutic dosages. A TIJ printer was modified successfully with the printer functionality intact; the substrate (paper) rolling mechanism of the printer was replaced by printing onto a stationary stage. Free film substrates were composed of hydroxypropyl methylcellulose (20%w/w) and glycerol (3%w/w). The resulting ODFs were characterised for morphology, disintegration, solid-state properties and drug content. Printed film stability was assessed at 40 °C/75% relative humidity for 30 days. Therapeutic warfarin doses (1.25 and 2.5 mg) were successfully printed onto the film substrates. Excellent linearity was observed between the theoretical and measured dose by changing the warfarin feed concentration (R 2  = 0.9999) and length of the print objective, i.e. the Y-value, (R 2  = 0.9998). Rapid disintegration of the ODFs was achieved. As such, this study successfully formulated personalised warfarin ODFs using a modified TIJ printer, widening the range of applications for TIJ printing to formulate narrow therapeutic index drugs., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The process of drying thin polymer films is an important operation that influences the film structure and solid state, and the stability of the product. The purpose of this work was to study and model the drying kinetics of multicomponent films based on two polymers: hydroxypropyl methylcellulose (HPMC, amorphous) and polyvinyl alcohol (PVA, semicrystalline). The isothermal drying kinetics of the films at different temperatures (40, 60, and 80°C) were studied using thermo-gravimetric analysis (TGA) and convection oven methods. Solid-state characterization tools used in the study included polarization and hot-stage microscopy, scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). The drying kinetics of HPMC and PVA films in the TGA apparatus and convection oven were comparable. The three-parameter (W max , τ, n) Hill equation successfully modeled the experimental drying kinetics. The time factor τ in the Hill equation nicely explained two drying phases in the films. Solid-state phase changes occurring in the films during dehydration had a bearing on the drying kinetics and mechanisms. TGA can be used as a simple tool to determine the end points in drying processes using ovens or tunnels. The three-parameter Hill equation explained the drying kinetics and diffusion mechanisms of the solvent through the polymer films for the first time. This study advances our understanding of film drying, in particular for pharmaceutically relevant thin films.

The aim of the present work was to prepare tadalafil (TDF) nanocrystals-loaded oral polymeric films (OFs) and investigate the effect of hydrophilic surfactants and drug loads on the physico-mechanical and dissolution properties. The nanosuspensions of TDF were prepared by high shear homogenization. HPMC based placebo casting film gel was prepared and mixed with TDF nanosuspensions. Films were casted using an automated film applicator and dried at 60°C for 45min. Particle size (PS), polydispersity index (PDI), and zeta potential (ZP) of TDF nanosuspensions were measured in a Zetasizer. The films were characterized using SEM, AFM, DSC, TGA and PXRD. The mechanical properties and in vitro drug release were determined using standard methods. TDF existed in crystalline form and the particles remained in the nano-range in redispersed films. TDF nanocrystals were embedded in the polymeric matrix and the drug loaded films were rough on the surface. Mechanical properties of the films varied with changes in drug load and surfactant. Significant changes in the disintegration times were noticed in films containing surfactants compared to surfactant-free films. About 80% of the drug release was observed between 3 and 30min. TPGS showed better TDF release from the films at different drug loads., Chemical Compounds: Hydroxy propyl methyl cellulose (PubChem CID: 57503849); Glycerol (PubChem CID: 753); Pluronic F-68 (PubChem CID: 24751); Vitamin E TPGS (PubChem CID: 71406)., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The effect of different plasticizers (glycerol, vitamin E TPGS and triacetin) and their concentrations on the physico-mechanical properties of pullulan based oral films was studied. A full factorial (3 2 ) design of experiments was used. Elastic modulus, tensile strength, elongation at break and disintegration time were selected as response variables. Modulated differential scanning calorimeter (MDSC) was used for determining glass transition temperature (T g ) of pullulan films. The surface morphology of films was evaluated by SEM, while ATR-FTIR was used to obtain a molecular level understanding of polymer-plasticizer interactions. The DoE analysis allowed for the modelling of tensile strength and elongation at break. The highest elongations were observed in glycerol at 20% w/w. Majority of the films disintegrated within one minute without significant differences. ATR-FTIR spectra of pullulan alone and different plasticizer blend films show characteristic molecular interactions. The present study concluded that glycerol is suitable plasticizer compared to others for manufacturing pullulan based oral films., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The intention of this study is to achieve higher entrapment efficiency (EE) of berberine chloride (selected hydrophilic drug) using nanoprecipitation technique. The solubility of drug was studied in various pH buffers (1.2-7.2) for selection of aqueous phase and stabilizer. Quality by design (QbD)-based 3(2) factorial design were employed for optimization of formulation variables; drug to polymer ratio (X1) and surfactant concentration (X2) on entrapment efficiency (EE), particle size (PS) and polydispersity index (PDI) of the nanoparticles. The nanoparticles were subjected to solid state analysis, in vitro drug release and stability study. The aqueous phase and stabilizer selected for the formulations were pH 4.5 phthalate buffer and surfactant F-68, respectively. The formulation (F-6) containing drug to polymer ratio (1:3) and stabilizer (F-68) concentration of 50 mM exhibited best EE (82.12%), PS (196.71 nm), PDI (0.153). The various solid state characterizations assured that entrapped drug is amorphous and nanoparticles are fairly spherical in shape. In vitro drug release of the F-6 exhibited sustained release with non-Fickian diffusion and stable at storage condition. This work illustrates that the proper selection of aqueous phase and optimization of formulation variables could be helpful in improving the EE of hydrophilic drugs by nanoprecipitation technique.