Search

Power-to-methane technology is a promising solution to facilitate the use of excess variable renewable energy for biomethane production. In this approach, hydrogen produced via electrolysis is used to upgrade raw biogas, which can be subsequently used as fuel or stored in the gas grid. Ex-situ biomethanation is an emerging technology that could potentially replace conventional energy-intensive biogas upgrading methods and allow CO2 utilization for biomethane production. This work provides a comprehensive overview on the current status of ex-situ biomethanation with particular attention to trickle bed reactor. The review includes description of ex-situ biomethanation and summarizes previous works on this topic. The key elements related to operational conditions, efficiency, and microbiology of ex-situ biomethanation using trickle bed reactor are described here. Additionally, the review highlights the technical and economic issues that have to be addressed for future development and large-scale implementation of ex-situ biomethanation. [ABSTRACT FROM AUTHOR]

Wheat straw and animal wastes are important feedstock for biogas production in Europe. Yet, the high content of lignocellulosic and refractory materials causes the process to be relatively slow. Therefore, pretreatment methods have been proposed to shorten the hydrolysis phase. The present study examined the effectiveness of alkali pre-treatment (AP), ultrasonic pre-treatment (UP), and alkali-ultrasonic pre-treatment (AUP) applied on wheat straw (WS), solid fraction of cattle manure (SCM) and solid fraction of slaughterhouse waste (SSHW), by monitoring solubilisation ratio, anaerobic biodegradability and methane yield. The results indicate that the solubilisation ratio of the substrates improved regardless of the types of pre-treatment applied. Though, AP was more effective on WS and SSHW than other pre-treatments (UP and AUP), with approximately 47% and 17% extra methane, respectively. Moreover, AP of SCM caused an increased in methane production rate by 100% and minimised lag phase from 16 days to 1 day during anaerobic digestion. Based on Danish conditions, only AP of WS was economical prior to the biogas process due to high extra methane yield. A positive energy budget of 8 € t−1VS was calculated. High-energy consumption during UP and AUP in laboratory scale hindered the positive benefits of these pre-treatments. [ABSTRACT FROM AUTHOR]

Background: Commercial biogas upgrading facilities are expensive and consume energy. Biological biogas upgrading may serve as a low-cost approach because it can be easily integrated with existing facilities at biogas plants. The microbial communities found in anaerobic digesters typically contain hydrogenotrophic methanogens, which can use hydrogen (H2) as a reducing agent for conversion of carbon dioxide (CO2) into methane (CH4). Thus, biological biogas upgrading through the exogenous addition of H2 into biogas digesters for the conversion of CO2 into CH4 can increase CH4 yield and lower CO2 emission. Results: The addition of 4 mol of H2 per mol of CO2 was optimal for batch biogas reactors and increased the CH4 content of the biogas from 67 to 94%. The CO2 content of the biogas was reduced from 33 to 3% and the average residual H2 content was 3%. At molar H2:CO2 ratios > 4:1, all CO2 was converted into CH4, but the pH increased above 8 due to depletion of CO2, which negatively influenced the process stability. Additionally, high residual H2 content in these reactors was unfavourable, causing volatile fatty acid accumulation and reduced CH4 yields. The reactor microbial communities shifted in composition over time, which corresponded to changes in the reactor variables. Numerous taxa responded to the H2 inputs, and in particular the hydrogenotrophic methanogen Methanobacterium increased in abundance with addition of H2. In addition, the apparent rapid response of hydrogenotrophic methanogens to intermittent H2 feeding indicates the suitability of biological methanation for variable H2 inputs, aligning well with fluctuations in renewable electricity production that may be used to produce H2. Conclusions: Our research demonstrates that the H2:CO2 ratio has a significant effect on reactor performance during in situ biological methanation. Consequently, the H2:CO2 molar ratio should be kept at 4:1 to avoid process instability. A shift toward hydrogenotrophic methanogenesis was indicated by an increase in the abundance of the obligate hydrogenotrophic methanogen Methanobacterium. [ABSTRACT FROM AUTHOR]

Anaerobic co-digestion of poultry droppings (PD) and briquetted wheat straw (BWS) with alkali additive in the form of KOH (BWS add ) or without any additive (BWS raw ) was conducted using continuously stirred tank reactors (CSTRs) under both mesophilic (35 °C) and thermophilic (53 °C) conditions. The aims of the study were to compare 1) co-digestion of PD and BWS versus mono-digestion of PD; 2) co-digestion of PD and BWS with or without additives; and 3) mesophilic and thermophilic anaerobic digestion (AD). Co-digestion of PD and BWS was superior to mono-digestion of PD in terms of gas production. Co-digestion of PD with BWS add at thermophilic temperatures resulted in a higher methane volumetric yield per kg substrate compared to mesophilic conditions. With and without additive, co-digestion with BWS produced 8% and 11% higher yields at thermophilic conditions than at mesophilic conditions. Co-digestion of PD with BWS add resulted in, respectively, 14% and 27% more methane produced at mesophilic and thermophilic conditions over mono-digestion of PD. When mono-digesting PD, the mesophilic temperature was superior to the thermophilic since methane yield was higher in the mesophilic temperature regime. [ABSTRACT FROM AUTHOR]