Search

Background: Maximal lower-body strength can be assessed both dynamically and isometrically; however, the relationship between the changes in these 2 forms of strength following resistance training is not well understood. Purpose: To systematically review and analyze the effects of resistance training on changes in maximal dynamic (1-repetition-maximum back squat, deadlift, and power clean) and position-matched isometric strength (isometric midthigh pull and the isometric squat). In addition, individual-level data were used to quantify the agreement and relationship between changes in dynamic and isometric strength. Methods: Databases were systematically searched to identify eligible articles, and meta-analysis procedures were performed on the extracted data. The raw results from 4 studies were acquired, enabling bias and absolute reliability measures to be calculated using Bland–Altman test of agreement. Results: Eleven studies met the inclusion criteria, which resulted in 29 isometric–dynamic change comparisons. The overall pooled effect was 0.13 in favor of dynamic testing; however, the prediction interval ranged from g = −0.49 to 0.75. There was no evidence of bias (P =.825) between isometric and dynamic tests; however, the reliability coefficient was estimated to be 16%, and the coefficient of variation (%) was 109.27. Conclusions: As a range of future effects can be expected when comparing isometric to dynamic strength changes following resistance training, and limited proportionality exists between changes in these 2 strength qualities, there is strong evidence that isometric and dynamic strength represent separate neuromuscular domains. These findings can be used to inform strength-assessment models in athlete populations. [ABSTRACT FROM AUTHOR]

We examined performance across one menstrual cycle (MC) and 3 weeks of hormonal contraceptives (HC) use to identify whether known fluctuations in estrogen and progesterone/progestin are associated with functional performance changes. National Rugby League Indigenous Women's Academy athletes [n = 11 naturally menstruating (NM), n = 13 using HC] completed performance tests [countermovement jump (CMJ), squat jump (SJ), isometric mid‐thigh pull, 20 m sprint, power pass and Stroop test] during three phases of a MC or three weeks of HC usage, confirmed through ovulation tests alongside serum estrogen and progesterone concentrations. MC phase or HC use did not influence jump height, peak force, sprint time, distance thrown or Stroop effect. However, there were small variations in kinetic and kinematic CMJ/SJ outputs. NM athletes produced greater mean concentric power in MC phase four than one [+0.41 W·kg−1 (+16.8%), p = 0.021] during the CMJ, alongside greater impulse at 50 ms at phase one than four [+1.7 N·s (+4.7%), p = 0.031] during the SJ, without differences between tests for HC users. Among NM athletes, estradiol negatively correlated with mean velocity and power (r = −0.44 to −0.50, p < 0.047), progesterone positively correlated with contraction time (r = 0.45, p = 0.045), and both negatively correlated with the rate of force development and impulse (r = −0.45 to −0.64, p < 0.043) during the SJ. During the CMJ, estradiol positively correlated to 200 ms impulse (r = 0.45, p = 0.049) and progesterone to mean power (r = 0.51, p = 0.021). Evidence of changes in testing performance across a MC, or during active HC use, is insufficient to justify “phase‐based testing”; however, kinetic or kinematic outputs may be altered in NM athletes. [ABSTRACT FROM AUTHOR]

The aim of this study was to assess whether lifting velocity (MV) can provide accurate estimations of the maximum number of repetitions that can be performed to failure (RTF) during the parallel back‐squat exercise performed in a Smith machine. Thirty male wrestlers from the Turkey Olympic preparation center (age = 22.6 ± 2.2 years) completed four testing sessions: a session to determine the back‐squat one‐repetition maximum [1RM], two sessions consisting of single sets to failure against three loads (90%‐80%‐70%1RM), and one session consisting of four sets to failure against the 75%1RM. The goodness‐of‐fit of the generalized RTF‐MV relationship was strong (r2 = 0.838), but the individualized RTF‐MV relationships were stronger (r2 = 0.957 ± 0.058). Only 3 out of 60 individualized RTF‐MV relationships revealed a r2 lower than the r2 of the generalized RTF‐MV relationship (r2 = 0.685, 0.779 and 0.810). The reliability of the fastest MV associated with each RTF ranged from acceptable (4 out of 15 RTFs) to high (11 out of 15 RTFs). The raw and absolute errors in the prediction of RTF did not increase under fatigue and were comparable for both generalized (raw errors: −1.0–0.3 repetitions; absolute errors: 1.1–1.7 repetitions) and individualized (raw errors: −0.8 to 0.1 repetitions; absolute errors: 1.2–1.8 repetitions) RTF‐MV relationships. These results indicate that RTF can be predicted with acceptable precision from MV recordings in resistance‐trained skilled wrestlers during the parallel back‐squat exercise performed in a Smith machine. Highlights: The maximum number of repetitions completed to failure (RTF) can be predicted with acceptable precision from mean velocity (MV) recordings in resistance‐trained skilled wrestlers during the parallel back‐squat exercise performed in a Smith machine.The raw and absolute errors in the prediction of RTF is not influenced by the fatigue levels experienced at the beginning of the set.For more accurate RTF‐MV relationships, familiarity with lifting at maximal intended velocity and performing sets to failure seems beneficial. [ABSTRACT FROM AUTHOR]

Context: To understand overtraining syndrome (OTS), it is important to detail the physiological and psychological changes that occur in athletes. Objectives: To systematically establish and detail the physiological and psychological changes that occur as a result of OTS in athletes. Methods: Databases were searched for studies that were (1) original investigations; (2) English, full-text articles; (3) published in peer-reviewed journals; (4) investigations into adult humans and provided (5) objective evidence that detailed changes in performance from prior to the onset of OTS diagnosis and that performance was suppressed for more than 4 weeks and (6) objective evidence of psychological symptoms. Results: Zero studies provided objective evidence of detailed changes in performance from prior to the onset of OTS diagnosis and demonstrated suppressed performance for more than 4 weeks accompanied by changes in psychological symptoms. Conclusions: All studies failed to provide evidence of changes in performance and mood from "healthy" to an overtrained state with evidence of prolonged suppression of performance. While OTS may be observed in the field, little data is available describing how physiological and psychological symptoms manifest. This stems from vague terminology, difficulties in monitoring for prolonged periods of time, and the need for prospective testing. Real-world settings may facilitate the collection of such data, but the ideal testing battery that can easily be conducted on a regular basis does not yet exist. Consequently, it must be concluded that an evidence base of sufficient scientific quality for understanding OTS in athletes is lacking. [ABSTRACT FROM AUTHOR]

This study examined the influence of inter-set rest periods of 1 (R1), 3 (R3) and 5 (R5) minutes on the number of repetitions completed before exceeding the minimum velocity thresholds of 0.45 m⋅s−1 (MVT0.45) and 0.35 m⋅s−1 (MVT0.35) during the bench press exercise. Twenty-three physically active individuals, 15 men and eight women, randomly completed six testing sessions consisting of four sets of the bench press exercise performed with maximal intent against 75% of the one-repetition maximum. Testing sessions differed in the length of inter-set rest periods (R1, R3, and R5) and MVT applied (MVT0.45 and MVT0.35). The number of repetitions was lower using shorter inter-set rest periods (R1 < R3 < R5), but R3 was more similar to R1 and R5 using MVT0.45 and MVT0.35, respectively. The fastest velocity of the set was reduced with the increment in the number of sets for the three protocols using MVT0.35 (greater reduction for shorter rest periods), but it was only reduced for R1 when using MVT0.45. The results suggest that, to maintain bench press mechanical performance, 5-min inter-set rest periods are necessary when sets are terminated close to failure (MVT0.35), while 3 min may suffice when sets are terminated farther from failure (MVT0.45). [ABSTRACT FROM AUTHOR]

Edwards, T, Weakley, J, Banyard, HG, Cripps, A, Piggott, B, Haff, GG, and Joyce, C. Longitudinal development of sprint performance and force-velocity-power characteristics: influence of biological maturation. J Strength Cond Res 37(11): 2178-2184, 2023--This study was designed to investigate the influence of biological maturation on the longitudinal development of sprint performance. Thirty-two subjects performed 2 assessments of maximal sprint performance that were separated by 18 months. Each sprint assessment was measured through a radar gun that collected instantaneous velocity with the velocity-time data used to derive sprint times and force-velocity-power characteristics. The biological maturity of each subject was assessed using a predictive equation, and subjects were grouped according to predicted years from peak height velocity (circa-PHV: 21.0 to 1.0; post-PHV: .1.0). A 2 3 2 mixed model analysis of variance was used to assess group 3 time interactions, and paired t-tests were used to assess the longitudinal changes for each maturity group. No significant group 3 time interactions were observed for any sprint time or force-velocity-power characteristic. The circa-PHV group experienced significant within-group changes in maximal theoretical velocity (6.35 vs. 5.47%; effect size [ES] 5 1.26 vs. 0.52) and 5-m sprint time (23.63% vs. 22.94%; ES520.64 vs. 20.52) compared with the post-PHV group. There was no significant change in the magnitude of relative theoretical maximum force in either group; however, both the circa-PHV and post-PHV groups significantly improved the orientation of force production at the start of the sprint (RFmax [4.91 vs. 4.46%; ES 5 0.79 vs. 0.74, respectively]). Considering these findings, it is recommended that practitioners adopt training methods aimed to improve relative lower-limb force production, such as traditional strength training and sled pulling and pushing, to improve sprint performance and relative theoretical maximum force. [ABSTRACT FROM AUTHOR]

Purpose: To compare the accuracy of nine 1-repetition maximum (1RM) prediction methods during the paused and touch-and-go bench press exercises performed in a Smith machine. Method: A total of 86 men performed 2 identical sessions (incremental loading test until reaching the 1RM followed by a set to failure) in a randomized order during the paused and touch-and-go bench press exercises. Individualized load–velocity relationships were modeled by linear and polynomial regression models considering 4 loads (45%–60%–75%–90% of 1RM) (multiple-point methods) and considering only 2 loads (45%–90% of 1RM) by a linear regression (2-point method). Three minimal velocity thresholds were used: the general velocity of 0.17 m·s−1 (general velocity of the 1RM [V1RM]), the velocity obtained when lifting the 1RM load (individual V1RM), and the velocity obtained during the last repetition of a set to failure. Results: The 1RM prediction methods were generally valid (range: r =.96–.99, standard error of the estimate = 2.8–4.9 kg or 4.6%–8.0% of 1RM). The multiple-point linear method (2.79 [2.29] kg) was more precise than the multiple-point polynomial method (3.54 [3.31] kg; P =.013), but no significant differences were observed when compared with the 2-point method (3.09 [2.66] kg, P =.136). The velocity of the last repetition of a set to failure (3.47 [2.97] kg) was significantly less precise than the individual V1RM (2.91 [2.75] kg, P =.009) and general V1RM (3.00 [2.65] kg, P =.010). Conclusions: Linear regression models and a general minimal velocity threshold of 0.17 m·s−1 should be recommended to obtain a quick and precise estimation of the 1RM during the bench press exercise performed in a Smith machine. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the effects of traditional, rest redistribution, and velocity-based repeated sprint training methods on repeated sprint performance, perceived effort, heart rate, and changes in force-velocity-power (FVP) profiles in male semiprofessional athletes. In a randomized crossover design, a traditional (2 sets of 6 repetitions [TRAD]), 2 different rest redistribution (4 sets of 3 repetitions [RR4] and 12 sets of 1 repetition [RR12]), and a 5% velocity loss (VL5%) (12 repetitions, with sets terminated when a 5% reduction in mean velocity had occurred) condition were completed. Mean and peak velocity, mean heart rate, and differential ratings of perceived exertion (dRPE) were measured throughout each session, while horizontal FVP profiles were assessed presession and postsession. The RR4 and RR12 conditions allowed the greatest maintenance of velocity, while the RR4, RR12, and VL5% had a moderate, significantly greater mean heart rate than the traditional condition. Trivial, nonsignificant differences between all conditions were observed in dRPE of the legs and breathlessness and FVP profiles. These findings indicate that rest redistribution can allow for greater maintenance of sprint velocity and heart rate, without altering perceived effort during repeated sprint training. In addition, velocity-loss thresholds may be a feasible method of prescription if athletes have diverse physical qualities and reductions in sprint performance during repeated sprint training are undesirable. Practitioners should consider these outcomes when designing repeated sprint training sessions because the strategic use of these methods can alter sprint performance and internal load without changing perceptions of intensity. [ABSTRACT FROM AUTHOR]