Search

Domestic heating systems across northern Europe are responsible for a substantial fraction of their countries' carbon footprints. In the UK, the vast majority of home space heating is via natural gas boilers with 'wet' hydronic radiator systems. Most of those use TRVs (thermostatic radiator valves) for micro-zoning, to avoid overheating, improve comfort and save energy. To meet Net Zero targets, 20 million such UK gas systems may be retrofitted with heat pumps. Heat pump system designers and installers are cautious about retaining TRVs in such systems in part because of worries that TRV temperature setbacks that lower heat demand may raise heat pump electricity demand in a "bad setback effect", thus wasting energy. This paper presents a new view of heat pump control and provides the first exploration of this issue through the development of a simple physics-based model. The model tests an installation industry claim about the negative effect of TRVs, and finds that though real it should not apply to typical UK retrofits with weather compensation. The energy efficiency benefits of TRVs for older and partly occupied homes, and to keep bedrooms cooler, remain valid. Comfort-seeking householders and installers should know that setting 'stiff' temperature regulation may invoke the bad setback effect and cost dearly in energy and carbon footprint. [ABSTRACT FROM AUTHOR]

With a limited global carbon budget, it is imperative that decarbonisation decisions are based on accurate, holistic accounts of all greenhouse gas (GHG) emissions produced to assess their validity. Here the upstream GHG emissions of potential UK offshore Green and Blue hydrogen production are compared to GHG emissions from hydrogen produced through electrolysis using UK national grid electricity and the ‘business-as-usual’ case of continuing to combust methane. Based on an operational life of 25 years and producing 0.5MtH2 per year for each hydrogen process, the results show that Blue hydrogen will emit between 200-262MtCO2e of GHG emissions depending on the carbon capture rates achieved (39%–90%), Green hydrogen produced, via electrolysis using 100% renewable electricity from offshore wind will emit 20MtCO2e, and hydrogen produced via electrolysis powered by the National Grid will emit between 103-168MtCO2e, depending of the success of its NetZero strategy. The ‘business-as-usual’ case of continuing to combust methane releases 250MtCO2e over the same lifetime. This study finds that Blue hydrogen at scale is not compatible with the Paris Agreement, reduces energy security and will require a substantial GHG emissions investment which excludes it from being a ‘low carbon technology’ and should not be considered for any decarbonisation strategies going forward.

Copyright of Die Radiologie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The energy renovation of buildings is one of the main keys to achieve the decarbonisation objectives of the European Union (EU). In response, the Commission Recommendation (EU) 2019/786 proposed an assessment framework based on Measurable Progress Indicators (MPIs) to assess the decarbonisation. The objective of the study is to analyse the applicability of the MPIs in Spain; for this, the study analyses the viability of the MPIs and carries on the prioritization of the MPIs. Thus, the methodology is developed in three stages: (1) analysis of data availability the viability of each MPI; (2) prioritization of the MPIs by and expert round table (ERT); (3) applicability analysis of the prioritizing MPIs. Firstly, the analysis of viability shows that the data availability and the quality is limited, with many data source entities and big diversity of data features and quality. Secondly, the expert round table prioritized 8 MPIs regarding the EU’s targets in building renovation. Thirdly, the applicability evaluation finds out many barriers but also identifies the key points to launch the MPIs base assessment framework. The study identifies the entities that could likely carry on the data collection and other challenges like the digital building logbook (DBL) or the monitorization towards the efficient assessment of the renovation of the building.

Energy retrofit of existing buildings is one of the main keys to achieve European Union’s decarbonising objectives defined in the European Green Deal. In order to proceed into them, European policy has been adapted and several research projects are developed. The aim of this paper is to analyse the assessment methodology of the research projects, setting up the overview of the assessed fields and the criteria followed to perform and evaluate each project. As working methodology, 18 projects have been studied, firstly characterising by the main parameters and afterwards analysing the assessment followed by each one. This analysis is decomposed into five parameters: the assessment scope, reflecting the fields covered by the project’s assessment; data source, the nature of the data; verification, use of data verification strategies; and implementation of life cycle thinking in the assessment methodology. The research shows that although the projects have their bases in the EU energetic targets they also cover a wider scope, assessing many fields and combining many sources of data. However, despite the large knowledge already defined by many projects, there is a lack of global and complete roadmap to be followed.

This paper explores the feasibility of using renewable solar thermal energy linked to a salt hydrate thermochemical store (reversible chemical reaction involving the addition / removal of water from a salt) to provide a zero-carbon heating and hot water option for an average UK home. Volumetric absorption based on diluted colloidal suspensions or nanofluids containing wavelength tuneable plasmonic silver nanoparticles are a possible means for enhancing solar thermal capture. To make full use of this captured energy, it requires inter-seasonal storage in a suitable energy dense, high efficiency thermal store. As such even the potentially highest energy density obtainable for a salt hydrate thermochemical store would still need a store of greater than 35 m3 (10 MWh) to nearly meet current winter heating and hot water demands (with 1 discharge cycle per annum). With a possible increase in collector efficiency to over 70% such a system would collect enough solar energy annually to become viable for homes with a greater than average (>15 m2) roof area, a lower than median consumption (

The WGV project is an infill residential development in a middle suburb of Perth, Western Australia. Its urban planning innovation is in its attempt to demonstrate net zero carbon as well as other sustainability goals set by urban planning processes such as community engagement and the One Planet Living accreditation process. It is a contribution to the IPCC 1.5 °C agenda which seeks to achieve deep decarbonization while also delivering the UN Sustainable Development Goals (SDGs). Solar photovoltaics and battery storage are incorporated into the development and create net zero carbon power through an innovative ‘citizen utility’ with peer-to-peer trading. The multiple sustainable development features such as water sensitive design, energy efficiency, social housing, heritage retention, landscape and community involvement, are aiming to provide inclusive, safe, resilient and sustainable living and have been assessed under the SDG framework.

The consumers' perspective on low-carbon technologies is critical to decarbonise their emissions, the effect from the array of modern tariff structures and the dramatic variation in tariff rates on the technology viability is yet to be realised. Here we present a comprehensive holistic approach that includes electrification and hydrogen options to understand the trade-offs in technologies and tariffs for consumers in their energy decarbonisation which is missing from the technology specific analysis in the literature. The novel framework considers all consumer demands simultaneously through combinations of different low-carbon technologies over a 20-year lifetime, linked with conventional and emerging electricity tariff structures. Using the UK as a case study, we found that electrification is more cost-effective than hydrogen for most consumers to reduce their energy emissions and that the lowest 20-year low-carbon solution of air source heat pump, electric vehicle, and photovoltaics may have slightly (9%) higher lifetime cost to the gas boiler and petrol car baseline but can achieve 54% emission reduction using the grid electricity mix and energy tariffs in 2020. In terms of technologies, electric vehicles and solar photovoltaics are the only evaluated technologies that have the potential to reduce customer's energy costs, 8% and 0.2% respectively, alongside emissions reductions, of 28% and 2% respectively. Energy storage technologies, though significantly benefit the grid by unlocking demand-side flexibility, were not economic beneficial to customers until the tariff increase due to the energy crisis. Designing the average day rate of a tariff is most important for adopting electrified heating, on the other hand energy storage use requires low off-peak rates, where we quantified the minimum required difference in tariff peak to off-peak rates to allow energy storage financial justification. This learning can be used to help incentivise consumers to adopt these technologies, allowing greater system benefits. • With increasing cost of energy, energy storage has become viable and can mitigate high energy bills. • Appropriate tariff structure for each low-carbon technology type is critical. • Minimum peak to off-peak rate differences are found for energy storage economic viability. • Future emissions targets require direct or indirect electrification of heating and transport. [ABSTRACT FROM AUTHOR]

As manmade climate change threatens the health of the planet, it is important that we understand and address the contribution of healthcare to global emissions. Medical imaging is a significant contributor to overall emissions. This article aims to highlight key issues and examples of sustainable practices, in order to empower radiologists to make a change within their department., (© 2023. The Author(s).)

The most recent regulations, as well as the scientific studies, remark the importance of the evaluation of the entire life cycle on building renovations, relative to the environmental impact and economic feasibility, making the Life Cycle Assessment (LCA) the prioritizing analysis. The objective of the study is to develop a simplified methodology for the environmental and economic assessment of residential building renovations with life cycle approach. For this, a script-based tool-kit is developed: the first tool optimizes the thickness of envelope insulation based strategies; the second tool is for the prioritization of strategies by assessing their environmental performance and economic feasibility. In order to follow the objective, the development of the two tools is presented: both tools follow a parallel scheme where the input parameters are required by an excel file and the calculation script provides the results automatically by exporting the results excel file. The evaluation provides the quantification of the relative environmental improvement with the net energy ratio (NER), and the economic feasibility by the financial indicator of internal rate of return (IRR). The tool-kit is applied in a case study of a multifamily residential building. The results show, on the one hand, that the usability of the tool-kit can be determinant in the decision-making of stakeholders; and in the other hand, the importance of carrying out a dynamic assessment, taking into account the variation of the results caused by the uncertain parameters that differ in time. Moreover, the tool-kit can assist the development of cost-effective decarbonisation strategies. [Display omitted] • An enviro-economic assessment simplified tool-kit is provided based in LCA. • The prioritization indicators (NER, IRR) allow the relative assessment of strategies. • The optimization tool provide the optimal improvements and economic feasibility. • Dynamic assessments are necessary to cover the uncertainty of parameters. • The tool-kit is provided in open source script, applicable to other programmes. [ABSTRACT FROM AUTHOR]

• Over the technologies' typical 20-year lifetime, most UK dwellings have a cost optimum low-carbon heating system using air source heat pumps. • Dwelling properties and spatiotemporal variabilities significantly change the optimum low-carbon technology from blue hydrogen boilers, direct electrical heating, and air source heat pumps, to ground source heat pumps. • Direct electrical heating is economically preferred over heat pumps in lower demand dwellings and with analysis over shorter timescales. • Incentives for low-carbon heating need to target adoption of efficient technologies to reduce the greater increase in network demands. An understanding of heating technologies from the consumers' perspective is critical to ensure low-carbon technologies are adopted for reducing their current associated emissions. Existing studies from the consumers' perspective do not compare and optimise the full range and combinations of potential heating systems. There is also little consideration of how spatiotemporal and dwelling variations combined alter the economic and environmental effectiveness of technologies. The novelty of this paper is the creation and use of a new comprehensive framework to capture the range of heating technologies and their viability for any specific dwelling's traits and climate from customers' perspective which is missing from current studies. The model optimises combinations of prime heaters, energy sources, ancillary solar technologies and sizes, thermal energy storage sizes and tariffs with hourly heating simulation across a year and compares their operation, capital, and lifetime costs alongside emissions to realise the true preferential heating systems for customers, which could be used by various stakeholders. Using the UK as a case study, the results show electrified heating is generally the optimum lifetime cost solution, mainly from air source heat pumps coupled with photovoltaics. However, direct electrical heating becomes more economically viable as dwelling demands reduce from smaller dwellings or warmer climates, as shorter durations of the ownership are considered, or with capital cost constraints from lower income households. Understanding this is of high importance, as without correctly targeted incentives, a larger uptake of direct electrical heating may occur, which will burden the electrical network and generation to a greater extent than more efficient heat pumps. [ABSTRACT FROM AUTHOR]

The refurbishment of buildings is one of the main keys to pursue the targets of the European Green Deal, and to accomplish the European Union has applied two mechanisms among others: the European policy and the European Research and Technological Development (RTD) projects. On the one hand, the EU has published the Commission Recommendation (EU) 2019/786 with an assessment framework composed by Measurable Progress Indicators (MPI) that can be considered the main legal instrument to measure the progress of the decarbonisation together with health & wellness, social and economic related targets of the Directive 2018/844, the Energy Performance of Buildings Directive (EPBD). On the other hand, the RTD projects also pursue the targets of the EU but following their own assessment methodology composed by Key Performance Indicators (KPIs). Considering the parallelism of these two mechanisms, the objective of this study is to analyse the applicability of the EU's assessment framework by the RTD projects, establishing a critical point of view of the viability of the MPIs and identifying the barriers and challenges of the evaluation system proposed by the EU. Regarding the methodology, the applicability of MPIs by RTD projects has been analysed in five stages: (1) Identification and listing of the MPIs of EU Recommendation; (2) selection of European RTD projects; (3) identification of the KPIs applied by the projects; (4) study of the concordance of the MPIs of the Commission Recommendation's assessment framework and the KPIs of the RTD projects; (5) evaluation of the barriers and challenges of the applicability of the EU's MPIs based on the level of agreement with the projects' KPIs. This investigation shows that although some evaluation scopes of the Commission Recommendation (EU) 2019/786 do agree with high degree with RTD projects, many MPIs present barriers related to the low reliability, the absence of standardised calculation methods, and the lack of data. Besides, the assessment framework of the Commission Recommendation (EU) 2019/786 also presents challenges to improve the evaluation of the building renovation like calibration techniques, standardised input data and the shortlisting of the MPIs to improve the effectiveness of the method. The main conclusion is that the readjustment of the assessment framework proposed in the Recommendation (EU) 2019/786 is needed. This readjustment is proposed to be done by shortlisting the MPIs and defining standardised measurement methods in order to build a common roadmap that could be followed and assessed homogenously towards the decarbonisation of the European building stock. [ABSTRACT FROM AUTHOR]