Search

Many cationic polymers with varied architectures either in backbones or in side chains have been used for gene delivery. However, these polymers yielding different DNA transfection efficiency cannot answer whether backbones or side chains have more influence on DNA delivery. In this research, polyurethanes (PUs) made from the reaction of l‐lysine diisocyanate and 1,4‐piperazinediethanol were synthesized. Together with poly(l‐lysine) (PLL), these polymers were further modified to carry side chains by connecting to low‐molecular‐weight polyethylenimine (PEI) via imine linkages. The PEI was either linear (423 Da) or branched (600 Da) and grafted to the backbone representing two distinct shapes (i.e. a twig with needle‐leaves or round‐leaves). In addition, one PU derivative was synthesized to have shorter side chains (as PU‐PEI S423) than PU‐PEI423 by aminolysis reaction. These synthesized polymers were compared for their transfection potential as gene vectors into cells. Electrophoretic mobility, dynamic light scattering and zeta potential analyses of polymer/DNA complexes confirmed that, after grafting of PEI (PEI423 or PEI600), PLL‐PEIs and PU‐PEIs were able to self‐assemble with plasmid DNA to form nano‐scaled (ca 200 nm) and positively charged (ca +25 mV) complexes. These cationic polymers hardly showed any cytotoxicity on COS‐7 cells. The outcome of fluorescence imaging and flow cytometry verified that the order of greater transfection efficiency is PLL‐PEI600 = PU‐PEI600 > PLL‐PEI423 = PU‐PEI423 > PEI25K (commercial standard) = PU‐PEI S423 >> PLL > PEI423 = PEI600 (starting materials). These results reveal that the polymers with longer side chains or higher charge density have positive influence on transfection efficiency. Nevertheless, different polymer backbones may reflect their biodegradability and cytotoxicity, but their effect on transfection efficiency is less significant. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Human mesenchymal stromal cells (hMSCs) are multipotent cells that have been proposed for the treatment of immune-mediated diseases. Culturing hMSCs on tissue culture plastic reduces their therapeutic potential in part due to the lack of extracellular matrix components. The aim of this study is to evaluate multilayers of heparin and poly(L-lysine) (HEP/PLL) as a bioactive surface for hMSCs stimulated with soluble interferon gamma (IFN-γ). Multilayers were formed, via layer-by-layer assembly, with HEP as the final layer and supplemented with IFN-γ in the culture medium. Multilayer construction and chemistry were confirmed using Azure A staining, quartz crystal microbalance, and X-ray photoelectron spectroscopy. hMSCs adhesion, viability, and differentiation, were assessed. Results showed that (HEP/PLL) multilayer coatings were poorly adhesive for hMSCs. However, performing chemical crosslinking using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide significantly enhanced hMSCs adhesion and viability. The immunosuppressive properties of hMSCs cultured on crosslinked (HEP/PLL) multilayers were confirmed by measuring indoleamine 2,3-dioxygenase activity. Lastly, hMSCs cultured on crosslinked (HEP/PLL) multilayers in the presence of soluble IFN- γ successfully differentiated towards the osteogenic and adipogenic lineages as confirmed by Alizarin red, and oil-red O staining, as well as alkaline phosphatase activity. This study suggests that crosslinked (HEP/PLL) films can modulate hMSCs response to soluble factors, which may improve hMSCs-based therapies aimed at treating several immune diseases. [ABSTRACT FROM AUTHOR]

Poly(L-lysine) (PLL)-3-hydroxyphenylboronic acid (3-PBA) composite was prepared onto an Au electrode via cyclic voltammetry (CV), which was characterized by electrochemical and quartz crystal microbalance (QCM) techniques, and used to promote adhesion of plant cells. 3-PBA can interact with glycosyl compounds on the cell wall to form negatively charged covalent compounds while PLL increases the number of positively charged sites, which enhances the electrostatic interactions with the negatively charged cell wall, both promoting cell adhesion. The PLL-poly(3-PBA) composite was successfully modified on the Au electrode surface, as demonstrated by QCM and Fourier transform infrared spectrophotometry (FTIR). Moreover, we confirmed the synergistic effect of PLL and 3-PBA to adhere rice suspension cells using CV, electrochemical impedance spectroscopy (EIS), QCM and optical microscope observations. Finally, the dynamic process of rice cells’ adhesion to PLL-poly(3-PBA)/Au followed by salt stress treatment of NaCl was monitored in real-time by QCM. The cells softened at first then hardened under the action of 40 mM NaCl. This work presents a novel and conventional way to immobilize plant cells onto sensors, and has importance in the study of the structure, function and behavior of plants under various stresses at the cellular level.

This work investigated the effect of poly(l -lysine) (PLL) molecular weight and concentration on chondrogenesis of cocultures of mesenchymal stem cells (MSCs) and articular chondrocytes (ACs) in PLL-loaded hydrogels. An injectable dual-network hydrogel composed of a poly(N -isopropylacrylamide)-based synthetic thermogelling macromer and a chondroitin sulfate-based biological network was leveraged as a model to deliver PLL and encapsulate the two cell populations. Incorporation of PLL into the hydrogel did not affect the hydrogel's swelling properties and degradation characteristics, nor the viability of encapsulated cells. Coculture groups demonstrated higher type II collagen expression compared to the MSC monoculture group. Expression of hypertrophic phenotype was also limited in the coculture groups. Histological analysis indicated that the ratio of MSCs to ACs was an accurate predictor of the degree of long-term chondrogenesis, while the presence of PLL was shown to have a more substantial short-term effect. Altogether, this study demonstrates that coculturing MSCs with ACs can greatly enhance the chondrogenicity of the overall cell population and offers a platform to further elucidate the short- and long-term effect of polycationic factors on the chondrogenesis of MSC and AC cocultures. Unlabelled Image • Coculturing mesenchymal stem cells (MSCs) with chondrocytes enhanced the chondrogenic differentiation of MSCs in vitro. • The presence of chondrocytes limited the expression of hypertrophic genes from MSCs. • Loaded poly(l -lysine) in the hydrogel transiently affected the gene expression profiles of the encapsulated cell populations. • The extent of cartilage-like matrix secretion depended on the coculture ratio. [ABSTRACT FROM AUTHOR]

A ternary hybrid material composed of Ni nanoparticles (NPs), TiO2 NPs, and poly(L-lysine) (Ply) was used as a sensing material. It was electrodeposited in situ onto a commercial 433-MHz surface acoustic wave (SAW) resonator to construct a Ni-TiO2-Ply/SAW sensor. The Ni-TiO2-Ply sensing layer fully covered the resonant cavity of the SAW resonator. As the sensing layer completely covers the interdigital transducer and piezoelectric substrate, the sensing area is significantly increased, and the resonator is protected from damage or contamination. To detect the level of dopamine (DA) in serum, the fabrication of the Ni-TiO2-Ply sensing layer, distributions of various components in the sensing layer, and responses of the SAW biosensor to DA were investigated in detail. In addition, an electric field-assisted liquid-phase oxidation technique was developed for loading analytes onto the SAW sensors. After optimizing the pH value and L-lysine content of the sensing layer electrolyte and the pH value of the DA solution, the SAW biosensor responded to DA with a linear concentration range of 1 to 1000 nM, sensitivity of 5.77 MHz nM−1 cm−2, and limit of detection of 0.067 nM. Moreover, the sensor exhibited good selectivity, reproducibility, and stability at ambient temperature. Graphical abstract [ABSTRACT FROM AUTHOR]

Dendritic cell (DC) vaccine is an effective strategy for cancer immunotherapy by carrying antigen into DCs and migrating these DCs to drain lymph nodes after inoculation. In this article, second near-infrared window (NIR-II) fluorescent nanoparticles have been used to uptake antigen and activate DCs. Ovalbumin (OVA), an antigen for immunization, can be loaded on the surface of these NIR-II fluorescent nanoparticles via electrostatic interaction by virtue of their functionalized poly(L-lysine) (PLL), which exhibits biocompatibility and strong selective interaction with OVA. In addition, these antigen-loaded complexes can efficiently be engulfed by immature DCs to induce DC maturation and cytokine secretion. After subcutaneous injection, highly sensitive NIR-II fluorescence signal from nanoparticles indicates that nanoparticle-labeled DCs can successfully migrate into lymph nodes in vivo, showing great promise in immunotherapy against cancer. [ABSTRACT FROM AUTHOR]

A new electrochemical biosensor is developed for the detection of diazinon. For this purpose, a glassy carbon electrode is modified with MWCNTs and poly-l-lysine to immobilize a double-strain DNA (ds-DNA) on the surface of the electrode. In the first step, the interaction of diazinon with ds-DNA is transduced by electrochemical impedance spectroscopy and UV–Vis spectroscopy to monitor the intercalation of diazinon with DNA helix. This interaction leads to reduced interfacial charge-transfer resistance (Rct). The difference in the Rct before and after the interaction is considered as a suitable signal for diazinon detection. The proposed biosensor has a low detection limit (0.3 nmol L−1), a wide linear dynamic range (0.001‒100 µmol L−1), and high selectivity for the determination of diazinon. Finally, the performance of the biosensor for detecting of diazinon is verified in real samples such as river water, agricultural wastewater, lettuce juice, and tomato juice. [ABSTRACT FROM AUTHOR]

• PDA/PLL hybrid coatings were developed to functionalize hydroxyapatite scaffolds. • The hybrid coatings realize tunable and sustained release of BMP2. • The hybrid coatings promote BMSC adhesion and differentiation. • The coating-functionalized scaffolds possess excellent osteoinductive properties. The scaffold for bone tissue engineering should possess proper porosity, adequate mechanical properties, cell affinity for cell attachment, and the capability to bind bioactive agents to induce cell differentiation. In this study, we successfully prepared a porous hydroxyapatite (HA) scaffold that is functionalized by poly(L-lysine)/polydopamine (PLL/PDA) hybrid coating. The PLL/PDA coating takes advantages of the high protein and cell affinity of PDA, as well as the biodegradability of PLL. Therefore, the coating can anchor bone morphogenic protein-2 (BMP2) to the HA scaffold via catechol chemistry under a mild condition so as to protect the bioactivity of BMP2. Meanwhile, the coating can also release BMP2 in a tunable and sustainable manner as the PLL degrades in the physiological environment. The BMP2-entrapped PLL/PDA coating on the HA scaffold can more efficiently promote osteogenic differentiation of bone marrow stromal cells (BMSCs) in vitro and induce ectopic bone formation to a much greater level in vivo compared with a bare HA scaffold that delivers BMP2 in a burst manner. All of these results suggest that the PDA-mediated catechol modification of the HA scaffold can be an effective strategy to develop sustainable protein delivery system, and that the PLL/PDA-coated HA scaffold could be a promising candidate for bone tissue engineering applications. [ABSTRACT FROM AUTHOR]

Highlights • γ-Fe 2 O 3 was modified with silica, PEI, PEG and phenolic compound-modified poly(l -lysine). • The particles were readily internalized by the glioma cells. • Poly(l -lysine)-based coating was responsible for the increased antioxidant effects. Abstract Natural antioxidants, such as epigallocatechin-3-gallate and related phenolic compounds from tea, enhance particle cell-interactions and cellular uptake. In this study, surface of superparamagnetic iron oxide nanoparticles prepared by co-precipitation of Fe chlorides was modified with silica, polyethylenimine, poly(ethylene glycol), and poly(l -lysine) to protect the iron oxide core from redox-reactions with phenols, enhance uptake by the cells, prevent the particle aggregation, or enable conjugation with several phenol-based antioxidants. To reveal the relation between the particle uptake and chemical structure of the phenolic antioxidants, five of them were selected, namely phenol, phloroglucinol, chlorogenic, gallic, and tannic acid. After incubation of the phenol-modified nanoparticles with U87MG human glioma cells, intracellular levels of the reactive oxygen species were reduced in a similar manner, as measured by flow cytometry. Colorimetric iron assay revealed a comparable level of cell-associated particles, which was mostly independent on the applied external magnetic field. The results suggest that the poly(l -lysine)-based coating is responsible for the antioxidant effects of the particles; the phenol- and poly(l -lysine)-coatings enable effective colloidal stability in aqueous media and enhance cellular internalization of the nanoparticles. [ABSTRACT FROM AUTHOR]

Background: Cell tracking is a powerful tool to understand cellular migration, dynamics, homing and function of stem cell transplants. Nanoparticles represent possible stem cell tracers, but they differ in cellular uptake and side effects. Their properties can be modified by coating with different biocompatible polymers. To test if a coating polymer, poly(L-lysine), can improve the biocompatibility of nanoparticles applied to neural stem cells, poly(L-lysine)-coated maghemite nanoparticles were prepared and characterized. We evaluated their cellular uptake, the mechanism of internalization, cytotoxicity, viability and proliferation of neural stem cells, and compared them to the commercially available dextran-coated nanomag®-D-spio nanoparticles.Results: Light microscopy of Prussian blue staining revealed a concentration-dependent intracellular uptake of iron oxide in neural stem cells. The methyl thiazolyl tetrazolium assay and the calcein acetoxymethyl ester/propidium iodide assay demonstrated that poly(L-lysine)-coated maghemite nanoparticles scored better than nanomag®-D-spio in cell labeling efficiency, viability and proliferation of neural stem cells. Cytochalasine D blocked the cellular uptake of nanoparticles indicating an actin-dependent process, such as macropinocytosis, to be the internalization mechanism for both nanoparticle types. Finally, immunocytochemistry analysis of neural stem cells after treatment with poly(L-lysine)-coated maghemite and nanomag®-D-spio nanoparticles showed that they preserve their identity as neural stem cells and their potential to differentiate into all three major neural cell types (neurons, astrocytes and oligodendrocytes).Conclusion: Improved biocompatibility and efficient cell labeling makes poly(L-lysine)-coated maghemite nanoparticles appropriate candidates for future neural stem cell in vivo tracking studies.

The deposition of polyelectrolyte (PEL) multilayers (PEMs) of poly(l-lysine)/cellulose sulfate (PLL/CS) onto germanium (Ge) substrates depending on salt concentration (cS) and deposition step z at constant PEL concentration cPEL = 0.01 M and pH = 7.0 was studied. In situ ATR-FTIR spectroscopy was used for the quantitative determination of alternate PLL/CS deposition profiles (adsorbed amount versus z) and total deposited PEM amount. By varying cS from 0 M to 1.0 M, a maximum of deposited amount was obtained at 0.1 M, so that both no salinity (0 M) and high salinity (1.0 M) revealed deposited amounts that were far lower than for mean salinity (0.1 M). Furthermore, in situ ATR-FTIR allowed to determine the detailed modulation of the PEL composition during the consecutive PEM deposition, which was interpreted as being due to both diffusion of given PEL from the PEM interior towards the outermost region and release of the PEM upon contact with the bulk oppositely charged PEL solution. Finally, ex situ ATR-FTIR measurements on the PEL solutions after deposition of PEM-20 revealed the distinct release of PEL from the PEM solely for cS = 1.0 M, due to the highest mobility of PEL under high salt conditions. These studies help to prepare functional PEM coatings with defined thicknesses and morphologies for the passivation and activation of material surfaces in the biomedical and food field.

The structure and kinetics of the complex formed by hyaluronic acid (HA) and poly(L-lysine) (PLL) were studied by time-resolved laser light scattering, TEM, and AFM. Because HA has a hydrophilic backbone, the complexes formed by HA and PLL are different from those formed by oppositely charged polyelectrolytes both having hydrophobic backbones. Instead of forming strong aggregates and even precipitates, the complex in the presence of excess HA is stable in the studied time period. More importantly, the complex spontaneously forms core-corona structure by the rearrangement of HA chains. The core is composed of complex rich of PLL and the corona is mainly HA. Further analysis shows that the hydrogen bond formed by HA creates a barrier hindering the further relaxation of HA chains. The automatic formation of core-corona structure by PLL/HA is helpful not only to understand the relaxation of polyelectrolyte in complex, but also to develop drug carriers with desirable properties. [ABSTRACT FROM AUTHOR]

Bacterial infections and the associated morbidity and mortality due to bacterial pathogens in wounds and medical implants have been increasing as most of current coatings cannot fulfill all the requirements including excellent intrinsically antibacterial activity, low cytotoxicity, and favorable physical properties. Herein, we present a kind of antibacterial hydrogel based on ε-poly(L-lysine) (EPL) grafted carboxymethyl chitosan (CMC-g-EPL) as the inherently antibacterial matrix and the surplus EPL as highly efficient antimicrobial agent. Such hydrogels possess tunable swelling abilities with water absorption percentages of 800%-2000% and modulus varying from 10 kPa to 100 kPa, and exhibit two-stage excellent antibacterial behavior. First, the free EPL can be released from the hydrogel network for quick and highly efficient bacteria killing with 99.99% of efficacy; second, the grafted EPL endows hydrogel matrix with prolonged intrinsically antibacterial activity, especially when most of free EPL is released from the hydrogel. Overall, we provide a new insight for preparing highly effective antibacterial hydrogels. [ABSTRACT FROM AUTHOR]

The polyplexes formed by nucleic acids and polycations have received a great attention owing to their potential application in gene therapy. In our study, we report experimental results and modeling outcomes regarding the optimization of polyplex formation between the double-stranded DNA (dsDNA) and poly(L-Lysine) (PLL). The quantification of the binding efficiency during polyplex formation was performed by processing of the images captured from the gel electrophoresis assays. The design of experiments (DoE) and response surface methodology (RSM) were employed to investigate the coupling effect of key factors (pH and N/P ratio) affecting the binding efficiency. According to the experimental observations and response surface analysis, the N/P ratio showed a major influence on binding efficiency compared to pH. Model-based optimization calculations along with the experimental confirmation runs unveiled the maximal binding efficiency (99.4%) achieved at pH 5.4 and N/P ratio 125. To support the experimental data and reveal insights of molecular mechanism responsible for the polyplex formation between dsDNA and PLL, molecular dynamics simulations were performed at pH 5.4 and 7.4. [ABSTRACT FROM AUTHOR]

Angiogenesis plays an important role in both soft and hard tissue regeneration, which can be modulated by therapeutic drugs. If nanoparticles (NP) are used as vectors for drug delivery, they have to encounter endothelial cells (EC) lining the vascular lumen, if applied intravenously. Herein the interaction of unloaded polyelectrolyte complex nanoparticles (PECNP) composed of cationic poly(l-lysine) (PLL) and various anionic polysaccharides with human vascular endothelial cells (HUVEC) was analyzed. In particular PECNP were tested for their cell adhesive properties, their cellular uptake and intracellular localization considering composition and net charge. PECNP may form a platform for both cell coating and drug delivery. PECNP, composed of PLL in combination with the polysaccharides dextran sulfate (DS), cellulose sulfate (CS) or heparin (HEP), either unlabeled or labeled with fluorescein isothiocyanate (FITC) and either with positive or negative net charge were prepared. PECNP were applied to human umbilical cord vein endothelial cells (HUVEC) in both, the volume phase and immobilized phase at model substrates like tissue culture dishes. The attachment of PECNP to the cell surface, their intracellular uptake, and effects on cell proliferation and growth behavior were determined. Immobilized PECNP reduced attachment of HUVEC, most prominently the systems PLL/HEP and PLL/DS. A small percentage of immobilized PECNP was taken up by cells during adhesion. PECNP in the volume phase showed no effect of the net charge sign and only minor effects of the composition on the binding and uptake of PECNP at HUVEC. PECNP were stored in endosomal vesicles in a cumulative manner without apparent further processing. During mitosis, internalized PECNP were almost equally distributed among the dividing cells. Both, in the volume phase and immobilized at the surface, PECNP composed of PLL/HEP and PLL/DS clearly reduced cell proliferation of HUVEC, however without an apparent cytotoxic effect, while PLL/CS composition showed minor impairment. PECNP have an anti-adhesive effect on HUVEC and are taken up by endothelial cells which may negatively influence the proliferation rate of HUVEC. The negative effects were less obvious with the composition PLL/CS. Since uptake and binding for PLL/HEP was more efficient than for PLL/DS, PECNP of PLL/HEP may be used to deliver growth factors to endothelial cells during vascularization of bone reconstitution material, whereas those of PLL/CS may have an advantage for substituting biomimetic bone scaffold material.

Narrowly distributed poly(l-lysine-b-N-isopropylacrylamide) (PLL-b-PNIPAM) was prepared through ring-opening polymerization of ε-benzyloxycarbonyl-l-lysine N-carboxy-α-amino anhydride and atom transfer radical polymerization of NIPAM, followed with the removal of ε-benzyloxycarbonyl group. Then gold nanoparticles (AuNPs) grafted with PLL-b-PNIPAM (PNIPAM-PLL-AuNPs) were obtained by the reduction of chloroauric acid with sodium citrate in the presence of PLL-b-PNIPAM. PNIPAM-PLL-AuNPs and its precursors were thoroughly characterized by proton magnetic resonance spectroscope, Fourier transform infrared spectroscope, UV-vis spectroscope, transmission electron microscopy, dynamic light scattering, thermogravimetric analysis, and circular dichroism. The obtained PNIPAM-PLL-AuNPs exhibited high colloid stability even at strong alkaline (pH = 12) and acidic (pH = 2) conditions. The thermal and pH dual-responsive behaviors of the grafting PLL-b-PNIPAM chains was observed to be affected by AuNPs, while not for the secondary structure of PLL chains. Correspondingly, the surface plasmon resonance (SPR) of AuNPs was found to be sensitive to both pH value and temperature. A blue shift in the SPR happened both with increasing pH value and increasing temperature. The stimuli-response was reversible in heating-cooling cycles. The gold nanoparticles with both pH and temperature response may have potential applications in biomedical areas and biosensors.

Cylindrical copolypeptide brush PLLF- g-(PLF- b-PLL), consisting of a poly(L-lysine- co-L-phenylalanine) (PLLF) backbone and poly(L-phenylalanine)- b-poly(L-lysine) (PLF- b-PLL) amphiphilic block copolypeptide side chains, has been synthesized, characterized, and evaluated as drug and gene carriers. PLLF- g-(PLF- b-PLL) brushes were synthesized by the multi-step ring-opening polymerization of amino acid N-carboxyanhydrides via a 'grafting from' strategy. Transmission electron microscopy measurements and pyrene probe fluorescence study revealed that the synthesized copolypeptide brushes adopted nanosized cylindrical morphologies which resembled unimolecular polymeric micelles with a hydrophobic PLF core and a hydrophilic PLL periphery. An encapsulation study demonstrated that hydrophobic molecules (e.g., pyrene and oil red O) can be solubilized in the core of the copolypeptide brushes, while anionic hydrophilic molecules (e.g., rose bengal and methyl orange) can be entrapped into the brush periphery. Hydrophobic molecules and hydrophilic guests can be encapsulated simultaneously in a site-isolated state. Furthermore, the in vitro gene transfection efficiencies of copolypeptide brushes were evaluated in HEK293 and HeLa cells. The synthesized copolypeptide brushes exhibited low cytotoxicity and mediated efficient gene transfection. Our research suggested that these cylindrical copolypeptide brushes with a brush-like PLL periphery could be used as promising carriers for the codelivery of drugs and genes. [ABSTRACT FROM AUTHOR]

A novel, simple and selective electrochemical method was investigated for the simultaneous detection of dopamine (DA) and uric acid (UA) on a poly(L-lysine)/graphene oxide (GO) modified glassy carbon electrode (PLL/GO/GCE) by differential pulse voltammetry (DPV). The electrochemically prepared PLL/GO sensory platform toward the oxidation of UA and DA exhibited several advantages, including high effective surface area, more active sites and enhanced electrochemical activity. Compared to the PLL-modified GCE (PLL/GCE), GO-modified GCE and bare GCE, the PLL/GO/GCE exhibited an increase in the anodic potential difference and a remarkable enhancement in the current responses for both UA and DA. For the simultaneous detection of DA and UA, the detection limits of 0.021 and 0.074 μM were obtained, while 0.031 and 0.018 μM obtained as the detection limits for the selective detection of UA and DA, using DPV in the linear concentration ranges of 0.5 to 20.0 and 0.5 to 35 μM, respectively. In addition, the PLL/GO/GCE demonstrated good reproducibility, long-term stability, excellent selectivity and negligible interference of ascorbic acid (AA). The proposed modified electrode was successfully implemented in the simultaneous detection of DA and UA in human blood serum, urine and dopamine hydrochloride injection with satisfactory results. [ABSTRACT FROM AUTHOR]

Polylysine is a biocompatible, biodegradable, water soluble polypeptide. Thanks to the pendant primary amines it bears, it is susceptible to modification reactions. In this work Poly(L-lysine) (PLL) was partially modified via the effortless free-catalysed aza-Michael addition reaction at room temperature by grafting N-isopropylacrylamide (NIPAm) moieties onto the amines. The resulting PLL-g-NIPAm exhibited LCST-type thermosensitivity. The LCST can be tuned by the NIPAm content incorporated in the macromolecules. Importantly, depending on the NIPAm content, LCST is highly dependent on pH and ionic strength due to ionization capability of the remaining free lysine residues. PLL-g-NIPAm constitutes a novel biodegradable LCST polymer that could be used as "smart" block in block copolymers and/or terpolymers, of any macromolecular architecture, to design pH/Temperature-responsive self-assemblies (nanocarriers and/or networks) for potential bio-applications. [ABSTRACT FROM AUTHOR]

• Layer-by-layer coating of liposomes with poly(L-lysine) and poly(L-glutamic acid). • Layer-by-layer assembly to increase liposome stability in biological environment. • Coating of liposomes (so-called layersomes) confirmed by a FRET experiment. • Very homogenous formulations of layersomes with up to 6 layers of polyelectrolytes. • Enhanced stability of coated liposomes in presence of Triton™ X-100, sPLA 2 , plasma. Multilayered coated liposomes were prepared using the layer-by-layer (LbL) technique in an effort to improve their stability in biological media. The formulation strategy was based on the alternate deposition of two biocompatible and biodegradable polyelectrolytes – poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) – on negatively charged small unilamellar vesicles (SUVs). Some parameters of the formulation process were optimized such as the polyelectrolyte concentration and the purification procedure. This optimized procedure has allowed the development of very homogeneous formulations of liposomes coated with up to 6 layers of polymers (so-called layersomes). The coating was characterized by dynamic light scattering (DLS), zeta potential measurements and Förster resonance energy transfer (FRET) between two fluorescently labeled polyelectrolytes. Studies on the stability of the formulations at 4 °C in a buffered solution have shown that most structures are stable over 1 month without impacting their encapsulation capacity. In addition, fluorophore release experiments have demonstrated a better resistance of the layersomes in the presence of a non-ionic detergent (Triton™ X-100) as well as in the presence of phospholipase A 2 and human plasma. In conclusion, new multilayered liposomes have been developed to increase the stability of conventional liposomes in biological environments. [ABSTRACT FROM AUTHOR]

• A conventional interface for plant cell adhesion was created by CV polymerization. • Co-polymerization of 3-hydroxyphenylboric acid with PLL has a synergistic effect. • The dynamic adhesion of rice suspension cells to the interface was monitored by QCM. • Rice cells softened at first and then hardened under the salt stress of 40 mM NaCl. Poly(L-lysine) (PLL)-3-hydroxyphenylboronic acid (3-PBA) composite was prepared onto an Au electrode via cyclic voltammetry (CV), which was characterized by electrochemical and quartz crystal microbalance (QCM) techniques, and used to promote adhesion of plant cells. 3-PBA can interact with glycosyl compounds on the cell wall to form negatively charged covalent compounds while PLL increases the number of positively charged sites, which enhances the electrostatic interactions with the negatively charged cell wall, both promoting cell adhesion. The PLL-poly(3-PBA) composite was successfully modified on the Au electrode surface, as demonstrated by QCM and Fourier transform infrared spectrophotometry (FTIR). Moreover, we confirmed the synergistic effect of PLL and 3-PBA to adhere rice suspension cells using CV, electrochemical impedance spectroscopy (EIS), QCM and optical microscope observations. Finally, the dynamic process of rice cells' adhesion to PLL-poly(3-PBA)/Au followed by salt stress treatment of NaCl was monitored in real-time by QCM. The cells softened at first then hardened under the action of 40 mM NaCl. This work presents a novel and conventional way to immobilize plant cells onto sensors, and has importance in the study of the structure, function and behavior of plants under various stresses at the cellular level. [ABSTRACT FROM AUTHOR]

The deposition of polyelectrolyte (PEL) multilayers (PEMs) of poly(l-lysine)/cellulose sulfate (PLL/CS) onto germanium (Ge) substrates depending on salt concentration (c S ) and deposition step z at constant PEL concentration c PEL = 0.01 M and pH = 7.0 was studied. In situ ATR-FTIR spectroscopy was used for the quantitative determination of alternate PLL/CS deposition profiles (adsorbed amount versus z) and total deposited PEM amount. By varying c S from 0 M to 1.0 M, a maximum of deposited amount was obtained at 0.1 M, so that both no salinity (0 M) and high salinity (1.0 M) revealed deposited amounts that were far lower than for mean salinity (0.1 M). Furthermore, in situ ATR-FTIR allowed to determine the detailed modulation of the PEL composition during the consecutive PEM deposition, which was interpreted as being due to both diffusion of given PEL from the PEM interior towards the outermost region and release of the PEM upon contact with the bulk oppositely charged PEL solution. Finally, ex situ ATR-FTIR measurements on the PEL solutions after deposition of PEM-20 revealed the distinct release of PEL from the PEM solely for c S = 1.0 M, due to the highest mobility of PEL under high salt conditions. These studies help to prepare functional PEM coatings with defined thicknesses and morphologies for the passivation and activation of material surfaces in the biomedical and food field.

• Gene complexation affinity of polycation controls tightness and size of polyplex. • Smaller, tighter polyplex delivered more pDNA into nucleus than larger, looser one. • Larger polyplex had slower cytosolic and nuclear transport of pDNA than smaller one. • Too tighter polyplex made poor gene expression due to poor pDNA release in nucleus. • Tightness and size of polyplex strongly influence polymeric gene transfection. The delivery of plasmid DNA (pDNA) using polycations has been investigated for several decades; however, obstacles that limit efficient gene delivery still hinder the clinical application of gene therapy. One of the major limiting factors is controlling pDNA binding affinity with polymers to control the complexation and decomplexation of polyplexes. To address this challenge, polycations of α-poly(L -lysine) (APL) and ε-poly(L -lysine) (EPL) were used to prepare variable complexation/decomplexation polyplexes with binding affinities ranging from too tight to too loose and sizes ranging from small to large. APL-EPL/ATP-pDNA polyplexes were also prepared to compare the effects of endosomolytic ATP on complexation/decomplexation and the sizes of polyplexes. The results showed that smaller and tighter polyplexes delivered more pDNA into the cells and into the nucleus than the larger and looser polyplexes. Larger polyplexes exhibited slower cytosolic transport and consequently less nuclear delivery of pDNA than smaller polyplexes. Tighter polyplexes exhibited poor pDNA release in the nucleus, leading to no improvement in transfection efficiency. Thus, polyplexes should maintain a balance between complexation and decomplexation and should have optimal sizes for effective cellular uptake, cytosolic transport, nuclear import, and gene expression. Understanding the effects of complexation/decomplexation and size is important when designing effective polymer-based electrostatic gene carriers. [ABSTRACT FROM AUTHOR]

Dendritic cell (DC)-based vaccines consist of antigens and antigen-presenting cells, such as DCs, that can induce antitumor immune response and extend the lives of patients. In this research, a water-soluble conjugated polymer brush (WSCPB) made of poly(l-lysine) (PLL) and poly(p-phenyleneethynylene) (PPE) was applied to an antigen delivery system for the development of a DC vaccine. We synthesized the WSCPB with a lower proportion of the rigid PPE polymer backbone and a large amount of PLL side chains. The rigid backbone retained a stable optical performance within the experimental range, which enabled the visualization of the payload and cellular imaging as a reporter. Because of the unique brushlike structure, PPE-PLL exhibited not only excellent water solubility but also outstanding antigen-loading capacity. Ovalbumin (OVA), a model antigen in different research, could be adsorbed onto PPE-PLL and then taken up by DCs. Subsequently, DC maturation and cytokine release would be induced by the antigen. In vivo, strong immune responses were induced after the injection of antigen-pulsed DCs, and the level of cytokines in the serum was significantly increased. In addition, the study of the in vivo tumor-suppressor activity of these antigen-pulsed DCs revealed that the DC vaccine induced strong immune responses and thereby effectively inhibited tumor development.

Angiogenesis plays an important role in both soft and hard tissue regeneration, which can be modulated by therapeutic drugs. If nanoparticles (NP) are used as vectors for drug delivery, they have to encounter endothelial cells (EC) lining the vascular lumen, if applied intravenously. Herein the interaction of unloaded polyelectrolyte complex nanoparticles (PECNP) composed of cationic poly(l-lysine) (PLL) and various anionic polysaccharides with human vascular endothelial cells (HUVEC) was analyzed. In particular PECNP were tested for their cell adhesive properties, their cellular uptake and intracellular localization considering composition and net charge. PECNP may form a platform for both cell coating and drug delivery. PECNP, composed of PLL in combination with the polysaccharides dextran sulfate (DS), cellulose sulfate (CS) or heparin (HEP), either unlabeled or labeled with fluorescein isothiocyanate (FITC) and either with positive or negative net charge were prepared. PECNP were applied to human umbilical cord vein endothelial cells (HUVEC) in both, the volume phase and immobilized phase at model substrates like tissue culture dishes. The attachment of PECNP to the cell surface, their intracellular uptake, and effects on cell proliferation and growth behavior were determined. Immobilized PECNP reduced attachment of HUVEC, most prominently the systems PLL/HEP and PLL/DS. A small percentage of immobilized PECNP was taken up by cells during adhesion. PECNP in the volume phase showed no effect of the net charge sign and only minor effects of the composition on the binding and uptake of PECNP at HUVEC. PECNP were stored in endosomal vesicles in a cumulative manner without apparent further processing. During mitosis, internalized PECNP were almost equally distributed among the dividing cells. Both, in the volume phase and immobilized at the surface, PECNP composed of PLL/HEP and PLL/DS clearly reduced cell proliferation of HUVEC, however without an apparent cytotoxic effect, while PLL/CS composition showed minor impairment. PECNP have an anti-adhesive effect on HUVEC and are taken up by endothelial cells which may negatively influence the proliferation rate of HUVEC. The negative effects were less obvious with the composition PLL/CS. Since uptake and binding for PLL/HEP was more efficient than for PLL/DS, PECNP of PLL/HEP may be used to deliver growth factors to endothelial cells during vascularization of bone reconstitution material, whereas those of PLL/CS may have an advantage for substituting biomimetic bone scaffold material.

Narrowly distributed poly(l-lysine- b - N -isopropylacrylamide) (PLL- b -PNIPAM) was prepared through ring-opening polymerization of ε-benzyloxycarbonyl-l-lysine N -carboxy-α-amino anhydride and atom transfer radical polymerization of NIPAM, followed with the removal of ε-benzyloxycarbonyl group. Then gold nanoparticles (AuNPs) grafted with PLL- b -PNIPAM (PNIPAM-PLL-AuNPs) were obtained by the reduction of chloroauric acid with sodium citrate in the presence of PLL- b -PNIPAM. PNIPAM-PLL-AuNPs and its precursors were thoroughly characterized by proton magnetic resonance spectroscope, Fourier transform infrared spectroscope, UV-vis spectroscope, transmission electron microscopy, dynamic light scattering, thermogravimetric analysis, and circular dichroism. The obtained PNIPAM-PLL-AuNPs exhibited high colloid stability even at strong alkaline (pH = 12) and acidic (pH = 2) conditions. The thermal and pH dual-responsive behaviors of the grafting PLL- b -PNIPAM chains was observed to be affected by AuNPs, while not for the secondary structure of PLL chains. Correspondingly, the surface plasmon resonance (SPR) of AuNPs was found to be sensitive to both pH value and temperature. A blue shift in the SPR happened both with increasing pH value and increasing temperature. The stimuli-response was reversible in heating-cooling cycles. The gold nanoparticles with both pH and temperature response may have potential applications in biomedical areas and biosensors.

Angiogenesis is naturally balanced by many pro- and anti-angiogenic factors while an imbalance of these factors leads to aberrant angiogenesis, which is closely associated with many diseases. Gene therapy has become a promising strategy for the treatment of such a disordered state through the introduction of exogenous nucleic acids that express or silence the target agents, thereby engineering neovascularization in both directions. Numerous non-viral gene delivery nanoparticles have been investigated towards this goal, but their clinical translation has been hampered by issues associated with safety, delivery efficiency, and therapeutic effect. This review summarizes key factors targeted for therapeutic angiogenesis and anti-angiogenesis gene therapy, non-viral nanoparticle-mediated approaches to gene delivery, and recent gene therapy applications in pre-clinical and clinical trials for ischemia, tissue regeneration, cancer, and wet age-related macular degeneration. Enhanced nanoparticle design strategies are also proposed to further improve the efficacy of gene delivery nanoparticles to modulate angiogenesis., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Numerous growth factors account for tissue and organ development and therapeutic efficiency. Hence, the delivery of growth factors is crucial in regenerative medical practice. However, the delivery of a single factor to regenerate tissues lacks clinical utility in many current approaches. We reported the delivery of the bioactive vascular endothelial growth factor (VEGF) from novel polymeric vesicles. Polymeric vesicles were prepared from the poly(l-lysine)-g-polylysine(AA) amphiphilic graft copolymer through the conjugation of arachidic acid (AA) with poly(l-lysine) for obtaining a VEGF carrier. The prepared copolymer can form a polymersome and effectively condense with VEGF without affecting its size and surface charges. The Gaussian curve fit (GCF) of amide I band were revealed that VEGF efficiently interact through the α-helix of the amphiphilic graft copolymer rather than β-sheet dominated poly(l-lysine). The polymersome-VEGF complex showed a considerably higher binding affinity, transfection efficiency, and less toxicity because of the peptide-based polymer backbone. Compared with the poly(l-lysine)-VEGF complex, polymersome-VEGF revealed a high secretion of VEGF and low toxicity. These polymersomes can deliver angiogenic factors in a controlled manner in tissue regeneration and biomedical engineering., (Copyright © 2017. Published by Elsevier B.V.)

This Article describes the generation and study of surfaces modified with custom-crafted poly(l-lysine) (PLL) coatings for use in the loading and delivery of single-stranded DNA (ssDNA). The experimental strategy utilizes bidentate dithiol adsorbates to generate stably bound azide-terminated self-assembled monolayers (SAMs) on gold possessing an oligo(ethylene glycol) (OEG) spacer. Consequent to the molecular assembly on gold, the azide termini are covalently attached to a maleimide linker moiety via a copper-catalyzed azide-alkyne "click" reaction. Functionalization with maleimide provides a platform for the subsequent attachment of cysteine-terminated poly(l-lysine) (PLL), thus forming a suitable surface for the loading of ssDNA via electrostatic interactions. In efforts to maximize DNA loading, we generate SAMs containing mixtures of short and long PLL segments and explore the DNA-loading capability of the various PLL SAMs. We then use thermal increases to trigger the release of the ssDNA from the surface. By examining the loading and release of ssDNA using these new two-dimensional systems, we gain preliminary insight into the potential efficacy of this approach when using three-dimensional gold nanostructure systems in future gene-delivery and biosensing applications.

The purpose of this research was to evaluate the protective effects of insulin-loaded poly(ethylene glycol)-b-poly((2-aminoethyl-l-glutamate)-g-poly(l-lysine)) (PEG-b-P(ELG-g-PLL)) on renal ischemia/reperfusion (I/R) injury in rats with diabetes mellitus. Rats were preconditioned with free insulin or insulin/PEG-b-P(ELG-g-PLL) polyplexes, then subjected to renal I/R. The blood and kidneys were then harvested, Glucose uptake rate, glucose transporter 4 (GULT4) mRNA level, cell membrane GULT4 content and GULT4 expression were measured, the level of serum creatinine and blood urea nitrogen were determined, the activity of superoxide dismutase and inducible nitric oxide synthase, the content of malondialdehyde and nitric oxide, reactive oxygen species (ROS) production and nuclear factor κB (NF-κB) mRNA level, Bcl-2 assaciated x protein (Bax) mRNA and B cell lymphoma/lewkmia-2 (Bcl-2) mRNA level, and the expression of protein 47kDa phagocyte oxidase (p47phox) in renal tissues were measured. Insulin preconditioning improved the recovery of renal function, reduced oxidative stress injury, restored nitroso-redox balance and downregulated the expression of p47phox induced by renal I/R injury, while the application of block copolymer PEG-b-P(ELG-g-PLL) as an insulin nanocarrier significantly enhanced the protective effect of insulin. Block copolymer PEG-b-P(ELG-g-PLL) could be used as a potential nanocarrier for insulin with sustained release and enhanced bioavailability., (Copyright © 2017 Elsevier Masson SAS. All rights reserved.)

Background: Cell tracking is a powerful tool to understand cellular migration, dynamics, homing and function of stem cell transplants. Nanoparticles represent possible stem cell tracers, but they differ in cellular uptake and side effects. Their properties can be modified by coating with different biocompatible polymers. To test if a coating polymer, poly(L-lysine), can improve the biocompatibility of nanoparticles applied to neural stem cells, poly(L-lysine)-coated maghemite nanoparticles were prepared and characterized. We evaluated their cellular uptake, the mechanism of internalization, cytotoxicity, viability and proliferation of neural stem cells, and compared them to the commercially available dextran-coated nanomag(®)-D-spio nanoparticles., Results: Light microscopy of Prussian blue staining revealed a concentration-dependent intracellular uptake of iron oxide in neural stem cells. The methyl thiazolyl tetrazolium assay and the calcein acetoxymethyl ester/propidium iodide assay demonstrated that poly(L-lysine)-coated maghemite nanoparticles scored better than nanomag(®)-D-spio in cell labeling efficiency, viability and proliferation of neural stem cells. Cytochalasine D blocked the cellular uptake of nanoparticles indicating an actin-dependent process, such as macropinocytosis, to be the internalization mechanism for both nanoparticle types. Finally, immunocytochemistry analysis of neural stem cells after treatment with poly(L-lysine)-coated maghemite and nanomag(®)-D-spio nanoparticles showed that they preserve their identity as neural stem cells and their potential to differentiate into all three major neural cell types (neurons, astrocytes and oligodendrocytes)., Conclusion: Improved biocompatibility and efficient cell labeling makes poly(L-lysine)-coated maghemite nanoparticles appropriate candidates for future neural stem cell in vivo tracking studies.

Despite the long history of nanoparticulate calcium phosphate (CaP) as a non-viral transfection agent, there has been limited success in attempts to optimize its properties for transfection comparable in efficiency to that of viral vectors. Here we focus on the optimization of: (a) CaP nanoparticle precipitation conditions, predominantly supersaturation and Ca/P molar ratios; (b) transfection conditions, mainly the concentrations of the carrier and plasmid DNA; (c) the presence of surface additives, including citrate anion and cationic poly(l-lysine) (PLL). CaP nanoparticles significantly improved transfection with plasmid DNA encoding enhanced green fluorescent protein (eGFP) in pre-osteoblastic MC3T3-E1 cells compared to a commercial non-viral carrier. At the same time they elicited significantly lesser cytotoxicity than the commercial carrier. Plasmid DNA acted as a nucleation promoter, decreasing the nucleation lag time of metastable CaP solutions and leading to a higher rate of nucleation and a lower size of the precipitated particles. The degree of supersaturation (DS) of 15 was found to be more optimal for transfection than that of 12.5 or 17.5 and higher. Because CaP particles precipitated at DS 15 were spherical, while DS 17.5 and 21 yielded acicular particles, it was concluded that spherical particle morphologies were more conducive to transfection than the anisotropic ones. Even though the yield at DS 15 was 10 and 100 times lower than that at DS 17.5 and 21, respectively, transfection rates were higher using CaP nanoparticle colloids prepared at DS 15 than using those made at higher or lower DS, indicating that the right particle morphology can outweigh the difference in the amount of the carrier, even when this difference is close to 100×. In contrast to the commercial carrier, the concentration of CaP-pDNA delivered to the cells was directly proportional to the transfection rate. Osteosarcoma K7M2 cells were four times more easily transfectable with CaP nanoparticles than the MC3T3-E1 cells. The addition of citrate increased the transfection rate at lower concentrations; however, a complete redispersal of CaP-pDNA nanoparticles at higher concentrations of citrate coincided with a complete diminishment of transfection, implying the benefits of partial aggregation of CaP nanoparticles carrying pDNA. In contrast, PLL delayed transfection initially, but enhanced it at longer time points (⩾96h), leading to the conclusion that both citrate and PLL could exert positive effects on transfection: citrate if added at low concentrations and PLL to extend transfection over longer periods of time., (Copyright © 2016 Elsevier Inc. All rights reserved.)

This data article presents data associated with the research article entitled "Evaluation of cell-laden polyelectrolyte hydrogels incorporating poly(L-lysine) for applications in cartilage tissue engineering" (Lam et al., 2016) [1]. Synthetic hydrogel composites fabricated using oligo(poly(ethylene glycol) fumarate) (OPF) macromers were utilized as vehicles for the incorporation of poly(L-lysine) (PLL) as well as the encapsulation of mesenchymal stem cells (MSCs). PLL-laden and PLL-free hydrogels were fabricated to characterize the main and interaction effects of OPF molecular weight, PLL molecular weight, and PLL loading density on the swelling and degradation of synthetic OPF hydrogels. Cells were then encapsulated within such hydrogels for in vitro culture and examined for viability, biochemical activity, and chondrogenic gene expression. These data, which are supplementary to the associated research article (Lam et al., 2016) [1], are presented here.

To address the lack of reliable long-term solutions for cartilage injuries, strategies in tissue engineering are beginning to leverage developmental processes to spur tissue regeneration. This study focuses on the use of poly(L-lysine) (PLL), previously shown to up-regulate mesenchymal condensation during developmental skeletogenesis in vitro, as an early chondrogenic stimulant of mesenchymal stem cells (MSCs). We characterized the effect of PLL incorporation on the swelling and degradation of oligo(poly(ethylene) glycol) fumarate) (OPF)-based hydrogels as functions of PLL molecular weight and dosage. Furthermore, we investigated the effect of PLL incorporation on the chondrogenic gene expression of hydrogel-encapsulated MSCs. The incorporation of PLL resulted in early enhancements of type II collagen and aggrecan gene expression and type II/type I collagen expression ratios when compared to blank controls. The presentation of PLL to MSCs encapsulated in OPF hydrogels also enhanced N-cadherin gene expression under certain culture conditions, suggesting that PLL may induce the expression of condensation markers in synthetic hydrogel systems. In summary, PLL can function as an inductive factor that primes the cellular microenvironment for early chondrogenic gene expression but may require additional biochemical factors for the generation of fully functional chondrocytes., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Introduction of an efficient gene delivery vector is still the main challenge of gene therapy. Both polyethylenimine (PEI) and poly(l-lysine) (PLL) comprise disadvantages which limited their application. To explore whether their deficiencies could be compensated by preparing copolymers consisting of both PLL and PEI, we generated several combinations of PLL-alkyl-PEI copolymers conjugated to aptamer and evaluated their both gene delivery efficiency and down-regulation of Bcl-XL, an anti-apoptotic gene, in lung cancer cell line. PLL was conjugated to either 10% or 50% of PEI by grafting different percentages of PEI to alkylated-PLL as core. The properties of modified polymers including size, surface charge density, DNA condensation ability, buffering capacity and cytotoxicity were evaluated. According to transfection results, aptamer conjugated PLL-alkyl-10%-PEI (PLPE8%) was selected for further gene silencing study by plasmid shRNA. Decrease in Bcl-XL gene expression was estimated by both RT-PCR and western-blot experiments. The obtained results revealed that the new copolymers had appropriate nano-scale size (117-128 nm) even after aptamer conjugation (168-183 nm). Moreover, they exhibited increased transfection efficiencies by up to 1.8-5 folds and acceptable cytotoxicity. The apoptosis was induced in transfected cells by shRNA-aptamer-copolymer due to the down-regulation of mRNA and protein levels. This study suggested a new vector for targeted non-viral gene delivery with high transfection efficiency in lung cancer or pulmonary systems., (Copyright © 2015 Elsevier B.V. All rights reserved.)