Search

The integration of metal-organic frameworks (MOFs) into composite systems serves as an effective strategy to increase the processability of these materials. Notably, MOF/fiber composites have shown much promise as protective equipment for the capture and remediation of chemical warfare agents. However, the practical application of these composites requires an understanding of their mass transport properties, as both mass transfer resistance at the surface and diffusion within the materials can impact the efficacy of these materials. In this work, we synthesized composite fibers of MOF-808 and amidoxime-functionalized polymers of intrinsic microporosity (PIM-1-AX) and measured the adsorption and mass transport behavior of n -hexane and 2-chloroethyl ethyl sulfide (CEES), a sulfur mustard simulant. We developed a new Fickian diffusion model for cylindrical shapes to fit the dynamic adsorption data obtained from a commercial volumetric adsorption apparatus and found that mass transport behavior in composite fibers closely resembled that in the pure PIM fibers, regardless of MOF loading. Moreover, we found that n -hexane adsorption mirrors that of CEES, indicating that it could be used as a structural mimic for future adsorption studies of the sulfur mustard simulant. These preliminary insights and the new model introduced in this work lay the groundwork for the design of next-generation composite materials for practical applications.

Industrialization over the past two centuries has resulted in a continuous rise in global CO 2 emissions. These emissions are changing ecosystems and livelihoods. Therefore, methods are needed to capture these emissions from point sources and possibly from our atmosphere. Though the amount of CO 2 is rising, it is challenging to capture directly from air because its concentration in air is extremely low, 0.04%. In this study, amines installed inside metal-organic frameworks (MOFs) are investigated for the adsorption of CO 2 , including at low concentrations. The amines used are polyamidoamine dendrimers that contain many primary amines. Chemically reversible adsorption of CO 2 via carbamate formation was observed, as was enhanced uptake of carbon dioxide, likely via dendrimer-amide-based physisorption. Limiting factors in this initial study are comparatively low dendrimer loadings and slow kinetics for carbon dioxide uptake and release, even at 80 °C.

CALF-20, a Zn-triazolate-based metal-organic framework (MOF), is one of the most promising adsorbent materials for CO 2 capture. However, competitive adsorption of water severely limits its performance when the relative humidity (RH) exceeds 40%, limiting the potential implementation of CALF-20 in practical settings where CO 2 is saturated with moisture, such as postcombustion flue gas. In this work, three newly designed MOFs related to CALF-20, denoted as NU-220, CALF-20M-w, and CALF-20M-e that feature hydrophobic methyltriazolate linkers, are presented. Inclusion of methyl groups in the linker is proposed as a strategy to improve the uptake of CO 2 in the presence of water. Notably, both CALF-20M-w and CALF-20M-e retain over 20% of their initial CO 2 capture efficiency at 70% RH─a threshold at which CALF-20 shows negligible CO 2 uptake. Grand canonical Monte Carlo simulations reveal that the methyl group hinders water network formation in the pores of CALF-20M-w and CALF-20M-e and enhances their CO 2 selectivity over N 2 in the presence of a high moisture content. Moreover, calculated radial distribution functions indicate that introducing the methyl group into the triazolate linker increases the distance between water molecules and Zn coordination bonds, offering insights into the origin of the enhanced moisture stability observed for CALF-20M-w and CALF-20M-e relative to CALF-20. Overall, this straightforward design strategy has afforded more robust sorbents that can potentially meet the challenge of effectively capturing CO 2 in practical industrial applications.

Zirconium-based metal-organic frameworks (MOFs) are candidate materials for effective nerve agent detoxification due to their thermo- and water stability as well as high density of catalytic Zr sites. However, as high-porosity materials, most of the active sites of Zr-MOFs can only be accessed by diffusion into the crystal interior. Therefore, the transport of nerve agents in nanopores is an important factor in the catalytic performance of Zr-MOFs. Here, we investigated the transport process and mechanism of a vapor-phase nerve agent simulant, dimethyl methyl phosphonate (DMMP), through a representative Zr-MOF, NU-1008, under practical conditions of varying humidity. Confocal Raman microscopy was used to monitor the transport of DMMP vapor through individual NU-1008 crystallites, where the relative humidity (RH) of the environment was tuned to understand the impact of water. Counterintuitively, water in the MOF channels, instead of blocking DMMP transport, assists DMMP diffusion; indeed, the transport diffusivity ( D t ) of DMMP in NU-1008 is one order of magnitude higher at 70% than 0% RH. To understand the mechanism, magic angle spinning NMR and molecular dynamics simulations were performed and suggested that high water content in the channels prevents DMMP from hydrogen-bonding with the nodes, allowing for faster diffusion of DMMP in the channels. The simulated self-diffusivity ( D s ) of DMMP is observed to be concentration-dependent. At low loading of DMMP, D s is higher at 70% RH than 0% RH, while at high loadings the trend reverses due to the DMMP aggregation in water and the reduction of free volume in channels.

Stabilizing the escalating CO 2 levels in the atmosphere is a grand challenge in view of the increasing global demand for energy, the majority of which currently comes from the burning of fossil fuels. Capturing CO 2 from point source emissions using solid adsorbents may play a part in meeting this challenge, and metal-organic frameworks (MOFs) are considered to be a promising class of materials for this purpose. It is important to consider the co-adsorption of water when designing materials for CO 2 capture from post-combustion flue gases. Computational high-throughput screening (HTS) is a powerful tool to identify top-performing candidates for a particular application from a large material database. Using a multi-scale modeling strategy that includes a machine learning model, density functional theory (DFT) calculations, force field (FF) optimization, and grand canonical Monte Carlo (GCMC) simulations, we carried out a systematic computational HTS of the all-solvent-removed version of the computation-ready experimental metal-organic framework (CoRE-MOF-2019) database for selective adsorption of CO 2 from a wet flue gas mixture. After initial screening based on the pore diameters, a total of 3703 unique MOFs from the database were considered for screening based on the FF interaction energies of CO 2 , N 2 , and H 2 O molecules with the MOFs. MOFs showing stronger interactions with CO 2 compared to that with H 2 O and N 2 were considered for the next level of screening based on the interaction energies calculated from DFT. CO 2 -selective MOFs from DFT screening were further screened using two-component (CO 2 and N 2 ) and finally three-component (CO 2 , N 2 , and H 2 O) GCMC simulations to predict the CO 2 capacity and CO 2 /N 2 selectivity. Our screening study identified MOFs that show selective CO 2 adsorption under wet flue gas conditions with significant CO 2 uptake capacity and CO 2 /N 2 selectivity in the presence of water vapor. We also analyzed the nature of pore confinements responsible for the observed CO 2 selectivity.

Carbon capture, storage, and utilization (CCSU) represents an opportunity to mitigate carbon emissions that drive global anthropogenic climate change. Promising materials for CCSU through gas adsorption have been developed by leveraging the porosity, stability, and tunability of extended crystalline coordination polymers called metal-organic frameworks (MOFs). While the development of these frameworks has yielded highly effective CO 2 sorbents, an in-depth understanding of the properties of MOF pores that lead to the most efficient uptake during sorption would benefit the rational design of more efficient CCSU materials. Though previous investigations of gas-pore interactions often assumed that the internal pore environment was static, discovery of more dynamic behavior represents an opportunity for precise sorbent engineering. Herein, we report a multifaceted in situ analysis following the adsorption of CO 2 in MOF-808 variants with different capping agents (formate, acetate, and trifluoroacetate: FA, AA, and TFA, respectively). In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis paired with multivariate analysis tools and in situ powder X-ray diffraction revealed unexpected CO 2 interactions at the node associated with dynamic behavior of node-capping modulators in the pores of MOF-808, which had previously been assumed to be static. MOF-808-TFA displays two binding modes, resulting in higher binding affinity for CO 2 . Computational analyses further support these dynamic observations. The beneficial role of these structural dynamics could play an essential role in building a deeper understanding of CO 2 binding in MOFs.

Metal-organic frameworks (MOFs) are highly tunable materials with potential for use as porous media in non-thermal adsorption or membrane-based separations. However, many separations target molecules with sub-angstrom differences in size, requiring precise control over the pore size. Herein, we demonstrate that this precise control can be achieved by installing a three-dimensional linker in an MOF with one-dimensional channels. Specifically, we synthesized single crystals and bulk powder of NU-2002 , an isostructural framework to MIL-53 with bicyclo[1.1.1]pentane-1,3-dicarboxylic acid as the organic linker component. Using variable-temperature X-ray diffraction studies, we show that increasing linker dimensionality limits structural breathing relative to MIL-53. Furthermore, single-component adsorption isotherms demonstrate the efficacy of this material for separating hexane isomers based on the different sizes and shapes of these isomers.

Active regulation of pore accessibility in microporous materials by external stimuli has aroused great attention in recent years. Here, we show the first experimental proof that guest adsorption in a dielectric microporous material can be regulated by a moderate external E-field below the gas breakdown voltage. CO 2 adsorption capacity in MIL-53 (Al) was significantly reduced, whereas that of NH 2 -MIL-53 (Al) changed insignificantly under a direct current E-field gradient of 286 V/mm. Ab initio DFT calculations revealed that the E-field decreased the charge transfer between the CO 2 molecule and the adsorption site in the MIL-53 framework, which resulted in reduced binding energy and consequently lowered CO 2 adsorption capacity. This effect was only observed in the narrow pore state MIL-53 (Al) but not in its large pore configuration. Our results demonstrate the feasibility of regulating the adsorption of gas molecules in microporous materials using moderate E-fields.

The rational design and synthesis of robust metal-organic frameworks (MOFs) based on novel organic building blocks are fundamental aspects of reticular chemistry. Beyond simply fabricating new organic linkers, however, it is important to elucidate structure-property relationships at the molecular level to develop high-performing materials. In this work, we successfully targeted a highly porous and robust cage-type MOF (NU-200) with an nbo -derived fof topology through the deliberate assembly of a cyclohexane-functionalized iron(II)-clathrochelate-based meta -benzenedicarboxylate linker with a Cu 2 (CO 2 ) 4 secondary building unit (SBU). NU-200 exhibited an outstanding adsorption capacity of xenon and a high ideal adsorbed solution theory (IAST) predicted selectivity for a 20/80 v/v mixture of xenon (Xe)/krypton (Kr) at 298 K and 1.0 bar. Our extensive computational simulations with grand canonical Monte Carlo (GCMC) and density functional theory (DFT) on NU-200 indicated that the MOF's hierarchical bowl-shaped nanopockets surrounded by custom-designed cyclohexyl groups─instead of the conventionally believed open metal sites (OMSs)─played a crucial role in reinforcing Xe-binding affinity. The optimally sized pockets firmly trapped Xe through numerous supramolecular interactions including Xe···H, Xe···O, and Xe···π. Additionally, we validated the unique pocket confinement effect by experimentally and computationally employing the similarly sized probe, sulfur dioxide (SO 2 ), which provided significant insights into the molecular underpinnings of the high uptake of SO 2 (11.7 mmol g -1 ), especially at a low pressure of 0.1 bar (8.5 mmol g -1 ). This work therefore can facilitate the judicious design of organic building blocks, producing MOFs featuring tailor-made pockets to boost gas adsorption and separation performances.

The development of adsorbents with molecular precision offers a promising strategy to enhance storage of hydrogen and methane─considered the fuel of the future and a transitional fuel, respectively─and to realize a carbon-neutral energy cycle. Herein we employ a postsynthetic modification strategy on a robust metal-organic framework (MOF), MFU-4l, to boost its storage capacity toward these clean energy gases. MFU-4l-Li displays one of the best volumetric deliverable hydrogen capacities of 50.2 g L -1 under combined temperature and pressure swing conditions (77 K/100 bar → 160 K/5 bar) while maintaining a moderately high gravimetric capacity of 9.4 wt %. Moreover, MFU-4l-Li demonstrates impressive methane storage performance with a 5-100 bar usable capacity of 251 cm 3 (STP) cm -3 (0.38 g g -1 ) and 220 cm 3 (STP) cm -3 (0.30 g g -1 ) at 270 and 296 K, respectively. Notably, these hydrogen and methane storage capacities are significantly improved compared to those of its isoreticular analogue, MFU-4l, and place MFU-4l-Li among the best MOF-based materials for this application.

We report uptake capacities and transport diffusivities, D , for each of eight linear alkanes (ranging from C 5 to C 16 ) in quartz crystal-supported films of solvent-evacuated ZIF-8. Analyses of the alkane uptake profiles revealed that the transport dynamics are governed by guest diffusion through metal-organic framework (MOF) (ZIF-8) crystallites rather than by rates of entry into films at the MOF/vapor interface. The obtained diffusivities range from just over 10 -18 m 2 /s to just under 10 -14 m 2 /s. Notably, minimum cross-sectional widths for all guests exceed the crystallographically measured width of ZIF-8's largest apertures and imply consistently with previous experimental and computational studies that apertures expand to accommodate guest uptake. On average, each additional carbon decreases the transport diffusivity of an alkane by twofold. Closer examination, however, reveals an odd-even effect such that linear alkanes having even numbers of carbons diffuse more rapidly than alkanes featuring one more or one less carbon atom. Thus, ZIF-8's differentiation of transport diffusivities for pairs of alkanes differing in length by only one carbon atom can be significantly greater than the aforementioned factor of 2. Elucidation of the microscopic basis for the odd-even behavior, however, awaits the outcome of molecular dynamics calculations that are beyond the scope of the present study. For compact, solvothermally prepared films, guest transport is dominated by 1D diffusion from the film/vapor interface and toward the underlying quartz crystal. For much lower density, electrophoretically deposited (EPD) films, crystallites behave nearly independently, and guest transport can be adequately modeled by assuming rapid permeation of macroscopic voids between crystallites, followed by entry and rate-limiting radial diffusion into isolated crystallites. One consequence is that EPD films can be much more rapidly infiltrated by molecular guests than can compact, solvothermally grown films. The combined results have potentially favorable implications for the development of kinetic separation schemes for closely related analytes.

Organophosphorus nerve agents, a class of extremely toxic chemical warfare agents (CWAs), have remained a threat to humanity because of their continued use against civilian populations. To date, Zr(IV)-based metal organic framework (MOFs) are the most prevalent nerve agent hydrolysis catalysts, and relatively few reports disclose MOFs containing nodes with other Lewis acidic transition metals. In this work, we leveraged this synthetic tunability to explore how the identity of the transition metal node in the M-MFU-4l series of MOFs (M = Zn, Cu, Ni, Co) influences the catalytic performance toward the hydrolysis of the nerve agent simulant dimethyl (4-nitrophenyl)phosphate (DMNP). Experimental studies reveal that Cu-MFU-4l exhibits the best performance in this series with a half-life for hydrolysis of ∼2 min under these conditions. In contrast, both Ni- and Co-MFU-4l demonstrate significantly slower reactivity toward DMNP, as they both fail to surpass 30% conversion of DMNP after 1 h under analogous conditions. Further modification of the active site within Cu-MFU-4l is possible, and we found that although the identity of the anion coordinated to the Cu(II)-X (X = Cl - , HCOO - , ClO 4 - , NO 3 - ) active site has little influence on the catalytic performance, reduction of the Cu(II) sites yields nodes that contain Cu(I) ions in a trigonal geometry with open metal sites, leading to remarkable catalytic activity with a half-life for hydrolysis less than 2 min. Computational studies indicate the Cu(I) sites exhibit stronger binding affinities than Cu(II) to both water and DMNP, which corroborates the experimental results.