Search

Between 2014 and 2018, the National Oceanic and Atmospheric Administration conducted the NOAA Satellite Observing System Architecture (NSOSA) study to plan for the next generation of operational environmental satellites. The study generated some important questions that could be addressed by observing system simulation experiments (OSSEs). This paper describes a series of OSSEs in which benefits to numerical weather prediction from existing observing systems are combined with enhancements from potential future capabilities. Assessments include the relative value of the quantity of different types of thermodynamic soundings for global numerical weather applications. We compare the relative impact of several sounding configuration scenarios for infrared (IR), microwave (MW), and radio occultation (RO) observing capabilities. The main results are 1) increasing the revisit rate for satellite radiance soundings produces the largest benefits but at a significant cost by requiring an increase in the number of polar-orbiting satellites from 2 to 12; 2) a large positive impact is found when the number of RO soundings per day is increased well beyond current values and other observations are held at current levels of performance; 3) RO can be used as a mitigation strategy for lower MW/IR sounding revisit rates, particularly in the tropics; and 4) smaller benefits result from increasing the horizontal resolution along the track of the satellites of MW/IR satellite radiances. Furthermore, disaggregating IR and MW instruments into six evenly distributed sun-synchronous orbits is slightly more beneficial than when the same instruments are combined and collocated on three separate orbits. SIGNIFICANCE STATEMENT: The results of this paper are significant because they inform decision-makers about the future configuration of the NOAA's environmental satellite constellation, which serves millions of diverse users. [ABSTRACT FROM AUTHOR]

With hyperspectral instruments measuring radiation emitted by Earth and its atmosphere in the thermal infrared range in multiple channels, several studies were made to select a subset of channels in order to reduce the number of channels to be used in a data assimilation system. An optimal selection of channels based on the information content depends on several factors related to observation and background error statistics and the assimilation system itself. An optimal channel selection for the Cross-track Infrared Sounder (CrIS) was obtained and then compared to selections made for different NWP systems. For instance, the channel selection of Carminati has 224 channels also present in our optimal selection, which includes 455 channels. However, in terms of analysis error variance, the difference between the two selections is small. Integrated over the whole profile, the relative difference is equal to 15.3% and 4.5% for temperature and humidity, respectively. Also, different observation error covariance matrices were considered to evaluate the impact of this matrix on channel selection. Even though the channels selected optimally were different in terms of which channels were selected for the various R matrices, the results in terms of analysis error are similar. Significance Statement: Satellites measure radiation from Earth and its atmosphere in the thermal infrared. Those radiance data contain thousands of measurements, called channels, and thus, a selection needs to be done retaining most of the information content since the large number of individual pieces of information is not usable for numerical weather prediction systems. The goal of this paper is to find an optimal selection for the instrument CrIS and to compare this selection with selections made for different numerical weather prediction systems. It was found that even though the channels selected optimally were different in terms of which channels were selected compared to other selections, the results in terms of precision of the analysis are similar and the results in terms of analysis error are similar due to the nature of hyperspectral instruments, which have multiple Jacobians overlapping. [ABSTRACT FROM AUTHOR]

This paper describes the rainfall and microphysical structure of precipitation associated with Tropical Cyclone Ockhi using polarimetric Doppler weather radar (PDWR) products. The study reports the statistical analysis of precipitation types of tropical cyclone cloud systems over the north Indian Ocean, by combining the observations of the PDWR and disdrometer for the first time. There are few studies that mention initial DWR observations of TC over this low-latitude region below 23.5°N. We tried to further carry out a statistical analysis of precipitating clouds in a cyclone from its depression stage to severe cyclonic stage. This study tries to classify and quantify the contribution of convective and stratiform rain to the total TC rainfall. Precipitating clouds have been classified into convective and stratiform based on reflectivity measurements. The vertical profiles (VPRs) of the radar reflectivity Z and the differential reflectivity ZDR obtained for the stratiform and the convective events are compared. A study of the VPR of the convective events reveals that the Z and ZDR parameters tend to increase as the raindrops descend toward the ground owing to enhanced collision–coalescence processes. The VPR of stratiform rain shows signatures of the bright band (BB). The drop size distribution (DSD) parameters and rainfall rate pertaining to the two different precipitation regimes are estimated from the radar data and have been compared. The Joss–Waldvogel Disdrometer measurements have been used to derive DSD parameters and polarimetric rain-rate relation. [ABSTRACT FROM AUTHOR]

The global positioning system dropwindsonde has provided thousands of high-resolution kinematic and thermodynamic soundings in and around tropical cyclones (TCs) since 1997. These data have revolutionized the understanding of TC structure, improved forecasts, and validated observations from remote sensing platforms. About 400 peer-reviewed studies on TCs using these data have been published to date. This paper reviews the history of dropwindsonde observations, changes to dropwindsonde technology since it was first used in TCs in 1982, and how the data have improved forecasting and changed our understanding of TCs. [ABSTRACT FROM AUTHOR]

Numerical weather prediction models operate on grid spacings of a few kilometers, where deep convection begins to become resolvable. Around this scale, the emergence of coherent structures in the planetary boundary layer, often hypothesized to be caused by cold pools, forces the transition from shallow to deep convection. Yet, the kilometer-scale range is typically not resolved by standard surface operational measurement networks. The measurement campaign Field Experiment on Submesoscale Spatio-Temporal Variability in Lindenberg (FESSTVaL) aimed at addressing this gap by observing atmospheric variability at the hectometer-to-kilometer scale, with a particular emphasis on cold pools, wind gusts, and coherent patterns in the planetary boundary layer during summer. A unique feature was the distribution of 150 self-developed and low-cost instruments. More specifically, FESSTVaL included dense networks of 80 autonomous cold pool loggers, 19 weather stations, and 83 soil sensor systems, all installed in a rural region of 15-km radius in eastern Germany, as well as self-developed weather stations handed out to citizens. Boundary layer and upper-air observations were provided by eight Doppler lidars and four microwave radiometers distributed at three supersites; water vapor and temperature were also measured by advanced lidar systems and an infrared spectrometer; and rain was observed by a X-band radar. An uncrewed aircraft, multicopters, and a small radiometer network carried out additional measurements during a 4-week period. In this paper, we present FESSTVaL's measurement strategy and show first observational results including unprecedented highly resolved spatiotemporal cold-pool structures, both in the horizontal as well as in the vertical dimension, associated with overpassing convective systems. [ABSTRACT FROM AUTHOR]

The Cyclone Global Navigation Satellite System (CYGNSS) mission has generated several new ocean surface data products. Because of its high overpass rate and ability to measure surface wind speeds through weather, these data products are typically higher temporal resolution than traditional satellite tropical cyclone (TC) data products. However, the nature of the Global Navigation Satellite Systems reflectometry (GNSS-R) signal, which is essentially a single pixelwide measurement along the CYGNSS specular point (SP) track on the ground, necessitates aggregating the wind speed data over a period of time to accurately characterize TCs in terms of intensity and structure. The standard CYGNSS level 3 (L3) wind products are averaged over 1 h, which typically is not sufficient to produce an accurate characterization. A new L3 storm-centric gridded (SCG) wind speed product is presented here. It has been developed to improve upon the standard L3 algorithm for the purpose of providing better characterization of TC wind fields over their storm life cycle. This paper describes the L3 SCG algorithm, provides examples of L3 SCG wind fields, and discusses the potential uses and limitations of the new data product. [ABSTRACT FROM AUTHOR]

Aerosol properties are fundamentally different near clouds than away from clouds. This paper reviews the current state of knowledge of aerosol properties in the near-low-cloud environment and quantitatively compares them with aerosols far from clouds, according to remote sensing observations. It interprets observations of aerosol properties from different sensors using satellite, aircraft, and ground-based observations. The correlation (and anticorrelation) between proximity to cloud and aerosol properties is discussed. Retrieval artifacts in the near-cloud environment are demonstrated and quantified for different sensor attributes and environmental conditions. Finally, the paper describes the possible corrections for near-cloud enhancement in remote sensing retrievals. This study is timely in view of science definition studies for NASA's Aerosol, Cloud, Convection and Precipitation (ACCP) mission, which will also seek to directly link aerosol properties to nearby clouds. [ABSTRACT FROM AUTHOR]

A hyperspectral infrared (IR) sounder from geostationary orbit provides nearly continuous measurements of atmospheric thermodynamic and dynamic information within a weather cube, specifically the atmospheric temperature, moisture, and wind information at different pressure levels that are critical for improving high-impact weather (HIW) nowcasting and numerical weather prediction (NWP). Geostationary hyperspectral IR sounders (GeoHIS) have been on board China's Fengyun-4 series since 2016 and will be on board Europe's Meteosat Third Generation (MTG) series in the 2024 time frame; the United States and other countries are also planning to include GeoHIS instruments on their next generation of geostationary weather satellites. Although availability of on-orbit GeoHIS data are limited currently, studies have been conducted and progress has been made on developing the applications of high-temporal-resolution GeoHIS observations. These include but are not limited to deriving three-dimensional wind fields for nowcasting and NWP applications, trending atmospheric instability for warning in preconvective environments, conducting impact studies with data from the experimental Geostationary Interferometric Infrared Sounder (GIIRS) on board Fengyun-4A, preparing observing system simulation experiments (OSSEs), and monitoring diurnal variation of atmospheric composition. This paper provides an overview of the current applications of GeoHIS, discusses the data processing challenges, and provides perspectives on future development. The purpose is to provide direction on utilization of the current and assist preparation for the upcoming GeoHIS observations for nowcasting, NWP and other applications. [ABSTRACT FROM AUTHOR]

This paper describes a new Passive Microwave Empirical Cold Surface Classification Algorithm (PESCA) developed for snow-cover detection and characterization by using passive microwave satellite measurements. The main goal of PESCA is to support the retrieval of falling snow, since several studies have highlighted the influence of snow-cover radiative properties on the falling-snow passive microwave signature. The developed method is based on the exploitation of the lower-frequency channels (<90 GHz), common to most microwave radiometers. The method applied to the conically scanning Global Precipitation Measurement (GPM) Microwave Imager (GMI) and the cross-track-scanning Advanced Technology Microwave Sounder (ATMS) is described in this paper. PESCA is based on a decision tree developed using an empirical method and verified using the AutoSnow product built from satellite measurements. The algorithm performance appears to be robust both for sensors in dry conditions (total precipitable water < 10 mm) and for mean surface elevation < 2500 m, independent of the cloud cover. The algorithm shows very good performance for cold temperatures (2-m temperature below 270 K) with a rapid decrease of the detection capabilities between 270 and 280 K, where 280 K is assumed as the maximum temperature limit for PESCA (overall detection statistics: probability of detection is 0.98 for ATMS and 0.92 for GMI, false alarm ratio is 0.01 for ATMS and 0.08 for GMI, and Heidke skill score is 0.72 for ATMS and 0.69 for GMI). Some inconsistencies found between the snow categories identified with the two radiometers are related to their different viewing geometries, spatial resolution, and temporal sampling. The spectral signatures of the different snow classes also appear to be different at high frequency (>90 GHz), indicating potential impact for snowfall retrieval. This method can be applied to other conically scanning and cross-track-scanning radiometers, including the future operational EUMETSAT Polar System Second Generation (EPS-SG) mission microwave radiometers. [ABSTRACT FROM AUTHOR]

The Joint Typhoon Warning Center (JTWC) utilized new space-based environmental monitoring (SBEM) data alongside traditional data to adjust JTWC tropical cyclone (TC) intensity and structure estimates during production of the official 2019 Best Track dataset. Intensity estimates from multiple platforms such as Advanced Microwave Scanning Radiometer-2 (AMSR2), the Soil Moisture Active Passive (SMAP) and Soil Moisture and Ocean Salinity (SMOS) radiometers, and synthetic aperture radar (SAR), along with objective Dvorak and satellite consensus algorithms, not only aided the poststorm best track (BT) process, but also provided robust data that supported real-time analysis and forecasting. This summary attempts to communicate with the TC community the extent to which these new data affected the 2019 official BT data, how JTWC utilized these new data in the poststorm BT process, and provide examples of how these data influenced forecaster decision-making in real time. This paper makes no attempt to validate the accuracy of the wind speed estimates from these methods (SAR, SMAP/SMOS, or AMSR2) and does not outline the entirety of the JTWC process for determining TC intensity, but it does outline, briefly, the impact of these new datasets on the final JTWC BT intensity estimates and on real-time analysis. These methodologies are valuable sources of cyclone intensity estimates in an otherwise data-sparse area of responsibility, and in many cases provide critical data not captured by traditional methods alone, which are detailed further in this summary. [ABSTRACT FROM AUTHOR]

Two spaceborne radars currently in orbit enable the sampling of snowfall near the surface and throughout the atmospheric column, namely, CloudSat's Cloud Profiling Radar (CPR) and the Global Precipitation Measurement mission's Dual-Frequency Precipitation Radar (GPM-DPR). In this paper, a direct comparison of the CPR's 2C-SNOW-PROFILE (2CSP), the operational GPM-DPR algorithm (2ADPR) and a neural network (NN) retrieval applied to the GPM-DPR data is performed using coincident observations between both radars. Examination of over 3500 profiles within moderate to strong precipitation (Ka band ≥ 18 dBZ) show that the NN retrieval provides the closest retrieval of liquid equivalent precipitation rate R immediately above the melting level to the R retrieved just below the melting layer, agreeing within 5%. Meanwhile, 2CSP retrieves a maximum value of R at −15°C, decreases by 35% just above the melting layer, and is about 50% smaller than the GPM-DPR retrieved R below the melting layer. CPR-measured reflectivity shows median reduction of 2–3 dB from −15° to −2.5°C, likely the reason for the 2CSP retrieval reduction of R. Two case studies from NASA field campaigns [i.e., Olympic Mountains Experiment (OLYMPEX) and Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS)] provide analogs to the type of precipitating systems found in the comparison between retrieval products. For the snowfall events that GPM-DPR can observe, this work suggests that the 2CSP retrieval is likely underestimating the unattenuated reflectivity, resulting in a potential negative, or low, bias in R. Future work should investigate how frequently the underestimated reflectivity profiles occur within the CPR record and quantify its potential effects on global snowfall accumulation estimation. [ABSTRACT FROM AUTHOR]

The catastrophic derecho that occurred on 10 August 2020 across the midwestern United States caused billions of dollars of damage to both urban and rural infrastructure as well as agricultural crops, most notably across the state of Iowa. This paper documents the complex evolution of the derecho through the use of low-Earth-orbit passive-microwave imager and GOES-16 satellite-derived products complemented by products derived from NEXRAD weather radar observations. Additional satellite sensors including optical imagers and synthetic aperture radar (SAR) were used to observe impacts to the power grid and agriculture in Iowa. SAR improved the identification and quantification of damaged corn and soybeans, as compared to true-color composites and normalized difference vegetation index (NDVI). A statistical approach to identify damaged corn and soybean crops from SAR was created with estimates of 1.97 million acres of damaged corn and 1.40 million acres of damaged soybeans in the state of Iowa. The damage estimates generated by this study were comparable to estimates produced by others after the derecho, including two commercial agricultural companies. [ABSTRACT FROM AUTHOR]

A 30-yr time series (4 February 1990–4 February 2020) of aerosol optical depth (AOD) of the atmosphere, total precipitable water (TPW), and total column ozone has been conducted in central Texas using simple, highly stable instruments. All three parameters in this ongoing measurement series exhibited robust annual cycles. They also responded to many atmospheric events, including the historic volcanic eruption of Mount Pinatubo (1991), a record El Niño (1998), an unprecedented biomass smoke event (1998), and La Niña that caused the driest drought in recorded Texas history (2011). Reduced air pollution caused mean AOD to decline from 0.175 to 0.14. The AOD trend measured for 30 years by a light-emitting diode (LED) sun photometer, the first of its kind, parallels the trend from 20 years of measurements by a modified Microtops II. While TPW responded to El Niño–Southern Oscillation conditions, TPW exhibited no trend over the 30 years. The TPW data compare favorably with 4.5 years of simultaneous measurements by a nearby NOAA GPS (r2 = 0.78). The 30 years of ozone measurements compare favorably with those from a series of NASA ozone satellites (r2 = 0.78). In 2016, 194 comparisons of Microtops II and world standard ozone instrument Dobson 83 at the Mauna Loa Observatory agreed within 1.9% (r2 = 0.81). The paper concludes by observing that students and citizen scientists can collect scientifically useful atmospheric data with simple sun photometers that use one or more LEDs as spectrally selective photodiodes. [ABSTRACT FROM AUTHOR]

Simsphere, a soil–vegetation–atmosphere–transfer (SVAT) model developed at The Pennsylvania State University, can be downloaded from the web for use by students and researchers. In existence for several decades, Simsphere has figured in both the classroom and in research at several universities. As such, Simsphere has been supported by a knowledgeable group of academic users and has been applied in a variety of applications, such as in remote sensing of surface soil water content and in the assessment of water and ozone stresses on plants. This paper describes the model and how it can be downloaded and run. [ABSTRACT FROM AUTHOR]

Vertical profiles of atmospheric temperature, moisture, wind, and aerosols are essential information for weather monitoring and prediction. Their availability, however, is limited in space and time because of the significant resources required to observe them. To fill this gap, the New York State Mesonet (NYSM) Profiler Network has been deployed as a national testbed to facilitate the research, development, and evaluation of ground-based profiling technologies and applications. The testbed comprises 17 profiler stations across the state, forming a long-term regional observational network. Each profiler station comprises a ground-based Doppler lidar, a microwave radiometer (MWR), and an environmental Sky Imager--Radiometer (eSIR). Thermodynamic profiles (temperature and humidity) from the MWR, wind and aerosol profiles from the Doppler lidar, and solar radiance and optical depth parameters from the eSIR are collected, processed, disseminated, and archived every 10 min. This paper introduces the NYSM Profiler Network and reviews the network design and siting, instrumentation, network operations and maintenance, data and products, and some example applications that highlight the benefits of the network. Some sample applications include improved situational awareness and monitoring of the sea--land breeze, long-range wildfire smoke transport, air quality (PM2.5 and aerosol optical depth) and boundary layer height. Ground-based profiling systems promise a path forward for filling a critical gap in the U.S. observing system with the potential to improve analysis and prediction for many weather-sensitive sectors, such as aviation, ground transportation, health, and wind energy. [ABSTRACT FROM AUTHOR]

We present an updated cloud regime (CR) dataset based on Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 6.1 cloud products, specifically, joint histograms that partition cloud fraction within distinct combinations of cloud-top pressure and cloud optical thickness ranges. The paper focuses on an edition of the CR dataset derived from our own aggregation of MODIS pixel-level cloud retrievals on an equal-area grid and prespecified 3-h UTC intervals that spatiotemporally match International Satellite Cloud Climatology Project (ISCCP) gridded cloud data. The other edition comes from the 1° daily aggregation provided by standard MODIS Level-3 data, as in previous versions of the MODIS CRs, for easier use with datasets mapped on equal-angle grids. Both editions consist of 11 clusters whose centroids are nearly identical. We provide a physical interpretation of the new CRs and aspects of their climatology that have not been previously examined, such as seasonal and interannual variability of CR frequency of occurrence. We also examine the makeup and precipitation properties of the CRs assisted by independent datasets originating from active observations and provide a first glimpse of how MODIS CRs relate to clouds as seen by ISCCP. SIGNIFICANCE STATEMENT: We present an updated 17-yr dataset of global cloudiness classification from the space-based MODIS instrument. This dataset exhibits similar consistency with the cloud and precipitation characteristics seen by active observations in the previous version, but its greater length allows an initial analysis of trends of cloud systems with distinct physical properties and geographical characteristics. Furthermore, custom tailoring to spatiotemporally match the ISCCP dataset enables systematic comparisons with that seminal description of cloud climatological characteristics. [ABSTRACT FROM AUTHOR]