Search

The high integration density of microelectronic devices leads to local heat accumulation, and effective heat dissipation and signal transmission of packaging materials have become the primary issues to be solved. However, existing polymer materials have difficulty meeting the requirements due to their unsatisfactory thermal conductivity and thermal expansion properties. In this work, we proposed the use of digital light processing (DLP) printing technology to construct a triply periodic minimum surface (TPMS) skeleton, and a continuous and efficient heat conduction path was successfully constructed in epoxy resin by impregnating h-BN on the skeleton surface. When the loading of h-BN was 20 vol%, the thermal conductivity of the TPMS(SiO 2)@BN/EP(BN) composites was 1.86 W/(m·K), which was 786 % higher than that of pure epoxy resin. In addition, the thermal expansion coefficient of the composites decreased by more than 70 %. At the test frequencies of 3∼10 MHz, the composites showed stable dielectric properties, and the dielectric constant was always maintained in a low range, between 3.85 and 4.15. This work has realized the transformation of the method for constructing a heat conduction path from disordered to ordered and from random to repeatable. This provides a new strategy for the selection of microelectronic packaging materials. [ABSTRACT FROM AUTHOR]

Mercury emission from industrial wastewater has a great impact on the aquatic environment but is not well studied. Inventory analysis, decoupling and decomposition methods have been conducted based on the China Pollution Source Census dataset, which combines industry removal efficiencies to calculate mercury emissions from industrial wastewater in 340 cities in China during 2000–2010. The results show that over these 11 years, total mercury emissions and per capita mercury emissions increased by approximately 5 times, while the emission intensity increased by only about 3%. From 2000 to 2010, only 0.59% of cities showed strong decoupling between economic growth and mercury emissions, and 37.65% of cities showed weak decoupling, whereas 38.82% of cities showed negative decoupling. We attribute the decoupling of economic development and emissions in individual cities to several socioeconomic factors and find that a decline in emission intensity is the main driver. The Gini coefficient indicates a significant imbalance between cities' emissions, but this situation improved during 2000–2010. The objective of this article is to provide a historical perspective on the situation of mercury emissions from wastewater in China, thereby contributing' to the broader understanding of industrial pollution. [Display omitted] • Wastewater mercury emissions in Chinese cities were calculated from 2000 to 2010. • Only 4.41% of Chinese cities achieved a decoupling of GDP from mercury emissions. • The decline in emission intensity is vital to achieving decoupling. • There is a significant imbalance between cities' emissions. [ABSTRACT FROM AUTHOR]

A Cu-coated Al 2 O 3 substrates which can be used for power modules are prepared via sintering and reduction of CuO–SiO 2 film onto the surface of Al 2 O 3 ceramic without precious metal brazing filler or high-vacuum equipment. This method has a significant cost advantage over the existing technology. Effects of oxygen partial pressure from sintering atmosphere and SiO 2 content on microstructure and mechanical properties of Cu/Al 2 O 3 interface are systematically investigated. Phase compositions and morphologies of sintered Cu 2 O layer, reduced Cu layer and reactive layer are characterized via X-ray diffraction and scanning electron microscopy. In addition, physicochemical changes within CuO–SiO 2 during sintering are characterized by thermogravimetry-differential scanning calorimeter. It is found that oxygen and SiO 2 can promote the generation of Cu 2 O–CuO–SiO 2 eutectic phase with low melting point upon sintering, which increases the thickness of reaction layer and the densification of Cu layer. The shear strength between the Cu layer and the Al 2 O 3 substrate is enhanced with the increase in Cu layer densification degree, while varying in irregular manner with the thickness of reaction layer. In particular, the highest shear strength of 62.70 MPa is obtained at oxygen partial pressure of 0.02 atm and SiO 2 content of 1.5 wt%. [ABSTRACT FROM AUTHOR]

Regeneration serves as a self-protective mechanism that allows a tissue or organ to recover its entire form and function after suffering damage. However, the regenerative capacity varies greatly within the plant kingdom. Primitive plants frequently display an amazing regenerative ability as they have developed a complex system and strategy for long-term survival under extreme stress conditions. The regenerative ability of dicot species is highly variable, but that of monocots often exhibits extreme recalcitrance to tissue replenishment. Recent studies have revealed key factors and signals that affect cell fate during plant regeneration, some of which are conserved among the plant lineage. Among these, several members of the ETHYLENE RESPONSE FACTOR (ERF) transcription factors have been implicated in wound signaling, playing crucial roles in the regenerative mechanisms after different types of wounding. An understanding of plant regeneration may ultimately lead to an increased regenerative potential of recalcitrant species, producing more high-yielding, multi-resistant and environmentally friendly crops and ensuring the long-term development of global agriculture. [ABSTRACT FROM AUTHOR]

Zebrafish Fish-egg lectin (zFEL) has been identified and proved to be a maternal factor with antibacterial and opsonic ability in fishes. In this study, we found that zFEL was capable of enhancing the phagocytosis of the bacteria by macrophages of mouse (RAW264.7 and mouse peritoneal macrophages), suggesting a cross-species function of zFEL in higher animals. Further studies showed that zFEL can active the antigen presentation ability by up-regulating the expression of CD80, CD86 and MHC II. Meanwhile, zFEL also promoted the polarization of macrophages to M1-type, which was confirmed by the increase of cytokines TNF-α and IL-6. The expression of p38 gene was up-regulated in macrophages preincubated with zFEL. Taken together, zFEL appears opsonic function in mammal macrophages and has potential application in immunomodulation. • Cross-species opsonic activity is found by zebrafish fish-egg lectin (zFEL) on mouse macrophages. • zFEL can up-regulate the expression of CD80, CD86 and MHC II on macrophages. • zFEL promotes the polarization of macrophages to M1-type. [ABSTRACT FROM AUTHOR]