Search

• The UPM and PI iterative methods can accurately reconstruct the residual stress field induced by rolling processing. • The extended finite element method and the weight function method are applied to solve the stress intensity factor. • The necessity of deep rolling treatment for axles is verified. • The influence of interference and initial crack position on the remaining life of axle is explored. • The damage tolerance analysis of the axle was carried out. Deep rolling surface strengthening is an effective way to introduce compressive residual stress (CRS) along the railway axle, which can improve the fatigue resistance of the material. The CRS field was rebuilt adopting the proportional-integral (PI) iteration method and the unit pressure method (UPM) to study the fatigue cracking behavior of deep-rolled EA4T railway axles. The remaining life prediction model and the stress intensity factor (SIF) solution method were then validated using simulations and testing with small-sized specimens. The remaining life of the EA4T railway axle was then calculated by applying a realistic vertical load spectrum. The results showed that CRS prevented crack propagation, enhanced the critical propagation size of railway axle cracks, and prolonged the remaining life of the axle. Additionally, the remaining life of the axle may not support the following maintenance period if a crack with an extendable size emerges at the unloading groove of the railway axle. This work provides a theoretical basis for the optimization of the non-destructive testing (NDT) interval of deep-rolled EA4T railway axles. [ABSTRACT FROM AUTHOR]

• Effects of the corrosive environment on the fatigue strength of EA4T axle steel are explored. • The evolution of corrosion process during fatigue loading is fully investigated. • Crack aspect ratio in the corrosive environment is obtained by using synchrotron radiation X-ray computed microtomography (SR-μCT). • Fatigue life prediction model is developed based on the pit growth, short crack growth, and long crack growth stages. High-speed railway axle is the critical safety component of modern ground vehicles, which experiences extremely complex environments. In this paper, the effect of corrosion on the fatigue behavior of EA4T axle steel was investigated in an artificial rainwater environment. Combining scanning electron microscopy (SEM) and synchrotron radiation X-ray micro computed microtomography (SR-μCT) with theoretical analysis, damage measurement enabled a full evolution characterization of the corrosion process for exploring the corrosion mechanism and its influence on the fatigue life. It is found that the corrosive environment significantly reduced fatigue strength and facilitated multiple crack initiation, while showed relatively little effect on the long fatigue crack growth. The fitness of the 3-P Weibull distribution was slightly higher than that of the Gumbel distribution in terms of crack population. The life prediction model incorporating the pit growth, short crack, and long crack stages showed a good agreement within the 95% and 5% probabilistic S-N curve. [ABSTRACT FROM AUTHOR]

• Fatigue tests are conducted for small specimen and press-fitted axle with defect. • Press-fitted axles exhibit notably lower fatigue strength than small specimens. • Goodman relation is used to consider mean tensile stress induced by press-fitting. • The error of predicted notch fatigue strength is controlled to less than 11%. In order to evaluate the notch fatigue strength of transition groove in railway axle, a series of fatigue tests were conducted on small specimens and press-fitted axles containing surface defects. Based on the experimental and finite element (FE) analyses, a novel method considering mean stress effect was proposed to evaluate the fatigue strength of scale railway axle with surface defect. It is found that press-fitted axles exhibit significantly lower notch fatigue strength than small specimens. Furthermore, the theory of critical distance (TCD) provides a good correlation between the notch fatigue strength of small specimens and experimental results. FE analyses revealed that the press-fitting reduces the fatigue strength of the transition groove through increasing stress concentration and introducing a mean tensile stress that decreases with an increase in the applied loading. To account for the mean stress effect, the axial stress at the groove is corrected as an equivalent stress amplitude at R = -1 based on Goodman relation. Through the combination of TCD and Goodman relation, an estimated fatigue strength with an error of less than 11 % can be achieved for the scale railway axle with surface defect. [ABSTRACT FROM AUTHOR]