Search

Because of its potential benefits in lowering process energy consumption, freezing desalination as a seawater desalination method has attracted a lot of attention. However, significant mass loss caused by extensive washing is a fundamental problem preventing the development of freezing desalination technologies. For freezing desalination technology to be widely adopted, the washing process must be eliminated. In this study, a fluid-layer-based method for separating ice is introduced. The density differences between the generated ice and the silicon oil intermediate fluid layer facilitate the separation of the product water without the need of conventional crushing or washing processes. The aim of this work is to study the feasibility and applicability of using silicon oil as an intermediary fluid layer in ice separation during the freezing desalination process. The outcomes show promise for a feasible freezing desalination technique utilizing silicon oil as an intermediate separation layer. It was also observed that as feed salinity decreases, the desalination rate increases. For instance, the distillation rate is 50.89 % and 67.3 % at an initial feed salinity equal 45,000 and 10,000 ppm, respectively. Overall, the initial feed salinity and COP are found to have an impact on specific energy usage. • Intermediate fluid layer for ice separation • Silicon oil for ice production in freezing desalination • Specific energy consumption is affected by initial salinity and COP. • Specific energy consumption 57.412 kWh/m3 [ABSTRACT FROM AUTHOR]