Search

The Divertor Tokamak Test (DTT) is a new, super-conducting device, being constructed in Frascati, Italy. DTT will be capable of plasma operations at high density and high heating power, in conditions relevant to address the power exhaust issue in support of ITER operation and DEMO design. DTT foresees the installation of a mix of auxiliary heating systems to couple up to 45 MW to the plasma, including Neutral Beam Injection (NBI). The neutral beam injector is currently being designed, aiming at delivering tangentially to the plasma neutral particles at energy of 510 keV, with a total power of ∼10 MW. In the present work, we apply for the first time the orbit-following Monte Carlo code ASCOT to DTT, in order to analyse with more details the interaction of the high-energy beam, described in real geometry beamlet by beamlet, and the plasma. The results of the simulation give an insight of the behaviour of beam energetic particles in DTT. Thanks to the flexibility of DTT, different plasmas can be generated, e.g. in terms of plasma shape due to different divertor concepts. We present the comparison of two cases with different plasma vertical positions and we analyse the effect on beam absorption in the plasma. We then present a sensitivity scan on plasma density, to verify the coupling of beam power at densities lower than the reference target scenario. These investigations are crucial to provide feedback and suggestions to DTT design and to assess the beam fast ion physics for plasma scenario developments. [ABSTRACT FROM AUTHOR]

To reach fusion conditions and control the plasma configuration in ITER, the next step in tokamak fusion research, two neutral beam injectors (NBIs) will supply 16.5 MW each, by neutralizing accelerated negative hydrogen or deuterium ions. The requirements of ITER NBIs (40A/1 MeV D- ions for ≤1 h, 46A/870 keV H- ions for ≤1000 s) have never been simultaneously attained. So in the Neutral Beam Test Facility (NBTF, Consorzio RFX, Italy) the operation of the full-scale ITER NBI prototype (MITICA) will be tested and optimised up to full performances, focussing on accelerator (including voltage holding), beam optics, neutralisation, residual ion removal. The NBTF includes also the full-scale prototype of the ITER NBI source with 100 keV particle energy (SPIDER), for early investigation of: negative ion production and extraction, source uniformity, negative ion current density and beam optics. This paper will describe the main results of the first two years of SPIDER operation, devoted to characterizing plasma and beam parameters, including investigation of RF-plasma coupling efficiency and magnetic filter field effectiveness in reducing co-extracted electrons. SPIDER is progressing towards the first caesium injection, which aims at increasing the negative ion density. A major shutdown, planned for 2021, to solve the issues identified during the operation and to carry out programmed modifications, will be outlined. The installation of each MITICA power supply and auxiliary system is completed; in-vessel mechanical components are under procurement by Fusion for Energy (F4E). Integration, commissioning and test of the power supplies, procured by F4E and QST, as the Japanese Domestic Agency (JADA), will be presented. In particular, 1.0MV insulating tests were carried out step-by-step and successfully completed. In 2020 integrated tests of the power supplies on the accelerator dummy load started, including the assessment of their resilience to accelerator grid breakdowns using a short-circuit device located in vacuum. The aggressive programme, to validate the NBI design at NBTF and to meet ITER schedule (requiring NBIs in operation in 2032), will be outlined. Unfortunately, in 2020 the coronavirus disease infection affected the NBTF activities. A solution to proceed with integrated power tests despite the coronavirus is presented. [ABSTRACT FROM AUTHOR]