Search

• Compared with the traditional flexible interconnection method, the EDC-DN power supply architecture proposed in this paper does not simply use MTDC to achieve feeder interconnection but first optimizes and adds dynamic reactive power compensation devices based on voltage source converters in the context of a high percentage of DG access to the grid, and then the dynamic reactive power compensation equipment between different feeders is interconnected on the DC side by adding additional lines, thus weakening the voltage fluctuation of the grid when DG is connected while achieving closed-loop flexible interconnection between multiple feeders. This can achieve closed-loop flexible interconnection between multiple feeders while weakening the voltage fluctuation of the grid when DG is connected, provide a flexible active power adjustment path for high proportional DG access to DN, and realize power mutual aid between different feeders and network-level bearing of DG. • For the issue of power supply recovery after EDC-DN fault, a comprehensive analysis was conducted on the impact of different fault locations on the power supply recovery process. The collaborative plan between EDC and DAS was first proposed, clarifying the information interaction content between the distribution network automation central station, feeder sub-station, and EDC sub-station during the power supply recovery process. An EDC-DN two-stage power supply restoration architecture considering EDC continuous regulation, combinatorial optimization of interconnection switch and sectionalizing switch is proposed and designed, which fills the technical gap in the integration of EDC and DAS systems. • This paper demonstrates the real-time dynamics of EDC in the EDC-DN power supply restoration process through simulation. The restoration process includes a fast restoration phase based on EDC continuous regulation of power supply, a non-fault section transfer process based on mechanical switch action, and an economically optimal operation phase using an optimal combination of switches to reconfigure the distribution network topology. The current power supply restoration strategy of SOP focuses on the final restoration state of EDC continuous regulation and switch combination rather than on the whole process of power supply restoration. This paper considers the real-time dynamics of the entire EDC-DN power supply restoration process. It fills the technical gap in the current SOP power supply restoration without considering the intermediate process. The flexible interconnection device (FID) enables multiple distribution feeders in closed-loop mode to support a higher proportion of distributed generation (DG) and large-scale new loads connected to the distribution network (DN). Moreover, the closed-loop operation mode based on FIDs provides an effective technology roadmap for high-quality and highly reliable power users, especially the quick restoration of power supply after the failure of DN. This paper proposes a new supply shape in which the multi-terminal DC links are flexibly embedded in the AC DN (EDC-DN) to realize closed-loop operation, achieving lower investment costs than the existing mode that replaces tie switches with soft open points (SOPs). Meanwhile, a two-stage power supply quick recovery control technology is proposed for the EDC-DN, including the fast power supply recovery stage based on EDC and the optimizing restoration stage based on network reconfiguration. Firstly, the role of EDC in the process of power supply restoration of three different faults on AC feeder is analyzed. Secondly, a detailed power supply recovery process is proposed, which is based on a distribution automation system (DAS) and the real-time control capability of EDC. Thirdly, the power supply restoration second stage is implemented, which is based on network reconfiguration with switch combination and EDC continuous variable optimization. Finally, a 58-node DN with an EDC system was constructed using PSCAD/MTDC simulation software to verify the effectiveness of the two-stage strategy for EDC-DN power restoration. © 2017 Elsevier Inc. All rights reserved. [ABSTRACT FROM AUTHOR]

The objective of the present study is to assess the effect of the total solids (TS) content on the digestion performance, methanogenic pathways, and economic evaluation of anaerobic co-digestion with dairy manure and maize stover. The results showed that the cumulative methane yields decreased with increasing TS content, which was consistent with the maximum methane production rate and hydrolysis rate. The pH, alkalinity, soluble chemical oxygen demand, ammonium nitrogen, and volatile fatty acid content increased with increasing TS content. Analysis of the microbial community showed that the abundance of Methanosaeta decreased and Methanosarcina increased with increasing TS content, which led to the succession of the methanogenesis pathway from the acetoclastic pathway to the mixotrophic and hydrogenotrophic pathways. Results of the economic analysis indicated that the profitability of AD system increased with increasing TS content, resulting in more solid digestate being produced under the analysis conditions. [Display omitted] • TS content influences methane yield and volumetric methane productivity. • The succession from Methanosaeta to Methanosarcina with increasing TS content. • Increasing the TS content increases the net present value of anaerobic co-digestion. • The solid digestate determines the net present value of anaerobic co-digestion. • 14% TS is recommended for co-digestion with dairy manure and maize straw. [ABSTRACT FROM AUTHOR]

[Display omitted] • DOC was the foremost parameter influencing the phytotoxicity of LD. • Temperature accelerated the stability and phytotoxicity disappearance of LD. • Open storage of LD at 30 °C for 60 days and 20 °C for 90 days of LD was safe. • Hermetic storage of LD at 30 °C for 120 days and 20 °C for 150 days of LD was safe. • For storage at 10 °C for 180 days, additional post-treatment is required. Identifying the stability and phytotoxicity of liquid digestate (LD) is necessary for safe agricultural utilization. Storage temperature, method, and time are critical factors that affect the stability and phytotoxicity of LD. This study therefore aimed to explore the dynamics of stability, phytotoxicity, and microbial community of LD in cattle farms under different storage conditions. The results showed that the contents of solids, organic matter, nitrogen, and phosphorous decreased during storage and exhibited temperature dependency. Conversely, the seed germination index increased, which was negatively correlated with dissolved organic carbon and ammonium nitrogen and positively correlated with certain bacteria (Thermovirga and Fastidiosipila). Open storage and/or higher temperature were found to contribute to the stabilization efficiency and phytotoxicity disappearance of LD. Open storage of LD at 30 °C for 60 days and 20 °C for 90 days was safe for its agricultural utilization, while hermetic storage of LD at 30 °C for 120 days and 20 °C for 150 days was safe. However, for storage at 10 °C for 180 days, additional post-treatment is required. [ABSTRACT FROM AUTHOR]

• Introduce the chance constrained programming to deal with the randomness of wind power, photovoltaic output and load. • The fault recovery capability of flexible interconnected distribution network considering closed-loop operation is more fully developed. • Analyze the fault recovery effect of flexible interconnected distribution network under different SOP control modes and propose a two-stage recovery strategy. • Considering more complex faults of flexible interconnected distribution network, provide an effective fault recovery strategy for concurrent faults. With the continuous exploration of the application value of flexible interconnected distribution network, Soft Open Point (SOP) as its core device, how to fully explore the self-healing control support capability of SOP and improve its power supply reliability becomes particularly important. Aiming at the problem of fault recovery of flexible interconnected distribution network with multiple AC power supply areas, firstly, the topology of flexible interconnection of distribution network and the fault recovery model of SOP are described. Secondly, the stochastic nature of wind power, photovoltaic output and load is considered, and then the chance-constrained programming is introduced to deal with. Then, aiming at the coordinated operation of flexible closed-loop network in multiple AC power supply areas, and introducing the constraint on the acting number of switches, a stochastic optimization model of flexible interconnected distribution network fault recovery is established, and then the model is transformed into a deterministic mixed integer second-order cone programming model, which can be solved by CPLEX solver. Finally, the proposed model has been tested on a modified hand-in-hand IEEE33 system with dual-terminal SOP, verifying that the strategy proposed in this paper can effectively solve the fault recovery problem of flexible interconnected distribution network with multiple AC power supply areas considering uncertainty, and showing that this strategy can maximize the self-healing capability of distribution system. [ABSTRACT FROM AUTHOR]

[Display omitted] • • The novel reactor allows dry anaerobic digestion of food waste (FW) and straw. • • The methane yield of FW and straw co-digestion could reach 494.2 mL CH 4 /g VS. • • FW significantly improved the anaerobic biodegradability of the substrate (85.7%). • • Co-digestion can improve hydrolysis and acid production efficiency. • • The acetotrophic methanogenic pathway significantly affects the methane yield. Gradient anaerobic digestion reactor (GADR) can improve substrate utilization efficiency by solving the problem of the "short circuit" of materials. However, the substrate's composition significantly affects the reactor's performance. This study investigated the impact of food waste (FW) levels on corn straw's dry anaerobic digestion (AD) in a novel GADR. The results show that biomethane production can be improved by coupling urban and agricultural solid waste recycling. The mechanism is to increase the hydrolysis and acid production efficiency, and the abundance of enzymes related to methanogenesis. The maximum methane yield (494.2 mL CH 4 /g VS) and the highest anaerobic biodegradability (85.7 %) were obtained when the FW was added at 60 %. The co-digestion of FW and straw can improve the hydrolysis and acid production efficiency and methane yield, which improves the buffering capacity and stability of the system compared with the single digestion of FW. [ABSTRACT FROM AUTHOR]

[Display omitted] • Two-stage anaerobic digestion affects the hydrolysis-methanogenesis process. • Aerobic or micro-aerobic hydrolysis results in carbon loss from the substrate. • Substrate type significantly affected biogas yield and microbial community. • The gradient anaerobic digestion process (GADP) improved the biogas yield. • GADP enhanced carbon recovery of substrate and synergies of microorganisms. The destruction of the synergistic effect of the hydrolysis-methanogenesis process (HMP) of substrate may lead to the serious carbon loss of substrate and low biogas yield in traditional straw biogas engineering. In this study, the influence of substrate composition on anaerobic digestion (AD) was investigated under pilot conditions, and the relationship between HMP was further investigated under full-scale plants. The results showed that straw with a high content of soluble substances had the highest methane yield (264.25 L/kg VS) and degradation rate (59.32 %). At HRT = 20 d, the full-scale plant achieved the highest biogas yield (576.92 L/kg VS, 3.47 L/L/d) and degradation rate (67.50 %). Microbial analysis showed that substrate composition affected microbial community and methanogenic metabolic pathway. The analysis results of PICRUSt2 confirm that gradient AD guarantees the synergistic relationship of HMP. This study provides the theoretical basis and engineering guidance for improving the AD process in traditional straw biogas engineering. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ensiling EWS with acetic acid or heterofermentative LAB addition was first studied. • Ensiling EWS with additives enhanced acetic acid fermentation. • Ensiling EWS with additives preserved hemicellulose and cellulose content. • Ensiling EWS with additives changed the homo-fermentation to hetero-fermentation. • Ensiling EWS with additives improved the methane yield by 17.7–23.9%. Ensiling is an effective storage strategy for agricultural biomass, especially for energy crops (mainly energy grasses and maize). However, the ensiling of excessively wilted crop straw is limited due to material characteristics, such as a high lignocellulosic content and low water-soluble carbohydrate and moisture contents. In this study, acetic acid or hetero-fermentative lactic acid bacterial community (hetero-fermentative LAB) were employed as silage additives to improve the ensiling process of excessively wilted wheat straw (EWS). The results showed that the additives inhibited the growth of Enterobacteriaceae and Clostridium_sensu_stricto_12 , whose abundances decreased from 55.8% to 0.03–0.2%, respectively. The growth of Lactobacillus was accelerated, and the abundances increased from 1.3% to 80.1–98.4% during the ensiling process. Lactic acid fermentation was the dominant metabolic pathway in the no additive treatment. The additives increased acetic acid fermentation and preserved the hemicellulose and cellulose contents, increasing the methane yield by 17.7–23.9%. This study shows that ensiling with acetic acid or hetero-fermentative LAB is an effective preservation and storage strategy for efficient methane production from EWS. [ABSTRACT FROM AUTHOR]

Korshinsk peashrub branches (Korpb) are agroforestry byproducts that accumulate in millions of tons per year and need to be reasonably utilized. To maximate the utilization value of Korpb, an integrated process was proposed and conducted by using Korpb as the main substrate ingredient for Pleurotus tuoliensis cultivation and also performing anaerobic digestion (AD) of spent mushroom substrate (SMS) for biogas production. The results indicated that the cultivation substrate including Korpb could obtain higher mushroom yields than a conventional substrate, and AD of SMS added the value of Korpb. Preliminary calculation suggested that, for every t of P. tuoliensis production, 1.65 t Korpb was consumed and 314 m3 biogas was produced from corresponding amount of SMS, bringing a total economic profit of $906.1. In addition, this integrated strategy has positive ecological and social benefits. The maximization of Korpb value can not only promote the biological conversion of Korpb to circle economy, but also be beneficial for the development of environment, energy conservation and edible fungus industry. • Korpb is a lignocellulose biomass resource with great potential. • Integration of P. tuoliensis cultivation and AD of SMS maximized the value of Korpb. • The economic profit achieved $906.1 for every t of P. tuoliensis production. • The integrated strategy has positive ecological and social benefits. [ABSTRACT FROM AUTHOR]

Temperature and hydraulic retention time (HRT) control are crucial for mitigating the "short-circuit" issue and enhancing methane production in continuous stirred-tank reactors. This study focuses on the combined effects of temperature and HRT on methanation via operating the reactors at different temperatures (35 °C, 45 °C, and 55 °C) and HRT (30, 25, and 20 d) for 116 days. The results demonstrated that the digester conducted at 45 °C and an HRT of 30 d unexpectedly yielded the maximum average methane production of 296.08 ml/g volatile solids (VS). In contrast, the optimal HRT for the 35 °C and 55 °C digesters were 25 and 30 d, with a methane yield of 241.88 ml/g VS and 240.9 ml/g VS, respectively. High-throughput sequencing shows that Firmicutes, Bacteroidetes, Themotogae, Chloroflexi, and Acidobacteria dominated 90–98 % of the total bacteria. Temperature exhibited a significant influence on shaping microbial ecosystems, indicating that temperature, rather than HRT, is the primary factor to consider. Additionally, metagenomic analysis reveals that the levels of genes involved in acetoclastic and hydrogenotrophic methanogenic pathways were enhanced at 45 °C, probably improving methane yield. These findings provide new insights into "short-circuit" mitigation and strategies to strengthen methane generation from biomass. • The digester at 45 °C exhibited a higher methane yield than those at 35 °C and 55 °C. • The optimal HRT for the 35 °C, 45 °C, and 55 °C digesters were 25, 30, and 30 d, respectively. • Temperature showed more influence on microbial regulation than HRT. • The enhanced acetoclastic methanogenesis path exhibited at 45 °C. [ABSTRACT FROM AUTHOR]

• High near-infrared reflectance thermochromic materials limits heat gain in winter. • UV absorber could alleviate light aging of thermochromic materials to some extent. • Relative position of ice-melting coating didn't affect functional fillers release. • Composite coating achieved 9 °C cooling effect and freezing temperature of −5 °C. • Skid and temperature change resistance of composite coating were investigated. As the main type of urban roads, the surface temperature of asphalt pavement can reach 70 °C in summer because high heat absorption, causing pavement disease and aggravating the heat island effect. Solar reflective coating is an effective way to tackle the problem in summer but may bring certain negative effects in winter. In this paper, a kind of composite coating containing thermochromic (TCM) materials and snow melting and ice suppression (SMIS) functional fillers was developed. The reflective properties, thermal behavior and road performance of the pavement coatings were investigated. The results showed that the optimal TiO 2 contents in TCM-black coating for pavement was 3 wt% to make full use of optical variation range. Long-term solar radiation destroyed the structure of thermochromic microcapsules and caused degradation of color and visible reflectance of TCM coatings, which could be alleviated by ultraviolet absorbers and light stabilizers. The optimal double-layer coating structure with TCM on the top and SMIS at the bottom could achieve cooling effect of 9 °C, pavement icing temperature of −5 °C and faster ice melting rate. The skid and temperature change resistance with the coatings also met requirements. This study provides a reference for developing novel pavement materials with balanced cooling effect and ice suppression capacity for mitigating heat island effect, improving driving safety, and ensuring the optimal service state and longer service life of pavement at the same time. [ABSTRACT FROM AUTHOR]

[Display omitted] • The Continuous stirred-tank reactor (CSTR) has a "short-circuit" problem. • The Gradient anaerobic digestion reactor (GADR) can solve the problem of CSTR. • GADR can stably carry out semi-continuous dry anaerobic digestion. • GADR can improve the biogas yield of straw raw materials that are unique to China. • The biogas production efficiency and microbial community were analyzed. In China, the problem of low biogas yield of traditional biogas projects has become increasingly prominent. This study investigated the effects of different hydraulic retention times (HRTs) on the biogas production efficiency and microbial community under pilot conditions. The results show that the "Gradient anaerobic digestion reactor" can stably carry out semi-continuous dry anaerobic digestion and improve biogas yield. The highest volatile solids (VS) biogas yield (413.73 L/kg VS and 221.61 L CH 4 /kg VS) and VS degradation rate (48.41%) were observed at an HRT of 25 days. When the HRT was 15 days, the volumetric biogas yield was the highest (2.73 L/L/d, 1.43 L CH 4 /L/d), but the VS biogas yield and degradation rate were significantly decreased. Microbial analysis showed that HRT significantly affected microbial community. It provides basic data support for the development of a new anaerobic digestion process and the practical application of the straw biogas project in China. [ABSTRACT FROM AUTHOR]

• The interval temperature digester exhibited the highest methane yield. • The decomposition rate of organic matter increases with increasing temperature. • Methanogenesis, rather than hydrolysis, is limited at the thermophilic temperature because of the loss of Methanosarcina. • Efficient methanogenesis occurs under the balance between hydrolysis and methanogenesis at interval temperature. • Our findings may provide insight into the temperature control in AD systems. Anaerobic digestion (AD) at mesophilic and thermophilic interval temperatures has received increasing attention due to an unexpectedly higher methane yield. However, there is no general consensus and the mechanisms of microbial regulation under interval temperature remain unclear. Therefore, this study evaluated the effect of conventional and interval temperatures on methanogenesis performance and microbial regulation in continuous AD of wilted corn straw. The results demonstrated that the hydrolysis rate increased with increasing temperatures, probably due to the predominant Firmicutes and Proteobacteria, whose abundance in D55 was more than 72% and 19%, respectively. However, in the stable period (31–55 d) experiments, digesters D35, D45, and D55 achieved an average methane yield of 224 ± 34, 311 ± 55, and 261 ± 49 N mL/g VS/d, respectively. Interval temperature substantially enhanced methane yield by 39.4% and 19.0% compared to that from mesophilic and thermophilic digesters, respectively. A higher proportion of Methanosarcina (94.42–94.73%) promoted the acetoclastic methanogenesis at interval temperature, implying that methanogenesis, rather than hydrolysis, is limited at the thermophilic temperatures because of the loss of Methanosarcina. Furthermore, a high abundance of essential genes involved in methane metabolism was found to stimulate methane production in the interval temperature digester. These findings revealed that the interval temperatures may be a balanced zone between hydrolysis and methanogenesis for achieving higher methane yield and provided a new perspective strategy for AD. [ABSTRACT FROM AUTHOR]

Adopting anaerobic digestion (AD) of lignocellulosic biomass to produce biomethane is an effective approach to meet the urgent demand for clean and sustainable energy in energy transition. The pretreatment kinetic mechanism is the key to enhance the lignocellulosic carbon conversion and significantly improve the efficiency of AD. Various pretreatment strategies have been proposed in the literature, while a systematical summarization of these strategies based on different driving forces is still lacking. The purpose of this review is to classify and analyze the current technologies and research achievements on lignocellulose pretreatment technologies according to different driving forces including single ones and combined ones. Features, as well as fundamental modes of conventional and recently emerged pretreatments, have been introduced. Single pretreatment methods driven by physical, chemical, or biological forces have obvious advantages and limitations for the anaerobic transformation of lignocellulosic feedstocks. Recently emerged combined pretreatment technologies powered by multiple forces have synergistic treatment effects which hold greater application potential than those driven by single forces. Besides, a comprehensive evaluation of combined pretreatments is carried out on the basis of pretreatment efficiency, cost, energy consumption, and environmental impact to detect their potential applications in the actual biogas industry. By comprehensively summarizing the current features of single and combined technologies, this review finally provides future research perspectives for biomass pretreatment. [Display omitted] • Features of different pretreatments driving by different forces were analyzed. • Conventional pretreatments driven by single forces have obvious shortcomings. • Rational integration of multiple driving forces has synergistic pretreatment effect. • Combined pretreatment strategies have greater potential than single ones. • Physical-chemical methods are most promising based on comprehensive evaluations. [ABSTRACT FROM AUTHOR]