Search

Purpose: This paper aims to suggest a parameter independent and simple speed estimator for primary field-oriented control of a promising electro-mechanical energy conversion device in the form of brushless doubly-fed reluctance machine (BDFRM) drive. Design/methodology/approach: The speed estimation algorithm, in this context, is formulated using a modified secondary winding active power (mPs)-based model reference adaptive system (MRAS). The performance of the proposed estimator is verified through computer aided MATLAB simulation study, compared with conventional active power-based MRAS and further supported with experimental validation using a 1.6 kW BDFRM prototype run by a dSPACE-1103 controller. Findings: The formulation of mPs-MRAS is insensitive to any machine parameters and does not involve any integration/differentiation terms. Thus, any deviation therein does not hinder the performance of the mPs-MRAS-based speed estimator. The proposed speed estimator shows stable behavior for variable speed-constant load torque operation in all the four quadrants. Originality/value: The formulation of mPs-MRAS is insensitive to any machine parameter and does not involve any integration/differentiation terms. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to present an adaptive method based on finite element analysis to calculate iron losses in switched reluctance motors (SRMs). Calculation of iron losses by analytical formulas has limited accuracy. On the other hand, its estimation in rotating electrical machines through fully dynamic simulations with a fine time-step is time-consuming. However, in the initial design process, a quick and sufficiently accurate method, i.e. a value close to that of iron losses, is always welcome. The method presented in this paper is a semi-analytical approach. The main problem is that iron losses depend on d B/d t. Therefore, the accuracy of the calculation of iron losses depends on the accuracy of the calculation of the first derivative of the flux density waveform. When adopting a magnetostatic model to estimate the iron losses, an important question arises: by how many magnetostatic simulations can the iron losses be estimated within the desired accuracy? In the proposed algorithm, the aim is not to accurately calculate the value of iron losses in SRMs. The objective is to find a numerical error criterion to calculate iron losses in SRMs with a minimum number of magnetostatic simulations. Design/methodology/approach: A finite element solver is developed by authors in MATLAB to solve the 2 D nonlinear magnetostatic problem using the Newton–Raphson method. A parametric program is developed to create geometry and mesh. The proposed method is implemented in MATLAB using the developed solver. Counterpart simulations are done in the ANSYS Maxwell software to validate the accuracy of the results generated by the developed solver. Findings: The performance of the proposed method is studied on a 12/8 (500 W) SRM. Three scenarios are studied. The first one is the calculation of iron losses by uniform refinement, and the second one is by adaptive refinement, and the last one is by adaptive refinement started by particular initial points (switching points). According to the results, the proposed method substantially reduces the number of magnetostatic simulations without sacrificing accuracy. Originality/value: The main novelty of this paper is introducing an error criterion to find the minimum number of magnetostatic simulations that are needed to calculate iron losses with the desired accuracy. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to analyze electromagnetic performance and develop an analytical approach to find the suitable coil combination and no-load flux linkage of the proposed hybrid excited consequent pole flux switching machine (HECPFSM) while minimizing the drive storage and computational time which is the main problem in finite element analysis (FEA) tools. Design/methodology/approach: First, a new HECPFSM based on conventional consequent pole flux switching permanent machine (FSPM) is proposed, and lumped parameter magnetic network model (LPMNM) is developed for the initial analysis like coil combination and no-load flux linkage. In LPMNM, all the parts of one-third machine are modeled which helps in reduction of drive storage, computational complexity and computational time without affecting the accuracy. Second, self and mutual inductance are calculated in the stator, and dq-axis inductance is calculated using park transformation in the rotor of the proposed machine. Furthermore, on-load performance analysis, like average torque, torque density and efficiency, is done by FEA. Findings: The developed LPMNM is validated by FEA via JMAG v. 19.1. The results obtained show good agreement with an accuracy of 96.89%. Practical implications: The proposed HECPFSM is developed for high-speed brushless AC applications like electric vehicle (EV)/hybrid electric vehicle (HEV). Originality/value: The proposed HECPFSM offers better flux regulation capability with enhanced electromagnetic performance as compared to conventional consequent pole FSPM. Moreover, the developed LPMNM reduces drive storage and computational time by modeling one-third of the machine. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to deal with the design optimization of a synchronous reluctance machine to be used in an X-ray tube, where the goal is to maximize the torque while keeping low the amount of material used, by means of gradient-based free-form shape optimization. Design/methodology/approach: The presented approach is based on the mathematical concept of shape derivatives and allows to obtain new motor designs without the need to introduce a geometric parametrization. This paper presents an extension of a standard gradient-based free-form shape optimization algorithm to the case of multiple objective functions by determining updates, which represent a descent of all involved criteria. Moreover, this paper illustrates a way to obtain an approximate Pareto front. Findings: The presented method allows to obtain optimal designs of arbitrary, non-parametric shape with very low computational cost. This paper validates the results by comparing them to a parametric geometry optimization in JMAG by means of a stochastic optimization algorithm. While the obtained designs are of similar shape, the computational time used by the gradient-based algorithm is in the order of minutes, compared to several hours taken by the stochastic optimization algorithm. Originality/value: This paper applies the presented gradient-based multi-objective optimization algorithm in the context of free-form shape optimization using the mathematical concept of shape derivatives. The authors obtain a set of Pareto-optimal designs, each of which is a shape that is not represented by a fixed set of parameters. To the best of the authors' knowledge, this approach to multi-objective free-form shape optimization is novel in the context of electric machines. [ABSTRACT FROM AUTHOR]

Purpose: High torque ripple is the significant challenge of the synchronous reluctance machine in household electric appliances, electric vehicles and so on. This paper aims to present an optimized design of a synchronous reluctance rotor structure to reduce the torque ripple with improving the average torque by the particle swarm optimization (PSO) algorithm. Design/methodology/approach: The optimization of rotor geometries has been investigated. Most of the rotor parameters such as the width of iron parts, the width of barriers along d and q axes and the endpoint angle of barriers are optimized by a new method using the PSO algorithm. After optimization, the resulted optimum design along with the initial design is simulated by two-dimensional finite element method and results are compared. At the end, a prototype is constructed and tested. Results of the experiment are compared with the simulation results where acceptable adoption is yielded. Findings: Minimizing the torque ripple without losing the average torque is an important achievement of the synchronous reluctance motor (SynRM) optimization; furthermore, the finite element analysis and experimental results indicate that the torque ripple of the SynRM with the optimized rotor is reduced significantly. Also, increasing the number of optimization parameters can effectively obtain an accurate shape of the SynRM barrier. Originality/value: Because of the high number of parameters in synchronous reluctance rotors, the majority of proposed optimizations did not use all geometric parameters of the rotor and tried to simplify the optimization by ignoring several optimization parameters or reducing the number of flux barriers. In this optimization, most of the rotor parameters have been used to achieve the precise barrier shape with the aim of reducing the torque ripple in SynRM. [ABSTRACT FROM AUTHOR]