Search

In this article, the experimental investigations on a 263-GHz gyrotron are presented. With the change of the operating magnetic field and the beam energy, the operating frequency is adjusted and the output power is also varied. It is found that when the operating magnetic field changes from 9.59 to 9.82 T at a fixed operating voltage of 20 kV and a beam current of 0.8 A, the operating frequency increases from 263.39 to 264.84 GHz, the frequency-tuning range is about 1.45 GHz, and the output power is from 26 to 463 W. When the operating voltage increases from 14.4 to 22.2 kV at a fixed operating magnetic field of 9.65 T, the operating frequency decreases from 263.68 to 263.40 GHz, the frequency-tuning range is 0.28 GHz, and the output power changes from 52 to 424 W. When the operating magnetic field is fixed at 9.65 T and the operating voltage is fixed at 20 kV, but the beam current increases from 120 to 880 mA, the output power increases from 21 to 277 W, the operating frequency increases from 263.396 to 263.425 GHz, and the frequency-tunable range is 0.029 GHz. The effects of the axial position of the gyrotron in the superconducting magnet system on the operating frequency, the frequency-tuning range, and the output power are also investigated experimentally. When the beam current is increased, the nonstationary phenomenon is observed. [ABSTRACT FROM AUTHOR]

As a terahertz (THz) radiation source, the frequency-tunable gyrotron is promising in application and attractive to researchers. In this article, the nonstationary phenomenon in a frequency-tunable gyrotron operating in different regimes—gyromonotron, transition, and gyro-backward-wave oscillator (BWO)—has been investigated in detail by 3-D particle in cell (PIC) simulation. Simulated results demonstrate that among the three regimes, gyromonotron has the strongest capability to keep stationary, and nonstationary oscillations are most likely to occur in the transition regime. Moreover, in the gyro-BWO regime, the capability of the system to maintain steady-state operation gets slightly improved with the increase in the axial mode. The corresponding interpretation is based on detuning frequency and feedback mechanism. Finally, the effect of the velocity spread on the nonstationary behavior has also been studied. Investigations reveal that the stability of stationary oscillations would be weakened when velocity spread is considered. The results in this article may be of benefit of a deeper insight into the nonstationary phenomenon in a frequency-tunable gyrotron. [ABSTRACT FROM AUTHOR]