Search

This article presents the calculation procedure of short circuits adopting the characteristic currents method (CCM). In a previous paper by the author G. Parise, the CCM has been upgraded with the introduction of “characteristic” countercurrents and the generalization of the Kirchhoff laws. For illustrating the calculation procedure, the selected case study deals with a low voltage cold ironing system where multiple ships are allowed to operate simultaneously on one shore power transformer and, so, a comparison has been developed between the IEC approach of the short-circuit calculation and the CCM. [ABSTRACT FROM AUTHOR]

This article presents a robust passivity-based control (PBC) strategy to mitigate the instability effect of the dc–dc boost power converter supplying a constant power load and a constant voltage load in dc microgrid systems. The control robustness of the PBC against both line and load variation is significantly improved by adding the nonlinear disturbance observer (NDO). Using the disturbance estimation technique, this observer works in parallel with the PBC strategy to compensate the disturbances of the system through a feed-forward compensation channel. Based on the dissipation property, the PBC strategy ensures the system stability, whereas the NDO guarantees global trajectory tracking to the reference voltage during disturbances. This control strategy not only ensures large-signal stability of the system, but also provides a fastest recovery performance during disturbances of the system as compared with other PBC strategies. The hardware-in-loop and real-hardware experimental results are provided to verify the control robustness of the proposed control strategy. [ABSTRACT FROM AUTHOR]

In recent years, due to the large spread of power electronics converters onboard shipboard power systems (SPSs), harmonic contamination became an inherent problem. Moreover, as the SPSs are mostly operating in an islanded mode with a limited rating of the generators that feed heavy variable loads, voltage stability issues became a challenge as well. To address these issues, implementing PWM-based FACTS devices using IGBTs such as the active power filters may not be very practical for high-power SPSs due to their limited rated powers, high implementation cost, and high losses. The passive power filters (PPFs) and fixed capacitor–thyristor controlled reactors (FC-TCR) can be effective alternatives due to their capability to operate in high-power applications, smaller losses and, lower cost. The aim of this article is to provide more in-depth analytical investigations to evaluate and compare the behavior of the PPFs and the FC-TCR compensator in reducing the harmonics and enhancing the voltage stability concurrently of high-power SPSs. In addition, details of the voltage stability concept are addressed to visualize the potential risk of the voltage collapse. Besides, the modeling of the FC-TCR and design of the closed-loop control algorithm to ensure voltage stability is conducted. Via intensive simulation studies of a practical ship, which are carried out in MATLAB/Simulink environment, it has been demonstrated that the FC-TCR based on the proposed design can enhance the power quality and voltage stability of SPSs better than traditional PPFs filters. [ABSTRACT FROM AUTHOR]