Search

In this article, the soft-switching technique is an important way to achieve high frequency and high conversion efficiency for transformerless grid-connected inverters (TLIs) with distributed photovoltaic generation. Meanwhile, new technical standards require TLIs to have a wider power factor operation range to support grid voltage, which means that there are positive power regions and negative power regions in a grid period. In order to fulfill soft-switching for high-frequency working switches during all power regions, a pair of zero-voltage-transition (ZVT) resonant cells with different capacitor connections are first derived in this article, and two equivalent two-quadrant resonance networks are originated by using the pair of ZVT resonant cells alternatively. Furthermore, defined connection points of the obtained two-quadrant resonance networks in TLIs are explored, and a guideline to invent new ZVT-TLIs is summarized. As a result, two families of ZVT-TLIs with full power factor range (ZVT-TLIs-FPF) are obtained. In order further to verify the correctness of the proposed guideline, the obtained ZVT-HERIC-FPF is taken as an example to analyze its operation principle. Finally, experimental results from a 1 kW prototype at 100 kHz are provided to verify the effectiveness of the proposed structuring method. [ABSTRACT FROM AUTHOR]

The grid inverters play an important role in renewable energy systems, transferring the dc power to the ac grid. Galvanic isolation is usually needed between the dc source and the grid due to safety reasons and grounding leakage current mitigation. In this article, a soft-switching isolated grid inverter is proposed based on the current-fed matrix-type configuration. The topology of this converter is composed of a current-fed H-bridge on the side of dc source and a direct matrix converter on the grid side, which are linked by a high-frequency transformer. The current-fed H-bridge on the primary-side can smooth the dc-source current and control the dc-source current directly. The avoidance of dc-link energy-storage element in the single-stage matrix converter can prolong the system's life. A space-vector-modulation-based soft-switching scheme is proposed for the matrix converter on the grid side and a model-based commutation method is adopted in the current-fed H-bridge on the dc side. With the proposed modulation methods, the soft switching can be realized for all devices in the converter. Finally, a laboratory prototype of the proposed converter has been built to verify the effectiveness of the proposed method experimentally. [ABSTRACT FROM AUTHOR]

For current-controlled grid-connected inverters with LCL filter, the essence of grid voltage full feedback is to improve the output impedance of grid-connected inverters to infinity, which can eliminate the influences of grid voltage distortion and the non-negligible grid impedance. However, existing full feedforward strategies are complex and control delay cannot be compensated precisely, which leads to the instability of system when the full feedforward of the voltage at the point of common coupling under the weak grid is adopted. This article first proposes a simplified full feedforward strategy based on grid-side inductor volt-age differential feedback active damping (GIVD-AD). Second, repetitive prediction (RP) is used to compensate for the control delay. Then, a virtual impedance branch is added and an adaptive algorithm for modifying virtual impedance based on the difference between predicted grid voltages by Newton interpolation prediction (NIP) and RP is proposed. With the proposed method, grid-connected inverters can work stably when grid impedance changes suddenly and exhibit strong rejection ability against grid-voltage harmonics. Finally, simulative and experimental results from a 3-kW single-phase grid-connected inverter are provided to prove the effectiveness of the proposed strategy. [ABSTRACT FROM AUTHOR]

Soft-switching technique contributes to higher conversion efficiency and switching frequency for transformerless grid-connected inverters (TLIs), which is beneficial to improve power density and reduce cost. However, existing soft-switching TLIs can only operate with unity power factor; as a consequence, they could not supply reactive power required by newly technical standards. In order to solve this issue, a novel zero-voltage-transition (ZVT) scheme has been proposed in this article, and two resonant tanks with a compact structure are applied in H6-type topology. The derived ZVT inverter enables high-frequency switches of both positive and negative power regions to be turned on and off under zero-voltage conditions, as well as all auxiliary switches can be turned on with zero-current switching. Meanwhile, unipolar differential-mode voltage and constant common-mode voltage characteristics are also maintained. Finally, comprehensive experiment results from a 100-kHz/1-kW prototype are provided to verify the correctness of the proposed inverter. [ABSTRACT FROM AUTHOR]

This letter proposes a fast current control scheme for ac drives by minimizing the latency from current sampling to the updation of a pulsewidth-modulation (PWM) command. By reconstructing the architecture of a linear controller, the minimal necessary steps to obtain the output voltage are deduced as the primary calculation, and the other computation work of the current loop is done in the postcalculation after updating the PWM command. With the proposed method, the computational delay is reduced with negligible loss in the available modulation index, and a higher stability margin or system bandwidth is realized. Also, the developed controller structure exhibits inherited antiwindup characteristics. The technique has been validated by experimental investigations on a permanent magnet synchronous motor. [ABSTRACT FROM AUTHOR]