Search

China's first optical stereo mapping satellite with a sub-meter resolution, GaoFen-7 (GF-7), launched in November 2019, shows significant potential for providing high-resolution topographic and geomorphic data for quantitative research on active tectonics. However, no studies have evaluated the capability of the GF-7-generated digital elevation model (DEM) for quantitatively studying active tectonics. This study aimed to validate the accuracy of the DEMs extracted from GF-7 stereo imagery, with or without ground control points (GCPs), and evaluated the potential of applying GF-7 DEMs to active tectonics. First, GF-7 stereo images were processed to obtain DEMs with a spatial resolution of 2 m, utilizing three different methods, including block adjustment without GCPs, block adjustment with the aid of Google Earth images and SRTM DEM, and block adjustment with GCPs derived from the Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) data. These three generated DEMs were called GF-7 DEMMethod1, GF-7 DEMMethod2, and GF-7 DEMMethod3, respectively, and were verified by the airborne LiDAR data in the Hasishan section of the Haiyuan fault. Second, the capability of the GF-7 DEMs for identifying active faults, fault scarps, and horizontal offsets was evaluated. Finally, 8 vertical and 13 horizontal offsets were measured based on three different GF-7 DEMs, and airborne LiDAR data were used to verify the measurements' accuracies. The results indicated that the accuracy of GF-7 DEMMethod1 was the worst and that of GF-7 DEMMethod3 was superior to that of GF-7 DEMMethod2. The GF-7 DEMs could effectively identify the apparent fault scarps and horizontal offsets. The RMSE values of the vertical offsets measured based on GF-7 DEMMethod1, GF-7 DEMMethod2, and GF-7 DEMMethod3 were 0.55 m, 0.55 m, and 0.41 m, respectively. The horizontal offsets yielded RMSE values of 3.98 m, 2.52 m, and 1.37 m, respectively. These findings demonstrated that vertical and horizontal offsets could be accurately measured using the DEMs generated from GF-7 stereo images. Meanwhile, our study indicated that the GCPs derived from ICESat-2 data could be utilized to improve the accuracies of the GF-7 DEM, and the measurements of vertical and horizontal offsets. [ABSTRACT FROM AUTHOR]

The digital elevation model (DEM) acquired through photogrammetry or LiDAR usually exposes voids due to phenomena such as instrumentation artifact, ground occlusion, etc. For this reason, this paper proposes a multiattention generative adversarial network model to fill the voids. In this model, a multiscale feature fusion generation network is proposed to initially fill the voids, and then a multiattention filling network is proposed to recover the detailed features of the terrain surrounding the void area, and the channel-spatial cropping attention mechanism module is proposed as an enhancement of the network. Spectral normalization is added to each convolution layer in the discriminator network. Finally, the training of the model by a combined loss function, including reconstruction loss and adversarial loss, is optimized. Three groups of experiments with four different types of terrains, hillsides, valleys, ridges and hills, are conducted for validation of the proposed model. The experimental results show that (1) the structural similarity surrounding terrestrial voids in the three types of terrains (i.e., hillside, valley, and ridge) can reach 80–90%, which implies that the DEM accuracy can be improved by at least 10% relative to the traditional interpolation methods (i.e., Kriging, IDW, and Spline), and can reach 57.4%, while other deep learning models (i.e., CE, GL and CR) only reach 43.2%, 17.1% and 11.4% in the hilly areas, respectively. Therefore, it can be concluded that the structural similarity surrounding the terrestrial voids filled using the model proposed in this paper can reach 60–90% upon the types of terrain, such as hillside, valley, ridge, and hill. [ABSTRACT FROM AUTHOR]