Search

As urban economies flourish and populations become increasingly concentrated, urban surface deformation has emerged as a critical factor in city planning that cannot be overlooked. Surface deformation in urban areas can lead to deformations in structural supports of infrastructure such as road bases and bridges, thereby posing a serious threat to public safety and creating significant safety hazards. Consequently, research focusing on the monitoring of urban surface deformation holds paramount importance. Interferometric synthetic aperture radar (InSAR), as an important means of earth observation, has all-day, wide-range, high-precision, etc., characteristics and is widely used in the field of surface deformation monitoring. However, traditional solitary InSAR techniques are limited in their application scenarios and computational characteristics. Additionally, the manual selection of ground control points (GCPs) is fraught with errors and uncertainties. Permanent scatterers (PS) can maintain high interferometric coherence in man-made building areas, and distributed scatterers (DS) usually show moderate coherence in areas with short vegetation; the combination of DS and PS solves the problem of manually selecting GCPs during track re-flattening and regrading, which affects the monitoring results. In this paper, 45 Sentinel-1B data from 16 February 2019 to 14 December 2021 are used as the data source in the urban area of Horqin District, Tongliao City, Inner Mongolia Autonomous Region, for example. A four-threshold (coherence coefficient threshold, FaSHPS adaptive threshold, amplitude divergence index threshold, and deformation velocity interval) GCPs point screening method for PS-DS, as well as a Small Baseline Subset-Permanent Scatterers-Distributed Scatterers-Interferometric Synthetic Aperture Radar (SBAS-PS-DS-InSAR) method for selecting PS and DS points as ground control points for orbit refinement and re-flattening, are proposed. The surface deformation results obtained using the Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) and the SBAS-PS-DS-InSAR proposed in this paper were comparatively analysed and verified. The maximum cumulative line-of-sight settlements were −90.78 mm and −83.68 mm, and the maximum cumulative uplifts are 74.94 mm and 97.56 mm, respectively; the maximum annual average line-of-sight settlements are −35.38 mm/y and −30.38 mm/y, and the maximum annual average uplifts are 25.27 mm/y and 27.92 mm/y. The results were evaluated and analysed in terms of correlation, mean absolute error (MAE), and root mean square error (RMSE). The deformation results of the two InSAR methods were evaluated and analysed in terms of correlation, MAE, and RMSE. The errors show that the Pearson correlation coefficients between the vertical settlement results obtained using the SBAS-PS-DS-InSAR method and the GPS monitoring results were closer to 1. The maximum MAE and RMSE were 13.7625 mm and 14.8004 mm, respectively, which are within the acceptable range; this confirms that the monitoring results of the SBAS-PS-DS-InSAR method were better than those of the original SBAS-InSAR method. SBAS-InSAR method, which is valid and reliable. The results show that the surface deformation results obtained using the SBAS-InSAR, SBAS-PS-DS-InSAR, and GPS methods have basically the same settlement locations, extents, distributions, and temporal and spatial settlement patterns. The deformation results obtained using these two InSAR methods correlate well with the GPS monitoring results, and the MAE and RMSE are within acceptable limits. By comparing the deformation information obtained using multiple methods, the surface deformation in urban areas can be better monitored and analysed, and it can also provide scientific references for urban municipal planning and disaster warning. [ABSTRACT FROM AUTHOR]

With the acceleration of urbanisation, urban areas are subject to the combined effects of the accumulation of various natural factors, such as changes in temperature leading to the thermal expansion or contraction of surface materials (rock, soil, etc.) and changes in precipitation and humidity leading to an increase in the self-weight of soil due to the infiltration of water along the cracks or pores in the ground. Therefore, the subsidence of urban areas has now become a serious geological disaster phenomenon. However, the use of traditional neural network prediction models has limitations when examining the causal relationships between time series surface deformation data and multiple influencing factors and when applying multiple influencing factors for predictive analyses. To this end, Sentinel-1A data from March 2017 to February 2023 were used as the data source in this paper, based on time series deformation data acquired using the small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) technique. A sparrow search algorithm–convolutional neural network–long short-term memory (SSA-CNN-LSTM) neural network prediction model was built. The six factors of temperature, humidity, precipitation, and ground temperature at three different depths below the surface (5 cm, 10 cm, and 15 cm) were taken as the input of the model, and the surface deformation data were taken as the output of the neural network model. The correlation between the spatial and temporal evolution characteristics of the ground subsidence in urban areas and various influencing factors was analysed using grey correlation analysis, which proved that these six factors contribute to some extent to the deformation of the urban surface. The main urban area of Hohhot City, Inner Mongolia Autonomous Region, was used as the study area. In order to verify the efficacy of this neural network prediction model, the prediction effects of the multilayer perceptron (MLP), backpropagation (BP), and SSA-CNN-LSTM models were compared and analysed, with the values of the correlation coefficients of the feature points of A1, B1, and C1 being in the range of 0.92, 0.83, and 0.93, respectively. The results show that compared with the traditional MLP and BP neural network models, the SSA-CNN-LSTM model achieves a higher performance in predicting time series surface deformation data in urban areas, which provides new ideas and methods for this area of research. [ABSTRACT FROM AUTHOR]

Polarimetric target decomposition algorithms have played an important role in extracting the scattering characteristics of buildings, crops, and other fields. However, there is limited research on the scattering characteristics of grasslands and a lack of volume scattering models established for grasslands. To improve the accuracy of the polarimetric target decomposition algorithm applicable to grassland environments, this paper proposes an adaptive polarimetric target decomposition algorithm (APD) based on the anisotropy degree (A). The adaptive volume scattering model is used in APD to model volume scattering in forest and grassland regions separately by adjusting the value of A. When A > 1, the particle shape becomes a disk, and the grassland canopy is approximated as a cloud layer composed of randomly oriented disk particles; when A < 1, the particle shape is a needle, simulating the scattering mechanism of forests. APD is applied to an L-band AirSAR dataset from San Francisco, a C-band AirSAR dataset from Hunshandak grassland in Inner Mongolia Autonomous Region, and an X-band COSMO-SkyMed dataset from Xiwuqi grassland in Inner Mongolia Autonomous Region to verify the effectiveness of this method. Comparison studies are carried out to test the performance of APD over several target decomposition algorithms. The experimental results show that APD outperforms the algorithms tested in terms of this study in decomposition accuracy for grasslands and forests on different bands of data. [ABSTRACT FROM AUTHOR]

The durability of concrete is critical for the service life of concrete structures, and it is influenced by various factors. This paper investigates the impact of the relative humidity (RH) of the curing environment on the durability of five different concrete types. The aim is to determine a suitable approach for designing concrete that is well-suited for use in the salt lake region of Inner Mongolia. The concrete types comprise ordinary Portland cement (OPC), high-strength expansive concrete (HSEC), high-strength expansive concrete incorporating silica fume, fly ash, and blast furnace slag (HSEC-SFB), steel fiber-reinforced high-strength expansive concrete (SFRHSEC), and high elastic modulus polyethylene fiber-reinforced high-strength expansive concrete (HFRHSEC). All these concrete types underwent a 180-day curing process at three distinct relative humidities (RH = 30%, 50%, and 95%) before being subjected to freeze–thaw cycles in the Inner Mongolia salt lake brine. The curing environment with a 95% RH is referred to as the standard condition. The experimental results reveal that the durability of OPC and HSEC decreases significantly with increasing relative humidity. In comparison with the control sample cured in 95% RH, the maximum freeze–thaw cycles for concrete cured in lower RHs are only 31% to 76% for OPC and 66% to 77% for HSEC. However, the sensitivity of the durability of HSEC-SFB, SFRHSEC, and HFRHSEC to variations in RH in the curing environment diminishes. In comparison with the corresponding reference value, the maximum freeze–thaw cycles for samples cured in dry conditions increase by 14% to 17% for HSEC-SFB and 21% for SFRHSEC. Specifically, the service life of HFRHSEC cured in a low RH is 25% to 46% higher than the reference value. The durability of HSEC-SFB, SFRHSEC, and HFRHSEC has been proven to be appropriate for structures located in the salt lake region of Inner Mongolia. [ABSTRACT FROM AUTHOR]

Satellite laser altimetry technology, a novel space remote sensing technique, actively acquires high-precision elevation information about the Earth's surface. However, the accuracy of laser altimetry can be compromised by alterations in the satellite-ground environment, thermal dynamics, and cosmic radiation. These factors may induce subtle variations in the installation and internal structure of the spaceborne laser altimeter on the satellite platform, diminishing measurement precision. In-orbit calibration is thus essential to enhancing the precision of laser altimetry. Through collaborative calculations between satellite and ground stations, we can derive correction parameters for laser pointing and ranging, substantially improving the accuracy of satellite laser altimetry. This paper introduces a sophisticated calibration method for laser altimeter pointing and ranging that utilizes dense control points. The approach interpolates discrete ground control point data into continuous simulated terrain using empirical Bayesian kriging, subsequently categorizing the data for either pointing or ranging calibration according to their respective functions. Following this, a series of calibration experiments are conducted, prioritizing "pointing" followed by "ranging" and continuing until the variation in the ranging calibration results falls below a predefined threshold. We employed experimental data from ground control points (GCPs) in Xinjiang and Inner Mongolia, China, to calibrate the GaoFen-7 (GF-7) satellite Beam 2 laser altimeter as per the outlined method. The calibration outcomes were then benchmarked against those gleaned from infrared laser detector calibration, revealing disparities of 1.12 s in the pointing angle and 2 cm in the ranging correction value. Post validation with ground control points, the measurement accuracy was refined to 0.15 m. The experiments confirm that the proposed calibration method offers accuracy comparable to that of infrared laser detector calibration and can facilitate the updating of 1:10,000 topographic maps utilizing stereo optical imagery. Furthermore, this method is more cost-effective and demands fewer personnel for ground control point collection, enhancing resource efficiency compared to traditional infrared laser detector calibration. The proposed approach surpasses terrain-matching limitations when calibrating laser ranging parameters and presents a viable solution for achieving frequent and high-precision in-orbit calibration of laser altimetry satellites. [ABSTRACT FROM AUTHOR]

With the wide application of remote sensing technology, target detection based on deep learning has become a research hotspot in the field of remote sensing. In this paper, aimed at the problems of the existing deep-learning-based desert land intelligent extraction methods, such as the spectral similarity of features and unclear texture features, we propose a multispectral remote sensing image desert land intelligent extraction method that takes into account band information. Firstly, we built a desert land intelligent interpretation dataset based on band weighting to enhance the desert land foreground features of the images. On this basis, we introduced the deformable convolution adaptive feature extraction capability to U-Net and developed the Y-Net model to extract desert land from Landsat remote sensing images covering the Inner Mongolia Autonomous Region. Finally, in order to analyze the spatial and temporal trends of the desert land in the study area, we used a structural equation model (SEM) to evaluate the direct and indirect effects of natural conditions and human activities, i.e., population density (PD), livestock volume (LS), evaporation (Evp), temperature (T), days of sandy wind conditions (LD), humidity (RH), precipitation (P), anthropogenic disturbance index (Adi), and cultivated land (CL). The results show that the F1-score of the Y-Net model proposed in this paper is 95.6%, which is 11.5% more than that of U-Net. Based on the Landsat satellite images, the area of desert land in the study area for six periods from 1990 to 2020 was extracted. The results show that the area of desert land in the study area first increased and then decreased. The main influencing factors have been precipitation, humidity, and anthropogenic disturbance, for which the path coefficients are 0.646, 0.615, and 0.367, respectively. This study will be of great significance in obtaining large-scale and long-term time series of desert land cover and revealing the inner mechanism of desert land area change. [ABSTRACT FROM AUTHOR]

Metal migration and precipitation in hydrothermal fluids are important topics in economic geology. The Hongling polymetallic deposit comprises one of the most important parts of the Huanggangliang–Ganzhuermiao polymetallic metallogenic belt, which is in eastern Inner Mongolia. Except for lead–zinc skarn, minor cassiterite in the skarn and disseminated W–Sn mineralization in granitic rocks have also been found. The dominant Sn–W mineralization is in the northern part of the deposit, occurring as disseminated wolframite and cassiterite in aplite hosted in Mesozoic granite porphyry. The aplite together with pegmatite K-feldspar–quartz comprises vein dikes hosted in the granite porphyry, providing evidence for the transition from melt to fluid. The veins, dikes, and Sn–W mineralization in the aplite provide an opportunity to investigate fluid exsolution and the mechanics of metal precipitation. Based on field observations, the micrographic and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) results of the vein dikes, chronology, and the whole-rock geochemistry of the host rock, together with the fluid inclusion results, this paper discusses the characteristics of the causative magma, the mechanics of fluid exsolution and W–Sn precipitation. Our results show that the causative magma is of highly fractionated A-type granite affinity and has an intrusive age of late Mesozoic (133.3 ± 0.86 Ma). The magmatic evolution during shallow emplacement led to immiscibility between highly volatile, high-silica, and W- and Sn-enriched melts from the parent magma, followed by fluid exsolution from the water-rich melt. The alkaline-rich fluid exsolution led to a change in the redox state of the magma and the chilling of the melt. Fluid boiling occurred soon after the fluid exsolution and was accompanied by the degassing of CO2. The boiling and escape of CO2 from the fluid led to changes in fluid redox and W and Sn precipitation; thus, the W and Sn mineralization are mostly hosted in causative intrusions or peripheral wall rocks, which can be used as indicators for Sn–W exploration in the area. [ABSTRACT FROM AUTHOR]

Obtaining accurate and timely crop area information is crucial for crop yield estimates and food security. Because most existing crop mapping models based on remote sensing data have poor generalizability, they cannot be rapidly deployed for crop identification tasks in different regions. Based on a priori knowledge of phenology, we designed an off-center Bayesian deep learning remote sensing crop classification method that can highlight phenological features, combined with an attention mechanism and residual connectivity. In this paper, we first optimize the input image and input features based on a phenology analysis. Then, a convolutional neural network (CNN), recurrent neural network (RNN), and random forest classifier (RFC) were built based on farm data in northeastern Inner Mongolia and applied to perform comparisons with the method proposed here. Then, classification tests were performed on soybean, maize, and rice from four measurement areas in northeastern China to verify the accuracy of the above methods. To further explore the reliability of the method proposed in this paper, an uncertainty analysis was conducted by Bayesian deep learning to analyze the model's learning process and model structure for interpretability. Finally, statistical data collected in Suibin County, Heilongjiang Province, over many years, and Shandong Province in 2020 were used as reference data to verify the applicability of the methods. The experimental results show that the classification accuracy of the three crops reached 90.73% overall and the average F1 and IOU were 89.57% and 81.48%, respectively. Furthermore, the proposed method can be directly applied to crop area estimations in different years in other regions based on its good correlation with official statistics. [ABSTRACT FROM AUTHOR]

Following the launch of the ZY1-02E satellite, the thermal infrared sensor aboard the satellite experienced alterations in the space environment, leading to varying degrees of attenuation in some components. The laboratory calibration accuracy could not satisfy the demands of quantitative production, and a certain degree of deviation was observed in on-orbit calibration. To accurately characterize the on-orbit radiation properties of thermal infrared remote sensing payloads, an absolute radiometric calibration campaign was carried out at the Ulansuhai Nur and Baotou calibration sites in Inner Mongolia in July 2022. This paper outlines the processes of onboard calibration and vicarious calibration for the ZY1-02E satellite, comparing the outcomes of onboard calibration with those of vicarious calibration. The onboard calibration method involved internal calibration, while the vicarious calibration method utilized an on-orbit absolute radiometric calibration technique based on various natural features that were not constrained by satellite–Earth spectrum matching requirements. Calibration coefficients were acquired, and the absolute radiometric calibration results of on-orbit vicarious and onboard calibration were compared, analyzed, and verified using the radiance computed from measured data and the reference sensor data. The accuracy of on-orbit absolute vicarious calibration was determined, and the causes for the decline in the radiation calibration accuracy on the orbiting satellite were examined. The findings revealed that the vicarious calibration results exhibited a lower percentage of radiance deviation compared with the onboard calibration results, meeting the quantitative requirements of remote sensing data. These results were significantly better than those obtained from onboard blackbody calibration, offering a data foundation for devising satellite calibration plans and enhancing calibration algorithms. In the future, the developmental trend of on-orbit radiometric calibration technology will encompass high-precision and slow-attenuation onboard calibration techniques, as well as high-frequency and simplified-step vicarious calibration methods. [ABSTRACT FROM AUTHOR]

Simple Summary: In recent years, the shortage of cow stocks and the reduction of cow breeders in China have caused a shortage of cattle resources and a high price of calves, which has become a bottleneck restricting the further development of China's beef cattle industry. At present, there are few studies on the decision-making behavior of cow breeding in China. In order to explore the factors that affect the decision-making behavior on cow breeding by beef cattle farmers, this paper uses field survey data to make an empirical analysis through the Logit ISM model. The results show that the age of the breeder, the breeding year, the planting area of forage, market expectations, the loan amount, the breeding method policy publicity and policy subsidies are significant factors affecting the decision-making behavior of beef cattle farmers on cow breeding. The beef cattle industry is an important part of herbivorous animal husbandry and an important industry to enrich the dietary structure of residents and promote the income of farmers and herdsmen. The cow is an important foundation to support the healthy development of the beef cattle industry, which is related to the stability of cattle sources and the sustainable development of the industry. However, in recent years, the shortage of cows in our country has led to the shortage of cattle resources and the high price of calves, which has restricted the further development of our beef cattle industry. In order to explore the factors that affect the decision-making behavior behind cow breeding and to find the right policy to mobilize the enthusiasm for cow breeding, based on the field survey of five provinces (cities and regions), including Inner Mongolia Autonomous Region and Ningxia Hui Autonomous Region, this paper conducts an empirical analysis through the Logit ISM model. The results show that market expectation is the surface factor that directly affects the decision-making behavior of cow breeding. The influencing factors of the middle layer are policy propaganda, policy subsidies, breeding years, and feeding methods. The deep root factors are the age of the breeder, the amount of loan, and whether to plant feed crops. Based on this, this paper proposes that we should actively promote the importance of cow breeding, strengthen policy support for cow breeding, formulate scientific and reasonable subsidy policies for cows, innovate financial support methods to solve the problem of fund shortage of farmers, and develop forage resources and reduce the breeding cost of cows. [ABSTRACT FROM AUTHOR]

As a raw material for clean energy supply for the new generation, the soybean is conducive to the realization of global energy transition and sustainable development in the context of "carbon neutrality". However, global warming has been affecting soybean yields in recent years. How to clarify the correlation between meteorological factors and soybean yields, so as to ensure the security of soybean growth and development and the stability of renewable energy development, is a key concern of the government and academia. Based on the data of temperature, precipitation, sunshine duration and active accumulated temperature during the soybean growing season in Hulunbuir, Inner Mongolia Autonomous Region from 1951 to 2019, and soybean yield data of the city from 1985 to 2019, this paper adopted statistical methods such as the Trend Analysis Method, the Rescaled Range Analysis Method and so on to analyze the trends of yield changes, characteristics of abrupt changes and periodic patterns of climate factors and soybean yields in Hulunbuir. A Pearson Correlation Analysis and a Grey Relation Analysis were used to explore the correlation between climatic factors and soybean yields, followed by a comprehensive impact model of the combined effect of temperature and precipitation on soybean yields established by the Method of Integral Regression. The results showed that temperature and active accumulated temperature are the dominant factors affecting soybean yields in Hulunbuir, while the decrease in precipitation is unfavorable to the improvement of soybean yields. Meanwhile, temperature and precipitation have different effects on the growth and development of the soybean at different stages. The conclusion of this paper is of great practical significance for Hulunbuir to promote the sustainable development of clean energy. [ABSTRACT FROM AUTHOR]

Simple Summary: In this paper, two new genera with two new species of Dermaptera are described from the Middle Jurassic Jiulongshan Formation of Daohugou, Inner Mongolia, China. The discovery of these two new species enriches the comparatively meagre fossil record of Dermaptera, particularly from the Middle Jurassic. The description of Applanatiforceps angustus is another brick laid in the foundation of protodiplatyid diversity, and the new genus Ekpagloderma gracilentum highlights the diversity of cercal forms among Aglyptodermatinae and the remarkable homogeneity of the general morphology of groups within this clade. Two new genera and species of Dermaptera are described from the Middle Jurassic Jiulongshan Formation of Daohugou, Inner Mongolia, China: Applanatiforceps angustus gen. et sp. nov. in the archidermapteran family Protodiplatyidae, and Ekpagloderma gracilentum gen et sp. nov. in the eodermapteran family Semenoviolidae. Applanatiforceps shares the typical characters of the extinct suborder Archidermaptera (e.g., pentamerous meta tarsi, filiform and multimerous cerci) and externalized ovipositor. The family identity of the Protodiplatyidae can be further distinguished by comparing this new genus with other genera of the Protodiplatyidae. As a result of its large compound eyes, tegmina without venation, body sparsely setose, legs rather short and slender, and shape of the veinless tegmina, Ekpagloderma is classified in the subfamily Aglyptodermatinae. Ekpagloderma not only has the typical features of the Aglyptodermatinae, but also exhibits a more primitive slender segmented cerci, which is different from all other genera of Eodermaptera. In fact, the diversity of Eodermaptera as known today indicates some of the challenges in understanding the suborder and whether or not it is monophyletic as historically construed, or if the separation of Turanodermaptera is justified. [ABSTRACT FROM AUTHOR]

Simple Summary: Osmylopsychopidae, an extinct family of Neuroptera, is closely related to the extant Psychopsidae. The sporadic records of this family and limited preservation of fossil specimens have hindered the understanding of the evolution of Osmylopsychopidae. In this paper, one new genus with four new species of Osmylopsychopidae are described from the Middle Jurassic Jiulongshan Formation of northeastern China. These newly discovered osmylopsychopids with a forewing length of ca. 10 mm (implying small body size), clearly distinguished from the traditional sense of Osmylopsychopidae, suggest that Osmylopsychopidae possibly underwent a significant diversification during the Mesozoic. One new genus with four new species sharing the similar character of a forewing length of ca. 10 mm, namely, Minipsychops spasulus gen. et sp. nov., Minipsychops polychotomus sp. nov., Minipsychops densus sp. nov., and Minipsychops unicus sp. nov., are described from the Middle Jurassic Jiulongshan Formation of Daohugou, Inner Mongolia in China. These new insects can be attributed to Osmylopsychopidae for their distinctive configuration of costal space and the venations of RP1 and Cu. Compared with the typically medium to large body sizes of known osmylopsychopids, these new Middle Jurassic taxa of a particularly miniaturized lineage not only enrich the species diversity of Osmylopsychopidae, but also enhance our understanding of the historical evolution of these poorly known lacewings. [ABSTRACT FROM AUTHOR]

To address the severity of the wind and light abandonment problem and the economics of hydrogen energy production and operation, this paper explores the problem of multi-cycle resource allocation optimization of hydrogen storage systems for coal–wind–solar power generation. In view of the seriousness of the problem of abandoning wind and photovoltaic power and the economy of hydrogen production and operation, the node selection and scale setting issues for hydrogen production and storage, as well as decision-making problems such as the capacity of new transmission lines and new pipelines and route planning, are studied. This research takes the satisfaction of energy supply as the basic constraint and constructs a multi-cycle resource allocation optimization model for an integrated energy system, aiming to achieve the maximum benefit of the whole system. Using data from Inner Mongolia, where wind abandonment and power limitation are severe, and Beijing and Shanxi provinces, where hydrogen demand is high, this paper analyzes the benefits of the hydrogen storage system for coal–wind–solar power generation, and explores the impact of national subsidy policies and technological advances on system economics. [ABSTRACT FROM AUTHOR]

Studying surface geochemical anomalies is important for detecting the presence of mineral deposits. However, distinguishing inconspicuous geochemical anomalies is a challenge for geochemists. This paper studies geochemical quantitative prediction for Pb–Zn metallic mineral deposits by identifying inconspicuous surface geochemical anomalies mainly associated with the Permian and Jurassic strata in the middle-southern Da Hinggan Mountains metallogenic belt. Some new methods are employed to highlight weak surface geochemical anomalies. The weak surface geochemical anomalies of Pb and Zn are effectively highlighted by the average contrast values of Pb–Zn–Ag–Cd. The similarity coefficient with the large typical discovered deposits is used to identify new Pb–Zn mineralized anomalies and delineate new prospecting target areas. The denudation degree of mineral deposit is determined by the ratio of (W × Sn)/(As × Sb). The analogy method and areal productivity method are employed for resource prediction. Thirty-six prediction areas with Pb–Zn resources of 307.73 million tons are delineated. Five prediction areas are verified, and some new mineral deposits are proven by drilling. The verification results show that the predicted resources are very reasonable and credible. This paper is a successful case of quantitative prediction assessment of mineral resource potential, which can be used as a reference for future prospecting activities. [ABSTRACT FROM AUTHOR]

In this paper, recent research on terrestrial ecosystem predictability using the conditional nonlinear optimal parameter perturbation (CNOP-P) method is summarized. The main findings include the impacts of uncertainties in climate change on uncertainties in simulated terrestrial ecosystems, the identification of key physical parameters that lead to large uncertainties in terrestrial ecosystem modeling and prediction, and the evaluation of the simulation ability and prediction skill of terrestrial ecosystems by reducing key physical parameter errors. The study areas included the Inner Mongolia region, north–south transect of eastern China, and Qinghai–Tibet Plateau region. The periods of the studies were from 1961 to 1970 for the impacts of uncertainties in climate change on uncertainties in simulated terrestrial ecosystems, and from 1951 to 2000 for the identification of the most sensitive combinations of physical parameters. Climatic Research Unit (CRU) data were employed. The numerical results indicate the important role of nonlinear changes in climate variability due to the occurrences of extreme events characterized by CNOP-P in the abrupt grassland ecosystem equilibrium state and formation of carbon sinks in China. Second, the most sensitive combinations of physical parameters to the uncertainties in simulations and predictions of terrestrial ecosystems identified by the CNOP-P method were more sensitive than those obtained by traditional methods (e.g., one-at-a-time (OAT) and stochastic methods). Furthermore, the improvement extent of the simulation ability and prediction skill of terrestrial ecosystems by reducing the errors of the sensitive physical parameter combinations identified by the CNOP-P method was higher than that by the traditional methods. [ABSTRACT FROM AUTHOR]

Unregulated livestock breeding and grazing can degrade grasslands and damage the ecological environment. The combination of remote sensing and artificial intelligence techniques is a more convenient and powerful means to acquire livestock information in a large area than traditional manual ground investigation. As a mainstream remote sensing platform, unmanned aerial vehicles (UAVs) can obtain high-resolution optical images to detect grazing livestock in grassland. However, grazing livestock objects in UAV images usually occupy very few pixels and tend to gather together, which makes them difficult to detect and count automatically. This paper proposes the GLDM (grazing livestock detection model), a lightweight and high-accuracy deep-learning model, for detecting grazing livestock in UAV images. The enhanced CSPDarknet (ECSP) and weighted aggregate feature re-extraction pyramid modules (WAFR) are constructed to improve the performance based on the YOLOX-nano network scheme. The dataset of different grazing livestock (12,901 instances) for deep learning was made from UAV images in the Hadatu Pasture of Hulunbuir, Inner Mongolia, China. The results show that the proposed method achieves a higher comprehensive detection precision than mainstream object detection models and has an advantage in model size. The m A P of the proposed method is 86.47%, with the model parameter 5.7 M. The average recall and average precision can be above 85% at the same time. The counting accuracy of grazing livestock in the testing dataset, when converted to a unified sheep unit, reached 99%. The scale applicability of the model is also discussed, and the GLDM could perform well with the image resolution varying from 2.5 to 10 cm. The proposed method, the GLDM, was better for detecting grassland grazing livestock in UAV images, combining remote sensing, AI, and grassland ecological applications with broad application prospects. [ABSTRACT FROM AUTHOR]

With the centralization of wind power development, power-prediction technology based on wind power clusters has become an important means to reduce the volatility of wind power, so a large-scale power-prediction method of wind power clusters is proposed considering the prediction stability. Firstly, the fluctuating features of wind farms are constructed by acquiring statistical features to further build a divided model of wind power clusters using fuzzy clustering algorithm. Then the spatiotemporal features of the data of wind power are obtained using a spatiotemporal attention network to train the prediction model of wind power clusters in a large scale. Finally, the stability of predictive performance of wind power is analyzed using the comprehensive index evaluation system. The results show that the RMSE of wind power prediction is lower than 0.079 at large-scale wind farms based on the prediction method of wind power proposed in this paper using experience based on the data of 159 wind farms in the Nei Monggol Autonomous Region in China and the extreme error is better than 25% for the total capacity of wind farms, which indicates high stability and accuracy. [ABSTRACT FROM AUTHOR]

The resulting maps of land use classification obtained by pixel-based methods often have salt-and-pepper noise, which usually shows a certain degree of cluttered distribution of classification image elements within the region. This paper carries out a study on crop classification and identification based on time series Sentinel images and object-oriented methods and takes the crop recognition and classification of the National Modern Agricultural Industrial Park in Jalaid Banner, Inner Mongolia, as the research object. It uses the Google Earth Engine (GEE) cloud platform to extract time series Sentinel satellite radar and optical remote sensing images combined with simple noniterative clustering (SNIC) multiscale segmentation with random forest (RF) and support vector machine (SVM) classification algorithms to classify and identify major regional crops based on radar and spectral features. Compared with the pixel-based method, the combination of SNIC multiscale segmentation and random forest classification based on time series radar and optical remote sensing images can effectively reduce the salt-and-pepper phenomenon in classification and improve crop classification accuracy with the highest accuracy of 98.66 and a kappa coefficient of 0.9823. This study provides a reference for large-scale crop identification and classification work. [ABSTRACT FROM AUTHOR]

Grasshoppers can greatly interfere with agriculture and husbandry, and they will breed and grow rapidly in suitable habitats. Therefore, it is necessary to extract the distribution of the grasshopper potential habitat (GPH), analyze the spatial-temporal characteristics of the GPH, and detect the different effects of key environmental factors in the meadow and typical steppe. To achieve the goal, this study took the two steppe types of Xilingol (the Inner Mongolia Autonomous Region of China) as the research object and coupled them with the MaxEnt and multisource remote sensing data to establish a model. First, the environmental factors, including meteorological, vegetation, topographic, and soil factors, that affect the developmental stages of grasshoppers were obtained. Secondly, the GPH associated with meadow and typical steppes from 2018 to 2022 were extracted based on the MaxEnt model. Then, the spatial-temporal characteristics of the GPHs were analyzed. Finally, the effects of the habitat factors in two steppe types were explored. The results demonstrated that the most suitable and moderately suitable areas were distributed mainly in the southern part of the meadow steppe and the eastern and southern parts of the typical steppe. Additionally, most areas in the town of Gaorihan, Honggeergaole, Jirengaole, as well as the border of Wulanhalage and Haoretugaole became more suitable for grasshoppers from 2018 to 2022. This paper also found that the soil temperature in the egg stage, the vegetation type, the soil type, and the precipitation amount in the nymph stage were significant factors both in the meadow and typical steppes. The slope and precipitation in the egg stage played more important roles in the typical steppe, whereas the aspect had a greater contribution to the meadow steppe. These findings can provide a methodical guide for grasshopper control and management and for further ensuring the security of agriculture and husbandry. [ABSTRACT FROM AUTHOR]

Groundwater is a primary freshwater resource for human consumption and an essential source for industry and agriculture. Therefore, understanding its spatial and temporal trends and drivers is crucial for governments to take appropriate measures to manage water resources. This paper uses Gravity Recovery and Climate Experiment (GRACE) satellite data and the Global Land Data Assimilation System (GLDAS) to derive groundwater storage anomalies (GWSAs) and to analyze the spatial and temporal trends of GWSA in different regions of China (Xinjiang, Tibet, Inner Mongolia, North China Plain, South China, and Northeast China). It used groundwater-level observation data to verify the accuracy of GWSA estimates and analyzed the drivers of regional GWSA changes. The results showed that: (1) GWSA in South China increased at a rate of 4.79 mm/a from 2003 to 2016, and GWSA in other regions in China showed a decreasing trend. Among them, the decline rates of GWSA in Xinjiang, Tibet, Inner Mongolia, North China Plain, and Northeast China were −6.24 mm/a, −3.33 mm/a, −3.17 mm/a, −7.35 mm/a, and −0.75 mm/a, respectively. (2) The accuracy of the annual-scale GWSA estimates was improved after deducting gravity losses due to raw coal quality, and the correlation coefficient between GWSA and groundwater levels monitored by observation wells increased. (3) In Xinjiang, the annual water consumed by raw coal mining, industrial, and agricultural activities had a greater impact on GWSA than rainfall and temperature, so these human activities might be the main drivers of the continued GWSA decline in Xinjiang. Water consumption by raw coal mining and industry might be the main drivers of the continued decline in GWSA in Inner Mongolia and the North China Plain. The increase in groundwater storage in South China was mainly due to the recharge of rainfall. [ABSTRACT FROM AUTHOR]

Background: Desertification is one of the main obstacles to global sustainable development. Monitoring, evaluating and mastering its driving factors are very important for the prevention and control of desertification. As one of the largest deserts in China, the development of desertification in Otindag Sandy Land (OSL) resulted in the reduction in land productivity and serious ecological/environmental consequences. Although many ecological restoration projects have been carried out, the vegetation restoration of OSL and the impact mechanism of climate and human activities on desertification remain unclear. Methods: Taking OSL as the research area, this paper constructs the desertification index by using the remote sensing images and meteorological and socio-economic data, between 1986 and 2016, and analyzes the spatio-temporal evolution process and driving factors of desertification by using trend analysis and spearman rank correlation. Results: The results showed that: (1) Desertification in the OSL has fluctuated greatly during the past 30 years. Desertification recovered between 1986 and 1990, expanded and increased between 1990 and 2000, reduced between 2000 and 2004, developed rapidly between 2004 and 2007, and recovered again between 2007 and 2016; (2) The desertification of OSL is dominated by a non-significant change trend, accounting for 73.27%. In the significant change trend, the area of desertification rising trend is 20.32%, which is mainly located in the north and east, and the area of declining trend is 6.41%, which is mainly located in the southwest; (3) Desertification is the result of the superposition of climate and human activities. Climate change is the main influencing factor, followed by human activities, and the superposition effects of the two are spatio-temporal differences. Conclusions: These results shed light on the development of desertification in OSL and the relative importance and complex interrelationship between human activities and climate in regulating the process of desertification. Based on this, we suggest continuing to implement the ecological restoration policy and avoid the destruction of vegetation by large-scale animal husbandry in order to improve the situation of desertification. [ABSTRACT FROM AUTHOR]

Aeromagnetic gradient data have higher horizontal resolution on shallow sources, a magnetic anomaly that can better reflect the features of deeper sources. Therefore, we used a joint survey of aeromagnetic and gradient data to obtain the distribution of sources with different depths. In this paper, we propose an intersection constraint weighting (ICW) method based on aeromagnetic and gradient data for original and gradient anomalies with inconsistent high-low variation characteristics. The ICW method can effectively improve the resolution of inversion results and can more accurately obtain the distribution of magnetic bodies via cross-gradient by gradually adding a gradient component and applying a normalized property weighting function. Our theoretical model tests indicate that the distribution of the recovered magnetic susceptibility model of the ICW method was similar to that of the true model. In addition, the anomaly containing noise with different signal-to-noise ratios verified that the ICW method had a stronger anti-noise ability than other methods. We also inverted real data in the Zhurihe area of the Inner Mongolia Autonomous Region in northern China. The inversion result showed that the main trend of high magnetic bodies was in the northeast direction, that the shallowest depth of high magnetic bodies was 100 m, and that the greatest depth was 960 m. [ABSTRACT FROM AUTHOR]

Simple Summary: Grasshoppers are among the most dangerous agricultural pests of China. However, the monitoring, prediction and control of grasshoppers are complex and difficult. Therefore, it is crucial to detect the key factors affecting the spatial distribution of grasshopper occurrence, understand the role of the environmental factors in grasshopper occurrence, and study whether different laws exist between different grass types. Here we conduct a species–environmental matching model integrated by Maxent model and remote sensing data to identify the spatial distribution of grasshopper occurrence in Inner Mongolia of China, analyze the related environmental variables and detect the most relevant environmental factors for grasshopper occurrence both in typical steppe and meadow steppe. Grasshoppers mainly threaten natural grassland vegetation and crops. Therefore, it is of great significance to understand the relationship between environmental factors and grasshopper occurrence. This paper studies the spatial distribution and key factors of grasshopper occurrence in two grass types by integrating a machine learning model (Maxent) and remote sensing data within the major grasshopper occurrence areas of Inner Mongolia, China. The modelling results demonstrate that the typical steppe has larger suitable area and more proportion for grasshopper living than meadow steppe. The soil type, above biomass, altitude and temperature mainly determine the grasshopper occurrence in typical steppe and meadow steppe. However, the contribution of these factors in the two grass types is significantly different. In addition, related vegetation and meteorological factors affect the different growing stages of grasshoppers between the two grass types. This study clearly defines the different effects of key environmental factors (meteorology, vegetation, soil and topography) for grasshopper occurrence in typical steppe and meadow steppe. It also provides a methodology to guide early warning and precautions for grasshopper pest prevention. The findings of this study will be helpful for future management measures, to ensure grass ecological environment security and the sustainable development of grassland. [ABSTRACT FROM AUTHOR]

The Grain for Green Project (GGP) has considerably improved the vegetation cover of the Loess Plateau, as well as changed the carbon and water coupling process of local vegetation to a certain extent. Water use efficiency (WUE) is a crucial measure for evaluating ecosystem responses to global climate change and is a key indicator of the carbon–water coupling between terrestrial ecosystems and the environment. A comprehensive understanding of the impact of vegetation reconstruction on WUE on the Loess Plateau is of great significance to the vegetation growth and contribution to sustainable of the Loess Plateau. In recent years, scholars have gained a more comprehensive understanding of the distribution and drivers of WUE on the Loess Plateau. However, through the study of carbon and water coupling in the Loess Plateau, it is found that the effects of different vegetation restoration levels on WUE are still to be studied in depth in terms of spatial and temporal heterogeneity and long timeseries. In this paper, we analyzed the trends of Normalized Difference vegetation cover (NDVI) and WUE from 2001 to 2010 and 2011 to 2020, respectively, to research at the WUE of the vegetation in this area in relation to vegetation restoration. It was found that the Loess Plateau's vegetation WUE rose from 2001 to 2020 at a rate of 0.023 g C kg−1 H2O per year, and that the increase from 2011 to 2020 was more significant than the growth from 2000 to 2010. The Loess Plateau's area with a growing trend in vegetation water use rate increased from 77.12% in 2001–2010 to 88.63% in 2011–2020, with the majority of the increased area occurring in the northeastern Inner Mongolia region. After 20 years of the reforestation project, the area where NDVI and WUE increased simultaneously accounted for 71.54% of the Loess Plateau, the area where NDVI increased but WUE decreased accounted for 10.95% of the Loess Plateau, and the area where NDVI increased but WUE decreased accounted for 7.15% of the Loess Plateau. The correlation between temperature precipitation and WUE was not significant for the whole Loess Plateau, further indicating that the increase in vegetation cover was the main reason for the increase in vegetation water efficiency. Therefore, the effect of vegetation cover on WUE should be fully considered when vegetation restoration is carried out on the Loess Plateau. [ABSTRACT FROM AUTHOR]

The services provided by grassland ecosystems are important and irreplaceable in maintaining the balance and stability of ecosystems. The spatiotemporal variations of grassland ecosystem service value (ESV) and its influencing factors in Inner Mongolia from 2000 to 2019 were studied in this paper. Based on the socio-economic data, remote sensing data, geographic data, and meteorological data, a dynamic ESV assessment method based on the equivalent factors was used to calculate the grassland ESV for each year. The spatiotemporal dynamic variation and future trend of grassland ESV were studied by coefficient of variation index (CV), Theil–Sen median trend analysis, Mann–Kendall test, and Hurst index, and the Geodetector was used to determine the main factors affecting the distribution of ESV. The results indicated that (1) the annual average grassland ESV of Inner Mongolia was higher in the northeast than in southwest, the average ESV was 2.0794 million CNY/km2, and the pixels were concentrated from 1 to 3 million CNY/km2, accounting for 75.46% of the study area; (2) during the study period, the average grassland ESV increased slowly with time at an annual growth rate of 0.2, and the total ESV decreased first and then increased with the change in grassland area; (3) the average volatility was 0.16, and pixels with CV values between 0.1 and 0.2 accounted for 69.2% of the study area, indicating the fluctuation of ESV was relatively stable during the study period; (4) 37.16% of the grassland ESV in Inner Mongolia decreased slightly and 41.77% increased slightly during these years, and the two parts showed opposite trends in the future; and (5) the single factor influencing the spatial distribution of grassland ESV was mainly normalized vegetation index (NDVI) and precipitation, and the multi-factor interactions were NDVI∩slope and NDVI∩precipitation. All influencing factors exhibited a stronger impact through the two-factor interaction. This study can provide reference values for the policymaking of natural resource conservation or restoration. [ABSTRACT FROM AUTHOR]

Distribution centers are quite important for logistics. In order to save costs, reduce energy consumption and deal with increasingly uncertain demand, it is necessary for distribution centers to select the location strategically. In this paper, a two-stage model based on an improved clustering algorithm and the center-of-gravity method is proposed to deal with the multi-facility location problem arising from a real-world case. First, a distance function used in clustering is redefined to include both the spatial indicator and the socio-economic indicator. Then, an improved clustering algorithm is used to determine the optimal number of distribution centers needed and the coverage of each center. Third, the center-of-gravity method is used to determine the final location of each center. Finally, the improved method is compared with the traditional clustering method by testing data from 12 cities in Inner Mongolia Autonomous Region in China. The comparison result proves the proposed method's effectiveness. [ABSTRACT FROM AUTHOR]

Coal is one of the fundamental fossil energy supporting the world's economy. The synergistic development between efficient coal mining and ecological environment protection is the inevitable requirement for the preservation of global harmony. As the world's largest coal producer, China has conducted a strategic shift from east to west in terms of the exploitation of its energy resources, posing a serious threat to the fragile ecological environment of the western region. In particular, the surface subsidence caused by coal mining is the root of the ecological deteriotation and the destruction of ground structures. However, it is difficult to reveal the law of large-scale surface subsidence in western mining areas merely by conventional measurement methods such as leveling, on account of the high intensity of coal seam mining, the weakness of the lithology of overlying rock and the large thickness of wind-blown sand strata. In view of this, small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) technology was used in this study to obtain the time series of surface vertical displacement during the whole mining process of the 2401 working face in the Yingpanhao coal mine, Inner Mongolia. Based on the deformation data, the dynamic evolution characteristics of surface subsidence under high intensity mining in the western mining area were analyzed exhaustively. It was found that the surface subsidence is characterized by an extensive coverage range (48.52 km2) with minimal ground settlement (250 mm) in the study area. Meanwhile, the boundary shape of the subsidence basin followed a "circular-parallelogram-trapezoid" changeable process and the coverage area of the basin experienced three stages: a linear increasing period, a temporary stagnation period, and a re-expansion period. Furthermore, there existed an abnormal uplift phenomenon on the east side of the open-off cut in the 2401 working face. Combined with the structure of overlying strata, this paper carried out a preliminary analysis on the reasons of the abovementioned phenomenon. The research results are of vital realistic significance for ground buildings and ecological environmental protection in the aeolian sand mining area in Western China. [ABSTRACT FROM AUTHOR]

Energy and the environment are important foundations for sustainable economic development. In order to realize the sustainable development of energy economy, clarify the respective responsibilities of the government and enterprises, and explore the internal mechanism of ecological compensation, this paper constructs an evolutionary game model by means of social benefits, ecological compensation, supervision costs, government subsidies, enterprise punishment, enterprise additional income, enterprise emission reduction costs and other means, through the government's supervision and non-supervision behavior, as well as the cooperation and non-cooperation behavior of enterprises, and analyzes the model parameters and game results. The research shows that: (1) due to the delay effect of technical progress of pollutant discharge, in the long run, the cost of enterprise emission reduction must be less than its benefits. (2) Social benefits brought by government regulation must exceed half of ecological compensation. (3) Government subsidy should not be higher than ecological compensation. Then, taking Inner Mongolia coal mine as an example, the field investigation is carried out from the three aspects of atmosphere, water, and soil, and the ecological environment loss of the mining area is preliminarily calculated based on the national technical specification for ecological environment assessment. Based on the above results, it shows that: (1) From the perspective of the government, social benefit must exceed USD 10.69 million annually; (2) from the perspective of enterprises, government subsidy should be lower than USD 21.38 million annually. In short, ecological compensation mechanism for coal resource development should include two parts: resource consumption reduction and environmental restoration; take the ecological compensation threshold as the standard, strictly eliminating declining enterprises, stimulating technological innovation, weakening the government subsidy, relying on non-governmental organizations to enlarge the social benefits brought by government supervision. [ABSTRACT FROM AUTHOR]

This paper presents scientific analyses of the wall paintings in Wudang Lamasery, which is located in the Baotou area of Inner Mongolia, China. Raman spectroscopy was used to analyze the pigments of the mural of the Lam rim Hall. The results show that vermilion, red lead, chrome yellow, emerald green and synthetic ultramarine were used. The existence of synthetic pigments provides a clue for the date the mural was painted. [ABSTRACT FROM AUTHOR]

Point of interest (POI) data can provide a clear spatial location and accurate attributes for geoscience research. The traditional assessment of Beautiful China construction (BCC) has relied on statistical materials, which have shortcomings in terms of timeliness, authenticity, efficiency, and accuracy. Referring to the theoretical framework of the Zhongke Beauty Index, we built an evaluation index system and technical process based on POI data. In terms of the Inner Mongolia Autonomous Region (IMAR), 5.09 million POIs were collected using the web crawler technique, and the Beautiful Inner Mongolia construction evaluation and analysis were performed. The results show the following: (1) POI data can be used to establish an evaluation index system for the construction of Beautiful Inner Mongolia on the county scale; in the dimensions of industrial development, social harmony, and institutional improvement, it shows especially good application prospects. (2) The Beautiful Inner Mongolia index in 2020 was 0.22. Among the five dimensions, the industrial development index was the highest, while the cultural heritage index was the lowest. We found significant spatial differences in the dimensions of cultural heritage as well as social harmony. (3) The areas in the IMAR with a low-level construction were mostly industrial and mining areas, agricultural counties, and other economically developing areas, among which the Baiyunebo mining area and Xianghuangqi and Shiguai areas had the lowest comprehensive beauty index values. (4) We also found large numerical disparities in the level of Beautiful Inner Mongolia construction between municipal districts and banners/counties, and the ranking of each region was affected by the population and coverage areas of administrative units. After verification, we found an overall good consistency between the evaluation indexes proposed in this paper and a previous study. Therefore, this paper provides a new perspective and an effective method for the application of Internet big data in economic and social evaluation work. [ABSTRACT FROM AUTHOR]

Estimating the carbon (C), nitrogen (N), and phosphorus (P) contents of a large-span grassland transect is essential for evaluating ecosystem functioning and monitoring biogeochemical cycles. However, the field measurements are scattered, such that they cannot indicate the continuous gradient change in the grassland transect. Although remote sensing methods have been applied for the estimation of nutrient elements at the local scale in recent years, few studies have considered the effective estimation of C, N, and P contents over large-span grassland transects with complex environment including a variety of grassland types (i.e., meadow, typical grassland, and desert grassland). In this paper, an information enhancement algorithm (involving spectral enhancement, regional enhancement, and feature enhancement) is used to extract the weak information related to C, N, and P. First, the spectral simulation algorithm is used to enhance the spectral information of Sentinel-2 imagery. Then, the enhanced spectra and meteorological data are fused to express regional characteristics and the fractional differential (FD) algorithm is used to extract sensitive spectral features related to C, N, and P, in order to construct a partial least-squares regression (PLSR) model. Finally, the C, N, and P contents are estimated over a West–East grassland transect in Inner Mongolia, China. The results demonstrate that: (i) the contents of C, N, and P in large-span transects can be effectively estimated through use of the information enhancement method involving spectral enhancement, regional feature enhancement, and information enhancement, for which the estimation accuracies (R2) were 0.88, 0.78, and 0.85, respectively. Compared with the estimation results of raw Sentinel-2 imagery, the RMSE was reduced by 3.42 g/m2, 0.14 g/m2, and 13.73 mg/m2, respectively; and (ii) the continuous change trend and spatial distribution characteristics of C, N, and P contents in the west–east transect of the Inner Mongolia Plateau were obtained, which showed decreasing trends in C, N, and P contents from east to west and the characteristics of meadow > typical grassland > desert grassland. Thus, the information enhancement algorithm can help to improve estimates of C, N, and P contents when considering large-span grassland transects. [ABSTRACT FROM AUTHOR]

As a clean form of energy utilization, wind power is important for alleviating climate change. Although no direct carbon emissions occur in wind power generation, there exist upstream carbon emissions from manufacturing and installation, which have indirect effects on both the locations of wind farms and areas involved in upstream production and manufacturing. In this paper, based on Input–Output based Life Cycle Analysis (IO-LCA), we explored the lifetime carbon emissions of 378 wind farms in China that were still in operation in 2015. The regional distributions of carbon emissions from wind farms during the whole lifetime were depicted. The embodied carbon emission transfers from the location of the wind farm operation to upstream turbine manufacturing regions were traced. The net emission reduction benefits among regions were also calculated. Results show that carbon emissions mainly distribute in Liaoning, Inner Mongolia, and Tianjin in the turbine manufacturing stage, with a total amount of 3.36 MT. Inner Mongolia contributes the largest carbon emissions (5.94 MT) in the farm construction stage. Inner Mongolia has transferred about 0.99 MT carbon emissions to itself and has the largest net emission reduction. Recognizing the carbon emission transfer of wind farms and dividing the carbon emission reduction responsibilities among regions may shed light on supply chain carbon emission reduction and provincial carbon quota allocation. [ABSTRACT FROM AUTHOR]