Search

Based on the single-screw compressor (SSC) structure, a new type of composite slide valve (CSV) has been proposed and designed, featuring internal volume ratios of 2.8, 3.9, and 5.6 and operating under a partial load of 35%. The theoretical model describing the dynamic features and thermodynamic performance of the SSC with CSV has also been built. The pressure ratio of the experimental system can be adjusted from 3.3 to 7.8, and the experimental results demonstrate the CSV's effective performance. The deviations between the calculated and measured results for volume ratio and input power are 3.33–9.08% and 0.32–8.03%, and the deviations for heating capacity and adiabatic efficiency range from 0.92–8.73% to 2.09–9.67%, respectively. The introduction of the CSV offers a novel approach to enhancing SSC efficiency. Both the theoretical and experimental findings lay a foundation for future optimization and design improvements in variable load and internal volumetric ratio single-screw compressors. [ABSTRACT FROM AUTHOR]

Molten salt is an excellent medium for heat transfer and storage. The unique microstructure of carbon nanomaterials leads to good mechanical stability, low density, high thermal conductivity, and high strength, etc. The addition of carbon nanomaterials to molten salt to form molten salt nanofluid can remarkably enhance the specific heat capacity and thermal conductivity of molten salt and reduce the molten salt viscosity, which is of great importance to increase the heat storage density and reduce the heat storage cost. Nevertheless, some challenges remain in the study of such nanofluids. The main challenge is the dispersion stability of carbon nanomaterials. Therefore, to improve research on carbon nanofluids, this paper summarizes the progress of carbon-based molten salt nanofluid research worldwide including the preparation methods of molten salt nanofluids, the improvement of heat transfer performance, and the improvement of heat storage performance. The effects of carbon nanoparticle concentration, size, and type on the heat transfer and storage performance of molten salt are derived, and the effects of nanoparticle shape on the heat transfer performance of molten salt are analyzed while more promising preparation methods for carbon-based molten salt nanofluids are proposed. In addition, the future problems that need to be solved for high-temperature molten salt-based carbon nanofluids are briefly discussed. [ABSTRACT FROM AUTHOR]

The performance of a heat exchanger is directly related to the energy conversion efficiency of the thermal storage system, and its optimal design is an important method to improve the performance of the heat exchanger. This paper uses the distributed parameter method to analyze the effect of the structural parameters and operating parameters of a heat exchanger on the entransy dissipation rate, the entransy dissipation number, the entransy dissipation heat resistance, entropy production rate, and entropy production number in a molten salt–supercritical CO2 concentric tube heat exchanger. The results show that the entransy dissipation rate and entropy production rate have the same trend, with the structural parameters and operating parameters, as well as the changes in the entransy dissipation number and entransy dissipation thermal resistance, jointly affected by the entransy dissipation rate and the heat exchange. Based on the above indicators, single-objective and multi-objective optimization calculations were carried out. The results show that taking the minimum entropy dissipation number, entransy dissipation heat resistance, and improved entropy production number as the objective functions, and using the heat transfer effectiveness as the evaluation index, the optimization effect is better. The ε value is increased by 41.2%, 39.5%, and 40.3% compared with the reference individual. In the multi-objective optimization, taking the minimum number of entransy dissipation and entropy production as the objective function, and using the efficiency of heat transfer and the pressure drop of the working fluid as the evaluation indicators, the optimization effect is better. Compared with the reference individual, the ε value increased by 23.5%, and Δ P h and Δ P c decreased by 51.9% and 32.5%, respectively. This study provides a reference for the optimization of supercritical CO2 heat exchangers by utilizing parameters such as entransy and entropy, which reflect the irreversible loss of the heat transfer process. [ABSTRACT FROM AUTHOR]