Search

In this work, a tube extrusion-shear-expanding (TESE) process was proposed to develop a high-performance magnesium alloy thin-walled tube, and then a comparison was made with the direct extrusion (DE) process. The microstructure and mechanical properties of magnesium alloy tubes under different processes were tested and analyzed. Numerical simulations were conducted by using DEFORMTM-3D software to predict the effective stresses, forming loads, and effective strains during the forming of magnesium alloy tubes. Compared with DE process, the TESE process with high effective stresses, effective strains, and forming loads generates a severe plastic deformation of the tube, leading to a more obvious grain refinement effect on the fabricated tube with a tensile strength of around 293 MPa and an elongation of around 15%. The results show that the TESE process has obvious advantages. The critical shear force and dynamic recrystallization further refine the grains and weaken the basal texture strength. The comprehensive performance of magnesium alloy tube is improved. [ABSTRACT FROM AUTHOR]

Context: The reaction between Na and HF is a typical harpooning reaction which is of great interest due to its significance in understanding the elementary chemical reaction kinetics. This work aims to investigate the detailed reaction mechanisms of sodium with hydrogen fluoride and the adsorption of HF on the resultant NaF as well as the (NaF)4 tetramer. The results suggest that the reaction between Na and HF leads to the formation of sodium fluoride salt NaF and hydrogen gas. Na interacts with HF to form a complex HF···Na, and then the approaching of F atom of HF to Na results in a transition state H···F···Na. Accompanied by the broken of H-F bond, the bond forms between F and Na atoms as NaF, then the product NaF is yielded due to the removal of H atom. The resultant NaF can further form (NaF)4 tetramer. The interaction of NaF with HF leads to the complex NaF···HF; the form I as well as II of (NaF)4 can interact with HF to produce two complexes (i.e., (NaF)4(I-1)···HF, (NaF)4(I-2)···HF, (NaF)4(II-1)···HF and (NaF)4(II-2)···HF), but the form III of (NaF)4 can interact with HF to produce only one complex (NaF)4(III)···HF. These complexes were explored in terms of noncovalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. NCI analyses confirm the existences of attractive interactions in the complexes HF···Na, NaF···HF, (NaF)4(I-1)···HF, (NaF)4(I-2)···HF, (NaF)4(II-1)···HF and (NaF)4(II-2)···HF, and (NaF)4(III)···HF. QTAIM analyses suggest that the F···Na interaction forms in the HF···Na complex while the F···H hydrogen bonds form in NaF···HF, (NaF)4(I-1)···HF, (NaF)4(I-2)···HF, (NaF)4(II-1)···HF and (NaF)4(II-2)···HF, and (NaF)4(III)···HF complexes. Natural bond orbital (NBO) analyses were also applied to analyze the intermolecular donor-acceptor orbital interactions in these complexes. These results would provide valuable insight into the chemical reaction of Na and HF and the adsorption interaction between sodium fluoride salt and HF. Methods: The calculations were carried out at the M06-L/6-311++G(2d,2p) level of theory which were performed using the Gaussian16 program. Intrinsic reaction coordinate (IRC) calculations were carried out at the same level of theory to confirm that the obtained transition state was true. The molecular surface electrostatic potential (MSEP) was employed to understand how the complex forms. Quantum theory of atoms in molecules (QTAIM) and noncovalent interaction (NCI) analysis was used to know the topology parameters at bond critical points (BCPs) and intermolecular interactions in the complex and intermediate. The topology parameters and the BCP plots were obtained by the Multiwfn software. [ABSTRACT FROM AUTHOR]

Cases of arthroscopic surgery have increased over the past two decades, and arthroscopic shaver systems have become a commonly used orthopedic tool. Nevertheless, most shavers generally have problems such as the cutting edge is not sharp enough and easy to wear. This paper aims to discuss the structural characteristics of BJKMC's (Bojin◊ Kinetic Medical) novel arthroscopic shaver, the double serrated blade. The product's design and verification process are outlined. BJKMC's articular arthroscopy shaver has a "tube in a tube" structure, comprising a stainless steel outer sleeve and a rotating hollow inner tube. The outer sleeve and inner tube have corresponding suction and cutting windows, and there are serrated teeth on the inner and outer casing. To verify the design rationality, it was compared to Dyonics◊'s equivalent product, the Incisor◊ Plus Blade. The appearance, cutting tool hardness, metal pipe roughness, cutting tool wall thickness, tooth profile, and angle, overall structure, and the key dimensions were examined and compared. Compared with Dyonics◊'s Incisor◊ Plus Blade, BJKMC's Double Serrated Blade had a smoother working surface, harder and thinner blade head. Therefore, BJKMC's product may have satisfactory performance when it comes to surgery. [ABSTRACT FROM AUTHOR]