Search

This paper investigates a low leakage power 8 T (LP8T) SRAM cell with high read and write stability. The proposed LP8T (PLP8T) SRAM cell has separate write and read bit lines. As an outcome, the read disturbance is removed. Furthermore, the utilization of a schmitt-trigger (ST) inverter enhances the read stability. Moreover, the write assist technique can enhance the writing ability. When compared to conventional-6 T SRAM, the PLP8T SRAM cell improves HSNM, RSNM, and WSNM by 1.4× 2.3 × and 1.3× respectively. The PLP8T SRAM's read and write access times are lowered by 53.24 and 42.18%, respectively. The PLP8T SRAM has a 50% lower read and write power than conventional-6 T SRAM. In addition, there will be a sufficient improvement when compared to chang10T, HSWA9T, SEDFC8TT, and ST11T SRAM cells. [ABSTRACT FROM AUTHOR]

Soft errors are the primary concern in space and terrestrial integrated circuit applications. When a charged particle from space collides with a scaled memory circuit, a transient pulse is generated across the sensitive storage node, causing a bit flip throughout the storage nodes. This bit flip is stated as a soft error, which affects the semiconductor memory architecture's stability and reliability. This paper presents a 10 T SRAM (STS-10 T) cell that mitigates soft error challenges even at space temperature. To demonstrate the relative performance of the STS-10 T, existing radiation-hardened memory cells, such as the Quatro-10 T, PS10T, NS-10 T, RHBD-10 T, 10 T-SRAM, RHMD-10 T, QUCCE-10 T, and SIS-10 T, were evaluated. The read stability of the proposed STS-10 T memory cell is 2.6x/ 3x/ 1.5x/ 1.4x/ 1.25x/ 1.6x/ 2.03 × greater than that of the existing Quatro-10 T/ NS-10 T/ PS-10 T/ RHBD-10 T/ RHMD-10 T/ QUCCE-10 T/ SIS-10 T memory cells, respectively. Moreover, 1.48x/ 1.17x/ 1.18x/ 1.4x/ 1.01x/ 1.27x/ 1.45x/ 1.43 × greater write ability than Quatro-10 T/ NS-10 T/ PS-10 T/ RHBD-10 T/ 10 T-SRAM/ RHMD-10 T/ QUCCE-10 T/ SIS10T. In addition, when the supply voltage is at 1 V, the read and write access time, hold power, and critical charge is also improved. [ABSTRACT FROM AUTHOR]

This paper proposes a modified Schmitt-trigger (ST)-based single-ended 11 T (MST11T) SRAM cell. The proposed cell is best suited to ultra-low voltage applications. Two ST-based cross-coupled inverters comprise the storage cell of the proposed MST11T bit cell. In comparison with conventional inverters, ST-based inverters have sharp voltage transfer characteristics. As a result, the proposed bit cell's stability performance increases. The proposed SRAM cell's leakage power consumption is reduced because of the use of stacked N-type transistors. For the read operation of the proposed bit cell, the read decoupled technique is used. As a result, the read static noise margin (RSNM) has greatly improved. The proposed bit cell's write static noise margin (WSNM) is increased by adopting feedback-cutting methodology. The performance of the proposed bit cell is compared with that of conventional 6 T, conventional 8 T, Schmitt-trigger 10 T (known as ST2), modified PMOS-PMOS-NMOS-based cell core 10 T (MPPN10T), feedback-cutting 11 T (FC11T), Schmitt-trigger 11 T (ST11), and Schmitt-trigger 12 T (ST12T) cells. According to the simulation results, the proposed MST11T SRAM cell has RSNM of 2.42, 1.18, 1.71, 1.30, and 1.80 times higher when compared to 6 T, FC11T, ST2, MPPN10T, and ST12T, respectively. The WSNM of the proposed bit cell has been increased by 1.56, 2.44, 1.28, 1.71, 1.35, 1.52, and 1.02 times, respectively, over 6 T, 8 T, ST2, MPPN10T, FC11T, ST11T, and ST12T. Furthermore, the suggested cell has a read delay that is 1.32, 1.79, and 1.53 times lower than ST11T, FC11T, and ST12T, respectively. The proposed bit cell has a write delay that is 1.14 and 1.63 times lower than FC11T and ST11T, respectively. The proposed MST11T bit-cell consumes 3.74, 1.56, 4.59, 5.38, and 4.83 times less leakage power than the 8 T, ST2, MPPN10T, FC11T, and ST12 bit-cells, respectively. When compared to 8 T/ST2/MPPN10T/ST12T at 0.2 V supply voltage, the enhanced facts incur a 4.87/3.79/3.78/1.97 penalty in write delay. The figure of merit (FOM) is derived as a result of this extensive access to the revolutionary SRAM cell performance, i.e., offering greater values at a 0.2 V DC supply voltage. In addition, the paper examines the impact of manufacturing process and temperature changes on MST11T cell enactment, as well as the circuit robustness using HSPICE with 7-nm FinFET technology. [ABSTRACT FROM AUTHOR]