Search

The anti‐migration ethylene propylene diene terpolymer (EPDM) inhibitor coating was prepared by using EPDM as a composite matrix and silicon‐functionalized graphene oxide (GO‐SiO2) as modifiers to prevent the migration of energetic plasticizers in propellants. The anti‐migration performance at different temperatures was analyzed by investigating the diffusion of dioctyl sebacate (DOS) using thermal analysis and immersion tests. After adding 1.0 wt% GO‐SiO2, the overall performance of the inhibitor coating was the best, and the concentration of DOS that migrated into the inhibitor coating at 30°C was reduced from 45.1% to 38.8% (13.9% decrease). The results confirmed that the introduction of GO‐SiO2 prevented the migration of dioctyl sebacate to the EPDM inhibitor coating. The scanning electron microscopy results showed that GO‐SiO2 was well‐dispersed in the inhibitor coating, and the tensile strength increased from 1.80 to 2.11 MPa. Migration kinetics analysis showed that the anti‐migration performance was closely related to the crosslink density. [ABSTRACT FROM AUTHOR]

In this paper, the ethylene propylene diene monomer (EPDM) was used as a composite matrix and octadecylamine‐functionalized graphene oxide (GA) was applied as insulation nanofiller to prevent plasticizer migration. To study the anti‐migration behavior of EPDM under plasticizer environment and different temperatures, we investigated the diffusion of dioctyl phthalate (DOP) in EPDM and its composites. The migration kinetics of DOP into EPDM composites with respect to filler and temperature were observed by the immersion absorption method. The process is dynamic and conforms to Fick's law. The composite show a 90% increase in tensile strength and 151% improvement in elongation at break by the addition of 5 phr filler of GA. Meanwhile, the EPDM/GA composite show an obviously improved anti‐migration performance, compared to pure EPDM at different temperatures, the composite show a 22.68%, 17.35%, 14.95%, 7.63% increase. Well layer‐structure of graphene offers a chance to improve the anti‐migration performance of insulation. [ABSTRACT FROM AUTHOR]