Search

Methylammonium chloride (MACl) additive is almost irreplaceable in high‐performance formamidine perovskite photovoltaics. Nevertheless, Some of the problems that can arise from adding MACl are rarely mentioned. Herein, it is proposed for the first time that the addition of MACl would cause the non‐stoichiometric ratio in the perovskite film, resulting in the halogen vacancy. It is demonstrated that the non‐synchronous volatilization of methylamine cations and chloride ions leads to the formation of halogen vacancy defects. To solve this problem, the NH4HCOO is introduced into the perovskite precursor solution to passivate the halogen vacancy. The HCOO− ions have a strong force with lead ions and can fill the halogen vacancy defects. Consequently, the champion devices' power conversion efficiency (PCE) can be improved from 21.23% to 23.72% with negligible hysteresis. And the unencapsulated device can still retain >90% of the initial PCE even operating in N2 atmosphere for over 1200 h. This work illustrates another halogen defect source in the MACl‐assisted formamidine perovskite photovoltaics and provides a new route to obtain high‐performance perovskite solar cells. [ABSTRACT FROM AUTHOR]

Electron transport layers (ETLs) are crucial for achieving efficient and stable planar perovskite solar cells (PSCs). Reports on versatile inorganic ETLs using a simple film fabrication method and applicability for both low‐cost planar regular and inverted PSCs with excellent efficiencies (>22%) and high stability are very limited. Herein, we employ a novel inorganic ZnSe as ETL for both regular and inverted PSCs to improve the efficiency and stability using a simple thermal evaporation method. The TiO2‐ZnSe‐FAPbI3 heterojunction could be formed, resulting in an improved charge collection and a decreased carrier recombination further proved through theoretical calculations. The optimized regular PSCs based on TiO2/ZnSe have achieved 23.25% efficiency with negligible hysteresis. In addition, the ZnSe ETL can also effectively replace the unstable bathocuproine (BCP) in inverted PSCs. Consequently, the ZnSe‐based inverted device realizes a champion efficiency of 22.54%. Moreover, the regular device comprising the TiO2/ZnSe layers retains 92% of its initial PCE after 10:00 h under 1 Sun continuous illumination and the inverted device comprising the C60/ZnSe layers maintains over 85% of its initial PCE at 85 °C for 10:00 h. This highlights one of the best results among universal ETLs in both regular and inverted perovskite photovoltaics. [ABSTRACT FROM AUTHOR]

The perovskite photovoltaic field has developed rapidly within a decade. In particular, formamidinium (FA)‐rich perovskite allows a broad absorption spectrum, and is considered to be one of the most promising perovskite materials. Great progress has been achieved, and most recorded high‐efficient perovskite solar cells (PSCs) used the FA‐rich perovskite light absorption layer. However, the black α‐phase formamidinium lead iodide (FAPbI3) perovskite easily transforms into an undesirable δ‐phase at a low temperature. Thus, researchers have put a lot of effort into deeply understanding the phase transformation and stabilization mechanism of FA‐rich perovskite. Herein, the fundamental physical properties of FAPbI3 materials, including crystal structure, phase‐transition temperature, charge‐carrier dynamics, etc. are summarized, and establish a complete phase evolution with temperature by reviewing previous reports. The intrinsic and external factors are subsequently discussed for influencing the stability of FAPbI3 perovskite and the remarkable breakthroughs of FA‐rich PSCs in recent years are reviewed. Moreover, a series of strategies to stabilize FA‐rich perovskite is summarized, including but not limited to compositional engineering, passivating engineering, processing engineering, and strain engineering. Finally, several new viewpoints are provided for improving the efficiency and stability of PSCs. This review may be regarded as a reference project for preparing high‐efficient and stable perovskite photovoltaic devices. [ABSTRACT FROM AUTHOR]