Search

There is increasing focus on applying deep learning methods to electrocardiograms (ECGs), with recent studies showing that neural networks (NNs) can predict future heart failure or atrial fibrillation from the ECG alone. However, large numbers of ECGs are needed to train NNs, and many ECGs are currently only in paper format, which are not suitable for NN training. We developed a fully-automated online ECG digitisation tool to convert scanned paper ECGs into digital signals. Using automated horizontal and vertical anchor point detection, the algorithm automatically segments the ECG image into separate images for the 12 leads and a dynamical morphological algorithm is then applied to extract the signal of interest. We then validated the performance of the algorithm on 515 digital ECGs, of which 45 were printed, scanned and redigitised. The automated digitisation tool achieved 99.0% correlation between the digitised signals and the ground truth ECG (n = 515 standard 3-by-4 ECGs) after excluding ECGs with overlap of lead signals. Without exclusion, the performance of average correlation was from 90 to 97% across the leads on all 3-by-4 ECGs. There was a 97% correlation for 12-by-1 and 3-by-1 ECG formats after excluding ECGs with overlap of lead signals. Without exclusion, the average correlation of some leads in 12-by-1 ECGs was 60–70% and the average correlation of 3-by-1 ECGs achieved 80–90%. ECGs that were printed, scanned, and redigitised, our tool achieved 96% correlation with the original signals. We have developed and validated a fully-automated, user-friendly, online ECG digitisation tool. Unlike other available tools, this does not require any manual segmentation of ECG signals. Our tool can facilitate the rapid and automated digitisation of large repositories of paper ECGs to allow them to be used for deep learning projects. [ABSTRACT FROM AUTHOR]

The electrocardiogram (ECG) signal describes the heart's electrical activity, allowing it to detect several health conditions, including cardiac system abnormalities and dysfunctions. Nowadays, most patient medical records are still paper-based, especially those made in past decades. The importance of collecting digitized ECGs is twofold: firstly, all medical applications can be easily implemented with an engineering approach if the ECGs are treated as signals; secondly, paper ECGs can deteriorate over time, therefore a correct evaluation of the patient's clinical evolution is not always guaranteed. The goal of this paper is the realization of an automatic conversion algorithm from paper-based ECGs (images) to digital ECG signals. The algorithm involves a digitization process tested on an image set of 16 subjects, also with pathologies. The quantitative analysis of the digitization method is carried out by evaluating the repeatability and reproducibility of the algorithm. The digitization accuracy is evaluated both on the entire signal and on six ECG time parameters (R-R peak distance, QRS complex duration, QT interval, PQ interval, P-wave duration, and heart rate). Results demonstrate the algorithm efficiency has an average Pearson correlation coefficient of 0.94 and measurement errors of the ECG time parameters are always less than 1 mm. Due to the promising experimental results, the algorithm could be embedded into a graphical interface, becoming a measurement and collection tool for cardiologists. [ABSTRACT FROM AUTHOR]

One of the most widely used measures of scientific impact is the number of citations. However, due to its heavy-tailed distribution, citations are fundamentally difficult to predict but can be improved. This study was aimed at investigating the factors and parts influencing the citation number of a scientific paper in the otology field. Therefore, this work proposes a new solution that utilizes machine learning and natural language processing to process English text and provides a paper citation as the predicted results. Different algorithms are implemented in this solution, such as linear regression, boosted decision tree, decision forest, and neural networks. The application of neural network regression revealed that papers' abstracts have more influence on the citation numbers of otological articles. This new solution has been developed in visual programming using Microsoft Azure machine learning at the back end and Programming Without Coding Technology at the front end. We recommend using machine learning models to improve the abstracts of research articles to get more citations. [ABSTRACT FROM AUTHOR]

This special issue contains six revised and extended versions of tool papers that appeared in the proceedings of TACAS 2021, the 27th International Conference on Tools and Algorithms for the Construction and Analysis of Systems. The issue is dedicated to the realization of algorithms in tools and the studies of the application of these tools for analysing hard- and software systems. [ABSTRACT FROM AUTHOR]

The traditional method for transformer moisture diagnosis is to establish empirical equations between feature parameters extracted from frequency domain spectroscopy (FDS) and the transformer’s moisture content. However, the established empirical equation may not be applicable to a novel testing environment, resulting in an unreliable evaluation result. In this regard, it is acknowledged that FDS combined with machine learning is more suitable for estimating moisture content in a variety of test environments. Nonetheless, the accuracy of the estimation results obtained using the existing method is limited by the algorithm’s inability to generalize. To address this issue, we propose an AdaBoost algorithm-enhanced back-propagation neural network (BP_AdaBoost). This study creates a database by extracting feature parameters from the FDS that characterize the insulation states of the prepared samples. Then, using the BP_AdaBoost algorithm and the newly constructed database, the moisture estimation models are trained. Finally, the results of the estimation are discussed in terms of laboratory and field transformers. By comparing the proposed BP_AdaBoost algorithm to other intelligence algorithms, it is demonstrated that it not only performs better in generalization, but also maintains a high level of accuracy. [ABSTRACT FROM AUTHOR]

We study the quadratic cycle cover problem (QCCP), which aims to find a node-disjoint cycle cover in a directed graph with minimum interaction cost between successive arcs. We derive several semidefinite programming (SDP) relaxations and use facial reduction to make these strictly feasible. We investigate a nontrivial relationship between the transformation matrix used in the reduction and the structure of the graph, which is exploited in an efficient algorithm that constructs this matrix for any instance of the problem. To solve our relaxations, we propose an algorithm that incorporates an augmented Lagrangian method into a cutting-plane framework by utilizing Dykstra's projection algorithm. Our algorithm is suitable for solving SDP relaxations with a large number of cutting-planes. Computational results show that our SDP bounds and efficient cutting-plane algorithm outperform other QCCP bounding approaches from the literature. Finally, we provide several SDP-based upper bounding techniques, among which is a sequential Q-learning method that exploits a solution of our SDP relaxation within a reinforcement learning environment. Summary of Contribution: The quadratic cycle cover problem (QCCP) is the problem of finding a set of node-disjoint cycles covering all the nodes in a graph such that the total interaction cost between successive arcs is minimized. The QCCP has applications in many fields, among which are robotics, transportation, energy distribution networks, and automatic inspection. Besides this, the problem has a high theoretical relevance because of its close connection to the quadratic traveling salesman problem (QTSP). The QTSP has several applications, for example, in bioinformatics, and is considered to be among the most difficult combinatorial optimization problems nowadays. After removing the subtour elimination constraints, the QTSP boils down to the QCCP. Hence, an in-depth study of the QCCP also contributes to the construction of strong bounds for the QTSP. In this paper, we study the application of semidefinite programming (SDP) to obtain strong bounds for the QCCP. Our strongest SDP relaxation is very hard to solve by any SDP solver because of the large number of involved cutting-planes. Because of that, we propose a new approach in which an augmented Lagrangian method is incorporated into a cutting-plane framework by utilizing Dykstra's projection algorithm. We emphasize an efficient implementation of the method and perform an extensive computational study. This study shows that our method is able to handle a large number of cuts and that the resulting bounds are currently the best QCCP bounds in the literature. We also introduce several upper bounding techniques, among which is a distributed reinforcement learning algorithm that exploits our SDP relaxations. [ABSTRACT FROM AUTHOR]

Machine learning (ML), a form of artificial intelligence (AI), is being increasingly employed in neurology. Reported performance metrics often match or exceed the efficiency of average clinicians. The neurologist is easily baffled by the underlying concepts and terminologies associated with ML studies. The superlative performance metrics of ML algorithms often hide the opaque nature of its inner workings. Questions regarding ML model's interpretability and reproducibility of its results in real-world scenarios, need emphasis. Given an abundance of time and information, the expert clinician should be able to deliver comparable predictions to ML models, a useful benchmark while evaluating its performance. Predictive performance metrics of ML models should not be confused with causal inference between its input and output. ML and clinical gestalt should compete in a randomized controlled trial before they can complement each other for screening, triaging, providing second opinions and modifying treatment. [ABSTRACT FROM AUTHOR]

The present paper is in two folds. In the first fold, we prove the Lipschitz continuity of the proximal mapping associated with a general strongly H-monotone mapping and compute an estimate of its Lipschitz constant under some mild assumptions imposed on the mapping H involved in the proximal mapping. We provide two examples to show that a maximal monotone mapping need not be a general H-monotone for a single-valued mapping H from a Banach space to its dual space. A class of multi-valued nonlinear variational inclusion problems is considered, and by using the notion of proximal mapping and Nadler's technique, an iterative algorithm with mixed errors is suggested to compute its solutions. Under some appropriate hypotheses imposed on the mappings and parameters involved in the multi-valued nonlinear variational inclusion problem, the strong convergence of the sequences generated by the proposed algorithm to a solution of the aforesaid problem is verified. The second fold of this paper investigates and analyzes the notion of Cn-monotone mappings defined and studied in [S.Z. Nazemi, A new class of monotone mappings and a new class of variational inclusions in Banach spaces, J. Optim. Theory Appl. 155(3)(2012) 785-795]. Several comments related to the results and algorithm appeared in the above mentioned paper are given. [ABSTRACT FROM AUTHOR]

The advancement of new energy vehicles has led to more demanding standards for detecting defects in cylindrical coated lithium batteries. The current research lacks robustness and has low performance. This paper seeks to provide real-time defect identification in cylindrical coated lithium batteries and improve the object detection method of the YOLOv5s model. This paper presents an MGSEC3 module with multi-scale feature extraction and integration of the SENet network in the YOLOv5 Backbone network. This module aims to reduce computational burden and enhance feature extraction efficiency as much as possible. At the same time, the CARAFE operator is utilized to enhance the up-sampling operator in order to reduce the loss of feature information. In addition, enhancements to the loss function enhance both the detection performance and convergence speed. The enhanced YOLOv5s model achieved an average detection rate of 82.4% on the custom cylindrical coated lithium battery dataset, 2.3% higher than the original YOLOv5s. This paper significantly enhances the precision and efficiency of flaw identification in cylindrical coated lithium batteries. [ABSTRACT FROM AUTHOR]

The problem of finding optimal block designs can be formulated as a combinatorial optimization, but its resolution is still a formidable challenge. This paper presents a general and user-friendly algorithm, namely Modified Particle Swarm Optimization (MPSO), to construct optimal or near-optimal block designs. It can be used for several classes of block designs such as binary, non-binary and test-control block designs with correlated or uncorrelated observations. In order to evaluate the algorithm, we compare our results with the optimal designs presented in some published papers. An advantage of our algorithm is its independency to the sizes of blocks and the structure of correlations. [ABSTRACT FROM AUTHOR]

This paper aims to map out how the field of dynamic capabilities has developed since the seminal studies by Teece et al. (1997) and Eisenhardt and Martin (2000). We identified 10,838 papers and used the Latent Dirichlet Allocation algorithm for topic modeling. We conducted two analyses: the first was based on the temporality and characteristics of the studies; the second was interpretative and based on the network of theoretical concepts. Results indicate an approximation between the ideas of the two seminal studies, which were initially viewed as opposite. We observe a movement to value relational issues, following a collective construction path, and paying less attention to the firm itself. Overall, we were able to understand the consolidation of the dynamic capabilities field; understand the core elements involved in the development of dynamic capabilities; set out the original and current concepts of dynamic capabilities; and indicate tendencies and a possible future research agenda. [ABSTRACT FROM AUTHOR]

This paper delves into the problem of direct position determination (DPD) for non-Gaussian sources. Existing DPD algorithms are hindered by their high computational complexity from exhaustive grid searches and a disregard for the received signal characteristics by multiple nested arrays (MNAs). To address these issues, the paper proposes a novel DPD algorithm for non-Gaussian sources with MNAs: the Discrete Fourier Transform (DFT) and Taylor compensation algorithm. Initially, the fourth-order cumulant matrix of the received signal is computed, and the vectorizing method is applied. Subsequently, a computationally efficient DPD cost function is proposed by leveraging a normalized DFT matrix to reduce complexity. Finally, first-order Taylor compensation is utilized to enhance the accuracy of the localization results. The superiority of the proposed algorithm is demonstrated through numerical simulation results. [ABSTRACT FROM AUTHOR]

Advances in computer image recognition have significantly impacted many industries, including healthcare, security and autonomous systems. This paper aims to explore the potential of improving image algorithms to enhance computer image recognition. Specifically, we will focus on regression methods as a means to improve the accuracy and efficiency of identifying images. In this study, we will analyze various regression techniques and their applications in computer image recognition, as well as the resulting performance improvements through detailed examples and data analysis. This paper deals with the problems related to visual image processing in outdoor unstructured environment. Finally, the heterogeneous patterns are converted into the same pattern, and the heterogeneous patterns are extracted from the fusion features of data modes. The simulation results show that the perception ability and recognition ability of outdoor image recognition in complex environment are improved. [ABSTRACT FROM AUTHOR]

In recent years, with the development of low‐earth orbit broadband satellites, the combination of multi‐path transmission and software‐defined networking (SDN) for satellite networks has seen rapid advancement. The integration of SDN and multi‐path transmission contributes to improving the efficiency of transmission and reducing network congestion. However, the current SDN controllers do not support the multi‐path QUIC protocol (MPQUIC), and the routing algorithm used in current satellite networks based on minimum hop count struggles to meet the real‐time requirements for some applications. Therefore, this paper designs and implements an SDN controller that supports the MPQUIC protocol and proposes a multi‐objective optimization‐based routing algorithm. This algorithm selects paths with lower propagation delays and higher available bandwidth for subflow transmission to improve transmission throughput. Considering the high‐speed mobility of satellite nodes and frequent link switching, this paper also designs a flow table update algorithm based on the predictability of satellite network topology. It enables proactive rerouting upon link switching, ensuring stable transmission. The performance of the proposed solution is evaluated through satellite network simulation environments. The experimental results highlight that SDN‐MPQUIC significantly improves performance metrics: it reduces average completion time by 37.3% to 59.3% compared to QSMPS and by 52.8% to 72.4% compared to Disjoint for files with different sizes. Additionally, SDN‐MPQUIC achieves an average throughput improvement of 81.4% compared to QSMPS and 147.8% compared to Disjoint, while demonstrating a 26.3% lower retransmission rate than QSMPS. [ABSTRACT FROM AUTHOR]

Buildings are significant components of digital cities, and their precise extraction is essential for the three-dimensional modeling of cities. However, it is difficult to accurately extract building features effectively in complex scenes, especially where trees and buildings are tightly adhered. This paper proposes a highly accurate building point cloud extraction method based solely on the geometric information of points in two stages. The coarsely extracted building point cloud in the first stage is iteratively refined with the help of mask polygons and the region growing algorithm in the second stage. To enhance accuracy, this paper combines the Alpha Shape algorithm with the neighborhood expansion method to generate mask polygons, which help fill in missing boundary points caused by the region growing algorithm. In addition, this paper performs mask extraction on the original points rather than non-ground points to solve the problem of incorrect identification of facade points near the ground using the cloth simulation filtering algorithm. The proposed method has shown excellent extraction accuracy on the Urban-LiDAR and Vaihingen datasets. Specifically, the proposed method outperforms the PointNet network by 20.73% in precision for roof extraction of the Vaihingen dataset and achieves comparable performance with the state-of-the-art HDL-JME-GGO network. Additionally, the proposed method demonstrated high accuracy in extracting building points, even in scenes where buildings were closely adjacent to trees. [ABSTRACT FROM AUTHOR]

Effective nonlinear control of manipulators with dynamically coupled arms, like those with direct drives, is the subject of the paper. Model-based predictive control (MPC) algorithms with nonlinear state-space models and most recent disturbance attenuation technique are proposed. This technique makes controller design and online calculations simpler, avoiding necessity of dynamic modeling of disturbances or resorting to additional techniques like SMC. The core of the paper are computationally effective MPC-NPL (Nonlinear Prediction and Linearization) algorithms, where computations at every sample are divided into two parts: prediction of initial trajectories using nonlinear model, then optimization using simplified linearized model. For a comparison, a known CTC-PID algorithm, which is also model-based, is considered. It is applied in standard form and also proposed in more advanced CTC-PID2dof version. For all algorithms a comprehensive comparative simulation study is performed, for a direct drive manipulator under disturbances. Additional contribution of the paper is investigation of influence of sampling period and of computational delay time on performance of the algorithms, which is practically important when using model-based algorithms with fast sampling. [ABSTRACT FROM AUTHOR]

Train wheels are crucial components for ensuring the safety of trains. The accurate and fast identification of wheel tread defects is necessary for the timely maintenance of wheels, which is essential for achieving the premise of conditional repair. Image-based detection methods are commonly used for detecting tread defects, but they still have issues with the misdetection of water stains and the leaking of small defects. In this paper, we address the challenges posed by the detection of wheel tread defects by proposing improvements to the YOLOv8 model. Firstly, the impact of water stains on tread defect detection is avoided by optimising the structure of the detection layer. Secondly, an improved SPPCSPC module is introduced to enhance the detection of small targets. Finally, the SIoU loss function is used to accelerate the convergence speed of the network, which ensures defect recognition accuracy with high operational efficiency. Validation was performed on the constructed tread defect dataset. The results demonstrate that the enhanced YOLOv8 model in this paper outperforms the original network and significantly improves the tread defect detection indexes. The average precision, accuracy, and recall reached 96.95%, 96.30%, and 95.31%. [ABSTRACT FROM AUTHOR]

A charge and discharge management scheme is proposed. The stored electric energy in distributed storage devices will converge to the consistent. The consistency of the stored electric energy of the devices helps to maintain the maximum load capacity and maximum consumption capacity of distributed storage devices. The charging and discharging process is constructed as a time-varying optimization problem, and the proposed algorithm can respond to the time-varying parameters of the distributed storage devices in real time. The time-varying neurodynamic algorithms can obtain time-varying optimal solution trajectories to give the optimal charging and discharging strategy in real time. In addition, the proposed approach in this paper focuses on the privacy protection of device data. Each device can calculate the power of discharging or charging by communicating with the partially connected nodes. Numerical simulations of the proposed scheme in the paper are given to verify the effectiveness of the scheme. Numerical simulations show that our scheme can make the electric energy stored in each storage device converge and maintain the maximum load capacity or maximum consumption capacity of the whole distributed storage device. [ABSTRACT FROM AUTHOR]

Communication security has become particularly crucial with the rapid development of the Internet of Things (IoT). Frequency hopping spread spectrum (FHSS) technology, a prevalent method in wireless communication, has a wide range of applications in the Internet of Things. Enhancing the security of frequency hopping sequences is an essential means to improve the security of frequency hopping communication in the Internet of Things, as the performance of frequency hopping sequences plays a crucial role in frequency hopping systems. This paper proposes constructing secure adaptive frequency hopping sequence sets based on the advanced encryption standard (AES) algorithm. As a block cipher algorithm with superior security, the AES algorithm can provide a fundamental guarantee for the security of the proposed frequency hopping sequences. The mapping methods from ciphertext sequences to frequency hopping sequences proposed in this paper can achieve the construction of frequency hopping sequences of any frequency set size to meet the requirements of adaptive frequency hopping. In addition, we also model and analyse the problem of overlapping spectrum band of the IoT groups in the industrial, scientific, and medical (ISM) band, aiming to achieve better packet transmission performance by adjusting the frequency set size. [ABSTRACT FROM AUTHOR]

In response to the numerous challenges faced by traditional human pose recognition methods in practical applications, such as dense targets, severe edge occlusion, limited application scenarios, complex backgrounds, and poor recognition accuracy when targets are occluded, this paper proposes a YOLO-Pose algorithm for human pose estimation. The specific improvements are divided into four parts. Firstly, in the Backbone section of the YOLO-Pose model, lightweight GhostNet modules are introduced to reduce the model's parameter count and computational requirements, making it suitable for deployment on unmanned aerial vehicles (UAVs). Secondly, the ACmix attention mechanism is integrated into the Neck section to improve detection speed during object judgment and localization. Furthermore, in the Head section, key points are optimized using coordinate attention mechanisms, significantly enhancing key point localization accuracy. Lastly, the paper improves the loss function and confidence function to enhance the model's robustness. Experimental results demonstrate that the improved model achieves a 95.58% improvement in mAP50 and a 69.54% improvement in mAP50-95 compared to the original model, with a reduction of 14.6 M parameters. The model achieves a detection speed of 19.9 ms per image, optimized by 30% and 39.5% compared to the original model. Comparisons with other algorithms such as Faster R-CNN, SSD, YOLOv4, and YOLOv7 demonstrate varying degrees of performance improvement. [ABSTRACT FROM AUTHOR]

* Context.--Automated prostate cancer detection using machine learning technology has led to speculation that pathologists will soon be replaced by algorithms. This review covers the development of machine learning algorithms and their reported effectiveness specific to prostate cancer detection and Gleason grading. Objective.--To examine current algorithms regarding their accuracy and classification abilities. We provide a general explanation of the technology and how it is being used in clinical practice. The challenges to the application of machine learning algorithms in clinical practice are also discussed. Data Sources.--The literature for this review was identified and collected using a systematic search. Criteria were established prior to the sorting process to effectively direct the selection of studies. A 4-point system was implemented to rank the papers according to their relevancy. For papers accepted as relevant to our metrics, all cited and citing studies were also reviewed. Studies were then categorized based on whether they implemented binary or multi-class classification methods. Data were extracted from papers that contained accuracy, area under the curve (AUC), or κ values in the context of prostate cancer detection. The results were visually summarized to present accuracy trends between classification abilities. Conclusions.--It is more difficult to achieve high accuracy metrics for multiclassification tasks than for binary tasks. The clinical implementation of an algorithm that can assign a Gleason grade to clinical whole slide images (WSIs) remains elusive. Machine learning technology is currently not able to replace pathologists but can serve as an important safeguard against misdiagnosis. [ABSTRACT FROM AUTHOR]

Underwater acoustic (UWA) channel prediction technology, as an important topic in UWA communication, has played an important role in UWA adaptive communication network and underwater target perception. Although many significant advancements have been achieved in underwater acoustic channel prediction over the years, a comprehensive summary and introduction is still lacking. As the first comprehensive overview of UWA channel prediction, this paper introduces past works and algorithm implementation methods of channel prediction from the perspective of linear, kernel-based, and deep learning approaches. Importantly, based on available at-sea experiment datasets, this paper compares the performance of current primary UWA channel prediction algorithms under a unified system framework, providing researchers with a comprehensive and objective understanding of UWA channel prediction. Finally, it discusses the directions and challenges for future research. The survey finds that linear prediction algorithms are the most widely applied, and deep learning, as the most advanced type of algorithm, has moved this field into a new stage. The experimental results show that the linear algorithms have the lowest computational complexity, and when the training samples are sufficient, deep learning algorithms have the best prediction performance. [ABSTRACT FROM AUTHOR]

The latent block model is used to simultaneously rank the rows and columns of a matrix to reveal a block structure. The algorithms used for estimation are often time consuming. However, recent work shows that the log-likelihood ratios are equivalent under the complete and observed (with unknown labels) models and the groups posterior distribution to converge as the size of the data increases to a Dirac mass located at the actual groups configuration. Based on these observations, the algorithm Largest Gaps is proposed in this paper to perform clustering using only the marginals of the matrix, when the number of blocks is very small with respect to the size of the whole matrix in the case of binary data. In addition, a model selection method is incorporated with a proof of its consistency. Thus, this paper shows that studying simplistic configurations (few blocks compared to the size of the matrix or very contrasting blocks) with complex algorithms is useless since the marginals already give very good parameter and classification estimates. [ABSTRACT FROM AUTHOR]

In decentralized systems, the quest for heightened security and integrity within blockchain networks becomes an issue. This survey investigates anomaly detection techniques in blockchain ecosystems through the lens of unsupervised learning, delving into the intricacies and going through the complex tapestry of abnormal behaviors by examining avant-garde algorithms to discern deviations from normal patterns. By seamlessly blending technological acumen with a discerning gaze, this survey offers a perspective on the symbiotic relationship between unsupervised learning and anomaly detection by reviewing this problem with a categorization of algorithms that are applied to a variety of problems in this field. We propose that the use of unsupervised algorithms in blockchain anomaly detection should be viewed not only as an implementation procedure but also as an integration procedure, where the merits of these algorithms can effectively be combined in ways determined by the problem at hand. In that sense, the main contribution of this paper is a thorough study of the interplay between various unsupervised learning algorithms and how this can be used in facing malicious activities and behaviors within public and private blockchain networks. The result is the definition of three categories, the characteristics of which are recognized in terms of the way the respective integration takes place. When implementing unsupervised learning, the structure of the data plays a pivotal role. Therefore, this paper also provides an in-depth presentation of the data structures commonly used in unsupervised learning-based blockchain anomaly detection. The above analysis is encircled by a presentation of the typical anomalies that have occurred so far along with a description of the general machine learning frameworks developed to deal with them. Finally, the paper spotlights challenges and directions that can serve as a comprehensive compendium for future research efforts. [ABSTRACT FROM AUTHOR]

This paper addresses the following problem: given m potential observations to determine n parameters, m > n , what is the best choice of n observations. The problem can be formulated as finding the n × n submatrix of the complete m × n observation matrix that has maximum determinant. An algorithm by Gu and Eisenstat for a determining a strongly rank-revealing QR factorisation of a matrix can be adapted to address this latter formulation. The algorithm starts with an initial selection of n rows of the observation matrix and then performs a sequence of row interchanges, with the determinant of the current submatrix strictly increasing at each step until no further improvement can be made. The algorithm implements rank-one updating strategies, which leads to a compact and efficient algorithm. The algorithm does not necessarily determine the global optimum but provides a practical approach to designing an effective measurement strategy. In this paper, we describe how the Gu–Eisenstat algorithm can be adapted to address the problem of optimal experimental design and used with the QR algorithm with column pivoting to provide effective designs. We also describe implementations of sequential algorithms to add further measurements that optimise the information gain at each step. We illustrate performance on several metrology examples. [ABSTRACT FROM AUTHOR]

This paper presents an improved swarming algorithm that enhances low-illumination images. The algorithm combines a hybrid Harris Eagle algorithm with double gamma (IHHO-BIGA) and incomplete beta (IHHO-NBeta) functions. This paper integrates the concept of symmetry into the improvement steps of the image adaptive enhancement algorithm. The enhanced algorithm integrates chaotic mapping for population initialization, a nonlinear formula for prey energy calculation, spiral motion from the black widow algorithm for global search enhancement, a nonlinear inertia weight factor inspired by particle swarm optimization, and a modified Levy flight strategy to prevent premature convergence to local optima. This paper compares the algorithm's performance with other swarm intelligence algorithms using commonly used test functions. The algorithm's performance is compared against several emerging swarm intelligence algorithms using commonly used test functions, with results demonstrating its superior performance. The improved Harris Eagle algorithm is then applied for image adaptive enhancement, and its effectiveness is evaluated on five low-illumination images from the LOL dataset. The proposed method is compared to three common image enhancement techniques and the IHHO-BIGA and IHHO-NBeta methods. The experimental results reveal that the proposed approach achieves optimal visual perception and enhanced image evaluation metrics, outperforming the existing techniques. Notably, the standard deviation data of the first image show that the IHHO-NBeta method enhances the image by 8.26%, 120.91%, 126.85%, and 164.02% compared with IHHO-BIGA, the single-scale Retinex enhancement method, the homomorphic filtering method, and the limited contrast adaptive histogram equalization method, respectively. The processing time of the improved method is also better than the previous heuristic algorithm. [ABSTRACT FROM AUTHOR]

A deep learning-based Visual Inertial SLAM technique is proposed in this paper to ensure accurate autonomous localization of mobile robots in environments with dynamic objects. Addressing the limitations of real-time performance in deep learning algorithms and the poor robustness of pure visual geometry algorithms, this paper presents a deep learning-based Visual Inertial SLAM technique. Firstly, a non-blocking model is designed to extract semantic information from images. Then, a motion probability hierarchy model is proposed to obtain prior motion probabilities of feature points. For image frames without semantic information, a motion probability propagation model is designed to determine the prior motion probabilities of feature points. Furthermore, considering that the output of inertial measurements is unaffected by dynamic objects, this paper integrates inertial measurement information to improve the estimation accuracy of feature point motion probabilities. An adaptive threshold-based motion probability estimation method is proposed, and finally, the positioning accuracy is enhanced by eliminating feature points with excessively high motion probabilities. Experimental results demonstrate that the proposed algorithm achieves accurate localization in dynamic environments while maintaining real-time performance. [ABSTRACT FROM AUTHOR]

Peer-to-peer (P2P) energy trading has attracted a lot of attention and the number of electric vehicles (EVs) has increased in the past couple of years. Toward sustainable mobility, EVs meet the standard development goals (SDGs) for attaining a sustainable future in the transport sector. This development and increasing number of EVs creates an opportunity for prosumers to trade electricity. Considering this opportunity, this review article aims to provide an in-depth analysis of P2P energy trading of EVs using blockchain in centralized and decentralized networks, which enables prosumers to exchange energy directly with one another. The paper is aimed to provide the reader with a state-of-the-art review on the P2P energy trading for EVs, considering different blockchain algorithms that are practically implemented or still in the research phase. Moreover, the paper presents blockchain applications, current trends, and future challenges of EVs' energy trading. P2P energy trading for EVs using blockchain algorithms can be successfully implemented considering real-time scenarios and economically benefits smart sustainable societies. [ABSTRACT FROM AUTHOR]

In response to the challenges posed by small objects in remote sensing images, such as low resolution, complex backgrounds, and severe occlusions, this paper proposes a lightweight improved model based on YOLOv8n. During the detection of small objects, the feature fusion part of the YOLOv8n algorithm retrieves relatively fewer features of small objects from the backbone network compared to large objects, resulting in low detection accuracy for small objects. To address this issue, firstly, this paper adds a dedicated small object detection layer in the feature fusion network to better integrate the features of small objects into the feature fusion part of the model. Secondly, the SSFF module is introduced to facilitate multi-scale feature fusion, enabling the model to capture more gradient paths and further improve accuracy while reducing model parameters. Finally, the HPANet structure is proposed, replacing the Path Aggregation Network with HPANet. Compared to the original YOLOv8n algorithm, the recognition accuracy of mAP@0.5 on the VisDrone data set and the AI-TOD data set has increased by 14.3% and 17.9%, respectively, while the recognition accuracy of mAP@0.5:0.95 has increased by 17.1% and 19.8%, respectively. The proposed method reduces the parameter count by 33% and the model size by 31.7% compared to the original model. Experimental results demonstrate that the proposed method can quickly and accurately identify small objects in complex backgrounds. [ABSTRACT FROM AUTHOR]

Letter to the Editor concerning "Describing center of pressure movement in stabilometry by ellipse area approximation" from Agnieszka Golab. Reply to "Describing center of pressure movement in stabilometry by ellipse area approximation" from Agnieszka Golab concerning the paper "A Review of Center of Pressure (COP) Variables to Quantify Standing Balance in Elderly People: Algorithms and Open Access Code" Our choice was actually to present the formula of the prediction ellipse area in the article, as it indeed does not strongly depend on the sample size as the confidence ellipse area does. [Extracted from the article]

Differential Evolution (DE) is widely recognized as a highly effective evolutionary algorithm for global optimization. It has proven its efficacy in tackling diverse problems across various fields and real-world applications. DE boasts several advantages, such as ease of implementation, reliability, speed, and adaptability. However, DE does have certain limitations, such as suboptimal solution exploitation and challenging parameter tuning. To address these challenges, this research paper introduces a novel algorithm called Enhanced Binary JADE (EBJADE), which combines differential evolution with multi-population and elites regeneration. The primary innovation of this paper lies in the introduction of strategy with enhanced exploitation capabilities. This strategy is based on utilizing the sorting of three vectors from the current generation to perturb the target vector. By introducing directional differences, guiding the search towards improved solutions. Additionally, this study adopts a multi-population method with a rewarding subpopulation to dynamically adjust the allocation of two different mutation strategies. Finally, the paper incorporates the sampling concept of elite individuals from the Estimation of Distribution Algorithm (EDA) to regenerate new solutions through the selection process in DE. Experimental results, using the CEC2014 benchmark tests, demonstrate the strong competitiveness and superior performance of the proposed algorithm. [ABSTRACT FROM AUTHOR]

To ensure the long-term stable and uninterrupted service of satellite navigation systems, the robustness and reliability of time–frequency systems are crucial. Integrity monitoring is an effective method to enhance the robustness and reliability of time–frequency systems. Time–frequency signals are fundamental for integrity monitoring, with their time differences and frequency biases serving as essential indicators. These indicators are influenced by the inherent characteristics of the time–frequency signals, as well as the links and equipment they traverse. Meanwhile, existing research primarily focuses on only monitoring the integrity of the time–frequency signals' output by the atomic clock group, neglecting the integrity monitoring of the time–frequency signals generated and distributed by the time–frequency signal generation and distribution subsystem. This paper introduces a time–frequency signal integrity monitoring algorithm based on the temperature compensation frequency bias combination model. By analyzing the characteristics of time difference measurements, constructing the temperature compensation frequency bias combination model, and extracting and monitoring noise and frequency bias features from the time difference measurements, the algorithm achieves comprehensive time–frequency signal integrity monitoring. Experimental results demonstrate that the algorithm can effectively detect, identify, and alert users to time–frequency signal faults. Additionally, the model and the integrity monitoring parameters developed in this paper exhibit high adaptability, making them directly applicable to the integrity monitoring of time–frequency signals across various links. Compared with traditional monitoring algorithms, the algorithm proposed in this paper greatly improves the effectiveness, adaptability, and real-time performance of time–frequency signal integrity monitoring. [ABSTRACT FROM AUTHOR]

In the quality inspection process of high-voltage cables, several commonly used indicators include cable length, insulation thickness, and the number of conductors within the core. Among these factors, the count of conductors holds particular significance as a key determinant of cable quality. Machine vision technology has found extensive application in automatically detecting the number of conductors in cross-sectional images of high-voltage cables. However, the presence of scratch-type defects in cut high-voltage cable cross-sections can significantly compromise the precision of conductor count detection. To address this problem, this paper introduces a novel improved total variation (TV) algorithm, marking the first-ever application of the TV algorithm in this domain. Considering the staircase effect, the direct use of the TV algorithm is prone to cause serious loss of image edge information. The proposed algorithm firstly introduces multimodal features to effectively mitigate the staircase effect. While eliminating scratch-type defects, the algorithm endeavors to preserve the original image's edge information, consequently yielding a noteworthy enhancement in detection accuracy. Furthermore, a dataset was curated, comprising images of cross-sections of high-voltage cables of varying sizes, each displaying an assortment of scratch-type defects. Experimental findings conclusively demonstrate the algorithm's exceptional efficiency in eradicating diverse scratch-type defects within high-voltage cable cross-sections. The average scratch elimination rate surpasses 90%, with an impressive 96.15% achieved on cable sample 4. A series of conducted ablation experiments in this paper substantiate a significant enhancement in cable image quality. Notably, the Edge Preservation Index (EPI) exhibits an improvement of approximately 20%, resulting in a substantial boost to conductor count detection accuracy, thus effectively enhancing the quality of high-voltage cable production. [ABSTRACT FROM AUTHOR]

Cryo-electron micrograph images have various characteristics such as varying sizes, shapes, and distribution densities of individual particles, severe background noise, high levels of impurities, irregular shapes, blurred edges, and similar color to the background. How to demonstrate good adaptability in the field of image vision by picking up single particles from multiple types of cryo-electron micrographs is currently a challenge in the field of cryo-electron micrographs. This paper combines the characteristics of the MixUp hybrid enhancement algorithm, enhances the image feature information in the pre-processing stage, builds a feature perception network based on the channel self-attention mechanism in the forward network of the Swin Transformer model network, achieving adaptive adjustment of self-attention mechanism between different single particles, increasing the network's tolerance to noise, Incorporating PReLU activation function to enhance information exchange between pixel blocks of different single particles, and combining the Cross-Entropy function with the softmax function to construct a classification network based on Swin Transformer suitable for cryo-electron micrograph single particle detection model (Swin-cryoEM), achieving mixed detection of multiple types of single particles. Swin-cryoEM algorithm can better solve the problem of good adaptability in picking single particles of many types of cryo-electron micrographs, improve the accuracy and generalization ability of the single particle picking method, and provide high-quality data support for the three-dimensional reconstruction of a single particle. In this paper, ablation experiments and comparison experiments were designed to evaluate and compare Swin-cryoEM algorithms in detail and comprehensively on multiple datasets. The Average Precision is an important evaluation index of the evaluation model, and the optimal Average Precision reached 95.5% in the training stage Swin-cryoEM, and the single particle picking performance was also superior in the prediction stage. This model inherits the advantages of the Swin Transformer detection model and is superior to mainstream models such as Faster R-CNN and YOLOv5 in terms of the single particle detection capability of cryo-electron micrographs. [ABSTRACT FROM AUTHOR]

Recent research has focused on applying blockchain technology to solve security-related problems in Internet of Things (IoT) networks. However, the inherent scalability issues of blockchain technology become apparent in the presence of a vast number of IoT devices and the substantial data generated by these networks. Therefore, in this paper, we use a lightweight consensus algorithm to cater to these problems. We propose a scalable blockchain-based framework for managing IoT data, catering to a large number of devices. This framework utilizes the Delegated Proof of Stake (DPoS) consensus algorithm to ensure enhanced performance and efficiency in resource-constrained IoT networks. DPoS being a lightweight consensus algorithm leverages a selected number of elected delegates to validate and confirm transactions, thus mitigating the performance and efficiency degradation in the blockchain-based IoT networks. In this paper, we implemented an Interplanetary File System (IPFS) for distributed storage, and Docker to evaluate the network performance in terms of throughput, latency, and resource utilization. We divided our analysis into four parts: Latency, throughput, resource utilization, and file upload time and speed in distributed storage evaluation. Our empirical findings demonstrate that our framework exhibits low latency, measuring less than 0.976 ms. The proposed technique outperforms Proof of Stake (PoS), representing a state-of-the-art consensus technique. We also demonstrate that the proposed approach is useful in IoT applications where low latency or resource efficiency is required. [ABSTRACT FROM AUTHOR]

This paper explores the concept of proportional lumpability as an extension of the original definition of lumpability, addressing the challenges posed by the state space explosion problem in computing performance indices for large stochastic models. Lumpability traditionally relies on state aggregation techniques and is applicable to Markov chains demonstrating structural regularity. Proportional lumpability extends this idea, proposing that the transition rates of a Markov chain can be modified by certain factors, resulting in a lumpable new Markov chain. This concept facilitates the derivation of precise performance indices for the original process. This paper establishes the well-defined nature of the problem of computing the coarsest proportional lumpability that refines a given initial partition, ensuring a unique solution exists. Additionally, a polynomial time algorithm is introduced to solve this problem, offering valuable insights into both the concept of proportional lumpability and the broader realm of partition refinement techniques. The effectiveness of proportional lumpability is demonstrated through a case study that consists of designing a model to investigate selfish mining behaviors on public blockchains. This research contributes to a better understanding of efficient approaches for handling large stochastic models and highlights the practical applicability of proportional lumpability in deriving exact performance indices. [ABSTRACT FROM AUTHOR]

Positioning technology is one of the key steps of automatic docking. At present, vehicle docking technology is widely used in airport baggage cars, towing trailers and other fields, and the docking process is mostly done manually. In order to realize the automatic docking of vehicles in mixed scenes, this paper proposes a fast positioning method for docking vehicles in mixed traffic scenes. First, using the regression relationship between the template size in the camera's field of view and the actual distance, FFT template matching and threshold judgment methods are employed to locate, track, and match the template, as well as verify the threshold results, in order to achieve template long-distance positioning and ROI extraction. Then, based on the regression relationship between AprilTag pixels in the camera's field of view and actual distance, the experiment of AprilTag minimum recognition pixel is designed. Finally, the real-time pixels of AprilTag are calculated from the real-time ranging results, and compared with the minimum recognition pixel of AprilTag, it is judged whether the recognition conditions are met, so as to carry out the subsequent AprilTag positioning. The experimental results demonstrate that the method proposed in this paper can achieve rapid and accurate positioning of a target docking vehicle at a long distance, while reducing the mismatch rate. On this basis, by designing the identification conditions of AprilTag, the rapid identification and positioning of AprilTag is realized, which reduces the traversal time of the algorithm. The feasibility of this positioning method is verified by the attitude angle error experiment, which provides supporting conditions for the subsequent docking path planning and vehicle control. [ABSTRACT FROM AUTHOR]

As the second most predominant greenhouse gas, methane-targeted emission mitigation holds the potential to decelerate the pace of global warming. Satellite remote sensing is an important monitoring tool, and we review developments in the satellite detection of methane. This paper provides an overview of the various types of satellites, including the various instrument parameters, and describes the different types of satellite retrieval algorithms. In addition, the currently popular methane point source quantification method is presented. Based on existing research, we delineate the classification of methane remote sensing satellites into two overarching categories: area flux mappers and point source imagers. Area flux mappers primarily concentrate on the assessment of global or large-scale methane concentrations, with a further subclassification into active remote sensing satellites (e.g., MERLIN) and passive remote sensing satellites (e.g., TROPOMI, GOSAT), contingent upon the remote sensing methodology employed. Such satellites are mainly based on physical models and the carbon dioxide proxy method for the retrieval of methane. Point source imagers, in contrast, can detect methane point source plumes using their ultra-high spatial resolution. Subcategories within this classification include multispectral imagers (e.g., Sentinel-2, Landsat-8) and hyperspectral imagers (e.g., PRISMA, GF-5), contingent upon their spectral resolution disparities. Area flux mappers are mostly distinguished by their use of physical algorithms, while point source imagers are dominated by data-driven methods. Furthermore, methane plume emissions can be accurately quantified through the utilization of an integrated mass enhancement model. Finally, a prediction of the future trajectory of methane remote sensing satellites is presented, in consideration of the current landscape. This paper aims to provide basic theoretical support for subsequent scientific research. [ABSTRACT FROM AUTHOR]

The rapid growth of contents on the Web in different languages increases the demand of Cross-Lingual Information Retrieval (CLIR). The accuracy of result suffers due to many problems such as ambiguity and drift issue in query. Query Expansion (QE) offers reliable solution for obtaining suitable documents for user queries. In this paper, we proposed an architecture for Hindi–English CLIR system using QE for improving the relevancy of retrieved results. In this architecture, for the addition of term(s) at appropriate position(s), we proposed a location-based algorithm to resolve the drift query issue in QE. User queries in Hindi language have been translated into document language (i.e. English) and the accuracy of translation is improved using Back-Translation. Google search has been performed and the retrieved documents are ranked using Okapi BM25 to arrange the documents in the order of decreasing relevancy to select the most suitable terms for QE. We used term selection value (TSV) for QE and for retrieving the terms, we created three test collections namely the (i) description and narration of the Forum for Information Retrieval Evaluation (FIRE) dataset, (ii) Snippets of retrieved documents against each query and (iii) Nearest-Neighborhood (NN) words against each query word among the ranked documents. To evaluate the system, 50 queries of Hindi language are selected from the FIRE-2012 dataset. In this paper, we performed two experiments: (i) impact of the proposed location-based algorithm on the proposed architecture of CLIR; and (ii) analysis of QE using three datasets, i.e. FIRE, NN and Snippets. In the first case, result shows that the relevancy of Hindi–English CLIR is improved by performing QE using the location-based algorithm and a 12% of improvement is achieved as compared to the results of QE obtained without applying the location-based algorithm. In the second case, the location-based algorithm is applied on three datasets. The Mean Average Precision (MAP) values of retrieved documents after QE are 0.5379 (NN), 0.6018 (FIRE) and 0.6406 (Snippets) for the three test collections, whereas the MAP before QE is 0.37102. This clearly shows the significant improvement of retrieved results for all three test collections. Among the three test collections, QE has been found most effective along with Snippets as indicated by the results with the improvements of 6.48% and 19.12% over FIRE and NN test collections, respectively. [ABSTRACT FROM AUTHOR]

In order to address the challenges of identifying, detecting, and tracking moving objects in video surveillance, this paper emphasizes image-based dynamic entity detection. It delves into the complexities of numerous moving objects, dense targets, and intricate backgrounds. Leveraging the You Only Look Once (YOLOv3) algorithm framework, this paper proposes improvements in image segmentation and data filtering to address these challenges. These enhancements form a novel multi-object detection algorithm based on an improved YOLOv3 framework, specifically designed for video applications. Experimental validation demonstrates the feasibility of this algorithm, with success rates exceeding 60% for videos such as "jogging", "subway", "video 1", and "video 2". Notably, the detection success rates for "jogging" and "video 1" consistently surpass 80%, indicating outstanding detection performance. Although the accuracy slightly decreases for "Bolt" and "Walking2", success rates still hover around 70%. Comparative analysis with other algorithms reveals that this method's tracking accuracy surpasses that of particle filters, Discriminative Scale Space Tracker (DSST), and Scale Adaptive Multiple Features (SAMF) algorithms, with an accuracy of 0.822. This indicates superior overall performance in target tracking. Therefore, the improved YOLOv3-based multi-object detection and tracking algorithm demonstrates robust filtering and detection capabilities in noise-resistant experiments, making it highly suitable for various detection tasks in practical applications. It can address inherent limitations such as missed detections, false positives, and imprecise localization. These improvements significantly enhance the efficiency and accuracy of target detection, providing valuable insights for researchers in the field of object detection, tracking, and recognition in video surveillance. [ABSTRACT FROM AUTHOR]

This paper introduces a straightforward control strategy aimed at the reduction of current fluctuations within the low-frequency domain of open-loop V/f control in induction motor drives. Traditional control techniques necessitate the addition of a current compensator based on motor parameters and the use of digital filters such as band-pass or high-pass filters. These methods, however, rely on precise motor parameters and involve complex filter design and implementation. The proposed control is capable of suppressing current fluctuations without controlling the slip of the induction motor. The proposed control strategy generates the forced rotation angle and command input voltage using the V/f block and outputs the d-axis voltage using a proportional integral controller to keep the d-axis current constant at zero. The difference between the command input voltage and the d-axis voltage is applied as the q-axis voltage and then applied through SVPWM. In order to verify the effectiveness of the proposed control, the proposed control is implemented and analyzed using power simulation based on the results of the analysis of the causes of current fluctuations in the induction motor. Finally, the effect of suppressing current fluctuations of the induction motor is verified through experimental results. In the 10~19 Hz range, where the conventional V/f control method resulted in current fluctuation rates exceeding 10% and peaking at 113.3% at 13 Hz, the proposed method suppressed the fluctuation rate to below 8.6% across all frequencies. This paper validates the effectiveness of the proposed control strategy through these results. [ABSTRACT FROM AUTHOR]

Roller bearings are critical components in various mechanical systems, and the timely detection of potential failures is essential for preventing costly downtimes and avoiding substantial machinery breakdown. This research focuses on finding and verifying a robust method that can detect failures early, without creating false positive failure states. Therefore, this paper introduces a novel algorithm for the early detection of roller bearing failures, particularly tailored to high-precision bearings and automotive test bed systems. The featured method (AFI—Advanced Failure Indicator) utilizes the Fast Fourier Transform (FFT) of wideband accelerometers to calculate the spectral content of vibration signals emitted by roller bearings. By calculating the frequency bands and tracking the movement of these bands within the spectra, the method provides an indicator of the machinery's health, mainly focusing on the early stages of bearing failure. The calculated channel can be used as a trend indicator, enabling the method to identify subtle deviations associated with impending failures. The AFI algorithm incorporates a non-static limit through moving average calculations and volatility analysis methods to determine critical changes in the signal. This thresholding mechanism ensures the algorithm's responsiveness to variations in operating conditions and environmental factors, contributing to its robustness in diverse industrial settings. Further refinement was achieved through an outlier detection filter, which reduces false positives and enhances the algorithm's accuracy in identifying genuine deviations from the normal operational state. To benchmark the developed algorithm, it was compared with three industry-standard algorithms: VRMS calculations per ISO 10813-3, Mean Absolute Value of Extremums (MAVE), and Envelope Frequency Band (EFB). This comparative analysis aimed to evaluate the efficacy of the novel algorithm against the established methods in the field, providing valuable insights into its potential advantages and limitations. In summary, this paper presents an innovative algorithm for the early detection of roller bearing failures, leveraging FFT-based spectral analysis, trend monitoring, adaptive thresholding, and outlier detection. Its ability to confirm the first failure state underscores the algorithm's effectiveness. [ABSTRACT FROM AUTHOR]

With the surge in astronomical data volume, modern astronomical research faces significant challenges in data storage, processing, and access. The I/O bottleneck issue in astronomical data processing is particularly prominent, limiting the efficiency of data processing. To address this issue, this paper proposes a tiered storage algorithm based on the access characteristics of astronomical data. The C4.5 decision tree algorithm is employed as the foundation to implement an astronomical data access correlation algorithm. Additionally, a data copy migration strategy is designed based on tiered storage technology to achieve efficient data access. Preprocessing tests were conducted on 418GB NSRT (Nanshan Radio Telescope) formaldehyde spectral line data, showcasing that tiered storage can potentially reduce data processing time by up to 38.15%. Similarly, utilizing 802.2 GB data from FAST (Five- hundred-meter Aperture Spherical radio Telescope) observations for pulsar search data processing tests, the tiered storage approach demonstrated a maximum reduction of 29.00% in data processing time. In concurrent testing of data processing workflows, the proposed astronomical data heat correlation algorithm in this paper achieved an average reduction of 17.78% in data processing time compared to centralized storage. Furthermore, in comparison to traditional heat algorithms, it reduced data processing time by 5.15%. The effectiveness of the proposed algorithm is positively correlated with the associativity between the algorithm and the processed data. The tiered storage algorithm based on the characteristics of astronomical data proposed in this paper is poised to provide algorithmic references for large-scale data processing in the field of astronomy in the future. [ABSTRACT FROM AUTHOR]

In this paper, the reentry phase of the Aerospaceplane is taken as the research object, and the performance parameters of the reusable rocket of a private company are analyzed. Aiming at the guidance and control scheme of the spacecraft returning to the reentry trajectory in the real environment, the original natural algorithm is optimized by considering various reentry flight constraints, and the improved original natural algorithm is used to optimize the reentry trajectory of the Aerospaceplane. We obtained two types of reentry trajectories in the presence of large flight-restricted areas, the "S-type" trajectory and the "spiral-type" trajectory, and obtained data on various influencing factors. The results showed that the basic state parameters of the spiral trajectory optimized using the improved original natural algorithm after adding constraints met the constraint conditions. The aerodynamic heating rate and overload of the spiral reentry trajectory were to some extent greater than those of the S-type trajectory. Under the increasingly stringent requirements of the aerospace environment, new requirements were put forward for the thermal protection system to meet the wider environmental situation. This paper uses the improved original natural algorithm for the first time and applies it to the field of aerospace reentry and entry and adds more constraints to this algorithm for computation. Besides, for the first time, the macroscopic nature of trajectory types is used as a comparative element for parameter comparison, providing a reference basis for selecting trajectory optimization directions from the macroscopic perspective of trajectory types. [ABSTRACT FROM AUTHOR]

In industry, the task of defect classification and defect localization is an important part of defect detection system. However, existing studies only focus on one task and it is difficult to ensure the accuracy of both tasks. This paper proposes a defect detection system based on improved Yolo_v4, which greatly improves the detection ability of minor defects. For K_Means algorithm clustering prianchors question with strong subjectivity, the paper proposes the Density Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm to determine the number of Anchors. To solve the problem of low detection rate of small targets caused by insufficient reuse rate of low-level features in CSPDarknet53 feature extraction network, this paper proposes an ECA-DenseNet-BC-121 feature extraction network to improve it. And the Dual Channel Feature Enhancement (DCFE) module is proposed to improve the local information loss and gradient propagation obstruction caused by quad chain convolution in PANet networks to improve the robustness of the model. The experimental results on the fabric surface defect detection datasets show that the mAP of the improved Yolo_v4 is 98.97%, which is 7.67% higher than SSD, 3.75% higher than Faster_RCNN, 10.82% higher than Yolo_v4 tiny, and 5.35% higher than Yolo_v4, and the detection speed reaches 39.4 fps. It can meet the real-time monitoring needs of industrial sites. [ABSTRACT FROM AUTHOR]

An important issue in interconnected microgrids (MGs) is the realization of balance between the generation side and the demand side. Imbalanced generation and load demands lead to security, power quality, and reliability issues. The load frequency control (LFC) is accountable for regulating MG frequency against generation/load disturbances. This paper proposed an optimized fractional order (FO) LFC scheme with cascaded outer and inner control loops. The proposed controller is based on a cascaded one plus tilt derivative (1+TD) in the outer loop and an FO tilt integrator-derivative with a filter (FOTIDF) in the inner loop, forming the cascaded (1+TD/FOTIDF) controller. The proposed 1+TD/FOTIDF achieves better disturbance rejection compared with traditional LFC methods. The proposed 1+TD/FOTIDF scheme is optimally designed using a modified version of the liver cancer optimization algorithm (MLCA). In this paper, a new modified liver cancer optimization algorithm (MLCA) is proposed to overcome the shortcomings of the standard Liver cancer optimization algorithm (LCA), which contains the early convergence to local optima and the debility of its exploration process. The proposed MLCA is based on three improvement mechanisms, including chaotic mutation (CM), quasi-oppositional based learning (QOBL), and the fitness distance balance (FDB). The proposed MLCA method simultaneously adjusts and selects the best 1+TD/FOTIDF parameters to achieve the best control performance of MGs. Obtained results are compared to other designed FOTID, TI/FOTID, and TD/FOTID controllers. Moreover, the contribution of electric vehicles and the high penetration of renewables are considered with power system parameter uncertainty to test the stability of the proposed 1+TD/FOTIDF LFC technique. The obtained results under different possible load/generation disturbance scenarios confirm a superior response and improved performance of the proposed 1+TD/FOTIDF and the proposed MLCA-based optimized LFC controller. [ABSTRACT FROM AUTHOR]

Polar format algorithm (PFA) is a widely used high-resolution SAR imaging algorithm that can be implemented in advanced widefield staring synthetic aperture radar (WFS-SAR). However, existing algorithms have limited analysis in wavefront curvature error (WCE) and are challenging to apply to WFS-SAR with high-resolution and large-swath scenes. This paper proposes an extended polar format algorithm for joint envelope and phase error correction in WFS-SAR imaging with maneuvering trajectory. The impact of the WCE and residual acceleration error (RAE) are analyzed in detail by deriving the specific wavenumber domain signal based on the mapping relationship between the geometry space and wavenumber space. Subsequently, this paper improves the traditional WCE compensation function and introduces a new range cell migration (RCM) recalibration function for joint envelope and phase error correction. The 2D precisely focused SAR image is acquired based on the spatially variant inverse filtering in the final. Simulation experiments validate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Multi-Objective Travelling Salesman Problem (MOTSP) is one of the most crucial problems in realistic scenarios, and it is difficult to solve by classical methods. However, it can be solved by evolutionary methods. This paper investigates the Constrained Multi-Objective Travelling Salesman Problem (CMOTSP) and the Constrained Multi-Objective Solid Travelling Salesman Problem (CMOSTSP) under an uncertain environment with zigzag uncertain variables. To solve CMOTSP and CMOSTSP models under uncertain environment, the expected value and optimistic value models are developed using two different ranking criteria of uncertainty theory. The models are transformed to their deterministic forms using the fundamentals of uncertainty. The Models are solved using two solution methodologies Aspiration level-based Multi-Objective Quasi Oppositional Jaya Algorithm (AL-based MOQO Jaya) and Fuzzy Programming Technique (FPT) with linear membership function. Further, the numerical illustration is solved using both methodologies to demonstrate its application. The sensitivity of the OVM model's objective functions regarding confidence levels is also investigated to look at the variation in the objective function. The paper concludes that the developed approach has solved CMOTSP and CMOSTSP efficiently with an effective output and provides alternative solutions for decision-making to DM. [ABSTRACT FROM AUTHOR]

This paper is about the opposite of judgement and calculation. This opposition has been a traditional anchor of critiques concerned with the rise of AI decision making over human judgement. Contrary to these approaches, it is argued that human judgement is not and cannot be replaced by calculation, but that it is human judgement that contextualises computational structures and gives them meaning and purpose. The article focuses on the epistemic structure of algorithms and artificial neural networks to find that they always depend on human judgement to be related to real life objects or purposes. By introducing the philosophical concept of judgement, it becomes clear that the property of judgement to provide meaning and purposiveness is based on the temporality of human life and the ambiguity of language, which quantitative processes lack. A juxtaposition shows that calculations and clustering can be used and referred to in more or less prejudiced and reflecting as well as opaque and transparent ways, but thereby always depend on human judgement. The paper clearly asserts that the transparency of AI is necessary for their autonomous use. This transparency requires the explicitness of the judgements that constitute these computational structures, thereby creating an awareness of the conditionality of such epistemic entities. [ABSTRACT FROM AUTHOR]