Search

Millimeter-wave radar-based identification technology has a wide range of applications in persistent identity verification, covering areas such as security production, healthcare, and personalized smart consumption systems. It has received extensive attention from the academic community due to its advantages of being non-invasive, environmentally insensitive and privacy-preserving. Existing identification algorithms mainly rely on a single signal, such as breathing or heartbeat. The reliability and accuracy of these algorithms are limited due to the high similarity of breathing patterns and the low signal-to-noise ratio of heartbeat signals. To address the above issues, this paper proposes an algorithm for multimodal fusion for identity recognition. This algorithm extracts and fuses features derived from phase signals, respiratory signals, and heartbeat signals for identity recognition purposes. The spatial features of signals with different modes are first extracted by the residual network (ResNet), after which these features are fused with a spatial-channel attention fusion module. On this basis, the temporal features are further extracted with a time series-based self-attention mechanism. Finally, the feature vectors of the user's vital sign modality are obtained to perform identity recognition. This method makes full use of the correlation and complementarity between different modal signals to improve the accuracy and reliability of identification. Simulation experiments show that the algorithm identity recognition proposed in this paper achieves an accuracy of 94.26% on a 20-subject self-test dataset, which is much higher than that of the traditional algorithm, which is about 85%. [ABSTRACT FROM AUTHOR]

To overcome the problem of the high initial position of the point cloud required by the traditional Iterative Closest Point (ICP) algorithm, in this paper, we propose a point cloud registration method based on normal vector and directional histogram features (SHOT). Firstly, a hybrid filtering method based on the voxel idea is proposed and verified using the measured point cloud data, and the noise removal rates of 97.5%, 97.8%, and 93.8% are obtained. Secondly, in terms of feature point extraction, the original algorithm is optimized, and the optimized algorithm can better extract the missing part of the point cloud. Finally, a fine alignment method based on normal vector and directional histogram features (SHOT) is proposed, and the improved algorithm is compared with the existing algorithm. Taking the Stanford University point cloud data and the self-measured point cloud data as examples, the plotted iteration-error plots can be concluded that the improved method can reduce the number of iterations by 40.23% and 37.62%, respectively. [ABSTRACT FROM AUTHOR]

In industry, the task of defect classification and defect localization is an important part of defect detection system. However, existing studies only focus on one task and it is difficult to ensure the accuracy of both tasks. This paper proposes a defect detection system based on improved Yolo_v4, which greatly improves the detection ability of minor defects. For K_Means algorithm clustering prianchors question with strong subjectivity, the paper proposes the Density Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm to determine the number of Anchors. To solve the problem of low detection rate of small targets caused by insufficient reuse rate of low-level features in CSPDarknet53 feature extraction network, this paper proposes an ECA-DenseNet-BC-121 feature extraction network to improve it. And the Dual Channel Feature Enhancement (DCFE) module is proposed to improve the local information loss and gradient propagation obstruction caused by quad chain convolution in PANet networks to improve the robustness of the model. The experimental results on the fabric surface defect detection datasets show that the mAP of the improved Yolo_v4 is 98.97%, which is 7.67% higher than SSD, 3.75% higher than Faster_RCNN, 10.82% higher than Yolo_v4 tiny, and 5.35% higher than Yolo_v4, and the detection speed reaches 39.4 fps. It can meet the real-time monitoring needs of industrial sites. [ABSTRACT FROM AUTHOR]

To address the current steel surface defect detection algorithms in practical applications involving low detection accuracy, an efficient and highly accurate strip steel surface defect detection algorithm, DEW-YOLO, is proposed in this paper. Firstly, by combining the advantages of deformable convolutional networks (DCNs), this paper innovates the C2F module in YOLOv8 and proposes a C2f_DCN module that can flexibly sample features to enhance the abilities of learning and expressing defect features of different sizes and shapes. Secondly, the explicit visual center (EVC) is introduced into the backbone network, which enhances feature extraction capabilities and adaptability and enables the model to better adjust features at different levels and scales. Finally, the original loss function is replaced with the Wise-IoU (WIoU) loss function to accurately measure the similarity between the target frames and improve the defect detection performance of the model. The experimental results on the NEU-DET dataset demonstrate that the algorithms proposed in this paper achieved a mean average precision (mAP) of 80.3% in steel surface defect detection tasks, which was a 3.9% improvement over the original YOLOv8 model. The model's inference speed reached 91 frames per second (FPS). DEW-YOLO effectively enhances the accuracy of steel defect detection and better satisfies industrial inspection requirements. [ABSTRACT FROM AUTHOR]

For visible and Synthetic Aperture Radar (SAR) image fusion, this paper proposes a visible and SAR image fusion algorithm based on a Transformer and a Convolutional Neural Network (CNN). Firstly, in this paper, the Restormer Block is used to extract cross-modal shallow features. Then, we introduce an improved Transformer–CNN Feature Extractor (TCFE) with a two-branch residual structure. This includes a Transformer branch that introduces the Lite Transformer (LT) and DropKey for extracting global features and a CNN branch that introduces the Convolutional Block Attention Module (CBAM) for extracting local features. Finally, the fused image is output based on global features extracted by the Transformer branch and local features extracted by the CNN branch. The experiments show that the algorithm proposed in this paper can effectively achieve the extraction and fusion of global and local features of visible and SAR images, so that high-quality visible and SAR fusion images can be obtained. [ABSTRACT FROM AUTHOR]

In the process of fabric production, various types of defects affect the quality of a fabric. However, due to the wide variety of fabric defects, the complexity of fabric textures, and the concealment of small target defects, current fabric defect detection algorithms suffer from issues such as having a slow detection speed, low detection accuracy, and a low recognition rate of small target defects. Therefore, developing an efficient and accurate fabric defect detection system has become an urgent problem that needs to be addressed in the textile industry. Addressing the aforementioned issues, this paper proposes an improved YOLOv8n-LAW algorithm based on the YOLOv8n algorithm. First, LSKNet attention mechanisms are added to both ends of the C2f module in the backbone network to provide a broader context area, enhancing the algorithm's feature extraction capability. Next, the PAN-FPN structure of the backbone network is replaced by the AFPN structure, so that the different levels of features of the defects are closer to the semantic information in the progressive fusion. Finally, the CIoU loss is replaced with the WIoU v3 loss, allowing the model to dynamically adjust gradient gains based on the features of fabric defects, effectively focusing on distinguishing between defective and non-defective regions. The experimental results show that the improved YOLOv8n-LAW algorithm achieved an accuracy of 97.4% and a detection speed of 46 frames per second, while effectively increasing the recognition rate of small target defects. [ABSTRACT FROM AUTHOR]

Pixel‐level labeling of regions of interest in an image is a key step in building a labeled training dataset for supervised deep learning networks of images. However, traditional manual labeling of cancerous regions in digital pathological images by doctors is time‐consuming and inefficient. To address this issue, this paper proposes an automatic labeling method for whole slide images, which combines clustering and edge detection techniques. The proposed method utilizes the multi‐level feature fusion model and the Long‐Short Term Memory network to discriminate the cancerous nature of the whole slide images, thereby improving the classification accuracy of the whole slide images. Subsequently, the automatic labeling of cancerous regions is achieved by integrating a density‐based clustering algorithm and an edge point extraction algorithm, both based on the discriminated results of the cancerous properties of whole slide images. The experimental results demonstrate the effectiveness of the proposed method, which offers an efficient and accurate solution to the challenging task of cancerous region labeling in digital pathological images. [ABSTRACT FROM AUTHOR]

Generalized target detection algorithms perform well for large- and medium-sized targets but struggle with small ones. However, with the growing importance of aerial images in urban transportation and environmental monitoring, detecting small targets in such imagery has been a promising research hotspot. The challenge in small object detection lies in the limited pixel proportion and the complexity of feature extraction. Moreover, current mainstream detection algorithms tend to be overly complex, leading to structural redundancy for small objects. To cope with these challenges, this paper recommends the PCSG model based on yolov5, which optimizes both the detection head and backbone networks. (1) An enhanced detection header is introduced, featuring a new structure that enhances the feature pyramid network and the path aggregation network. This enhancement bolsters the model's shallow feature reuse capability and introduces a dedicated detection layer for smaller objects. Additionally, redundant structures in the network are pruned, and the lightweight and versatile upsampling operator CARAFE is used to optimize the upsampling algorithm. (2) The paper proposes the module named SPD-Conv to replace the strided convolution operation and pooling structures in yolov5, thereby enhancing the backbone's feature extraction capability. Furthermore, Ghost convolution is utilized to optimize the parameter count, ensuring that the backbone meets the real-time needs of aerial image detection. The experimental results from the RSOD dataset show that the PCSG model exhibits superior detection performance. The value of mAP increases from 97.1% to 97.8%, while the number of model parameters decreases by 22.3%, from 1,761,871 to 1,368,823. These findings unequivocally highlight the effectiveness of this approach. [ABSTRACT FROM AUTHOR]

To overcome the deficiencies in segmenting hot spots from thermal infrared images, such as difficulty extracting the edge features, low accuracy, and a high missed detection rate, an improved Mask R-CNN photovoltaic hot spot thermal image segmentation algorithm has been proposed in this paper. Firstly, the edge image features of hot spots were extracted based on residual neural networks. Secondly, by combining the feature pyramid structure, an edge-guided feature pyramid structure was designed, and the hot spot edge features were injected into a Mask R-CNN network. Thirdly, an infrared spatial attention module was introduced into the Mask R-CNN network when feature extraction and the infrared features of the detected hot spots were enhanced. Fourthly, the size ratio of the candidate frames was adjusted self-adaptively according to the structural characteristics of the aspect ratio of the hot spots. Finally, the validation experiments were conducted, and the results demonstrated that the hot spot contours of thermal infrared images were enhanced through the algorithm proposed in this paper, and the segmentation accuracy was significantly improved. [ABSTRACT FROM AUTHOR]

The utilization of ultraviolet (UV) absorption spectroscopy for monitoring the concentration of specific decomposition gas components in gas-insulated switchgear (GIS) can provide a means to assess its insulation status. Nevertheless, UV optical modules currently deployed in the field are susceptible to external interferences like ambient noise and equipment vibrations. Real-time spectral data acquisition often suffers from significant noise contamination, directly impinging on subsequent feature extraction and detection accuracy. This paper presents an optimized singular value decomposition (SVD) noise reduction method for mitigating noisy spectral signals. First, each singular value within the noisy signal is transformed into a component signal. Next, the highest frequency value in the signal serves as an indicator to characterize the signal. Finally, the primary frequency values are arranged based on the decreasing singular values of the original noisy signal. The singular value corresponding to the first primary frequency value surpassing a preset threshold is selected as the effective order for denoising. Random noise with varying intensities was intentionally introduced to the UV spectral signal of sulfur dioxide (SO2), followed by noise reduction procedures. It is shown that the improved SVD noise reduction algorithm proposed in this paper enhances the signal-to-noise ratio (SNR) by 18.02% and 16.86%, and reduces the root-mean-square error (RMSE) by 15.13% and 14.92%, respectively, compared with the singular value difference spectrum (SVDS) denoising method and wavelet transform denoising method under the condition of low SNR. Furthermore, there exists a linear relationship between the concentration of SO2 samples and the eigenvalues of the UV spectra, demonstrating a higher linear goodness with a coefficient of 0.99735. The denoising method proposed in this paper does not require the manual setting of various types of parameters, and has a better ability to deal with the noise of UV spectral signals in engineering sites with complex environments. [ABSTRACT FROM AUTHOR]

In recent years, highway accidents occur frequently, the main reason is that there is always foreign body invasion on the highway, which makes people unable to respond to emergencies in time. In order to reduce the occurrence of highway incidents, an object detection algorithm for highway intrusion was proposed in this paper. Firstly, a new feature extraction module was proposed to better preserve the main information. Secondly, a new feature fusion method was proposed to improve the accuracy of object detection. Finally, a lightweight method was proposed to reduce the computational complexity. We compare the algorithm in this paper with existing algorithms, the experimental results showed that: On the Visdrone dataset (small size targets), (a) the CS-YOLO was 3.6% more accurate than the YOLO v8. (b) The CS-YOLO was 1.2% more accurate than the YOLO v8 on the Tinypersons dataset (minimal size targets). (c) CS-YOLO was 1.4% more accurate than YOLO v8 on VOC2007 data set (normal size). [ABSTRACT FROM AUTHOR]

YOLOv5 is one of the most popular object detection algorithms, which is divided into multiple series according to the control of network depth and width. To realize the deployment of mobile devices or embedded devices, the paper proposes a lightweight aerial image object detection algorithm (LAI-YOLOv5s) based on the improvement of YOLOv5s with a relatively small amount of calculation and parameter and relatively fast reasoning speed. Firstly, to better detect small objects, the paper replaces the minimum detection head with the maximum detection head and proposes a new feature fusion method, DFM-CPFN(Deep Feature Map Cross Path Fusion Network), to enrich the semantic information of deep features. Secondly, the paper designs a new module based on VoVNet to improve the feature extraction ability of the backbone network. Finally, based on the idea of ShuffleNetV2, the paper makes the network more lightweight without affecting detection accuracy. Based on the VisDrone2019 dataset, the detection accuracy of LAI-YOLOv5s on the mAP@0.5 index is 8.3% higher than that of the original algorithm. Compared with other series of YOLOv5 and YOLOv3 algorithms, LAI-YOLOv5s has the advantages of low computational cost and high detection accuracy. [ABSTRACT FROM AUTHOR]

To ensure the long-term stable and uninterrupted service of satellite navigation systems, the robustness and reliability of time–frequency systems are crucial. Integrity monitoring is an effective method to enhance the robustness and reliability of time–frequency systems. Time–frequency signals are fundamental for integrity monitoring, with their time differences and frequency biases serving as essential indicators. These indicators are influenced by the inherent characteristics of the time–frequency signals, as well as the links and equipment they traverse. Meanwhile, existing research primarily focuses on only monitoring the integrity of the time–frequency signals' output by the atomic clock group, neglecting the integrity monitoring of the time–frequency signals generated and distributed by the time–frequency signal generation and distribution subsystem. This paper introduces a time–frequency signal integrity monitoring algorithm based on the temperature compensation frequency bias combination model. By analyzing the characteristics of time difference measurements, constructing the temperature compensation frequency bias combination model, and extracting and monitoring noise and frequency bias features from the time difference measurements, the algorithm achieves comprehensive time–frequency signal integrity monitoring. Experimental results demonstrate that the algorithm can effectively detect, identify, and alert users to time–frequency signal faults. Additionally, the model and the integrity monitoring parameters developed in this paper exhibit high adaptability, making them directly applicable to the integrity monitoring of time–frequency signals across various links. Compared with traditional monitoring algorithms, the algorithm proposed in this paper greatly improves the effectiveness, adaptability, and real-time performance of time–frequency signal integrity monitoring. [ABSTRACT FROM AUTHOR]

As urbanization accelerates, traffic congestion and frequent accidents have become prominent issues, prompting the development of intelligent transportation systems. This paper focuses on the research of vehicle and pedestrian detection algorithms to improve detection accuracy in complex traffic environments. Considering the limitations of traditional object detection algorithms in complex situations, this study adopts the deep learning-based YOLOv8 algorithm and introduces the Coordinate Attention (CA) module to enhance the model's feature extraction and localization capabilities. Experimental results show that the improved YOLOv8 network achieves a 1.1% increase in detection accuracy while maintaining its original speed. Furthermore, this paper constructs a vehicle and pedestrian dataset suitable for Chinese traffic scenes, providing an effective solution for autonomous driving assistance systems. Overall, this study holds significant reference value for vehicle and pedestrian detection in the field of intelligent transportation. [ABSTRACT FROM AUTHOR]

In view of the problems of high production cost, scarcity and lack of diversity of 3D face datasets, this paper designs an end-to-end self-supervised learning 3D face reconstruction algorithm with a single 2D face image as input, which only uses 2D face datasets to complete model training. First, the improved ResNet module is introduced to preprocess the input face image. The deep residual neural network has strong feature extraction and characterization ability for the image, which can provide rich high-level semantic feature maps for the subsequent subnetwork. Then, add transformer module completely based on self-attention mechanism to the parameter prediction subnetwork, which can make different parameters of the subnetwork focus on self-related feature map information and avoid interference from invalid feature map information, so as to further improve the parameter prediction accuracy of the subnetwork. Next, training, ablation and comparison experiments were conducted on CelebA, BFM and Photoface datasets, and the combined function of pixel loss function and perceptual loss function was selected as the loss function. The experimental results show that: compared with the historical optimal results of the same network structure, the scale-invariant depth error (SIDE) and mean angle deviation (MAD) are improved by 5.9% and 10.8%, respectively, which strongly proves the effectiveness of the algorithm. Finally, in order to verify the actual effect of the 3D face reconstruction algorithm, examples are selected in this paper for reconstruction. The 3D faces generated by the algorithm all have a good sense of reality, which intuitively and effectively proves the advancement of the algorithm. [ABSTRACT FROM AUTHOR]

Intelligent agriculture has become the development trend of agriculture in the future, and it has a wide range of research and application scenarios. Using machine learning to complete basic tasks for people has become a reality, and this ability is also used in machine vision. In order to save the time in the fruit picking process and reduce the cost of labor, the robot is used to achieve the automatic picking in the orchard environment. Cherry target detection algorithms based on deep learning are proposed to identify and pick cherries. However, most of the existing methods are aimed at relatively sparse fruits and cannot solve the detection problem of small and dense fruits. In this paper, we propose a cherry detection model based on YOLOv5s. First, the shallow feature information is enhanced by convolving the feature maps sampled by two times down in BackBone layer of the original network model to the input end of the second and third CSP modules. In addition, the depth of CSP module is adjusted and RFB module is added in feature extraction stage to enhance feature extraction capability. Finally, Soft- Non-Maximum Suppression (Soft-NMS) is used to minimize the target loss caused by occlusion. We test the performance of the model, and the results show that the improved YOLOv5s-cherry model has the best detection performance for small and dense cherry detection, which is conducive to intelligent picking. [ABSTRACT FROM AUTHOR]

Aiming at the problems of the difficult extraction of small target feature information, complex background, and variable target scale in unmanned aerial vehicle (UAV) aerial photography images. In this paper, an anchor-free target detection algorithm based on fully convolutional one-stage object detection (FCOS) for UAV aerial photography images is proposed. For the problem of complex backgrounds, the global context module is introduced in the ResNet50 network, which is combined with feature pyramid networks (FPN) as the backbone feature extraction network to enhance the feature representation of targets in complex backgrounds. To address the problem of the difficult detection of small targets, an adaptive feature balancing sub-network is designed to filter the invalid information generated at all levels of feature fusion, strengthen multi-layer features, and improve the recognition capability of the model for small targets. To address the problem of variable target scales, complete intersection over union (CIOU) Loss is used to optimize the regression loss and strengthen the model's ability to locate multi-scale targets. The algorithm of this paper is compared quantitatively and qualitatively on the VisDrone dataset. The experiments show that the proposed algorithm improves 4.96% on average precision (AP) compared with the baseline algorithm FCOS, and the detection speed is 35 frames per second (FPS), confirming that the algorithm has satisfactory detection performance, real-time inference speed, and has effectively improved the problem of missed detection and false detection of targets in UAV aerial images. [ABSTRACT FROM AUTHOR]

The performance of underwater target detection algorithms is affected by poor imaging quality in underwater environments. Due to the arithmetic power limitation of underwater devices, existing deep learning networks are unable to provide efficient detection processes with high detection accuracy. Lightweight CNN models have been actively applied for underwater environment detection, yet their lite feature fusion networks cannot provide effective fusion effects and reduce the detection accuracy. In this paper, a lightweight algorithm based on multi-scale feature fusion was proposed, with the model parameters greatly reduced, improving the target detection accuracy. The forward propagation memory overhead is reduced by using multi-scale shared convolutional kernels and pooling operations to co-construct the query matrix in the Tansformer encoding stage. Then, the feature fusion path is optimized in order to enhance the connection of multi-scale features. A multiscale feature adaptive fusion strategy is used to enhance the detection performance and reduce the dependence on the complex feature extraction network. The feature extraction network is also reparameterized to simplify the operation. Using the UPRC offshore dataset for validation, the study results have demonstrated that the statistical mAP metrics validate the detection accuracy. Compared with SSD, RetinaNet and YOLOv5-s improved by 13%, 8.6%, and 0.8%, while the number of parameters decreased by 76.09%, 89.74%, and 87.67%. In addition, compared with the YOLOv5-lite model algorithm with the same parameter volume, the mAP is improved by 3.8%, which verifies the accuracy and efficiency of the algorithm in this paper. [ABSTRACT FROM AUTHOR]

It is difficult to visually detect internal defects in a large transformer with a metal closure. For convenient internal inspection, a micro-robot was adopted, and an inspection method based on an image-enhancement algorithm and an improved deep-learning network was proposed in this paper. Considering the dim environment inside the transformer and the problems of irregular imaging distance and fluctuating supplementary light conditions during image acquisition with the internal-inspection robot, an improved MSRCR algorithm for image enhancement was proposed. It could analyze the local contrast of the image and enhance the details on multiple scales. At the same time, a white-balance algorithm was introduced to enhance the contrast and brightness and solve the problems of overexposure and color distortion. To improve the target recognition performance of complex carbon-trace defects, the SimAM mechanism was incorporated into the Backbone network of the YOLOv8 model to enhance the extraction of carbon-trace features. Meanwhile, the DyHead dynamic detection Head framework was constructed at the output of the YOLOv8 model to improve the perception of local carbon traces with different sizes. To improve the defect target recognition speed of the transformer-inspection robot, a pruning operation was carried out on the YOLOv8 model to remove redundant parameters, realize model lightness, and improve detection efficiency. To verify the effectiveness of the improved algorithm, the detection model was trained and validated with the carbon-trace dataset. The results showed that the MSH-YOLOv8 algorithm achieved an accuracy of 91.80%, which was 3.4 percentage points higher compared to the original YOLOv8 algorithm, and had a significant advantage over other mainstream target-detection algorithms. Meanwhile, the FPS of the proposed algorithm was up to 99.2, indicating that the model computation and model complexity were successfully reduced, which meets the requirements for engineering applications of the transformer internal-inspection robot. [ABSTRACT FROM AUTHOR]

INTRODUCTION: The article discusses the key steps in digital visual design reengineering, with a special emphasis on the importance of information decoding and feature extraction for flat cultural heritage. These processes not only minimize damage to the aesthetic heritage itself but also feature high quality, efficiency, and recyclability. OBJECTIVES: The aim of the article is to explore the issues of gene extraction methods in digital visual design reengineering, proposing a visual gene extraction method through an improved K-means clustering algorithm. METHODS: A visual gene extraction method based on an improved K-means clustering algorithm is proposed. Initially analyzing the digital visual design reengineering process, combined with a color extraction method using the improved JSO algorithm-based K-means clustering algorithm, a gene extraction and clustering method for digital visual design reengineering is proposed and validated through experiments. .ASA-RESULT: The results show that the proposed method improves the accuracy, robustness, and real-time performance of clustering. Through comparative analysis with Dunhuang murals, the effectiveness of the color extraction method based on the K-means-JSO algorithm in the application of digital visual design reengineering is verified. The method based on the K-means-GWO algorithm performs best in terms of average clustering time and standard deviation. The optimization curve of color extraction based on the K-means-JSO algorithm converges faster and with better accuracy compared to the K-means-ABC, K-means-GWO, K-means-DE, K-means-CMAES, and K-means-WWCD algorithms. CONCLUSION: The color extraction method of the K-means clustering algorithm improved by the JSO algorithm proposed in this paper solves the problems of insufficient standardization in feature selection, lack of generalization ability, and inefficiency in visual gene extraction methods. [ABSTRACT FROM AUTHOR]

In recent years, deep learning has found widespread application in SAR image object detection. However, when detecting multi-scale targets against complex backgrounds, these models often struggle to strike a balance between accuracy and speed. Furthermore, there is a continuous need to enhance the performance of current models. Hence, this paper proposes LRMSNet, a new multi-scale target detection model designed specifically for SAR images in complex backgrounds. Firstly, the paper introduces an attention module designed to enhance contextual information aggregation and capture global features, which is integrated into a backbone network with an expanded receptive field for improving SAR image feature extraction. Secondly, this paper develops an information aggregation module to effectively fuse different feature layers of the backbone network. Lastly, to better integrate feature information at various levels, this paper designs a multi-scale aggregation network. We validate the effectiveness of our method on three different SAR object detection datasets (MSAR-1.0, SSDD, and HRSID). Experimental results demonstrate that LRMSNet achieves outstanding performance with a mean average accuracy (mAP) of 95.2%, 98.9%, and 93.3% on the MSAR-1.0, SSDD, and HRSID datasets, respectively, with only 3.46 M parameters and 12.6 G floating-point operation cost (FLOPs). When compared with existing SAR object detection models on the MSAR-1.0 dataset, LRMSNet achieves state-of-the-art (SOTA) performance, showcasing its superiority in addressing SAR detection challenges in large-scale complex environments and across various object scales. [ABSTRACT FROM AUTHOR]

Advances in computer image recognition have significantly impacted many industries, including healthcare, security and autonomous systems. This paper aims to explore the potential of improving image algorithms to enhance computer image recognition. Specifically, we will focus on regression methods as a means to improve the accuracy and efficiency of identifying images. In this study, we will analyze various regression techniques and their applications in computer image recognition, as well as the resulting performance improvements through detailed examples and data analysis. This paper deals with the problems related to visual image processing in outdoor unstructured environment. Finally, the heterogeneous patterns are converted into the same pattern, and the heterogeneous patterns are extracted from the fusion features of data modes. The simulation results show that the perception ability and recognition ability of outdoor image recognition in complex environment are improved. [ABSTRACT FROM AUTHOR]

In order to effectively protect and verify the copyright information of multimedia digital works, this paper proposes a zero-watermarking algorithm based on carrier image feature point descriptors. The constructed feature matrix of this algorithm consists of two parts: the feature descriptor vector calculated from scale-invariant feature reconstruction transform (SIFRT) and the multi-radius local binary pattern (MrLBP) descriptor vector. The algorithm performs a standardization, feature decomposition, and redundancy reduction on the traditional keypoint descriptor matrix, combines it with the texture feature matrix, and achieves the dimensional matching of copyright information. The advantage of this algorithm lies in its non-modification of the original data. Compared to computing global features, the local features computed from a subset of key points reduce the amount of attack interference introduced during copyright verification, thereby reducing the number of erroneous pixel values that are introduced. The algorithm introduces a timestamp mechanism when uploading the generated zero-watermarking image to a third-party copyright center, preventing subsequent tampering. Experimental data analysis demonstrates that the algorithm exhibits good discriminability, security, and robustness. [ABSTRACT FROM AUTHOR]

Object detection is one of the core technologies for autonomous driving. Current road object detection mainly relies on visible light, which is prone to missed detections and false alarms in rainy, night-time, and foggy scenes. Multispectral object detection based on the fusion of RGB and infrared images can effectively address the challenges of complex and changing road scenes, improving the detection performance of current algorithms in complex scenarios. However, previous multispectral detection algorithms suffer from issues such as poor fusion of dual-mode information, poor detection performance for multi-scale objects, and inadequate utilization of semantic information. To address these challenges and enhance the detection performance in complex road scenes, this paper proposes a novel multispectral object detection algorithm called MRD-YOLO. In MRD-YOLO, we utilize interaction-based feature extraction to effectively fuse information and introduce the BIC-Fusion module with attention guidance to fuse different modal information. We also incorporate the SAConv module to improve the model's detection performance for multi-scale objects and utilize the AIFI structure to enhance the utilization of semantic information. Finally, we conduct experiments on two major public datasets, FLIR_Aligned and M3FD. The experimental results demonstrate that compared to other algorithms, the proposed algorithm achieves superior detection performance in complex road scenes. [ABSTRACT FROM AUTHOR]

This paper proposes a new algorithm composition network from the perspective of machine learning, based on an in-depth study of related literature. At the same time, this paper examines the characteristics of music and develops a model for recognising musical emotions. Using the model's information entropy of pitch and intensity to extract the main melody track, note features are extracted from bar features. Finally, the cosine of the vector included angle is used to judge the similarity between feature vectors of several adjacent sections, allowing the music to be divided into several independent segments. The emotional model of music is used to analyze each segment's emotion. By quantifying music features, this paper classifies and quantifies music emotion based on the mapping relationship between music features and emotion. Music emotion can be accurately identified by the model. The model's emotion recognition accuracy is up to 93.78 percent, and the algorithm's recall rate is up to 96.3 percent, according to simulation results. The recognition method used in this paper has a higher recognition ability than other methods, and the emotion recognition result is more reliable. This paper can not only meet the composer's auxiliary creative needs, but it can also help intelligent music services. [ABSTRACT FROM AUTHOR]

Aiming at the problem of motion blur in the inspection image of wind power generation equipment, an improved fast motion blur removal method based on deblurganv2 is proposed in this paper. Firstly, according to the characteristics of disparate local motion blur degrees and different global motion blur directions of the wind power inspection image, the real wind power fuzzy image data set is collected and produced. Secondly, according to the characteristics of the single background of the wind power inspection image and the requirements of fast and effective processing, the lightweight network Ghostnet is redesigned as the backbone network of the Deblurganv2 generator to reduce the number of network parameters and calculations. Finally, five SE channel attention mechanism layers are added to GhostNet to strengthen feature extraction, and the upsampling process is optimized through bilinear interpolation, to improve the deblurring performance of the wind power inspection image. The experimental results show that compared with other algorithms, the proposed algorithm has a higher peak signal‐to‐noise ratio and structural similarity, the network model parameters are compressed to 6.1 MB, and the reasoning speed is improved to 0.42 s. [ABSTRACT FROM AUTHOR]

Infrared images have good anti-environmental interference ability and can capture hot target information well, but their pictures lack rich detailed texture information and poor contrast. Visible image has clear and detailed texture information, but their imaging process depends more on the environment, and the quality of the environment determines the quality of the visible image. This paper presents an infrared image and visual image fusion algorithm based on deep learning. Two identical feature extractors are used to extract the features of visible and infrared images of different scales, fuse these features through specific fusion methods, and restore the features of visible and infrared images to the pictures through the feature restorer to make up for the deficiencies in the various photos of infrared and visible images. This paper tests infrared visual images, multi-focus images, and other data sets. The traditional image fusion algorithm is compared several with the current advanced image fusion algorithm. The experimental results show that the image fusion method proposed in this paper can keep more feature information of the source image in the fused image, and achieve excellent results in some image evaluation indexes. [ABSTRACT FROM AUTHOR]

In the traditional text detection process, the text area of the small receptive field in the video image is easily ignored, the features that can be extracted are few, and the calculation is large. These problems are not conducive to the recognition of text information. In this paper, a lightweight network structure on the basis of the EAST algorithm, the Convolution Block Attention Module (CBAM), is proposed. It is suitable for the spatial and channel hybrid attention module of text feature extraction of the natural scene video images. The improved structure proposed in this paper can obtain deep network features of text and reduce the computation of text feature extraction. Additionally, a hybrid feature pyramid + BLSTM network is designed to improve the attention to the small acceptance domain text regions and the text sequence features of the region. The test results on the ICDAR2015 demonstrate that the improved construction can effectively boost the attention of small acceptance domain text regions and improve the sequence feature detection accuracy of small acceptance domain of long text regions without significantly increasing computation. At the same time, the proposed network constructions are superior to the traditional EAST algorithm and other improved algorithms in accuracy rate P, recall rate R, and F-value. [ABSTRACT FROM AUTHOR]

Collecting and analyzing data from all devices to improve the efficiency of business processes is an important task of Industrial Internet of Things (IIoT). In the age of data explosion, extensive text data generated by the IIoT have given birth to a variety of text representation methods. The task of text representation is to convert the natural language to a form that computer can understand with retaining the original semantics. However, these methods are difficult to effectively extract the semantic features among words and distinguish polysemy in natural language. Combining the advantages of convolutional neural network (CNN) and variational autoencoder (VAE), this paper proposes an intelligent CNN-VAE text representation algorithm as an advanced learning method for social big data within next-generation IIoT, which help users identify the information collected by sensors and perform further processing. This method employs the convolution layer to capture the local features of the context and uses the variational technique to reconstruct feature space to make it conform to the normal distribution. In addition, the improved word2vec model based on topical word embedding (TWE) is utilized to add topical information to word vectors to distinguish polysemy. This paper takes the social big data as an example to illustrate the way of the proposed algorithm applied in the next-generation IIoT and utilizes Cnews dataset to verify the performance of proposed method with four evaluating metrics (i.e., recall, accuracy, precision, and F1-score). Experimental results indicate that the proposed method outperforms word2vec-avg and CNN-AE in K-nearest neighbor (KNN), random forest (RF), and support vector machine (SVM) classifiers and distinguishes polysemy effectively. [ABSTRACT FROM AUTHOR]

Copyright of Fire Ecology is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The traditional rearview mirror method cannot fully guarantee safety when driving trucks. RGB and infrared images collected by cameras are used for registration and recognition, so as to achieve the perception of surroundings and ensure safe driving. The traditional scale-invariant feature transform (SIFT) algorithm has a mismatching rate, and the YOLO algorithm has an optimization space in feature extraction. To address these issues, this paper proposes a truck surround sensing technique based on multi-features and an improved YOLOv5 algorithm. Firstly, the edge corner points and infrared features of the preset target region are extracted, and then a feature point set containing the improved SIFT algorithm is generated for registration. Finally, the YOLOv5 algorithm is improved by fusing infrared features and introducing a composite prediction mechanism at the prediction end. The simulation results show that, on average, the image stitching accuracy is improved by 17%, the time is reduced by 89%, and the target recognition accuracy is improved by 2.86%. The experimental results show that this method can effectively perceive the surroundings of trucks, accurately identify targets, and reduce the missed alarm rate and false alarm rate. [ABSTRACT FROM AUTHOR]

To address the issues of poor detection accuracy and the large number of target detection model parameters in existing AGV monocular vision location detection algorithms, this paper presents an AGV vision location method based on Gaussian saliency heuristic. The proposed method introduces a fast and accurate AGV visual detection network called GAGV-net. In the GAGV-net network, a Gaussian saliency feature extraction module is designed to enhance the network's feature extraction capability, thereby reducing the required output for model fitting. To improve the accuracy of target detection, a joint multi-scale classification and detection task header are designed at the stage of target frame regression to classification. This header utilizes target features of different scales, thereby enhancing the accuracy of target detection. Experimental results demonstrate a 12% improvement in detection accuracy and a 27.38 FPS increase in detection speed compared to existing detection methods. Moreover, the proposed detection network significantly reduces the model's size, enhances the network model's deployability on AGVs, and greatly improves detection accuracy. [ABSTRACT FROM AUTHOR]

High-altitude work poses significant safety risks, and wearing safety belts is crucial to prevent falls and ensure worker safety. However, manual monitoring of safety belt usage is time consuming and prone to errors. In this paper, we propose an improved high-altitude safety belt detection algorithm based on the YOLOv8 model to address these challenges. Our paper introduces several improvements to enhance its performance in detecting safety belts. First, to enhance the feature extraction capability, we introduce a BiFormer attention mechanism. Moreover, we used a lightweight upsampling operator instead of the original upsampling layer to better preserve and recover detailed information without adding an excessive computational burden. Meanwhile, Slim-neck was introduced into the neck layer. Additionally, extra auxiliary training heads were incorporated into the head layer to enhance the detection capability. Lastly, to optimize the prediction of bounding box position and size, we replaced the original loss function with MPDIOU. We evaluated our algorithm using a dataset collected from high-altitude work scenarios and demonstrated its effectiveness in detecting safety belts with high accuracy. Compared to the original YOLOv8 model, the improved model achieves P (precision), R (recall), and mAP (mean average precision) values of 98%, 91.4%, and 97.3%, respectively. These values represent an improvement of 5.1%, 0.5%, and 1.2%, respectively, compared to the original model. The proposed algorithm has the potential to improve workplace safety and reduce the risk of accidents in high-altitude work environments. [ABSTRACT FROM AUTHOR]

As an important part of the power system, it is necessary to ensure the safe and stable operation of transmission lines. Due to long-term exposure to the outdoors, the lines face many insecurity factors, and foreign object intrusion is one of them. Traditional foreign object (bird's nest, kite, balloon, trash bag) detection algorithms suffer from low efficiency, poor accuracy, and small coverage, etc. To address the above problems, this paper introduces the RCDAM-Net. In order to prevent feature loss or useful feature compression, the RevCol (Reversible Column Networks) is used as the backbone network to ensure that the total information remains unchanged during feature decoupling. DySnakeConv (Dynamic Snake Convolution) is adopted and embedded into the C2f structure, which is named C2D and integrates low-level features and high-level features. Compared to the original BottleNeck structure of C2f, the DySnakeConv enhances the feature extraction ability for elongated and weak targets. In addition, MPDIoU (Maximum Performance Diagonal Intersection over Union) is used to improve the regression performance of model bounding boxes, solving the problem of predicted bounding boxes having the same aspect ratio as true bounding boxes, but with different values. Further, we adopt Decoupled Head for detection and add additional auxiliary training heads to improve the detection accuracy of the model. The experimental results show that the model achieves mAP50, Precision, and Recall of 97.98%, 98.15%, and 95.16% on the transmission tower line foreign object dataset, which is better to existing multi-target detection algorithms. [ABSTRACT FROM AUTHOR]

With the sustainable development of intelligent fisheries, accurate underwater fish segmentation is a key step toward intelligently obtaining fish morphology data. However, the blurred, distorted and low-contrast features of fish images in underwater scenes affect the improvement in fish segmentation accuracy. To solve these problems, this paper proposes a method of underwater fish segmentation based on an improved PSPNet network (IST-PSPNet). First, in the feature extraction stage, to fully perceive features and context information of different scales, we propose an iterative attention feature fusion mechanism, which realizes the depth mining of fish features of different scales and the full perception of context information. Then, a SoftPool pooling method based on fast index weighted activation is used to reduce the numbers of parameters and computations while retaining more feature information, which improves segmentation accuracy and efficiency. Finally, a triad attention mechanism module, triplet attention (TA), is added to the different scale features in the golden tower pool module so that the space attention can focus more on the specific position of the fish body features in the channel through cross-dimensional interaction to suppress the fuzzy distortion caused by background interference in underwater scenes. Additionally, the parameter-sharing strategy is used in this process to make different scale features share the same learning weight parameters and further reduce the numbers of parameters and calculations. The experimental results show that the method presented in this paper yielded better results for the DeepFish underwater fish image dataset than other methods, with 91.56% for the Miou, 46.68 M for Params and 40.27 G for GFLOPS. In the underwater fish segmentation task, the method improved the segmentation accuracy of fish with similar colors and water quality backgrounds, improved fuzziness and small size and made the edge location of fish clearer. [ABSTRACT FROM AUTHOR]

The ridge beast is a beast placed on the ridge of the roof of ancient Chinese buildings, not only has a decorative function, and has a strict hierarchical meaning, the number and form of the ridge beast placed on different levels of buildings are strictly limited. The detection technology of ridge beast decorative parts has important application value in the fields of fine 3D reconstruction of ancient buildings, historical dating and cultural and tourism services. Aiming at the problem of poor detection performance of traditional detection algorithms due to high texture similarity and poor discrimination of ridge beast, this paper proposed an improved YOLOv3 based detection algorithm for ridge beast decorative pieces. In terms of basic network improvement, local features are aggregated to the deep separable convolution internal embedding summation layer, and point convolution is used to connect the channel information of original features and aggregated features, so as to expand the receptive field and learn more diverse features. The residual structure of the feature extraction network was constructed by using the convolution, and the extraction effect of the model on the fine-grained features of the ridge beast was optimized, so that the detection accuracy was improved. In the prediction head improvement of the model, the original linear structure was reconstructed, and the extrusion and excitation modules were introduced to model the channel relationship of multi-scale feature map, which suppressed the response of interference signals and made the feature more directivity. The parallel 1 × 1 and 3 × 3 convolution are used to construct a multi-size convolution structure, which enhances the semantic information extraction ability of the model and further improves the detection effect. Experiments were conducted on the constructed ridge-beast dataset, and the results showed that the mAP of the improved algorithm can reach 86.48%, which is 3.05% higher than YOLO-v3, and the model parameters are reduced by 70%, which has a better detection performance and can provide a reference for the automated detection of ancient building components. [ABSTRACT FROM AUTHOR]

Aiming at the intrinsic aspect that the weak features of the early fault information of rolling bearings are not easy to extract, a parameter Adaptive Variational Modal Decomposition (AVMD) based algorithm is proposed for bearing fault signal feature extraction. Since the number of Variational Modal Decomposition (VMD) decomposition and penalty factor play an important role in VMD decomposition effect, the irregularities in the selection of these two influencing parameters are analyzed. We exploit the stronger global search capability of the improved sparrow search algorithm (LSSA) for adaptive parameter selection of the VMD algorithm. In this paper, the Levy flight algorithm is introduced and chaos is added to initialize sparrow population position to prevent sparrow from falling into the disadvantage of local optimum in the search process. In addition, this paper also combines the maximum kurtosis index, the minimum envelope entropy index and the number of iterations of VMD to form the objective function of the LSSA. The VMD algorithm with optimized parameters decomposes the signal to be measured, the decomposed IMFs was reconstructed, finally the validity of the model was verified by calculating 20 features (time domain and frequency domain) of the reconstructed signal as the input vector of the SVM classifier. Finally, the feasibility of this model in fault diagnosis of rolling bearing is verified using simulation and example experiments. [ABSTRACT FROM AUTHOR]

When performing robotic automatic sorting and assembly operations of multi-category hardware, there are some problems with the existing convolutional neural network visual recognition algorithms, such as large computing power consumption, low recognition efficiency, and a high rate of missed detection and false detection. A novel efficient convolutional neural algorithm for multi-category aliasing hardware recognition is proposed in this paper. On the basis of SSD, the novel algorithm uses Resnet-50 instead of VGG16 as the backbone feature extraction network, and it integrates ECA-Net and Improved Spatial Attention Block (ISAB): two attention mechanisms to improve the ability of learning and extract target features. Then, we pass the weighted features to extra feature layers to build an improved SSD algorithm. At last, in order to compare the performance difference between the novel algorithm and the existing algorithms, three kinds of hardware with different sizes are chosen to constitute an aliasing scene that can simulate an industrial site, and some comparative experiments have been completed finally. The experimental results show that the novel algorithm has an mAP of 98.20% and FPS of 78, which are better than Faster R-CNN, YOLOv4, YOLOXs, EfficientDet-D1, and original SSD in terms of comprehensive performance. The novel algorithm proposed in this paper can improve the efficiency of robotic sorting and assembly of multi-category hardware. [ABSTRACT FROM AUTHOR]

In view of the issue that the features of the images in the shallow layer cannot be fully utilized when the image description is generated and the target association of the image cannot be sufficiently obtained, a generation method for the description of the acquisition of attention images is put forward in this paper. The proportions of the features of images at various depths are autonomously assigned based on the content data of the language model, and the images thus generated are all pictures with image features with attention. In this way, the effect of description generation of images has been improved. After the testing of the database, the results indicate that the calculation method of the algorithm put forward in this paper is more accurate than the top-down multimedia image algorithm generated by a single attention. [ABSTRACT FROM AUTHOR]

How to strengthen emergency management and improve the ability to prevent and respond to emergencies is an important part of building a harmonious socialist society. This paper proposes a domain emotion dictionary construction method for network public opinion analysis of public emergencies. Using the advantages of corpus and semantic knowledge base, this paper extracts the seed words based on the large-scale network public opinion corpus and combined with the existing emotion dictionary, trains the word vector through the word2vec model in deep learning, expands the emotion words, and obtains the candidate emotion words according to the semantic similarity calculation, So as to generate a domain emotion dictionary. The accuracy rate of emotion discrimination by the emotion dictionary constructed in this paper is 0.86, the recall rate is 0.92. Through the verification of accuracy and recall rate, the construction method proposed in this paper has good accuracy and reliability. Because of the great differences in different experiences and situations of different groups, there will be great differences in views and perspectives on the same event. The key to prevent the public from blindly following the crowd should be to reach groups close to emotional distance, and targeted prevention and control of public opinion can be conducted according to different characteristics of different groups. [ABSTRACT FROM AUTHOR]

Detecting small targets and handling target occlusion and overlap are critical challenges in weld defect detection. In this paper, we propose the S-YOLO model, a novel weld defect detection method based on the YOLOv8-nano model and several mathematical techniques, specifically tailored to address these issues. Our approach includes several key contributions. Firstly, we introduce omni-dimensional dynamic convolution, which is sensitive to small targets, for improved feature extraction. Secondly, the NAM attention mechanism enhances feature representation in the region of interest. NAM computes the channel-wise and spatial-wise attention weights by matrix multiplications and element-wise operations, and then applies them to the feature maps. Additionally, we replace the SPPF module with a context augmentation module to improve feature map resolution and quality. To minimize information loss, we utilize Carafe upsampling instead of the conventional upsampling operations. Furthermore, we use a loss function that combines IoU, binary cross-entropy, and focal loss to improve bounding box regression and object classification. We use stochastic gradient descent (SGD) with momentum and weight decay to update the parameters of our model. Through rigorous experimental validation, our S-YOLO model demonstrates outstanding accuracy and efficiency in weld defect detection. It effectively tackles the challenges of small target detection, target occlusion, and target overlap. Notably, the proposed model achieves an impressive 8.9% improvement in mean Average Precision (mAP) compared to the native model. [ABSTRACT FROM AUTHOR]

The detection algorithm commonly misses obscured pedestrians in traffic scenes with a high pedestrian density because mutual occlusion among pedestrians reduces the prediction box score of the concealed pedestrians. The paper uses the YOLOv7 algorithm as the baseline and makes the following three improvements by investigating the variables influencing the detection method's performance: First, the backbone network of the YOLOv7 algorithm is replaced with the lightweight feature extraction network Mobilenetv3 since the pedestrian detection algorithm frequently needs to be deployed in driverless mobile, which requires a fast operating speed of the algorithm; second, a high-resolution feature pyramid structure is suggested for the issue of missed detection of hidden pedestrians, which upscales the feature maps generated from the feature pyramid to increase the resolution of the output feature maps and introduces shallow feature maps to strengthen the distinctions between adjacent sub-features to enhance the network's ability to extract features for the visible area of hidden pedestrians and small-sized pedestrians in order to produce deeper features with greater differentiation for pedestrians; and the third is to suggest a detection head based on an attention mechanism that is employed to lower the confidence level of target neighboring sub-features, lower the quantity of redundant detection boxes, and lower the following NMS computation. The mAP of the suggested approach in this work achieves 89.75%, which is 9.5 percentage points better than the YOLOv7 detection algorithm, according to experiments on the CrowdHuman pedestrian-intensive dataset. The algorithm proposed in this paper can considerably increase the detection performance of the detection algorithm, particularly for obscured pedestrians and small-sized pedestrians in the dataset, according to the experimental effect plots. [ABSTRACT FROM AUTHOR]

With the wave of artificial intelligence and deep learning sweeping the world, there are many algorithms based on deep learning for image defog research. However, there is still serious color distortion, contrast reduction, incomplete fog removal, and other problems. To solve these problems, this paper proposes an improved image defogging network based on the traditional cycle-consistent adversarial network. We add the self-attention module and atrous convolution multi-scale feature fusion module on the basis of the traditional CycleGAN network to enhance the feature extraction capability of the network. The perceptual loss function is introduced into the loss function of the model to enhance the texture sense of the generated image. Finally, by comparing several typical defogging algorithms, the superiority of the defogging model proposed in this paper is proved qualitatively and quantitatively. Among them, on the indoor synthetic data set, the Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity Index Measurement (SSIM) of the network designed by us can reach 23.22 and 0.8809, respectively. On the outdoor synthetic data set, the PSNR and SSIM of our designed network can be as high as 25.72 and 0.8859, respectively. On the real data set, the PSNR and SSIM of our designed network can reach 21.02 and 0.8166, respectively. It is proved that the defogging network in this paper has good practicability and universality. [ABSTRACT FROM AUTHOR]

Image denoising, as an essential component of image pre-processing, effectively reduces noise interference to enhance image quality, a factor of considerable research importance. Traditional denoising methods often lead to the blurring of image details and a lack of realism at the image edges. To deal with these issues, we propose an image denoising algorithm named Residual structure and Cooperative Attention mechanism based on Generative Adversarial Networks (RCA-GAN). This algorithm proficiently reduces noise while focusing on preserving image texture details. To maximize feature extraction, this model first employs residual learning within a portion of the generator's backbone, conducting extensive multi-dimensional feature extraction to preserve a greater amount of image details. Secondly, it introduces a simple yet efficient cooperative attention module to enhance the representation capacity of edge and texture features, further enhancing the preservation of intricate image details. Finally, this paper constructs a novel loss function—the Multimodal Loss Function—for the network training process. The experimental results were evaluated using Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity (SSIM) as evaluation metrics. The experimental results demonstrate that the proposed RCA-GAN image denoising algorithm has increased the average PSNR from 24.71 dB to 33.76 dB, achieving a 36.6% improvement. Additionally, the average SSIM value has risen from 0.8451 to 0.9503, indicating a 12.4% enhancement. It achieves superior visual outcomes, showcasing the ability to preserve image texture details to a greater extent and excel in edge preservation and noise suppression. [ABSTRACT FROM AUTHOR]

This paper proposes a multimodal fusion 3D target detection algorithm based on the attention mechanism to improve the performance of 3D target detection. The algorithm utilizes point cloud data and information from the camera. For image feature extraction, the ResNet50 + FPN architecture extracts features at four levels. Point cloud feature extraction employs the voxel method and FCN to extract point and voxel features. The fusion of image and point cloud features is achieved through regional point fusion and voxel fusion methods. After information fusion, the Coordinate and SimAM attention mechanisms extract fusion features at a deep level. The algorithm's performance is evaluated using the DAIR-V2X dataset. The results show that compared to the Part-A2 algorithm; the proposed algorithm improves the mAP value by 7.9% in the BEV view and 7.8% in the 3D view at IOU = 0.5 (cars) and IOU = 0.25 (pedestrians and cyclists). At IOU = 0.7 (cars) and IOU = 0.5 (pedestrians and cyclists), the mAP value of the SECOND algorithm is improved by 5.4% in the BEV view and 4.3% in the 3D view, compared to other comparison algorithms. [ABSTRACT FROM AUTHOR]

Small target features are difficult to distinguish and identify in an environment with complex backgrounds. The identification and extraction of multi-dimensional features have been realized due to the rapid development of deep learning, but there are still redundant relationships between features, reducing feature recognition accuracy. The YOLOv5 neural network is used in this paper to achieve preliminary feature extraction, and the minimum redundancy maximum relevance algorithm is used for the 512 candidate features extracted in the fully connected layer to perform de-redundancy processing on the features with high correlation, reducing the dimension of the feature set and making small target feature recognition a reality. Simultaneously, by pre-processing the image, the feature recognition of the pre-processed image can be improved. Simultaneously, by pre-processing the image, the feature recognition of the pre-processed image can significantly improve the recognition accuracy. The experimental results demonstrate that using the minimum redundancy maximum relevance algorithm can effectively reduce the feature dimension and identify small target features. [ABSTRACT FROM AUTHOR]

Chip pad inspection is of great practical importance for chip alignment inspection and correction. It is one of the key technologies for automated chip inspection in semiconductor manufacturing. When applying deep learning methods for chip pad inspection, the main problem to be solved is how to ensure the accuracy of small target pad detection and, at the same time, achieve a lightweight inspection model. The attention mechanism is widely used to improve the accuracy of small target detection by finding the attention region of the network. However, conventional attention mechanisms capture feature information locally, which makes it difficult to effectively improve the detection efficiency of small targets from complex backgrounds in target detection tasks. In this paper, an OCAM (Object Convolution Attention Module) attention module is proposed to build long-range dependencies between channel features and position features by constructing feature contextual relationships to enhance the correlation between features. By adding the OCAM attention module to the feature extraction layer of the YOLOv5 network, the detection performance of chip pads is effectively improved. In addition, a design guideline for the attention layer is proposed in the paper. The attention layer is adjusted by network scaling to avoid network characterization bottlenecks, balance network parameters, and network detection performance, and reduce the hardware device requirements for the improved YOLOv5 network in practical scenarios. Extensive experiments on chip pad datasets, VOC datasets, and COCO datasets show that the approach in this paper is more general and superior to several state-of-the-art methods. [ABSTRACT FROM AUTHOR]

The trajectory data of aircraft, ships, and so on, can be analyzed to obtain valuable information. Clustering is the basic technology of trajectory analysis, and the feature extraction process is one of the decisive factors for clustering performance. Trajectory features can be divided into two categories: spatial features and temporal features. In mainstream algorithms, spatial features are represented by latitude and longitude coordinates. However, such algorithms are only suitable for trajectories where spatial features are tightly coupled with latitude and longitude. When the same types of trajectories are in different latitude and longitude ranges or there are transformations such as rotation, scaling, and so on, this kind of algorithm is infeasible. Therefore, this paper proposes a spatio-temporal feature trajectory clustering algorithm based on deep learning. In this algorithm, the extraction process of the trajectory spatial shape feature is designed based on image matching technology, and the extracted spatial features are combined with the trajectory temporal features to improve the clustering performance. The experimental results on simulated and real datasets show that the algorithm can effectively extract the trajectory spatial shape features and that the clustering effect of the fused spatio-temporal feature is better than that of a single feature. [ABSTRACT FROM AUTHOR]

In industrial aluminum sheet surface defect detection, false detection, missed detection, and low efficiency are prevalent challenges. Therefore, this paper introduces an improved YOLOv8 algorithm to address these issues. Specifically, the C2f-DSConv module incorporated enhances the network's feature extraction capabilities, and a small target detection layer (160 x 160) improves the recognition of small targets. Besides, the DyHead dynamic detection head augments target representation, and MPDIoU replaces the regression loss function to refine detection accuracy. The improved algorithm is named YOLOv8n-DSDM, with experimental evaluations on an industrial aluminum sheet surface defect dataset demonstrating its effectiveness. YOLOv8n-DSDM achieves an average mean average precision (mAP50%) of 94.7%, demonstrating a 3.5% improvement over the original YOLOv8n. With a single-frame detection time of 2.5 ms and a parameter count of 3.77 M, YOLOv8n-DSDM meets the realtime detection requirements for industrial applications. [ABSTRACT FROM AUTHOR]