Search

Visual SLAM algorithms can obtain a large amount of texture information from the environment and usually perform very well in static scenes, but there are a large number of irregular dynamic points when running in dynamic scenes, which can lead to increased error in SLAM feature point matching and loss of tracking localization. To address this challenge this paper proposes a SLAM system (YVG‐SLAM) that adapts to dynamic scenes. YVG‐SLAM is an improvement on the ORB‐SLAM3 algorithm, integrating the view geometry algorithm and the current powerful YOLOv5 algorithm, while proposing a dynamic feature removal strategy without a priori assumptions to reduce the influence of dynamic targets. In this paper, we first lighten the YOLOv5 algorithm, then process the image frame to get the bounding box, then use the view geometry algorithm to determine the dynamic feature points on the image frame, and finally remove the moving objects in the image frame according to the dynamic feature recognition strategy proposed in this paper. The performance of the algorithm is tested on the TUM RGB‐D and BONN RGB‐D datasets. The experimental results show that the robustness of the proposed algorithm on most video sequences is better than the existing SLAM algorithms dealing with dynamic scenes such as Detect‐SLAM and DynaSLAM, and the RMSE index of the absolute trajectory error measured on high‐speed dynamic video sequences can be significantly reduced by more than 93% compared to ORB‐SLAM3. © 2024 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

YOLOv7 is one of the most effective algorithms for one‐stage detectors. However, when it is applied to pedestrian detection tasks in the industrial scene, it is still challenging for complex environments and multi‐scale changes of pedestrians. This paper proposes a new pedestrian detector for the industrial scene based on improved YOLOv7‐tiny and named as GP‐YOLO. First, the neck of YOLOv7‐tiny is replaced by RepGFPN structure, make full use of multi‐scale features to enhance the detection accuracy of objects with large‐scale changes. Second, a new gnconv branch is added to the feature fusion module, and the high‐order spatial interaction capability is introduced to further enhance the target detection accuracy. Finally, a lightweight method based on PModule is proposed, on this basis, a PConv bottleneck is designed to reduce the FLOPs and enhance the feature extraction. Experiments on a self‐made Industrial Pedestrian Data set show that before lightweight, the proposed algorithm achieves a 3.2% improvement in mAP@0.5:0.95 and a 3.7% improvement in Recall compared to the baseline YOLOv7‐tiny. After lightweight GP‐YOLO, compared to non‐lightweight, parameters and FLOPs are decreased by 26% and 23%, respectively, the mAP@0.5:0.95 is decreased by only 1.1% and the Recall is decreased by only 1.3%, which remains at a high level. Compared with baseline YOLOv7‐tiny, the lightweight GP‐YOLO has similar parameters and FLOPs, but the mAP@0.5:0.95 is increased by 2.1%, and the Recall is increased by 2.4%. © 2024 Institute of Electrical Engineers of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Research on global harmonic mitigation against distributed and high‐proportioned nonlinear loads in modern distribution networks has received extensive attention. In this paper, a distributed compensation method for active power filters (APFs) is proposed, which utilizes a small number of APFs with adjustable reference to alleviate the global voltage distortion caused by a large number of distributed nonlinear loads. The model predictive control (MPC) is employed to calculate the optimal current reference for compensators at each optimization moment by predicting the system's performance in a certain future time period. Furthermore, the Kalman filter (KF) algorithm is used to estimate the initial harmonic voltage for the MPC, reducing the unfavorable effects of the model uncertainty and measurement noise. The test results based on a seven‐bus distribution network in MATLAB are provided to verify the effectiveness of the proposed method. © 2023 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

In this paper, a new dual mode blind equalization method using neighborhood symbol‐based decision and decision‐directed (NSBD‐DD) algorithm is proposed to equalize the satellite communication signals. The proposed algorithm adopts the combined cost function to employ the advantages of symbol decision algorithm and the decision‐directed algorithm, which can further improve the universality of the proposed algorithm. Compared with the conventional blind equalization algorithm, the compensation ability of intersymbol interference and convergence speed of the proposed algorithm can be improved simultaneously. To verify the performance of the proposed algorithm, the computer simulation is performed, and the simulation results show that the residual intersymbol interference of the 64QAM signals can be decreased to −50 dB under the satellite channel, which has 30 dB lower than multi‐modulus algorithm (MMA), 26 dB lower than NSBD algorithm, and 10 dB lower than SBD algorithm. And compared with SBD algorithm, the number of iterations required for the NSBD‐DD algorithm can be decreased from 8000 iterations to 6000 iterations, which convergence speed is increased by 25%. © 2023 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Objective. On the basis of inheriting the classical aesthetic orientation of Japanese literature, contemporary Japanese literature changes the creative methods of traditional Japanese writers, strives to transcend the national limitations of Japanese literature, and strives to capture literary materials with a "modern feel." Combined with modern western literary techniques to express the "modern self," and integrating popular literature with pure literature, Japanese writers created a "healing" literature that is popular all over the world. There is some value in exploring the correlation between Japanese literature and the influence of psychotherapy. Method. In this paper, an equation diagnosis algorithm based on iterative learning for a class of linear discrete systems is studied, and the existing discrete iterative learning diagnostics are improved. We exchange the order of time domain and iterative domain to achieve the purpose of point-by-point equation diagnosis. On this basis, a virtual influence initial value estimation algorithm with a sliding window is proposed. The impact that has not been diagnosed is estimated and used as the initial value of the impact, so as to reduce the number of iterations and improve the efficiency of equation diagnosis. This paper takes the public and readers as different perspectives, based on the use and satisfaction theory and prospect theory, and uses interviews and questionnaires to study the communication effect of Japanese literature from the three dimensions of cognition, emotion, and behavior. The cognitive part includes the public's understanding and readers' understanding and reading; the emotional part includes the public's and readers' impressions and emotional attitudes; the behavioral part includes the public's reading situation and readers' behavior changes. Results/Discussion. In the survey of loyal readers, although readers' understanding of Japanese literature has improved compared with the general public, it is not high, and their liking and influence on behavior are slightly lower than the preset level. This paper believes that the existing problems of Japanese literature dissemination are mainly concentrated in three aspects: the market is somewhat biased, which narrows the cognitive scope of users; as a cross-cultural literary work, Japanese literature still makes readers feel that it exists; there is some sense of estrangement, which will affect their enjoyment in reading; as a niche interest, readers lack timely communication and sharing objects after reading, so it is difficult to enhance their sense of identity. [ABSTRACT FROM AUTHOR]

Obstructive sleep apnea (OSA) is a common sleep disorder and is diagnosed by polysomnography (PSG) as the gold standard. However, PSG is a time‐consuming and costly test, and patients have to endure long waits before receiving a PSG test in a hospital. In view of this, portable and wearable screening tools for OSA prediction have been developed recently as a low‐cost and easy‐to‐use method. In this paper, an OSA detection model, based on regression approach, using unsegmented electrocardiography (ECG) signals is developed to directly estimate the apnea‐hypopnea index (AHI) value, which is the first report in the literature. In this manner, this work can provide more details of OSA assessment to users and doctors. © 2023 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

This paper introduces the concept of intermittently connected sensor networks where sensors are sleep most of time and become active randomly and rarely. In the networks, packet collision probability and power consumption can be reduced. Meanwhile, the delivery delay increases with the use of the low activation values. In this paper, we design the energy‐efficient intermittently connected sensor networks, considering this trade‐off of activation control. We first provide the algorithm that computes the optimal packet forwarding rule achieving the minimum delivery delay, which can be calculated using the activation rates. We then propose the activation rate control methods, which control the activation rates of the sensors based on the density of the sensors and/or the number of wake‐ups of sensors having relay packets. By doing this, we can improve the delay performance, while suppressing the increase in the packet collision probability and the power consumption of sensors. Through simulation experiments, we demonstrate the effectiveness of our activation control methods in the intermittently connected sensor networks. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Machine learning (ML) has become a rising sophisticated technological application trend in the electrical industry in recent years. Such innovation provides optional methodologies for many existing applications, such as power and load profile forecasting, reliability evaluation, substation behavior detection and state observation of electrical equipment, and so on. This paper presents a review of various supervised and unsupervised ML techniques and applications for electrical power systems, including generation, transmission, distribution and micro‐grid. The algorithms and applications are mainly summarized from IEEE journals and the interest of this paper shows the roles and developments of most used algorithms and its corresponding extensions and performance in different applications. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Accurate assessment of lightning protection performance of extra high voltage transmission lines is important for transmission line design and different lightning protection. Based on the electro‐geometrical model, this paper introduces the angle influence factor, and presents an algorithm for shielding failure trip‐out rate of angle tower, and the existing algorithm is expanded. By establishing the three‐dimensional geometric model of the angle tower, the electrical geometric relations of conductors and ground wires on both sides are analyzed, respectively, and the projection area algorithm for shielding failure is modified. To further verify the application value of the calculation algorithm, the change of the shielding failure trip‐out rate of the typical angle tower with the bending angle of transmission line and the tower height in a 500 kV transmission line is analyzed. The analysis results show that the trip‐out rate of the outside corner is higher than that of the inside one, and with the increase of the angle and the height of the tower, the trip‐out rate shows an upward trend. When the tension tower height is 71.5 m and the angle increases from 0° to 80°, the outside shielding failure trip‐out rate increased by 10.9% and the inside decreased by 9.3%. Compared with the classical electro‐geometrical model calculation, the difference of trip‐out rate is 4.3% when the bending angle is 80°. When the tangent tower height is 70 m and the angle increases from 0° to 40°, the shielding failure trip‐out rate on the outside increased by 5.9% while the inside decreased by 6.2%. The research results provide a simple algorithm for solving bending transmission line and give some reference for lightning protection design of EHV transmission lines. © 2022 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

In order to construct an efficient and reliable global path for unmanned surface vehicles (USVs), this paper proposes a USV global path planning algorithm based on an optimized ant colony algorithm (OACA). The algorithm constructs a USV global path planning model by comprehensively considering energy consumption costs and turning control costs. In order to ensure the adaptability of the model to the task environment, the USV's motion characteristics are analyzed with full consideration of external interference, and on this basis, the characterization of energy consumption costs and turning control costs is completed. In order to obtain the global optimal solution of the model and accelerate the convergence speed of the model, in the initialization process of the ant colony algorithm, the initial pheromone is distributed unevenly by introducing the distance relationship among the intermediate node, the starting point, and ending point to improve the initial search efficiency. In the iterative process of searching for the optimal solution, enhancing the guidance effect of the current optimal solution on the offspring ants by introducing a weight factor to improve the update rule of pheromone, which accelerates the convergence speed of the algorithm. In the last two steps of the deadlock path, the number of lost ants is reduced by introducing a penalty factor to punish the pheromone which can guarantee the diversity of ants, and the algorithm's premature convergence is overcome. The simulation results prove the effectiveness of this algorithm. © 2022 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

The construction direction of Japanese teaching evaluation system based on hybrid teaching mode is to give full feedback to teaching process, diversify evaluation subjects and evaluation methods, and obtain comprehensive and objective evaluation results. Compared with most similar studies, more EEG data of teachers' emotional stress relief and healthy people in Japanese teaching process were collected, and a large number of features were extracted. An experiment of teachers' emotional stress relief recognition in Japanese teaching process based on EEG signal was designed. The feature selection algorithm was used to screen the EEG feature combinations of teachers' emotional stress relief and healthy subjects, and the classification experiment was carried out to verify the difference. Finally, this paper uses the feature selection algorithm of tree model and the random forest model classifier to establish the recognition model of teachers' emotional stress discharge in Japanese teaching process based on EEG signals and achieves the effect of more accurate recognition of teachers' emotional stress discharge in Japanese teaching process. First, the connotation, value, and influencing factors of teachers' emotion management ability are logically integrated and systematically expounded. Second, based on emotional psychology, emotional intelligence theory, psychotherapy theory, and management theory, teachers' emotional management ability is constructed according to the three-dimensional structure theory of intelligence and information processing theory. It is constructed from three dimensions: object dimension (teachers themselves, students, and students), content dimension (positive and negative emotions), and operational dimension (emotional perception, emotional understanding, emotional expression, and emotional regulation). [ABSTRACT FROM AUTHOR]

In view of the poor performance of the traditional adaptive filtering algorithm in identifying sparse systems under impulse noise, an affine projection maximum correntropy criterion with compound inverse proportional function (APMCCCIPF) algorithm is proposed in this paper, and the compound inverse proportional function approaching l0 norm is introduced into the traditional affine projection maximum correntropy criterion (APMCC) algorithm. The fixed step‐size APMCCCIPF algorithm cannot obtain faster convergence speed and lower steady‐state error at the same time, and the most effective method to solve this contradiction is to change the fixed step‐size in the algorithm to a variable step‐size. Further, a variable step‐size factor is constructed in the APMCCCIPF algorithm, and a novel variable step‐size APMCCCIPF algorithm is proposed. A modified Gaussian function, which can resist impulse noise interference, is applied to adjust the step‐size change. Besides, the convergence and complexity of the proposed algorithms are analyzed. In the simulation of sparse system identification and echo cancellation under impulsive noise, the proposed algorithms not only achieve a lower and faster convergence rate, but also obtain a lower steady‐state error. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

This paper presents a parameter estimation based method to diagnose winding deformation and turn‐to‐turn fault of power transformers. First, an estimation model of transformer parameters is built, in which five equations are taken in account including voltage loop equation, active loss equation, input impedance equation, no‐load current equation and no‐load loss equation. Then, particle swarm optimization (PSO) is used to solve the model, and the characteristics of estimation data under winding faults are analyzed. At last, based on the estimation data, random forest (RF) algorithm is employed to classify transformer states and realize fault diagnostic. The simulation results show that the proposed parameter estimation method has high precision and are not affected by the factors including load power factors and the type and degree of winding deformation, and the impact of load rates can be avoided; the fault diagnostic scheme based on RF is quite sensitive and effective. The proposed method eliminates the need of transformer outage, and compared with other methods based on parameter estimation, it can distinguish winding deformation and turn‐to‐turn fault. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Missing data is a prevailing problem in predictive analytics. In this paper, a winner‐take‐all (WTA) autoencoder‐based piecewise linear model is developed to solve the nonlinear regression problem under the missing value scenario, which consists of two parts: an overcomplete WTA autoencoder and a gated linear network. The overcomplete WTA autoencoder is a stacked denoising autoencoder (SDAE) designed to play two roles: (1) to estimate the missing values; (2) to realize a sophisticated partitioning by generating a broad set of binary gate control sequences. Besides, an iterative algorithm with renewed teacher signals is developed to train the SDAE. On the other hand, the gated linear network with the generated binary gate control sequences implements a flexible piecewise linear model for nonlinear regression. By composing a quasi‐linear kernel based on the gate control sequences, the piecewise linear model is then identified in the same way as a support vector regression. Experimental results have shown that our proposed hybrid model has a better performance than traditional models. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

A new image dehazing algorithm based on adaptive sky region is proposed in this paper, which shows good fidelity in sky region and satisfying visual effect in non‐sky region. For robust sky segmentation, we propose a rough‐to‐fine method that can make a balance between efficiency and accuracy. Considering distribution of haze is inconsistent, we divide the input image into three parts and calculate their atmospheric lights respectively. To solve the problem of invalid dark channel prior, we make an improvement for the transmission estimation. Finally, image fusion is taken as a post processing that can solve the problem of partial darkness and ensure a visual pleasing result. The experimental results for both synthetic and natural hazy images demonstrate that our algorithm performs comparable or even better results than the state‐of‐the‐art methods in terms of various measurement indexes, such as the PSNR, SSIM, and so forth. Besides, the proposed algorithm can be also applied in FPGA platform due to the optimized performance. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

In this paper, a new method is proposed to identify the parameters of roll motion equation using the response data of ship in regular waves. The proposed method is based on the fact that if the estimated parameters are close to the true parameters, then, its response are also close to the true response. Therefore, the parameter identification is achieved via minimizing the mean square error between the true response and the estimated response. To effectively solving the parameter minimization problem, an improved imperialist competition algorithm (ICA), called opposition based learning Gaussian bare bone imperialist competition algorithm (OBL‐GBBICA) is proposed. The proposed OBL‐GBBICA integrates the opposition learning and Gaussian sampling technique into ICA to enhance its exploration ability and speed up its convergence. Experimental results show that the proposed method can accurately identify the parameters of roll motion equation. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

In this paper, we propose a location-dependent earthquake prediction based on recurrent neural network algorithms. The location-dependent prediction consists of clustering the seismic dataset based on its geographical parameters (longitude and latitude) using the K-Means algorithm. In addition, we divide each cluster into two specific subsets. The first set consists of events with an average magnitude between 2 and 5, and the second set contains seismic events with magnitudes >5. Clustering allows our models to focus on each region independently. Associated with splitting methods, it helps them to learn the specific trends of each cluster with accurate performance. Moreover, in our work, the large earthquakes with few events are trained independently and remain unaffected by the other dominant events. We implement our models using the powerful recurrent neural network algorithms: Long Short Memory (LSTM), Gated Recurrent Network (GRU), and their hybrid model (LSTM-GRU). They are tested using data related to three different regions: Morocco, Japan, and Turkey. We evaluate the performance according to three metrics: mean absolute error, mean squared error, and root-mean-square error. Compared to other works in the literature, our models generally perform well, especially in predicting large earthquakes. - A location-dependent prediction using a geographic clustering by K-means algorithm. - Earthquake prediction using recurrent neural network algorithms: LSTM and GRU. - Three different seismic regions are studied: Japan, Turkey, and Morocco. - Discussion and comparison of results. [ABSTRACT FROM AUTHOR]