Search

Simple Summary: Dragonflies and damselflies are invaluable components of freshwater ecosystems, acting as dominant predators and facilitating the exportation of matter and energy from aquatic to terrestrial environments thanks to their powerful flight. They are also crucial as a food source for various animals and, in some cases, for humans. Through a comprehensive review of the literature, we estimated the biomass, density, and secondary production of these insects, assessing their potential significance in terrestrial fertilization. Our findings indicate that dragonfly larvae are particularly abundant in lentic habitats. Overall, the evidence suggests that dragonflies and damselflies may make a substantial contribution to the exportation of materials to terrestrial systems, especially considering the adults' ability to migrate and inhabit different types of water ecosystems. Freshwater insects are highly significant as ecosystem service providers, contributing to provisioning services, supporting services, and cultural services. Odonates are dominant predators in many freshwater systems, becoming top predators in fishless ecosystems. One service that odonates provide is the export of matter and energy from aquatic to terrestrial ecosystems. In this study, we provide a review of the literature aiming to estimate the density, biomass, and secondary production of odonates and discuss to what extent this order of insects is relevant for the fertilization of terrestrial ecosystems. We found published data on 109 species belonging to 17 families of odonates from 44 papers. Odonata larvae are abundant in freshwater systems, with a mean density of 240.04 ± 48.01 individuals m−2 (±SE). Lentic habitats show much higher densities (104.40 ± 55.31 individuals m−2, N = 118) than lotic systems (27.12 ± 5.09, N = 70). The biomass estimations for odonates indicate values of 488.56 ± 134.51 mg m−2 y−1, with similar values in lentic and lotic habitats, which correspond to annual secondary productions of 3558.02 ± 2146.80 mg m−2 y−1. The highest biomass is found in dragonflies of the Aeshnidae, Corduliidae, and Gomphidae families. The available evidence suggests a significant potential contribution of Odonata to the exportation of material from water bodies to land. This is further strengthened by the ability of adult odonates to migrate and to colonize different types of water bodies. [ABSTRACT FROM AUTHOR]

Forest biomass estimation is undoubtedly one of the most pressing research subjects at present. Combining multi-source remote sensing information can give full play to the advantages of different remote sensing technologies, providing more comprehensive and rich information for aboveground biomass (AGB) estimation research. Based on Landsat 8, Sentinel-2A, and ALOS2 PALSAR data, this paper takes the artificial coniferous forests in the Saihanba Forest of Hebei Province as the object of study, fully explores and establishes remote sensing factors and information related to forest structure, gives full play to the advantages of spectral signals in detecting the horizontal structure and multi-dimensional synthetic aperture radar (SAR) data in detecting the vertical structure, and combines environmental factors to carry out multivariate synergistic methods of estimating the AGB. This paper uses three variable selection methods (Pearson correlation coefficient, random forest significance, and the least absolute shrinkage and selection operator (LASSO)) to establish the variable sets, combining them with three typical non-parametric models to estimate AGB, namely, random forest (RF), support vector regression (SVR), and artificial neural network (ANN), to analyze the effect of forest structure on biomass estimation, explore the suitable AGB of artificial coniferous forests estimation of machine learning models, and develop the method of quantifying saturation value of the combined variables. The results show that the horizontal structure is more capable of explaining the AGB compared to the vertical structure information, and that combining the multi-structure information can improve the model results and the saturation value to a great extent. In this study, different sets of variables can produce relatively superior results in different models. The variable set selected using LASSO gives the best results in the SVR model, with an R 2 values of 0.9998 and 0.8792 for the training and the test set, respectively, and the highest saturation value obtained is 185.73 t/ha, which is beyond the range of the measured data. The problem of saturation in biomass estimation in boreal medium- and high-density forests was overcome to a certain extent, and the AGB of the Saihanba area was better estimated. [ABSTRACT FROM AUTHOR]

Shrimp fry counting is an important task for biomass estimation in aquaculture. Accurate counting of the number of shrimp fry in tanks can not only assess the production of mature shrimp but also assess the density of shrimp fry in the tanks, which is very helpful for the subsequent growth status, transportation management, and yield assessment. However, traditional manual counting methods are often inefficient and prone to counting errors; a more efficient and accurate method for shrimp fry counting is urgently needed. In this paper, we first collected and labeled the images of shrimp fry in breeding tanks according to the constructed experimental environment and generated corresponding density maps using the Gaussian kernel function. Then, we proposed a multi-scale attention fusion-based shrimp fry counting network called the SFCNet. Experiments showed that our proposed SFCNet model reached the optimal performance in terms of shrimp fry counting compared to CNN-based baseline counting models, with MAEs and RMSEs of 3.96 and 4.682, respectively. This approach was able to effectively calculate the number of shrimp fry and provided a better solution for accurately calculating the number of shrimp fry. [ABSTRACT FROM AUTHOR]

In various studies trees have been extracted and their conditions have been examined through different detection algorithms from two main data sources including (a) point cloud and (b) raster data. The output of tree extraction is the input of the next processing steps, and the importance of these outputs is proved more than before. Tree Extraction (TE) has many applications in biomass estimation, CHM extraction, etc. All of which require high accuracy and the correct position of the trees. therefore, in this study, a comparison between tree extraction algorithms in two common sources of data has been conducted. As for the raster data, all bands are first co-registered. Afterward, the trees are separated from the background by using image processing techniques such as changing the image color space and weighted averaging on different bands. Finally, TE algorithms such as watershed segmentation, valley following, local maxima, and image binarization were applied. As for the point cloud data, TE can be conducted in the object space to compensate for the methods used in the raster space with object detection algorithms e.g., the coherence between the two trees, etc. which have been discussed in detail in this paper. In the object space, three algorithms, region-based, surface normal, and Euclidean segmentation, were implemented and discussed on the same raster data set in the photogrammetric point cloud. The results show the higher accuracy of the region-based algorithm in object-space by more than 26% in comparison with the valley following algorithm in image space. [ABSTRACT FROM AUTHOR]

Accurate estimating of above-ground biomass (AGB) of vegetation in urbanized areas is essential for urban ecosystem services. NASA's Global Ecosystem Dynamics Investigation (GEDI) mission can obtain precise terrestrial vegetation structure, which is very useful for AGB estimation in large forested areas. However, the spatial heterogeneity and sparse distribution of vegetation in urban areas lead to great uncertainty in AGB estimation. This study proposes a method for estimating vegetation heights by fusing GEDI laser observations with features extracted from optical images. GEDI is utilized to extract the accurate vegetation canopy height, and the optical images are used to compensate for the spatial incoherence of GEDI. The correlation between the discrete vegetation heights of GEDI observations and image features is constructed using Random Forest (RF) to obtain the vegetation canopy heights in all vegetated areas, thus estimating the AGB. The results in Xuzhou of China using GEDI observations and image features from Sentinel-2 and Landsat-8 satellites indicate that: (1) The method of combining GEDI laser observation data with optical images is effective in estimating AGB, and its estimation accuracy (R2 = 0.58) is higher than that of using only optical images (R2 = 0.45). (2) The total AGB in the shorter vegetation region is higher than the other two in the broadleaf forest and the coniferous forest, but the AGB per unit area is the lowest in the shorter vegetation area at 33.60 Mg/ha, and it is the highest in the coniferous forest at 46.60 Mg/ha. And the highest average AGB occurs in October–December at 59.55 Mg/ha in Xuzhou. (3) The near-infrared band has a greater influence on inverted AGB, followed by textural features. Although more precise information about vegetation should be considered, this paper provides a new method for the AGB estimation and also a way for the evaluation and utilization of urban vegetation space. [ABSTRACT FROM AUTHOR]

The accurate estimation of forest aboveground biomass is of great significance for forest management and carbon balance monitoring. Remote sensing instruments have been widely applied in forest parameters inversion with wide coverage and high spatiotemporal resolution. In this paper, the capability of different remote-sensed imagery was investigated, including multispectral images (GaoFen-6, Sentinel-2 and Landsat-8) and various SAR (Synthetic Aperture Radar) data (GaoFen-3, Sentinel-1, ALOS-2), in aboveground forest biomass estimation. In particular, based on the forest inventory data of Hangzhou in China, the Random Forest (RF), Convolutional Neural Network (CNN) and Convolutional Neural Networks Long Short-Term Memory Networks (CNN-LSTM) algorithms were deployed to construct the forest biomass estimation models, respectively. The estimate accuracies were evaluated under the different configurations of images and methods. The results show that for the SAR data, ALOS-2 has a higher biomass estimation accuracy than the GaoFen-3 and Sentinel-1. Moreover, the GaoFen-6 data is slightly worse than Sentinel-2 and Landsat-8 optical data in biomass estimation. In contrast with the single source, integrating multisource data can effectively enhance accuracy, with improvements ranging from 5% to 10%. The CNN-LSTM generally performs better than CNN and RF, regardless of the data used. The combination of CNN-LSTM and multisource data provided the best results in this case and can achieve the maximum R2 value of up to 0.74. It was found that the majority of the biomass values in the study area in 2018 ranged from 60 to 90 Mg/ha, with an average value of 64.20 Mg/ha. [ABSTRACT FROM AUTHOR]

The accurate measurement of diameter at breast height (DBH) is one of the essential tasks for biomass estimation at an individual tree scale. This paper aims to explore the potential of unmanned aerial vehicle (UAV) based light detection and ranging (LiDAR) for trunk point extraction and direct DBH measurement. First, the trunk point cloud for each tree is extracted based on UAV LiDAR data by the multiscale cylindrical detection method. Then, the DBH is directly measured from the point cloud via the multiscale ring fitting. Lastly, we analyze the influence of scanning angle and mode on trunk point extraction and DBH measurement. The results show that the proposed method can obtain high accuracy of trunk point extraction and DBH measurement with real (R2 = 0.708) and simulated (R2 = 0.882) UAV LiDAR data. It proves that the UAV LiDAR data is feasible to directly measure the DBH. The highest accuracy was obtained with the scanning angles ranging from 50 to 65 degrees. Additionally, as the number of routes increases, the accuracy increases. This paper demonstrates that the UAV LiDAR can be used to directly measure the DBH, providing the scientific guidance for UAV path planning and LiDAR scanning design. [ABSTRACT FROM AUTHOR]

In the last two decades, Light detection and ranging (LiDAR) has been widely employed in forestry applications. Individual tree segmentation is essential to forest management because it is a prerequisite to tree reconstruction and biomass estimation. This paper introduces a general framework to extract individual trees from the LiDAR point cloud based on a graph link prediction problem. First, an undirected graph is generated from the point cloud based on K-nearest neighbors (KNN). Then, this graph is used to train a convolutional autoencoder that extracts the node embeddings to reconstruct the graph. Finally, the individual trees are defined by the separate sets of connected nodes of the reconstructed graph. A key advantage of the proposed method is that no further knowledge about tree or forest structure is required. Seven sample plots from a plantation forest with poplar and dawn redwood species have been employed in the experiments. Though the precision of the experimental results is up to 95 % for poplar species and 92 % for dawn redwood trees, the method still requires more investigations on natural forest types with mixed tree species. [ABSTRACT FROM AUTHOR]

Forest aboveground biomass (AGB) retrieval using synthetic aperture radar (SAR) backscatter has received extensive attention. The water cloud model (WCM), because of its simplicity and physical significance, has been one of the most commonly used models for estimating forest AGB using SAR backscatter. Nevertheless, forest AGB estimation using the WCM is usually based on simplified assumptions and empirical fitting, leading to results that tend to overestimate or underestimate. Moreover, the physical connection between the model and the polarimetric synthetic aperture radar (PolSAR) is not established, which leads to the limitation of the inversion scale. In this paper, based on the fully polarimetric SAR data from the Advanced Land Observing Satellite-2 (ALOS-2) Phased Array-type L-band Synthetic Aperture Radar (PALSAR-2), the relative contributions of the three major scattering mechanisms were first analyzed in a hilly area of southern China. On this basis, the traditional WCM was extended by considering the secondary scattering mechanism. Then, to establish the direct relationship between the vegetation scattering mechanism and forest AGB, a new relationship equation between the PolSAR decomposition model and the improved water cloud model (I-WCM) was constructed without the help of external data. Finally, a nonlinear iterative method was used to estimate the forest AGB. The results show that volume scattering is the dominant mechanism, accounting for more than 60%. Double-bounce scattering accounts for the smallest fraction, but still about 10%, which means that the contribution of the double-bounce scattering component is not negligible in forested areas because of the strong penetration capability of the long-wave SAR. The modified method provides a correlation coefficient R2 of 0.665 and a root mean square error (RMSE) of 21.902, which is an improvement of 36.42% compared to the traditional fitting method. Moreover, it enables the extraction of forest parameters at the pix scale using PolSAR data without the need for low-resolution external data and is thus helpful for high-resolution mapping of forest AGB. [ABSTRACT FROM AUTHOR]

Accurate estimation of the maize leaf area index (LAI) and biomass is of great importance in guiding field management and early yield estimation. Physical models and traditional machine learning methods are commonly used for LAI and biomass estimation. However, these models and methods mostly rely on handcrafted features and theoretical formulas under idealized assumptions, which limits their accuracy. Deep neural networks have demonstrated great superiority in automatic feature extraction and complicated nonlinear approximation, but their application to LAI and biomass estimation has been hindered by the shortage of in situ data. Therefore, bridging the gap of data shortage and making it possible to leverage deep neural networks to estimate maize LAI and biomass is of great significance. Optical data cannot provide information in the lower canopy due to the limited penetrability, but synthetic aperture radar (SAR) data can do this, so the integration of optical and SAR data is necessary. In this paper, 158 samples from the jointing, trumpet, flowering, and filling stages of maize were collected for investigation. First, we propose an improved version of the mixup training method, which is termed mixup+, to augment the sample amount. We then constructed a novel gated Siamese deep neural network (GSDNN) based on a gating mechanism and a Siamese architecture to integrate optical and SAR data for the estimation of the LAI and biomass. We compared the accuracy of the GSDNN with those of other machine learning methods, i.e., multiple linear regression (MLR), support vector regression (SVR), random forest regression (RFR), and a multilayer perceptron (MLP). The experimental results show that without the use of mixup + , the GSDNN achieved a similar accuracy to that of the simple neural network MLP in terms of R 2 and RMSE, and this was slightly lower than those of MLR, SVR, and RFR. However, with the help of mixup + , the GSDNN achieved state-of-the-art performance ( R 2 = 0.71, 0.78, and 0.86 and RMSE = 0.58, 871.83, and 150.76 g/m 2 , for LAI, Biomass_wet, and Biomass_dry, respectively), exceeding the accuracies of MLR, SVR, RFR, and MLP. In addition, through the integration of optical and SAR data, the GSDNN achieved better accuracy in LAI and biomass estimation than when optical or SAR data alone were used. We found that the most appropriate amount of synthetic data from mixup + was five times the amount of original data. Overall, this study demonstrates that the GSDNN + mixup + has great potential for the integration of optical and SAR data with the aim of improving the estimation accuracy of the maize LAI and biomass with limited in situ data. [ABSTRACT FROM AUTHOR]

The increasing level of atmospheric carbon dioxide and its effects on our climate system has become a global environment issue. The forest ecosystem is essential for the stability of carbon in the atmosphere as it operates as a carbon sink and provides a habitat for numerous species. Therefore, our understanding of the structural elements of the forest ecosystem is vital for the estimation of forest biomass or terrestrial carbon stocks. Over the last two decades, light detection and ranging (LIDAR) technology has significantly revolutionized our understanding of forest structures and enhanced our ability to monitor forest biomass. This paper presents a review of metrics for forest biomass estimation, outlines metrics selection methods for biomass modeling, and addresses various assessment criteria for the selection of allometric equations for the aboveground forest biomass estimations, using LIDAR data. After examining one hundred publications written by different authors between 1999 and 2023, it was observed that LIDAR technology has become a dominant data collection tool for aboveground biomass estimation with most studies focusing on the use of airborne LIDAR data for the plot-level analysis on a local scale. Parametric-based models dominated in most studies with coefficient of determination (R2) and root mean square error (RMSE) as assessment criteria. In addition, mean top canopy height (MCH) and quadratic mean height (QMH) were reported as strong predictors for aboveground biomass (AGB) estimation. Pixel-based uncertainty analysis was found to be a reliable method for assessing spatial variations in uncertainties. [ABSTRACT FROM AUTHOR]

The traditional classical sampling statistics method ignores the spatial location relationship of survey samples, which leads to many problems. This study aimed to propose a spatial sampling method for sampling estimation and optimization of forest biomass, achieving a more efficient and effective monitoring system. In this paper, we used Sequential Gaussian Conditional Simulation (SGCS) to obtain the biomass of four typical forest types in Shangri-La, Yunnan Province, China. In addition, we adopted a geostatistical sampling method for sample point layout and optimization to achieve the purpose of improving sampling efficiency and accuracy, and compared with the traditional sampling method. The main results showed that (1) the Gaussian model, exponential model, and spherical model were used to analyze the variogram of the four typical forests biomass, among which the exponential model had the best fitting effect (R2 = 0.571, RSS = 0.019). The range of the exponential model was 8700 m, and the nugget coefficient (C0/(C0 + C)) was 11.67%, which showed that the exponential model could be used to analyze the variogram of forest biomass. (2) The coefficient of variation (CV) based on 323 biomass field plots was 0.706, and the CV based on SGCS was 0.366. In addition, the Overall Estimate Consistency (OEC) of the simulation result was 0.871, which can be used for comparative analysis of traditional and spatial sampling. (3) Based on the result of SGCS, with 95% reliability, the sample size of traditional equidistant sampling (ES) was 191, and the sampling accuracy was 95.16%. But, the spatial sampling method based on the variation scale needed 92 samples, and the sampling accuracy was 93.12%. On the premise of satisfying sampling accuracy, spatial sampling efficiency was better than traditional ES. (4) The accuracy of stratified sampling (SS) of four typical forest areas based on 191 samples was 97.46%. However, the sampling accuracy of the biomass variance stratified space based on the SGCS was 93.89%, and the sample size was 52. Under the premise of satisfying the sampling accuracy, the sampling efficiency was obviously better than the traditional SS. Therefore, we can obtain the conclusion that the spatial sampling method is superior to the traditional sampling method, as it can reduce sampling costs and solve the problem of sample redundancy in traditional sampling, improving the sampling efficiency and accuracy, which can be used for sampling estimation of forest biomass. [ABSTRACT FROM AUTHOR]

As one of the three fastest-growing tree species in the world, eucalyptus grows rapidly, with a monthly growth rate of up to 1 m and a maximum annual growth rate of up to 10 m. Therefore, ways to accurately and quickly obtain the aboveground biomass (AGB) of eucalyptus in different growth stages at a low cost are the foundation of achieving eucalyptus growth-change monitoring and precise management. Although Light Detection and Ranging (LiDAR) can achieve high-accuracy estimations of individual eucalyptus tree biomasses, the cost of data acquisition is relatively high. While the AGB estimation accuracy of high-resolution images may be affected by a lack of forest vertical structural information, stereo images obtained using unmanned aerial vehicles (UAVs) can not only provide horizontal structural information but also vertical structural information through derived point data, demonstrating strong application potential in estimating the biomass of eucalyptus plantations. To explore the potential of UAV stereo images for estimating the AGB of individual eucalyptus trees and further investigate the impact of stereo-image-derived features on the construction of biomass models, in this study, UAVs equipped with consumer-grade cameras were used to obtain multitemporal stereo images. Different features, such as spectral features, texture, tree height, and crown area, were extracted to estimate the AGB of individual eucalyptus trees of five different ages with three algorithms. The different features extracted based on the UAV images had different effects on estimating AGB in individual eucalyptus trees. By estimating eucalyptus AGB using only spectrum features, we found that tree height had the greatest impact, with its R2 value increasing by 0.28, followed by forest age. Other features, such as spectrum, texture, and crown area, had relatively small effects. For the three algorithms, the estimation accuracy of the CatBoost algorithm was the highest, with an R2 ranging from 0.65 to 0.90, and the normalized root-mean-square error (NRMSE) ranged from 0.08 to 0.15. This was followed by the random forest algorithm. The ridge regression algorithm had the lowest accuracy, with an R2 ranging from 0.34 to 0.82 and an NRMSE value ranging from 0.11 to 0.21. The AGB model that we established with forest age, TH, crown area, and HOM-B feature variables using the CatBoost algorithm had the best estimation accuracy, with an R2 of 0.90 and an NRMSE of 0.08. The results indicated that accurately estimating the AGB of individual eucalyptus trees can be achieved based on stereo images obtained using UAVs equipped with affordable, consumer-grade cameras. This paper can provide methodological references and technical support for estimating forest biomass, carbon storage, and other structural parameters based on UAV images. [ABSTRACT FROM AUTHOR]

Rapid estimation of above-ground biomass (AGB) with high accuracy is essential for monitoring crop growth status and predicting crop yield. Recently, remote sensing techniques using unmanned aerial systems (UASs) have exhibited great potential in obtaining structural information about crops and identifying spatial heterogeneity. However, methods of data fusion of different factors still need to be explored in order to enhance the accuracy of their estimates. Therefore, the objective of this study was to investigate the combined metrics of different variables (spectral, structural and meteorological factors) for AGB estimation of wheat using UAS multispectral data. UAS images were captured on two selected growing dates at a typical reclaimed cropland in the North China Plain. The spectral response was determined using the highly correlated vegetation index (VI). A structural metric, the canopy height model (CHM), was produced using UAS-based multispectral images. The measure of growing degree days (GDD) was selected as a meteorological proxy. Subsequently, a structurally–meteorologically weighted canopy spectral response metric (SM-CSRM) was derived by the pixel-level fusion of CHM, GDD and VI. Both correlation coefficient analysis and simple function fitting were implemented to explore the highest correlation between the measured AGB and each proposed metric. The optimal regression model was built for AGB prediction using leave-one-out cross-validation. The results showed that the proposed SM-CSRM generally improved the correlation between wheat AGB and various VIs and can be used for estimating the wheat AGB. Specifically, the combination of MERIS terrestrial chlorophyll index (MTCI), vegetation-masked CHM (mCHM) and normalized GDD (nGDD) achieved an optimal accuracy (R2 = 0.8069, RMSE = 0.1667 kg/m2, nRMSE = 19.62%) through the polynomial regression method. This improved the nRMSE by 3.44% compared to the predictor using MTCI × mCHM. Moreover, the pixel-level fusion method slightly enhanced the nRMSE by ~0.3% for predicted accuracy compared to the feature-level fusion method. In conclusion, this paper demonstrated that an SM-CSRM using pixel-level fusion with canopy spectral, structural and meteorological factors can obtain a good level of accuracy for wheat biomass prediction. This finding could benefit the assessment of reclaimed cropland or the monitoring of crop growth and field management in precision agriculture. [ABSTRACT FROM AUTHOR]

Large‐scale ecological sampling networks, such as national forest inventories (NFIs), collect in situ data to support biodiversity monitoring, forest management and planning, and greenhouse gas reporting. Data harmonization aims to link auxiliary remotely sensed data to field‐collected data to expand beyond field sampling plots, but outliers that arise in data harmonization—questionable observations because their values differ substantially from the rest—are rarely addressed.In this paper, we review the sources of commonly occurring outliers, including random chance (statistical outliers), definitions and protocols set by sampling networks, and temporal and spatial mismatch between field‐collected and remotely sensed data. We illustrate different types of outliers and the effects they have on estimates of above‐ground biomass population parameters using a case study of 292 NFI plots paired with airborne laser scanning (ALS) and Sentinel‐2 data from Sawyer County, Wisconsin, United States.Depending on the criteria used to identify outliers (sampling year, plot location error, nonresponse, presence of zeros and model residuals), as many as 53 of the 292 Forest Inventory and Analysis plot observations (18%) were identified as potential outliers using a single criterion and 111 plot observations (38%) if all criteria were used. Inclusion or removal of potential outliers led to substantial differences in estimates of mean and standard error of the estimate of biomass per unit area. The simple expansion estimator, which does not rely on ALS or other auxiliary data, was more sensitive to outliers than model‐assisted approaches that incorporated ALS and Sentinel‐2 data. Including Sentinel‐2 predictors showed minimal increases to the precision of our estimates relative to models with ALS predictors alone.Outliers arise from many causes and can be pervasive in data harmonization workflows. Our review and case study serve as a note of caution to researchers and practitioners that the inclusion or removal of potential outliers can have unintended consequences on population parameter estimates. When used to inform large‐scale biomass mapping, carbon markets, greenhouse gas reporting and environmental policy, it is necessary to ensure the proper use of NFI and remotely sensed data in geospatial data harmonization. [ABSTRACT FROM AUTHOR]

Accurately estimating forest biomass based on spaceborne lidar on a county scale is challenging due to the incomplete coverage of spaceborne lidar data. Therefore, this research aims to interpolate GEDI spots and explore the feasibility of approaches to improving Quercus forest biomass estimation accuracy in the alpine mountains of Yunnan Province, China. This paper uses GEDI data as the main information source and a typical mountainous area in Shangri-La, northwestern Yunnan Province, China, as the study area. Based on the pre-processing of light spots. A total of 38 parameters were extracted from the canopy and vertical profiles of 1307 light spots in the study area, and the polygon data of the whole study area were obtained from the light spot data through Kriging interpolation. Multiple linear regression, support vector regression, and random forest were used to establish biomass models. The results showed that the optimal model is selected using the semi-variance function for the Kriging interpolation of each parameter of GEDI spot, the optimal model of modis_nonvegetated is a linear model, and the optimal model for rv, sensitivity, and modis_treecover is the exponential model. Analysis of the correlation between 39 parameters extracted from GEDI L2B and three topographic factors with oak biomass showed that sensitivity had a highly significant positive correlation (p < 0.01) with Quercus biomass, followed by a significant negative correlation (p < 0.05) with aspect and modis_nonvegation. After variable selection, the estimation model of Quercus biomass established using random forest had R2 = 0.91, RMSE = 19.76 t/hm2, and the estimation accuracy was better than that of multiple linear regression and support vector regression. The estimated total biomass of Quercus in the study area was mainly distributed between 26.48 and 257.63 t/hm2, with an average value of 114.33 t/hm2 and a total biomass of about 1.26 × 107 t/hm2. This study obtained spatial consecutive information using Kriging interpolation. It provided a new research direction for estimating other forest structural parameters using GEDI data. [ABSTRACT FROM AUTHOR]

Grasslands are one of the world's largest ecosystems, accounting for 30% of total terrestrial biomass. Considering that aboveground biomass (AGB) is one of the most essential ecosystem services in grasslands, an accurate and faster method for estimating AGB is critical for managing, protecting, and promoting ecosystem sustainability. Unmanned aerial vehicles (UAVs) have emerged as a useful and practical tool for achieving this goal. Here, we review recent research studies that employ UAVs to estimate AGB in grassland ecosystems. We summarize different methods to establish a comprehensive workflow, from data collection in the field to data processing. For this purpose, 64 research articles were reviewed, focusing on several features including study site, grassland species composition, UAV platforms, flight parameters, sensors, field measurement, biomass indices, data processing, and analysis methods. The results demonstrate that there has been an increase in scientific research evaluating the use of UAVs in AGB estimation in grasslands during the period 2018–2022. Most of the studies were carried out in three countries (Germany, China, and USA), which indicates an urgent need for research in other locations where grassland ecosystems are abundant. We found RGB imaging was the most commonly used and is the most suitable for estimating AGB in grasslands at the moment, in terms of cost–benefit and data processing simplicity. In 50% of the studies, at least one vegetation index was used to estimate AGB; the Normalized Difference Vegetation Index (NDVI) was the most common. The most popular methods for data analysis were linear regression, partial least squares regression (PLSR), and random forest. Studies that used spectral and structural data showed that models incorporating both data types outperformed models utilizing only one. We also observed that research in this field has been limited both spatially and temporally. For example, only a small number of papers conducted studies over a number of years and in multiple places, suggesting that the protocols are not transferable to other locations and time points. Despite these limitations, and in the light of the rapid advances, we anticipate that UAV methods for AGB estimation in grasslands will continue improving and may become commercialized for farming applications in the near future. [ABSTRACT FROM AUTHOR]

Forest biomass is a foundation for evaluating the contribution to the carbon cycle of forests, and improving biomass estimation accuracy is an urgent problem to be addressed. Terrestrial laser scanning (TLS) enables the accurate restoration of the real 3D structure of forests and provides valuable information about individual trees; therefore, using TLS to accurately estimate aboveground biomass (AGB) has become a vital technical approach. In this study, we developed individual tree AGB estimation models based on TLS-derived parameters, which are not available using traditional methods. The height parameters and crown parameters were extracted from the point cloud data of 1104 trees. Then, a stepwise regression method was used to select variables for developing the models. The results showed that the inclusion of height parameters and crown parameters in the model provided an additional 3.76% improvement in model estimation accuracy compared to a DBH-only model. The optimal linear model included the following variables: diameter at breast height (DBH), minimum contact height (Hcmin), standard deviation of height (Hstd), 1% height percentile (Hp1), crown volume above the minimum contact height (CVhcmin), and crown radius at the minimum contact height (CRhcmin). Comparing the performance of the models on the test set, the ranking is as follows: artificial neural network (ANN) model > random forest (RF) model > linear mixed-effects (LME) model > linear (LN) model. Our results suggest that TLS has substantial potential for enhancing the accuracy of individual-tree AGB estimation and can reduce the workload in the field and greatly improve the efficiency of estimation. In addition, the model developed in this paper is applicable to airborne laser scanning data and provides a novel approach for estimating forest biomass at large scales. [ABSTRACT FROM AUTHOR]

In recent decades, the feasibility of using terrestrial laser scanning (TLS) in forest inventories was investigated as a replacement for time-consuming traditional field measurements. However, the optimal acquisition of point clouds requires the definition of the minimum point density, as well as the sensor positions within the plot. This paper analyzes the effect of (i) the number and distribution of scans, and (ii) the point density on the estimation of seven forest parameters: above-ground biomass, basal area, canopy base height, dominant height, stocking density, quadratic mean diameter, and stand density index. For this purpose, 31 combinations of TLS scan positions, from a single scan in the center of the plot to nine scans, were analyzed in 28 circular plots in a Mediterranean forest. Afterwards, multiple linear regression models using height metrics extracted from the TLS point clouds were generated for each combination. In order to study the influence of terrain slope on the estimation of forest parameters, the analysis was performed by using all the plots and by creating two categories of plots according to their terrain slope (slight or steep). Results indicate that the use of multiple scans improves the estimation of forest parameters compared to using a single one, although using more than three to five scans does not necessarily improves the accuracy. Moreover, it is also shown that lower accuracies are obtained in plots with steep slope. In addition, it was observed that each forest parameter has a strategic distribution depending on the field of view of the TLS. Regarding the point density analysis, the use of 1% to 0.1% (≈136 points·m−2) of the initial point cloud density (≈37,240.86 points·m−2) generates an R2adj difference of less than 0.01. These findings are useful for planning more efficient forest inventories, reducing acquisition and processing time as well as costs. [ABSTRACT FROM AUTHOR]

Bamboo forest is a special forest type, and its aboveground biomass (AGB) is a key indicator of its carbon sequestration capacity and ecosystem productivity. Due to its complex canopy structure and particular growth pattern, the AGBs of individual bamboos that were estimated using traditional remotely sensed data are of relatively low accuracy. In recent years, the point cloud data scanned by terrestrial laser scanners (TLS) offer the possibility for more accurate estimations of bamboo AGB. However, bamboo culms tend to have various bending degrees during the growth process, which causes the AGB estimated on culm height (H) to be generally less than the true value. In this paper, taking one sample plot of the Moso bamboo forest in Hutou Village, Chongqing, China as the study site, we employed a TLS to acquire the point cloud data. The layer-wise distance discrimination method was first developed to accurately segment individual bamboos from the dense stand. Next, the diameter at breast height (DBH) and culm length (L) of an individual bamboo were precisely extracted by fitting the cross-section circle and constructing the longitudinal axis of the bamboo culm, respectively. Lastly, the AGBs of the Moso bamboos in the study site were separately calculated using the allometric equations with the DBH and L as predictor variables. As results, the precision of the complete bamboo segmentation was 90.4%; the absolute error ( A E ) of the extracted DBHs ranged from −1.22 cm to 0.88 cm ( R 2 = 0.93, R M S E = 0.40 cm); the A E of the extracted Hs varied from –0.77 m to 1.02 m ( R 2 = 0.91, R M S E = 0.45 m); and the A E of the extracted Ls varied from −1.08 m to 0.77 m ( R 2 = 0.95, R M S E = 0.23 m). The total estimated AGB of the Moso bamboos in the sample plot increased by 2.85%, from 680.40 kg on H to 696.36 kg on L. These measurements demonstrated the unique benefits of the TLS-acquired point cloud in characterizing the structural parameters of Moso bamboos and estimating their AGBs with high accuracy. [ABSTRACT FROM AUTHOR]

Multi-angle optical reflectance measurements such as those from the NASA moderate resolution imaging spectroradiometer (MODIS) are sensitive to forest 3D structures, potentially serving as a useful proxy to estimate forest structural variables such as aboveground biomass (AGB)—a potential theoretically recognized but rarely explored. In this paper, we examined the effectiveness of the reconstructed MODIS typical-angle reflectances—reflectances observed from the hotspot, darkspot, and nadir directions—for estimating forest AGB from both theoretical and practical perspectives. To gain theoretical insights, we first tested the sensitivities of typical-angle reflectances to forest AGB through simulations using the 4-scale bidirectional reflectance distribution function (BRDF) model. We then built statistical models to fit the relationship between MODIS multi-angle observations and field-measured deciduous-broadleaf/mixed-temperate forest AGB at five sites in the eastern USA, assisted by a semivariogram analysis to determine the effect of pixel heterogeneity on the MODIS–AGB relationship. We also determined the effects of terrain and season on the predictive relationships. Our results indicated that multi-angle reflectances with fewer visible shadows yielded better AGB estimates (hotspot: R2 = 0.63, RMSE = 54.28 Mg/ha; nadir: R2 = 0.55, RMSE = 59.95 Mg/ha; darkspot: R2 = 0.46, RMSE = 65.66 Mg/ha) after filtering out the effects of complex terrain and pixel heterogeneity; the MODIS typical-angle reflectances in the NIR band were the most sensitive to forest AGB. We also found strong sensitivities of estimated accuracies to MODIS image acquisition dates or season. Overall, our results suggest that the current practice of leveraging only single-angle MODIS data can be a suboptimal strategy for AGB estimation. We advocate the use of MODIS multi-angle reflectances for optical remote sensing of forest AGB or potentially other ecological applications requiring forest structure information. [ABSTRACT FROM AUTHOR]

Entomological radar is a specially designed instrument that can measure the behavioral and biological characteristics of high-altitude migrating insects. Its application is of great significance for the monitoring, early warning, and control of agricultural pests. As an important component of the local migratory biomass, insects fly in the air during the day and night. The fully polarimetric entomological radar was carefully designed with all-day, all-weather, and multi-function measurement capabilities. The fully polarimetric entomological radar measures the mass of a single insect based on the radar cross-sectional (RCS) measurement and then calculates the biomass of migrating insects. Therefore, the measurement accuracy of the insect RCS is the key indicator affecting the accuracy of migratory biomass statistics. Due to the radar's lack of in-beam angle measurement ability, the insect RCS is usually measured based on the assumption that the insect is on the beam center. Therefore, the measured RCS will be smaller than true value if the insect deviates from the beam center due to the gain curve of the antenna. This leads to measurement errors in regard to the insect mass and migratory biomass. In order to solve this problem, a biomass estimation method, reported in this paper, was designed under the assumption of a uniform distribution of migrating insects in the radar monitoring airspace. This method can estimate the individual RCS expectation of migrating insects through a statistical method without measuring the position of the insects in the beam and then obtain the migratory biomass. The effectiveness of the model and algorithm is verified by simulations and entomological radar field measurements. [ABSTRACT FROM AUTHOR]

Alfalfa (Medicago sativa L.) is one of the most relevant forage crops due to its importance for livestock. Timely harvesting is critical to secure adequate forage quality. However, farmers face challenges not only to decide the optimal harvesting time but to predict the optimum levels for both forage production and quality. Fortunately, remote sensing technologies can significantly contribute to obtaining production and quality insights, providing scalability, and supporting complex farming decision-making. Therefore, we aim to develop a systematic review of the current scientific literature to identify the current status of research in remote sensing for alfalfa and to evaluate new perspectives for enhancing prediction of both biomass and quality (herein defined as crude protein and fibers) for alfalfa. Twelve papers were included in the database from a total of 198 studies included in the initial screening process. The main findings were (i) more than two-thirds of the studies focused on predicting biomass; (ii) half of the studies used terrestrial platforms, with only 33% using drones and 17% using satellite for remote sensing; (iii) no studies have used satellites assessed alfalfa quality traits; (iv) improved biomass and quality estimations were obtained when remote sensing data was combined with environmental information; (v) due to a direct relationship between biomass and quality, modeling them algorithmically improves the accuracy of estimation as well; (vi) from spectral wavelengths, dry biomass was better estimated in regions near 398, 551, 670, 730, 780, 865, and 1077 nm, wet biomass in regions near 478, 631, 670, 730, 780, 834, 933, 1034, and 1538 nm, and quality traits identified with narrow and very specific wavelengths (e.g., 398, 461, 551, 667, 712, and 1077 nm). Our findings might serve as a foundation to guide further research and the development of handheld sensors for assessing alfalfa biomass and quality. [ABSTRACT FROM AUTHOR]

Biomass is a key biophysical parameter for precision agriculture and plant breeding. Fast, accurate and non-destructive monitoring of biomass enables various applications related to crop growth. In this paper, strawberry dry biomass weight was modeled using 4 canopy geometric parameters (area, average height, volume, standard deviation of height) and 25 spectral variables (5 band original reflectance values and 20 vegetation indices (VIs)) extracted from the Unmanned Aerial Vehicle (UAV) multispectral imagery. Six regression techniques—multiple linear regression (MLR), random forest (RF), support vector machine (SVM), multivariate adaptive regression splines (MARS), eXtreme Gradient Boosting (XGBoost) and artificial neural network (ANN)—were employed and evaluated for biomass prediction. The ANN had the highest accuracy in a five-fold cross-validation, with R2 of 0.89~0.93, RMSE of 7.16~8.98 g and MAE of 5.06~6.29 g. As for the other five models, the addition of VIs increased the R2 from 0.77~0.80 to 0.83~0.86, and reduced the RMSE from 8.89~9.58 to 7.35~8.09 g and the MAE from 6.30~6.70 to 5.25~5.47 g, respectively. Red-edge-related VIs, including the normalized difference red-edge index (NDRE), simple ratio vegetation index red-edge (SRRedEdge), modified simple ratio red-edge (MSRRedEdge) and chlorophyll index red and red-edge (CIred&RE), were the most influential VIs for biomass modeling. In conclusion, the combination of canopy geometric parameters and VIs obtained from the UAV imagery was effective for strawberry dry biomass estimation using machine learning models. [ABSTRACT FROM AUTHOR]

Reliable data on CO2 quantification is increasingly important to quantify the climate benefits of forest landscape restoration and international commitments, such as the Warsaw REDD+ Framework and Nationally Determined Contributions under the Paris Agreement. Calophyllum inophyllum L. (nyamplung as a local name or tamanu tree for the commercial name) is an increasingly popular tree species in forest landscape restoration and bioenergy production for a variety of reasons. In this paper, we present allometric equations for aboveground biomass (AGB), belowground biomass (BGB), and total above- and belowground biomass (TABGB) predictions of C. inophyllum L. Data collection was carried out twice (2017 and 2021) from 40 trees in Java, Indonesia. Allometric equations using the natural logarithm of diameter at breast height (lnDBH) and ln height (lnH) for biomass prediction qualified the model's fit with statistical significance at 95% of the confidence interval for AGB, BGB, and TABGB predictions. The results showed that the linear models using both lnDBH and lnH were well fit and accurate. However, the model with lnDBH is more precise than the model using lnH. Using lnDBH as a predictor, the R2 values were 0.923, 0.945, and 0.932, and MAPE were 24.7, 37.0, and 25.8 for AGB, BGB, and TABGB, respectively. Using lnH as a predictor, the R2 values were 0.887, 0.918, and 0.898 and MAPE were 37.4, 49.0, and 39.8 for AGB, BGB, and TABGB, respectively. Consequently, the driven allometric equations can help accurate biomass quantification for carbon-trading schemes of C. inophyllum L. [ABSTRACT FROM AUTHOR]

Simple Summary: Blue shark species are at the top of the list of captured bycatch sharks in most tuna and tuna-like fisheries. As a consequence, their populations have been declining due to overfishing; thus, there is a need for the assessment of their stocks to better understand blue sharks' stock status. Most bycatch species lack sufficient data for traditional stock assessment models to be implemented. Blue sharks in the South Atlantic have been assessed in the past using a state-space production model. Given the development of new assessment models and the use of up-to-date data, their stock status was evaluated using a new state-space production model (CMSY++). We used different catch time series, abundance indices and priors to measure the intrinsic growth rate r to evaluate their influence on the outputs of CMSY++. We identified from many scenarios that the blue shark stock in the South Atlantic may be witnessing overfishing and is being overfished. CMSY++, an improved version of the CMSY approach developed from Catch-MSY which uses a Bayesian implementation of a modified Schaefer model and can predict stock status and exploitation, was used in the present study. Evaluating relative performance is vital in situations when dealing with fisheries with different catch time series start years and biological prior information. To identify the influences of data inputs on CMSY++ outputs, this paper evaluated the use of a nominal reported catch and a reconstructed catch dataset of the South Atlantic blue shark alongside different priors of the blue shark's productivity/resilience (r) coupled with different indices of abundance. Results from the present study showed that different catch time series start years did not have a significant influence on the estimation of the biomass and fishing reference points reported by CMSY++. However, uninformative priors of r affected the output results of the model. The developed model runs with varying and joint abundance indices showed conflicting results, as classification rates in the final year changed with respect to the type of index used. However, the model runs indicated that South Atlantic blue shark stock could be overfished (B2020/Bmsy = 0.623 to 1.15) and that overfishing could be occurring (F2020/Fmsy = 0.818 to 1.78). This result is consistent with the results from a previous assessment using a state-space surplus production model applied for the same stock in 2015. Though some potential could be observed when using CMSY++, the results from this model ought to be taken with caution. Additionally, the continuous development of prior information useful for this model would help strengthen its performance. [ABSTRACT FROM AUTHOR]

UAV remote sensing inversion is an efficient and accurate method for obtaining information on vegetation coverage, biomass and other parameters. It is widely used on forest, grassland and other terrestrial vegetation. However, it is rarely used on aquatic vegetation, especially in intertidal zones and other complex environments. Additionally, it is mainly used for inversion of coverage, and there have been few studies thus far on biomass assessment. In this paper, we applied multispectral UAV aerial photography data to evaluate the biomass of seaweed in an intertidal zone. During the ebb tide, UAV aerial photography and in situ sampling data were collected in the study area. After optimizing the spectral index and performing a multiple linearity test, the spectral parameters were selected as the input of the evaluation model. Combined with two machine learning algorithms, namely random forest (RF) and gradient boosting decision tree (GBDT), the biomasses of three species of seaweed (Ulva pertusa, Sargassum thunbergii and Sargassum fusiforme) in the intertidal zone were assessed. In addition, the input parameters of the machine learning algorithms were optimized by one-way ANOVA and Pearson's correlation analysis. We propose a method to assess the biomass of intertidal seaweed based on multispectral UAV data combined with statistics and machine learning. The results show that the two machine learning algorithms have different accuracies in terms of biomass evaluation using multispectral images; the gradient boosting decision tree can evaluate the biomass of seaweed in the intertidal zone more accurately. [ABSTRACT FROM AUTHOR]

Forest biomass change monitoring is essential for climate change. Synthetic aperture radar (SAR) and optimal remote sensing (RS) data are two very helpful data sources for forest biomass monitoring and estimation. During the procedure of biomass estimation using RS technique, optimal features selection and estimation models used are two critical steps. This paper therefore focuses on building an operational and robust method of biomass retrieval using optical and SAR RS data. First, random forest (RF) algorithms are used for reducing time-consuming and decreasing computational burden; then, an iterative procedure was embedded in K-nearest neighbor (KNN) algorithms for the best optimal feature selection and combination; last, the best feature combinations and KNN models were applied for forest biomass estimation. Moreover, forest type effects and RS feature source effects were considered. The results showed that feature combination of two optical images and the SAR image showed highest estimation accuracy by using the proposed algorithm (R2 = 0.70 for Forest-1, R2 = 0.72 for Forest-2, and R2 = 0.71 for Forest-3; RMSE = 16.18 Mg/ha for Forest-1, RMSE =17.66 Mg/ha for Forest-2, and RMSE = 18.67 Mg/ha for Forest-3, where Forest-1 is natural pure forests of Yunnan Pines, Forest-2 is natural mixed coniferous forests, and Forest-3 is the combination of Forest-1 and Forest-2). With the comparative analysis of proposed algorithm and different non-parametric algorithms, traditional nonparametric algorithms performed better in Forest-1, but worse in Forest-2 and Forest-3, while the proposed algorithm performed no obvious difference in three forest types and using five feature groups. The results revealed that the proposed algorithm was robust in biomass estimation, with almost no feature source and forest structure dependent for biomass estimation. [ABSTRACT FROM AUTHOR]

The purpose of this work is to present a new method for estimating the parameters of the biomass of agricultural crops based on Earth remote sensing (ERS) data. The method includes mathematical models and algorithms estimation and has been tested on the example of spring wheat sowing. Sowing biomass parameters are the basis for making management decisions aimed at obtaining a given crop yield. Currently, for these purposes, vegetation indices are most widely used. It is impossible to estimate the physical parameters of the crop sowing biomass using these indices, due to their scalar form and lack of dimension. The paper develops a classical approach to the problem of estimating the parameters of the state of agricultural crops, in which remote sensing data are considered as an indirect measurement of the estimated parameters. The basis for the implementation of the estimation method is the dynamic model of biomass parameters and the remote sensing model, which reflects the relationship between the spectral reflection parameters and the estimated parameters of the crop biomass. The parameters of the dynamic model and the remote sensing model are refined by selective ground measurements in separate elementary sections of the field. The difference between this article and previous works of a similar nature lies in the fact that agricultural crops with a more complex morphological structure are considered as the object of evaluation. In addition, such an important feature of agricultural objects as their spatial distribution is considered here. To take it into account, a new type of mathematical models is used, in which spatial coordinates are introduced. Due to the significant complication of modeling and estimation algorithms based on such models, simpler approximation schemes are proposed. The advantage of the proposed approach is that the assessment is considered as a dynamic process that meets the content of the task of monitoring crops. [ABSTRACT FROM AUTHOR]

Crop height and biomass are the two important phenotyping traits to screen forage population types at local and regional scales. This study aims to compare the performances of multispectral and RGB sensors onboard drones for quantitative retrievals of forage crop height and biomass at very high resolution. We acquired the unmanned aerial vehicle (UAV) multispectral images (MSIs) at 1.67 cm spatial resolution and visible data (RGB) at 0.31 cm resolution and measured the forage height and above-ground biomass over the alfalfa (Medicago sativa L.) breeding trials in the Canadian Prairies. (1) For height estimation, the digital surface model (DSM) and digital terrain model (DTM) were extracted from MSI and RGB data, respectively. As the resolution of the DTM is five times less than that of the DSM, we applied an aggregation algorithm to the DSM to constrain the same spatial resolution between DSM and DTM. The difference between DSM and DTM was computed as the canopy height model (CHM), which was at 8.35 cm and 1.55 cm for MSI and RGB data, respectively. (2) For biomass estimation, the normalized difference vegetation index (NDVI) from MSI data and excess green (ExG) index from RGB data were analyzed and regressed in terms of ground measurements, leading to empirical models. The results indicate better performance of MSI for above-ground biomass (AGB) retrievals at 1.67 cm resolution and better performance of RGB data for canopy height retrievals at 1.55 cm. Although the retrieved height was well correlated with the ground measurements, a significant underestimation was observed. Thus, we developed a bias correction function to match the retrieval with the ground measurements. This study provides insight into the optimal selection of sensor for specific targeted vegetation growth traits in a forage crop. [ABSTRACT FROM AUTHOR]

Background: This study explores the use of Unmanned Aerial Vehicles (UAVs) for estimating wheat biomass, focusing on the impact of phenotyping and analytical protocols in the context of late-stage variety selection programs. It emphasizes the importance of variable selection, model specificity, and sampling location within the experimental plot in predicting biomass, aiming to refine UAV-based estimation techniques for enhanced selection accuracy and throughput in variety testing programs. Results: The research uncovered that integrating geometric and spectral traits led to an increase in prediction accuracy, whilst a recursive feature elimination (RFE) based variable selection workflowled to slight reductions in accuracy with the benefit of increased interpretability. Models, tailored to specific experiments were more accurate than those modelling all experiments together, while models trained for broad-growth stages did not significantly increase accuracy. The comparison between a permanent and a precise region of interest (ROI) within the plot showed negligible differences in biomass prediction accuracy, indicating the robustness of the approach across different sampling locations within the plot. Significant differences in the within-season repeatability (w2) of biomass predictions across different experiments highlighted the need for further investigation into the optimal timing of measurement for prediction. Conclusions: The study highlights the promising potential of UAV technology in biomass prediction for wheat at a small plot scale. It suggests that the accuracy of biomass predictions can be significantly improved through optimizing analytical and modelling protocols (i.e., variable selection, algorithm selection, stage-specific model development). Future work should focus on exploring the applicability of these findings under a wider variety of conditions and from a more diverse set of genotypes. [ABSTRACT FROM AUTHOR]

The precise estimation of above-ground biomass (AGB) is imperative for the advancement of breeding programs. Optical variables, such as vegetation indices (VI), have been extensively employed in monitoring AGB. However, the limited robustness of inversion models remains a significant impediment to the widespread application of UAV-based multispectral remote sensing in AGB inversion. In this study, a novel stem–leaf separation strategy for AGB estimation is delineated. Convolutional neural network (CNN) and transfer learning (TL) methodologies are integrated to estimate leaf biomass (LGB) across multiple growth stages, followed by the development of an allometric growth model for estimating stem biomass (SGB). To enhance the precision of LGB inversion, the large-scale remote sensing data and image simulation framework over heterogeneous scenes (LESS) model, which is a three-dimensional (3D) radiative transfer model (RTM), was utilized to simulate a more extensive canopy spectral dataset, characterized by a broad distribution of canopy spectra. The CNN model was pre-trained in order to gain prior knowledge, and this knowledge was transferred to a re-trained model with a subset of field-observed samples. Finally, the allometric growth model was utilized to estimate SGB across various growth stages. To further validate the generalizability, transferability, and predictive capability of the proposed method, field samples from 2022 and 2023 were employed as target tasks. The results demonstrated that the 3D RTM + CNN + TL method outperformed best in LGB estimation, achieving an R² of 0.73 and an RMSE of 72.5 g/m² for the 2022 dataset, and an R² of 0.84 and an RMSE of 56.4 g/m² for the 2023 dataset. In contrast, the PROSAIL method yielded an R² of 0.45 and an RMSE of 134.55 g/m² for the 2022 dataset, and an R² of 0.74 and an RMSE of 61.84 g/m² for the 2023 dataset. The accuracy of LGB inversion was poor when using only field-measured samples to train a CNN model without simulated data, with R² values of 0.30 and 0.74. Overall, learning prior knowledge from the simulated dataset and transferring it to a new model significantly enhanced LGB estimation accuracy and model generalization. Additionally, the allometric growth model's estimation of SGB resulted in an accuracy of 0.87 and 120.87 g/m² for the 2022 dataset, and 0.74 and 86.87 g/m² for the 2023 dataset, exhibiting satisfactory results. Separate estimation of both LGB and SGB based on stem and leaf separation strategies yielded promising results. This method can be extended to the monitor and inversion of other critical variables. [ABSTRACT FROM AUTHOR]

The role of forests in providing multiple goods and services has been recognized worldwide. In such a context, reliable spatial predictions of forest attributes such as tree volume and current increment are fundamental for conducting forest monitoring, improving restoration programs, and supporting decision-making processes. This article presents the methodology and the results of the wall-to-wall spatialization of the growing stock volume and the current annual increment measured in 273 plots of data of the Italian National Forest Inventory over an area of more than 3260 km2 in the Friuli Venezia Giulia region (Northeast Italy). To this aim, a random forest model was tested using as predictors 4 spectral indices from Sentinel-2, a high-resolution Canopy Height Model derived from LiDAR, and geo-morphological data. According to the Leave One Out cross-validation procedure, the model for the growing stock shows an R2 and an RMSE% of 0.67 and 41%, respectively. Instead, an R2 of 0.47 and an RMSE% of 57% were obtained for the current annual increment. The validation with an independent dataset further improved the models' performances, yielding significantly higher R2 values of 0.84 and 0.83 for volume and for increment, respectively. Our results underline a relatively higher importance of LiDAR-derived metrics compared to other covariates in estimating both attributes, as they were even twice as important as vegetation indices for growing stock. Therefore, these metrics are promising for the development of a national LiDAR-based model. [ABSTRACT FROM AUTHOR]

The study of estimating rapeseed above-ground biomass (AGB) is of significant importance, as it can reflect the growth status of crops, enhance the commercial value of crops, promote the development of modern agriculture, and predict yield. Previous studies have mostly estimated crop AGB by extracting spectral indices from spectral images. This study aims to construct a model for estimating rapeseed AGB by combining spectral and LiDAR data. This study incorporates LiDAR data into the spectral data to construct a regression model. Models are separately constructed for the overall rapeseed varieties, nitrogen application, and planting density to find the optimal method for estimating rapeseed AGB. The results show that the R² for all samples in the study reached above 0.56, with the highest overall R² being 0.69. The highest R² for QY01 and ZY03 varieties was 0.56 and 0.78, respectively. Under high- and low-nitrogen conditions, the highest R² was 0.64 and 0.67, respectively. At a planting density of 36,000 plants per mu, the highest R² was 0.81. This study has improved the accuracy of estimating rapeseed AGB. [ABSTRACT FROM AUTHOR]

The estimate of carbon sequestration in terms of above-ground biomass (AGB) within the tree from the high-resolution image. The objective of this paper to assessment of AGB in Tad Sung Waterfall park forest in Kalasin province, Thailand. The allometric equations used to calculate the AGB from field measurement of 62 samples plot, by each plot has a dimension of 40m × 40 m. The normalized difference vegetation index (NDVI), soil-adjusted vegetation index (SAVI), and Fractional vegetation cover (FVC) from the satellite imagery was use to assessment of AGB using the geographically weighted regression (GWR) model. The results The results found that the total number of 4682 trees in the 62 sample plots and the calculated the AGB of the tree in the sample plot using the allometric equation was 79.6 Ton per hectare. The results of spatial analysis of AGB base on GWR found that the R² value of the global regression and GWR model were 0.366 and 0.856, respectively and the optimal bandwidth estimation for GWR in this study was 48.78. The adjusted R² values of the GWR model achieved a significant improvement in the global regression from 0.108 to 0.59. [ABSTRACT FROM AUTHOR]

The above-ground biomass (AGB) estimation monitoring provides a powerful tool for the assessment of carbon emission and sequestration. Using remote sensing technique is an environmentally friendly way of biomass estimation. Thus, this paper investigated optical (i.e. Landsat 8 OLI and Sentinel-2), synthetic aperture radar (SAR) (global phased array type L-band SAR (PALSAR/PALSAR-2) and Sentinel-1), and their integration for AGB estimation of the Pack demonstration forest in Warrensburg, NY. Importantly, a LiDAR AGB raster of the study area was used as reference data for training/testing purposes. Then, an extreme gradient boosting (Xgboost) machine learning model was used to predict biomass values. The major goal of this study was to compare the performance of pixel-based and object-based image analysis (OBIA) for the AGB estimation. Results indicated that the object-based approach improved the RMSE of AGB prediction about 6.28 Mg/ha for optical + SAR, 6.17 Mg/ha for SAR, and 5.6 Mg/ha for optical data in comparison to the pixel-based approach. Moreover, the combination of optical and SAR data increased the prediction accuracy regardless of feature extraction approach. [ABSTRACT FROM AUTHOR]

Monitoring biomass changes in the Mediterranean ecosystems is important for better understanding their responses to climatic and anthropogenic changes. Multi-frequency SAR data (L-band PASLAR and C-band Sentinel-1) is investigated for developing a biomass estimation model along a climatic gradient in Israel. First, the relationships between biomass and transmissivity at various frequencies are discussed. Multi-frequency polarimetric radar vegetation index (MPRVI) is then proposed utilizing the ensemble average of degree of polarization and cross-polarized backscattering coefficients. After randomly partitioning the data for training set and testing set, the new MPRVI-based biomass model is evaluated. It shows a good agreement with reference biomass data with an r-square of 0.899 and a root-mean-squared error (RMSE) of 0.381 kg/m2 and with a relative RMSE (RRMSE) of 10.8%. [ABSTRACT FROM AUTHOR]

Simple Summary: This research addresses the problem of biomass estimation and fish development monitoring by developing and meticulously validating a computer-vision-interpretable methodology for fish biometrics based on the extraction of statistical features of shape and size through a signature function. This is done by comparing manually extracted features in machine learning predictions against the computer vision (image feature extraction) machine learning predictions. This research shows promising results in statistical accuracy and error metrics, especially the computer vision methodology plus artificial neural networks for biomass prediction. It is concluded that the signature-function-based methodology plus the neural networks regression is competitive for biomass estimation and provides a powerful interpretable tool for species morphology development research. As a result, from a better understanding of fish development and biomass estimation, the aquaculture sector can improve production, wasting less animal food and detecting fish welfare problems through deformity detection, which translates into reduced costs and improved quality of animal meat. Aquaculture requires precise non-invasive methods for biomass estimation. This research validates a novel computer vision methodology that uses a signature function-based feature extraction algorithm combining statistical morphological analysis of the size and shape of fish and machine learning to improve the accuracy of biomass estimation in fishponds and is specifically applied to tilapia (Oreochromis niloticus). These features that are automatically extracted from images are put to the test against previously manually extracted features by comparing the results when applied to three common machine learning methods under two different lighting conditions. The dataset for this analysis encompasses 129 tilapia samples. The results give promising outcomes since the multilayer perceptron model shows robust performance, consistently demonstrating superior accuracy across different features and lighting conditions. The interpretable nature of the model, rooted in the statistical features of the signature function, could provide insights into the morphological and allometric changes at different developmental stages. A comparative analysis against existing literature underscores the competitiveness of the proposed methodology, pointing to advancements in precision, interpretability, and species versatility. This research contributes significantly to the field, accelerating the quest for non-invasive fish biometrics that can be generalized across various aquaculture species in different stages of development. In combination with detection, tracking, and posture recognition, deep learning methodologies such as the one provided in the latest studies could generate a powerful method for real-time fish morphology development, biomass estimation, and welfare monitoring, which are crucial for the effective management of fish farms. [ABSTRACT FROM AUTHOR]

Milk vetch (Astragalus sinicus L.) is a winter-growing plant that can enhance soil fertility and provide essential nutrients for subsequent season crops. The fertilizing capacity of milk vetch is closely related to its above-ground biomass. Compared to the manual measurement methods of milk vetch biomass, remote sensing-based estimation methods have the advantages of rapid, noninvasive, and large-scale measurement. However, few studies have been conducted on remote sensing-based estimation of milk vetch biomass. To address this shortcoming, this study proposes combining unmanned aerial vehicle (UAV)-based hyperspectral imagery and machine learning algorithms for accurate estimation of milk vetch biomass. Through the analysis of hyperspectral images and feature selection based on the Pearson correlation and principal component analysis, vegetation indices (VIs), including near-infrared reflectance (NIR), red-edge spectral transform index (RE), and difference vegetation index (DVI), are selected as estimation metrics of the model development process. Four machine learning methods, including random forest (RF), multiple linear regression (MLR), deep neural network (DNN), and support vector machine (SVM), are used to construct the biomass models. The results show that the RF estimation model exhibits the highest coefficient of determination (R2) of 0.950 and the lowest relative root-mean-squared error (RRMSE) of 14.86% among all the models. Notably, the DNN model demonstrates promising performance on the test set, with the R2 and RRMSE values slightly superior and inferior to those of the RF, respectively. The proposed method based on UAV imagery and machine learning can provide an accurate and reliable large-scale estimation of milk vetch biomass. [ABSTRACT FROM AUTHOR]

A recently proposed modelling strategy predicts the net primary production (NPP) of forest ecosystems by combining the outputs of a NDVI-driven model, Modified C-Fix, and a bio-geochemical model, BIOME-BGC. This combination strategy takes into account the effects of forest disturbances but still assumes the presence of a mixture of differently aged trees. The application of this strategy to even-aged forests, therefore, requires a methodological advancement aimed at properly modifying the modelling of main ecosystem processes. In particular, the adaptation of the method to even-aged forests is based on the use of high-spatial-resolution airborne laser scanning (ALS) datasets, which yields green and woody biomass estimates that regulate the simulation of photosynthetic and respiratory processes, respectively. This approach was experimented in a Mediterranean study area, San Rossore Regional Park (Central Italy), which is covered by even-aged pine stands in different development phases. The modelling strategy is driven by MODIS NDVI images and meteorological data across five years (2011–2015), which are combined with estimates of forest canopy cover and height obtained from ALS data taken in 2015. This allows the production of stand NPP estimates, which, when converted into respective current annual increment (CAI) values, reasonably reproduce the age dependency of the available ground observations. The CAI estimates also show a highly significant correlation with these observations (r = 0.773) and moderate error levels (RMSE = 2.03 m3 ha−1 year−1, MBE = −0.45 m3 ha−1 year−1). These results confirm the potential of the modified simulation method to yield accurate high-spatial-resolution NPP estimates, which can offer valuable insights into C cycling and storage, in even-aged forests. [ABSTRACT FROM AUTHOR]

Accurate estimation of livestock carrying capacity (LCC) and implementation of an appropriate actual stocking rate (ASR) are key to the sustainable management of grazing adapted alpine grassland ecosystems. The reliable determination of aboveground biomass is fundamental to these determinations. Peak aboveground biomass (AGBP) captured from satellite data at the peak of the growing season (POS) is widely used as a proxy for annual aboveground biomass (AGBA) to estimate LCC of grasslands. Here, we demonstrate the limitations of this approach and highlight the ability of POS in the estimation of ASR. We develop and trail new approaches that incorporate remote sensing phenology timings of grassland response to grazing activity, considering relations between biomass growth and consumption dynamics, in an effort to support more accurate and reliable estimation of LCC and ASR. The results show that based on averaged values from large-scale studies of alpine grassland on the Qinghai-Tibet Plateau (QTP), differences between AGBP and AGBA underestimate LCC by about 31%. The findings from a smaller-scale study that incorporate phenology timings into the estimation of annual aboveground biomass reveal that summer pastures in Haibei alpine meadows were overgrazed by 11.5% during the study period from 2000 to 2005. The methods proposed can be extended to map grassland grazing pressure by predicting the LCC and tracking the ASR, thereby improving sustainable resource use in alpine grasslands. [ABSTRACT FROM AUTHOR]

Remote sensing datasets offer robust approaches for gaining reliable insights into forest ecosystems. Despite numerous studies reviewing forest aboveground biomass estimation using remote sensing approaches, a comprehensive synthesis of synergetic integration methods to map and estimate forest AGB is still needed. This article reviews the integrated remote sensing approaches and discusses significant advances in estimating the AGB from space- and airborne sensors. This review covers the research articles published during 2015–2023 to ascertain recent developments. A total of 98 peer-reviewed journal articles were selected under the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines. Among the scrutinized studies, 54 were relevant to spaceborne, 22 to airborne, and 22 to space- and airborne datasets. Among the empirical models used, random forest regression model accounted for the most articles (32). The highest number of articles utilizing integrated dataset approaches originated from China (24), followed by the USA (15). Among the space- and airborne datasets, Sentinel-1 and 2, Landsat, GEDI, and Airborne LiDAR datasets were widely employed with parameters that encompassed tree height, canopy cover, and vegetation indices. The results of co-citation analysis were also determined to be relevant to the objectives of this review. This review focuses on dataset integration with empirical models and provides insights into the accuracy and reliability of studies on AGB estimation modeling. [ABSTRACT FROM AUTHOR]

In the field of crop research, the study of roots involves many challenges, particularly the lack of effective methods for identifying crop roots. To deal with this problem, this study proposes a solution strategy: in applying strontium to crop leaves, the roots of different crops are distinguished. In this study, we applied strontium ions to the leaves of hydroponically grown wheat, and these strontium ions were partially absorbed by the leaves and transported to the roots. Therefore, the strontium concentration of roots was significantly increased through the foliar application of strontium. After mixing the treated wheat with the untreated wheat root, the greater the biomass of the wheat root applied with strontium ions, the higher the strontium concentration in the mixed root. Based on this phenomenon, we can establish the relationship between wheat root biomass and strontium concentration in mixed roots through linear fitting. Furthermore, we can also use the relationship between root biomass and root length to establish the correlation between strontium concentration in mixed roots and the root length of wheat with strontium ions. After measuring the strontium concentration of the mixed roots to be distinguished, the root biomass and root length of wheat applied with strontium ions can be calculated according to the equation obtained through linear fitting. The accuracy of this method was verified through a comparison with the actual value and the existing root staining method. The results show that the coefficient of determination (R2) of the root biomass estimation equation obtained through linear fitting reached 0.83, which is statistically significant (p < 0.01). The Pearson correlation coefficient with the measured value was more than 0.9, showing a very high correlation and significance. The root length estimation equation derived from the relationship between the root biomass, strontium concentration and root length was compared with the real root length value and the root length value obtained using the staining method. The Pearson correlation coefficient also exceeded 0.8 and reached a statistically significant level (p < 0.01). This study confirms that strontium ions can be absorbed and transported to roots through wheat leaves and successfully developed a new method for predicting the length of wheat roots, providing an effective new tool for wheat root research. [ABSTRACT FROM AUTHOR]

Morocco's argan trees, native to forests, are now cultivated in large orchards within the Argan Biosphere Reserve, transforming "Arganiculture". These orchards are anticipated to bolster carbon storage, but their precise contribution to carbon storage remains unclear. This study introduces for the first time allometric equations for estimating biomass in different components of argan plants within orchards. A total of 89 plant individuals, aged 2 to 6 years, were collected. Their diameter and total height were measured. The biomass, carbon content, and biomass carbon stock of each component were determined. The best-fit allometric equation incorporates diameter, height, growing years, and root-to-shoot ratio to estimate total biomass (R2 = 0.95). The estimated total carbon biomass stock ranged from 0.01 to 0.82 t CO2 ha−1 for plants, at a density of 200 plants ha−1. Between 2021 and 2023, the average annual carbon sequestration was 0.20 t CO2 ha−1 year−1. This model offers valuable tools for use when species-specific equations during the establishment growing stage are unavailable, enhancing carbon sequestration quantification for more reliable results and informing climate change mitigation strategies. The allometric parameters serve as benchmarks for trees resembling the argan tree. The methodology could be adapted for other forest plants undergoing conversion to orchard cultivation. [ABSTRACT FROM AUTHOR]

Above-ground biomass (AGB) is a critical criterion for assessing the ecological value and productivity of grasslands. Quickly and accurately estimating the AGB of grasslands has become a matter of great concern in grassland ecosystem research. By combining ground ASD hyperspectral data and airborne hyperspectral data, this study successfully extracted the sensitive bands of canopy reflectance and calculated the various vegetation indexes, thus providing information of more dimensions for above-ground biomass estimation. Biomass inversion-based yield modeling results reveal that the 377 nm raw band reflectance of the ASD data and the narrow-band vegetation index of the Resonon data exhibit outstanding performance in yield modeling. Comparative analysis indicates that the Resonon hyperspectral data demonstrate a distinct advantage in assessing meadow steppe yield, and the quadratic polynomial model based on its narrow-band SAVI achieves an R² of 0.553 and an RMSE of 37.53. [ABSTRACT FROM AUTHOR]

Chlorella vulgaris is of great importance in numerous exploratory or industrial applications (e.g., medicals, food, and feed additives). Rapid quantification of algal biomass is crucial in photobioreactors for the optimization of nutrient management and the estimation of production. The main goal of this study is to provide a simple, rapid, and not-resource-intensive estimation method for determining the algal density of C. vulgaris according to the measured parameters using UV–Vis spectrophotometry. Comparative assessment measurements were conducted with seven different methods (e.g., filtration, evaporation, chlorophyll a extraction, and detection of optical density and fluorescence) to determine algal biomass. By analyzing the entire spectra of diluted algae samples, optimal wavelengths were determined through a stepwise series of linear regression analyses by a novel correlation scanning method, facilitating accurate parameter estimation. Nonlinear formulas for spectrometry-based estimation processes were derived for each parameter. As a result, a general formula for biomass concentration estimation was developed, with recommendations for suitable measuring devices based on algae concentration levels. New values for magnesium content and the average single-cell weight of C. vulgaris were established, in addition to the development of a rapid, semiautomated cell counting method, improving efficiency and accuracy in algae quantification for cultivation and biotechnology applications. [ABSTRACT FROM AUTHOR]

Timely and accurate estimation of Above-Ground-Biomass (AGB) in cotton is essential for precise production monitoring. The study was conducted in Shaya County, Aksu Region, Xinjiang, China. It employed an unmanned aerial vehicle (UAV) as a low-altitude monitoring platform to capture multispectral images of the cotton canopy. Subsequently, spectral features and textural features were extracted, and feature selection was conducted using Pearson's correlation (P), Principal Component Analysis (PCA), Multivariate Stepwise Regression (MSR), and the ReliefF algorithm (RfF), combined with the machine learning algorithm to construct an estimation model of cotton AGB. The results indicate a high consistency between the mean (MEA) and the corresponding spectral bands in textural features with the AGB correlation. Moreover, spectral and textural feature fusion proved to be more stable than models utilizing single spectral features or textural features alone. Both the RfF algorithm and ANN model demonstrated optimization effects on features, and their combination effectively reduced the data redundancy while improving the model performance. The RfF-ANN-AGB model constructed based on the spectral and textural features fusion worked better, and using the features SIPI2, RESR, G_COR, and RE_DIS, exhibited the best performance, achieving a test sets R2 of 0.86, RMSE of 0.23 kg·m−2, MAE of 0.16 kg·m−2, and nRMSE of 0.39. The findings offer a comprehensive modeling strategy for the precise and rapid estimation of cotton AGB. [ABSTRACT FROM AUTHOR]

Accurately estimating vegetation biomass in urban forested areas is of great interest to researchers as it is a key indicator of the carbon sequestration capacity necessary for cities to achieve carbon neutrality. The emerging vegetation biomass estimation methods that use AI technologies with remote sensing images often suffer from arge estimating errors due to the diversity of vegetation and the complex three-dimensional terrain environment in urban ares. However, the high resolution of Light Detection and Ranging (i.e., LiDAR) data provides an opportunity to accurately describe the complex 3D scenes of urban forests, thereby improving estimation accuracy. Additionally, deep earning foundation models have widely succeeded in the industry, and show great potential promise to estimate vegetation biomass through processing complex and arge amounts of urban LiDAR data efficiently and accurately. In this study, we propose an efficient and accurate method called 3D-CiLBE (3DCity Long-term Biomass Estimation) to estimate urban vegetation biomass by utilizing advanced deep earning foundation models. In the 3D-CiLBE method, the Segment Anything Model (i.e., SAM) was used to segment single wood information from a arge amount of complex urban LiDAR data. Then, we modified the Contrastive Language–Image Pre-training (i.e., CLIP) model to identify the species of the wood so that the classic anisotropic growth equation can be used to estimate biomass. Finally, we utilized the Informer model to predict the biomass in the ong term. We evaluate it in eight urban areas across the United States. In the task of identifying urban greening areas, the 3D-CiLBE achieves optimal performance with a mean Intersection over Union (i.e., mIoU) of 0.94. Additionally, for vegetation classification, 3D-CiLBE achieves an optimal recognition accuracy of 92.72%. The estimation of urban vegetation biomass using 3D-CiLBE achieves a Mean Square Error of 0.045 kg/m2, reducing the error by up to 8.2% compared to 2D methods. The MSE for biomass prediction by 3D-CiLBE was 0.06kg/m2 smaller on average than the inear regression model. Therefore, the experimental results indicate that the 3D-CiLBE method can accurately estimate urban vegetation biomass and has potential for practical application. [ABSTRACT FROM AUTHOR]

Cities play a crucial role in the carbon cycle. Measuring urban aboveground biomass (AGB) is essential for evaluating carbon sequestration. Satellite remote sensing enables large-scale AGB inversion. However, the apparent differences between forest and grassland biomass pose a significant challenge to the accurate estimation of urban AGB using satellite-based data. To address this limitation, this study proposed a novel AGB estimation method using the eastern part of the Zhahe mining area in Huaibei City as the study area, which integrates land cover classification, feature selection, and machine learning modelling to generate high quality biomass maps of different vegetation types in an urban area with complex feature distribution. Utilizing the GEE platform and Sentinel-2 image, we developed an object-oriented machine learning classification algorithm, combining SNIC and GLCM to extract vegetation information. Optimal feature variables for forest and crop-grass AGB inversion were selected using the Pearson–mRMR algorithm. Finally, we constructed nine machine learning models for AGB inversion and selected the model with the highest accuracy to generate the AGB map of the study area. The results of the study are as follows: (1) Compared with the pixel-based classification method, the object-oriented classification method can extract the boundaries of different vegetation types more accurately. (2) Forest AGB is strongly correlated with vegetation indices and physiological parameters, while agri-grass AGB is primarily associated with vegetation indices and vegetation physiological parameters. (3) For forest AGB modelling, the RF-R model outperforms other machine learning models with an R2 of 0.77. For agri-grass AGB modelling, the XGBoost-R model is more accurate, with an R2 of 0.86. (4) The mean forest AGB in the study area was 4.60 kg/m2, while the mean agri-grass AGB was 0.71 kg/m2. High AGB values were predominantly observed in forested areas, which were mainly distributed along roads, waterways, and mountain ranges. Overall, this study contributes to a better understanding of the health of local urban ecosystems and provides valuable insights for ecosystem protection and the sustainable use of natural resources. [ABSTRACT FROM AUTHOR]