Search

Systematic measurement of pasture biomass (kg DM/ha) is crucial for optimising pasture utilisation and increasing dairy farm profitability. On-farm pasture monitoring can be conducted using various sensors, but calibrations are necessary to convert the measured variable into pasture biomass. In this study, we conducted three experiments in New South Wales (Australia) to evaluate the use of the rising plate meter (RPM), pasture reader (PR), unmanned aerial vehicles (UAV) and satellites as pasture monitoring tools. We tested various calibration methods that can improve the accuracy of the estimations and be implemented more easily on-farm. The results indicate that UAV and satellite-derived reflectance indices (e.g., Normalised Difference Vegetation Index) can be indirectly calibrated with height measurements obtained from an RPM or PR. Height measurements can be then converted into pasture biomass ideally by conducting site-specific sporadic calibrations cuts. For satellites, using the average of the entire paddock, root mean square error (RMSE) = 226 kg DM/ha for kikuyu (Pennisetum clandestinum Hochst. ex Chiov) and 347 kg DM/ha for ryegrass (Lolium multiflorum L.) is as effective as but easier than matching NDVI pixels with height measurement using a Global Navigation Satellite System (RMSE = 227 kg DM/ha for kikuyu and 406 kg DM/ha for ryegrass). For situations where no satellite images are available for the same date, the average of all images available within a range of up to four days from the day ground measurements were taken could be used (RMSE = 225 kg DM/ha for kikuyu and 402 kg DM/ha for ryegrass). These methodologies aim to develop more practical and easier-to-implement calibrations to improve the accuracy of the predictive models in commercial farms. However, more research is still needed to test these hypotheses under extended periods, locations, and pasture species. [ABSTRACT FROM AUTHOR]

Herbicide resistance is an important weed management issue. Glyphosate is the most dominant herbicide, which controls a broad spectrum of weeds, including grasses such as Lolium rigidum. Lolium rigidum is a major weed of winter crops in Australia that is developing glyphosate resistance in increasing numbers of populations and has been observed growing throughout summer in recent years. Three L. rigidum populations, one summer-emerging glyphosate-resistant (GR), one winter-emerging glyphosate-susceptible (GS), and one winter-emerging population with unknown resistance status (CC04), were analyzed for target-site resistance to glyphosate after confirming their resistance or susceptibility to glyphosate in a dose–response experiment. Population GR was obtained from plants that emerged in summer and contained plants that survived all rates of glyphosate applied (0 to 4560 g a.e. ha−1). It was found to be 6.1 and 4.4 times more resistant than population GS across two experiments. Population CC04 was identified as susceptible. Plants from each population were analyzed for the presence of target-site mutations in the conserved region of the EPSPS gene; however, no mutations were identified that could cause resistance, suggesting non-target-site resistance in population GR. The effectiveness of alternative herbicides was also analyzed for each population. Paraquat was the most effective herbicide, with 0% survival across all populations. The ACCase-inhibiting herbicide clethodim was also highly effective (0 to 8% survival across populations). Other ACCase-inhibiting herbicides, propaquizafop, haloxyfop, and pinoxaden, were effective at controlling the two susceptible populations, CC04 and GS (0 to 36% and 0 to 20% survival, respectively), but were only moderately effective for controlling GR (28 to 51% survival). Paraquat and clethodim may be alternative options for controlling GR populations of L. rigidum and could be effective for use in management programs to slow the development of GR populations. [ABSTRACT FROM AUTHOR]

The legacy of deliberate and accidental introductions of invasive alien species to Australia has had a hefty economic toll, yet quantifying the magnitude of the costs associated with direct loss and damage, as well as for management interventions, remains elusive. This is because the reliability of cost estimates and undersampling have not been determined. We provide the first detailed analysis of the reported costs associated with invasive species to the Australian economy since the 1960s, based on the recently published InvaCost database and supplementary information, for a total of 2078 unique cost entries. Since the 1960s, Australia has spent or incurred losses totalling at least US$298.58 billion (2017 value) or AU$389.59 billion (2017 average exchange rate) from invasive species. However, this is an underestimate given that costs rise as the number of estimates increases following a power law. There was an average 1.8-6.3-fold increase in the total costs per decade since the 1970s to the present, producing estimated costs of US$6.09-57.91 billion year-1 (all costs combined) or US$225.31 million-6.84 billion year-1 (observed, highly reliable costs only). Costs arising from plant species were the highest among kingdoms (US$151.68 billion), although most of the costs were not attributable to single species. Of the identified weedy species, the costliest were annual ryegrass (Lolium rigidum), parthenium (Parthenium hysterophorus) and ragwort (Senecio jacobaea). The four costliest classes were mammals (US$48.63 billion), insects (US$11.95 billion), eudicots (US$4.10 billion) and monocots (US$1.92 billion). The three costliest species were all animals - cats (Felis catus), rabbits (Oryctolagus cuniculus) and red imported fire ants (Solenopsis invicta). Each State/Territory had a different suite of major costs by species, but with most (3-62%) costs derived from one to three species per political unit. Most (61%) of the reported costs applied to multiple environments and 73% of the total pertained to direct damage or loss compared to management costs only, with both of these findings reflecting the availability of data. Rising incursions of invasive species will continue to have substantial costs for the Australian economy, but with better investment, standardised assessments and reporting and coordinated interventions (including eradications), some of these costs could be substantially reduced. [ABSTRACT FROM AUTHOR]

Perennial ryegrass (PRG) is an important forage grown on dairy farms in temperate regions globally, including south-eastern Australia. A forage value index (FVI) providing information on the seasonal production of commercially available PRG cultivars is currently available. Despite the importance of the nutritive value of pasture in dairy farm systems, the nutritive characteristics of PRG cultivars are not currently included in the FVI as they are not routinely measured in cultivar evaluation trials. This study investigated differences between cultivar functional groups (diploid and tetraploid). It also examined differences between individual cultivars within seasons at four locations in south-eastern Australia and examined how trial location affects cultivar ranking. Samples were collected from existing cultivar evaluation trials over a 3-year period and analysed for nutritive characteristics. There were differences (p < 0.05) between diploids and tetraploids for metabolisable energy (ME) and neutral detergent fibre (NDF) in each season at each location with a few exceptions in summer and autumn. Crude protein (CP) differed between functional groups in some seasons at some sites. Spearman rank correlations within season were strong for ME between trial locations (r = 0.78–0.96), moderate to high for NDF (0.51–0.86) and variable for CP (−0.69–0.56). These findings provide guidance on methods for implementing nutritive value testing in cultivar evaluation trials and support the imminent inclusion of ME in the Australian FVI. The ranking of cultivars for ME was more consistent across trial sites compared to NDF and CP, suggesting the latter two traits, in particular CP, are more sensitive to environmental influences. Based on these results, we do not recommend the inclusion of CP as an individual trait in the Australian FVI. A significantly larger dataset and further research on the genotype by environment interactions would be needed to reconsider this. The addition of ME in the Australian FVI will lead to better cultivar choices by farmers and could lead to more targeted perennial ryegrass breeding programs. [ABSTRACT FROM AUTHOR]