Search

Multipores engineering composed of micro/mesopores is an effective strategy to improve potassium storage performance via providing enormous adsorption sites and shortened ions diffusion distance. However, a detailed exploration of the role played by macropores in potassium storage is still lacking and has been barely reported until now. Herein, a superstructure carbon hexahedron (DGN‐900) is synthesized using poly tannic acid (PTA) as precursor. Due to the spatially confined two‐step local contraction of PTA along different directions and dimensions during pyrolysis, defective nanosheets with macropores are formed, while realizing a balance between defects content and graphitization degree by regulating temperature. The presence of macropores is conducive to accelerating electrolyte ions rapid infiltration within electrode, and its pore volume can accommodate electrode structure fluctuation upon cycling, while the most suitable ratio of defects to graphitic provides rich ions adsorption sites and sufficient electrons transfer channels, simultaneously. These advantages enable a prominent electrochemical performance in DGN‐900 electrode, including high rate (202.9 mAh g−1 at 2 A g−1) and long cycling stability over 2000 cycles. This unique fabrication strategy, that is, defects engineering coupled with macropores structure, makes fast and durable potassium storage possible. [ABSTRACT FROM AUTHOR]

Synopsis: Lignin porous carbon/PANI composites were prepared via in- situ polymerization using lignin as carbon precursor. The PANI nanofibers interpenetrate the lamellar structure of lignin porous carbon, which endows high accessibility to ions and fast transfer for electrons, leading to the superior capacitance for the composite and the high energy density when assembled into supercapacitor. [Display omitted] Lignin porous carbons show good potential as carbon electrode materials for supercapacitors, but face the problem of low capacitance. Combining lignin porous carbons with polyaniline can achieve high capacitance. However, capacitance degradation resulting from the poor compatibility between lignin porous carbons and polyaniline has been the major obstacle for their application. In this work, three lignin porous carbons with different geometries were used as the hosts to anchor polyaniline for carbon/polyaniline composites via in- situ oxidative polymerization, and the compatibility between lignin porous carbons and polyaniline was investigated. It was determined the lamellar hierarchical lignin porous carbon with crumpled nanosheets can provide a large accessible surface area for the heterogeneous nucleation of aniline, which ensures uniform loading of interpenetrating polyaniline nanofibers. Benefiting from the interpenetrating conductive network and enhanced compatibility, the lamellar hierarchical porous carbon/polyaniline composite possesses a high capacitance of up to 643 F/g at 1.0 A/g and a sufficient capacitance of 390 F/g at 30.0 A/g. This work therefore provides design guidance for carbon hosts in high-performance supercapacitor composite electrodes. [ABSTRACT FROM AUTHOR]

Microbial extracellular electron transfer (EET) plays a vital role in globally important environmental phenomena, including bioremediation, bioenergy generation, and biofuel production. The quantitation of microbial exoelectrogenic ability is fundamental to studying the process of EET. However, there is no accurate and time-saving protocol to directly evaluate EET ability, hindering our understanding and application of EET. In this work, we proposed an accurate and rapid quantitation system for measuring EET ability using a gold-coated membrane filter as a working electrode. The quantitation signals could be recorded within 1 h and accurately normalized by the number of cells with outstanding repeatability and reproducibility. Further, this method could be distinguished microbial direct EET performances of different growth stages, and the results showed the middle logarithmic growth stage of Shewanella onedensis MR-1 had the best electrochemical activity. This method can be widely used for different types of electroactive microorganisms, including gram-negative bacteria, gram-positive bacteria, and fungi. Due to its time savings, accurate quantification and easy operation, this method provides a standard way to assess the role of EET ability. • RQEET combined the features of filtration and conductivity to obtain a new type of electrode. • RQEET can quantify microbial EET ability in a short time (≤1 h). • RQEET shows great repeatability by controlling the number and growth stage of loading cells. • RQEET is flexible to integrate into biological techniques for molecular studies. [ABSTRACT FROM AUTHOR]

[Display omitted] Under the context of energy shortages and global warming, the photocatalytic reduction of carbon dioxide (CO 2) to carbon monoxide (CO) using simulated sunlight has attracted considerable research attention. Herein, three-dimensional (3D) Z-scheme cobalt–alumina-layered double hydroxide/bismuth oxybromide (CoAl-layered double hydroxide (LDH)/BiOBr) heterojunction photocatalysts with oxygen vacancies were constructed by intercalating two-dimensional CoAl-LDH between BiOBr layers in the mechanical mixing. The conversion of CO 2 in the water phase was greatly improved compared to CoAl-LDH/BiOBr under 300-W xenon light. The transformation efficiency of 23.62 μmol⋅g−1⋅h−1 for CoAl-LDH/BiOBr-10 (CBO-10) is 2.96 and 8.34 times that of pure BiOBr and CoAl-LDH, respectively, with CO selectivity in the obtained products reaching as high as 95 %. Furthermore, CBO-10 catalysts exhibited outstanding stability in terms of structure and catalytic performance. The construction of Z-scheme heterojunctions and oxygen vacancies enlarges the photoresponse range of the BiOBr catalyst while reducing the photoelectron–hole recombination efficiency. The unique 3D structure offers more Z-scheme heterojunction interfaces for the separation and transfer of electrons between CoAl-LDH and BiOBr during photoreaction. This study is expected to guide the development of new high-performance photocatalysts and the selective regulation of reduction products. [ABSTRACT FROM AUTHOR]

Selective catalytic reduction of NO x with ammonia (NH 3 -SCR) under the exposure of multiple poisons in fly ash remains a great challenging issue for environmental protection. Herein, the intelligently self-tunable defense effects of Ce(SO 4) 2 additive modification for the V 2 O 5 /CeO 2 catalyst with excellent resistance against K and Zn co-poisoning was originally illustrated. The Ce(SO 4) 2 additive could firstly act as an inhibitor to certainly restrain the electron transfer between V and Ce species to decrease the redox property, but the high NO x reduction efficiency of Ce(SO 4) 2 modified fresh catalyst could be maintained due to the enhancement of vanadium species polymerization and acidity. Unexpectedly, the Ce(SO 4) 2 additive would smartly translate to act as a promoter over the co-poisoned catalyst to effectively combine with poisons, thus releasing most active vanadium species to exhibit superior co-poisoning resistance to K and Zn. This work provides a novel self-tunable multi-poisoning-resistant strategy via acid additive modification for SCR catalysts. [Display omitted] • Ce(SO 4) 2 modified vanadia catalyst was obtained to fight K and Zn co-poisoning. • Ce(SO 4) 2 modification greatly improved NO x conversion and co-poisoning resistance. • Ce(SO 4) 2 was inhibitor to restrain electron transfer between active V and Ce sites. • Ce(SO 4) 2 translates to promoter to fix K and Zn poisons among poisoned catalysts. [ABSTRACT FROM AUTHOR]

A P/N co-doped three dimensional (3D) interconnected carbon nanocage was synthesized and highly stable electrochemical performance for potassium-ion batteries was realized. [Display omitted] Heteroatoms doping strategies are often considered to be an effective approach to provide rich active sites for capacitive-controlled potassium storage, and enlarged interspacing for intercalation process. However, the excess doping level will form a large number of sp3 defects and thus severely damage π-conjugated system, which is unfavorable for electron transfer. Herein, a P/N co-doped three-dimensional (3D) interconnected carbon nanocage (denoted as PN-CNC) is prepared with the help of a template-assisted method. The use of template and P heteroatom can contribute to forming a 3D interconnected carbon nanocage to prevent conductive carbon matrix from being excessively damaged, favoring a high electronic conductivity. The co-existence of P/N doping configurations with suitable content not only generate abundant defects, edge-voids, and micropores for significant capacitive behaviors, but also supply adequate interlayer space for intercalation process, and all these together ensure enhanced ion storage. As a result, the optimized PN-CNC electrode exhibits an exceptional reversible capacity (262 mAh g−1) and a superior rate capability (214.2 mAh g−1). Besides, long-term cycling stability is easily fulfilled by delivering a high capacity of 188.7 mAh g−1 at 2 A g−1 after 3000 cycles. [ABSTRACT FROM AUTHOR]

Rechargeable aqueous Zn//MnO 2 batteries are the promising alternatives to lithium-ion batteries owing to their high safety, high energy density, low cost, and environmental friendliness. However, the unstable MnO 2 cathode causes poor practical energy density and serious capacity fading. To overcome this issue, herein, a unique 2D nanosheets self-supported 3D δ -MnO 2 microflower hierarchical architecture is rationally designed and synthesized by taking advantage of its microwave-absorbing characteristics. The 2D nanosheets with high surface area could expose numerous active sites for ions/electrons transfer. Also, the 3D assembled structure acting as building blocks would ensure structural stability for long-life cycles. Benefiting from these synergistic merits, the δ -MnO 2 microflowers deliver a high capacity of 287.6 mA h g−1 at 0.5 C, an excellent rate capability of 202.7 mA h g−1 at 5 C, and a superior cycling retention of 76.5% over 1000 cycles at 10 C. Furthermore, a storage mechanism of H+/Zn2+ co-insertion accompanied by the deposition of zinc sulfate hydroxide hydrate is clarified by the aid of ex-situ XRD and SEM technologies. This work provides a new pathway for developing high capacity and long lifespan ZIBs. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • Perovskite was used for asymmetric electrocarboxylation of aromatic ketones. • 85% yield and 95% enantiomeric excess were obtained on La 0.7 Sr 0.3 Fe 0.8 Ni 0.2 O 3. • The high-performance mainly results from the increased concentration of O2– and Fe4+. • La 0.7 Sr 0.3 Fe 0.8 Ni 0.2 O 3 has enhanced intrinsic electrochemical performance. The perovskite oxides La 0.7 Sr 0.3 Fe 0.8 B 0.2 O 3 (B = Ti, Mn, Co, Ni and Cu) synthesized by sol–gel method were used as cathodes and tested in asymmetric electrocarboxylation of aromatic ketones. The study showed the La 0.7 Sr 0.3 Fe 0.8 Ni 0.2 O 3 (La7Sr3Fe8Ni2) catalyst is more active for asymmetric electrocarboxylation of acetophenone with 95% enantiomeric excess and 85% yield. The high electrocatalytic activity is attributed mainly to several factors, including the increased amount of lattice oxygen and Fe4+ species on the surface of La7Sr3Fe8Ni2, enhanced electrochemically active surface area and faster electron transfer. Furthermore, La7Sr3Fe8Ni2 also exhibited remarkable stability and reusability. [ABSTRACT FROM AUTHOR]

The use of metal-free graphite carbon nitride (CN) to activate peroxymonosulfate (PMS) has attracted extensive attention for organic pollutants degradation. In this work, we prepared carbonized polydopamine-decorated g-C 3 N 4 (CP-700) for activation of PMS to degrade norfloxacin (NOR). The CP-700 composite was obtained by using CN as a base material on which dopamine underwent an autopolymerization reaction to form a CN-PDA complex, followed by pyrolysis. The apparent porous structure and graphitization provided a large number of active sites for catalytic degradation, enabling CP-700 to exhibit excellent catalytic performance during PMS activation. The degradation of NOR was not hindered by sulfate radical (SO 4 •–) and hydroxyl radical (•OH). Singlet oxygen (1O 2) and mediated electron transfer were ultimately identified as the primary mechanisms. According to the linear positive correlation (R2 = 0.9922) between the semi-quantitative carbonyl group (C O) and the reaction rate constant, it was determined that the carbonyl group served as the important active site. The excellent electron transfer ability of CP-700 was evidenced by electrochemical techniques and the electron transfer pathway in the system was that PMS was adsorbed on the CP-700 surface to form metastable complex, and then the electron transfer between NOR and metastable complex was achieved. Based on the non-radical pathway, CP-700/PMS system showed a high tolerance to solution pH (3.0–11.0) and inorganic anions. The cyclic degradation experiments indicated that the system maintained a high degradation capability without the addition of additional CP-700, elucidating its potential application in the degradation of organic pollutants in the water. [Display omitted] • CP-700 had a better catalytic reactivity than CN-700 at a lower dosage. • 1O 2 was the primary reactive oxygen species responsible for NOR degradation. • Carbonyl groups and graphitic N served as the main active sites for PMS activation. • CP-700/PMS system exhibited excellent pH tolerance and more effective use of PMS. [ABSTRACT FROM AUTHOR]

[Display omitted] • An anti-perovskite Ni 3 FeN/VN heterostructure is designed for Zn-air batteries. • The anti-perovskite Ni 3 FeN with the metallic behavior contributes to electron transfer. • Abundant catalytic active sites are formed at the heterogeneous interface. • The Ni 3 FeN/VN–NG displays excellent bifunctional activity with a ΔE value of 0.69 V. High-performance rechargeable zinc–air battery is highly relying on the efficient and stable bifunctional electrocatalysts. Herein, an anti-perovskite Ni 3 FeN/VN heterostructure encapsulated N–doped graphene (Ni 3 FeN/VN–NG) was synthesized by a two-step transformation of trimetallic NiFeV–layered double hydroxide. The Ni 3 FeN/VN–NG showed excellent bifunctional catalytic activity (ΔE = 0.69 V) and stability. The excellent bifunctional electrocatalytic performance is benefited from the extraordinary catalytic behavior of Ni 3 FeN/VN heterostructure. The intrinsic metallic properties and remarkable superconductivity of anti-perovskite Ni 3 FeN can enhance the electrocatalytic performance. Density functional theory calculations confirm that the electronic coupling between Ni 3 FeN and VN facilitates the charge transfer between the two components, simultaneously generates abundant catalytic active sites at the heterogeneous interface. When the Ni 3 FeN/VN–NG was used as the air cathode, in zinc–air battery, the zinc–air battery exhibits a high-power density of 168 mW cm−2 and a long cycle life of over 200 h. [ABSTRACT FROM AUTHOR]

[Display omitted] • A self-adhesive tannin–graphene supramolecular pH-sensitive material is proposed. • The material adheres well to various solid and soft substrates. • The sensor exhibits reversible, Nernstian and selective pH responses. • The material can be printed directly to fabricate a wearable sensor for sweat pH monitoring. The pH of sweat is the most common biochemical parameter monitored by integrated wearable devices. A crucial factor in sensing materials for wearable applications is strong contact both with the skin and with the electrode substrate. Currently, the deposition of many sensitive materials on a substrate relies on mixing a small amount of binder, which raises the issue of biocompatibility and the risk of detachment. Herein, we report self-adhesive tannin–graphene supramolecular aggregates for use in wearable potentiometric pH sensors. The abundant phenolic hydroxyl groups in tannin (TA) result in strong adhesion and are also the pH response sites. The graphene (reduced graphene oxide, RGO) induces the supramolecular formation of TA and promotes electron transfer based on the π-π conjugation interaction. The pH sensor has a reversible and Nernstian response, and is not affected by potentially interfering ions. Owing to the strong adhesion of TA–RGO, a wearable pH device was directly fabricated using a dispensing printing technique. The sensor has been shown to be successful in monitoring the pH of sweat in real time. This work emphasizes the importance of the adhesion of sensing materials for use in wearable electrochemical sensors. [ABSTRACT FROM AUTHOR]

A series of N-doped graphitic carbons with different carbonization temperatures (denoted as ENGC-T) are controllably synthesized. The correlation between different N-doping species and interlayer spacing is explored, and thus demonstrating that pyrrolic-N (N-5) content has a substantial effect of the expanded interplanar spacing. The resulting ENGC-850 with the optimal N-5 configuration achieves excellent electrochemical performance in terms of capacity, rate capability, and cycling stability. [Display omitted] • A series of N-doped graphitic carbons are controllably synthesized. • High edge-N doping ratio is conducive to promote capacitive-controlled K-storage. • Pyrrolic-N configuration has a substantial effect on the interlayer spacing. • The resultant product delivers excellent rate capability and exceptional cyclability. Nitrogen (N) doped graphitic-carbon materials as anode have been intensively studied for potassium-ion batteries (PIBs). However, insufficient N-doping content, especially the low edge-N ratio composed of pyridinic-N (N-6) and pyrrolic-N (N-5) cannot provide excellent rate capability and ultra-long cycle lifespan. Meanwhile, the intercorrelation between N-doping species and enlarged interlayer spacing remains unclear and needs to be further explored. Based on this, a series of N-doped graphitic carbons with different carbonization temperatures (denoted as ENGC-T) are controllably synthesized. It is found that a high edge-N doping ratio is conducive to increase active sites to promote capacitive-controlled K-storage. And the correlation between N-doping species and interlayer spacing reveals that N-5 configuration has a substantial effect on the interlayer spacing, due to its stronger electrostatic repulsion. Accordingly, the resultant ENGC-850 with both an ultra-high edge-N ratio (76.6%) and N-5 content (42%) achieves the most abundant defects and the largest interspacing, ensuring high capacity and cycling stability. Besides, good crystallization characteristics guarantees fast electron transfer, favoring conductivity. As expected, ENGC-850 electrode delivers high capacity, excellent rate (228.9 mAh g−1 at 2 A g−1), and prolonged cycle lifespan (188.9 mAh g−1 over 2200 cycles). [ABSTRACT FROM AUTHOR]