Search

Disposable aluminum cans and plastic bottles are common wastes found in modern societies. This article shows that they can be upcycled into functional materials, such as metal-organic frameworks and hierarchical porous carbon nanomaterials for high-value applications. Through a solvothermal method, used poly(ethylene terephthalate) bottles and aluminum cans are converted into MIL-53(Al). Subsequently, the as-prepared MIL-53(Al) can be further carbonized into a nitrogen-doped (4.52 at%) hierarchical porous carbon framework. With an optical amount of urea present during the carbonization process, the carbon nanomaterial of a high specific surface area of 1324 m2 g−1 with well-defined porosity can be achieved. These features allow the nitrogen-doped hierarchical porous carbon to perform impressively as the working electrode of supercapacitors, delivering a high specific capacitance of 355 F g−1 at 0.5 A g−1 in a three-electrode cell and exhibiting a high energy density of 20.1 Wh kg−1 at a power density of 225 W kg−1, while simultaneously maintaining 88.2% capacitance retention over 10,000 cycles in two-electrode system. This work demonstrates the possibility of upcycling wastes to obtain carbon-based high-performance supercapacitors. [Display omitted] • Upcycle used PET bottles and aluminum cans into the nitrogen-doped hierarchical porous carbons. • Prepared carbon as supercapacitor electrode delivers a high energy density of 20.1 Wh/kg. • Well-defined porous carbon framework is vital to the excellent supercapacitive performance. • This work paves an effective environmental-friendly way to prepare carbon-based supercapacitor. [ABSTRACT FROM AUTHOR]

2 at.% Tm, xat.% Dy:Y 2 O 3 (x = 0, 0.1, 0.5 and 1) transparent ceramics were fabricated via vacuum sintering. The microstructural properties of the prepared ceramics were determined using XRD and SEM. The absorption cross-section of 2 at.% Tm, 1 at.% Dy:Y 2 O 3 ceramic was 0.53 × 10−20 cm2 with the FWHM of 43.59 nm. The increased cross-section originates from a large overlapping range appearing in the absorption spectrum of the Dy3+:6H 15/2 → 6F 5/2 and Tm3+:3H 6 →6H 4 transitions. The J-O intensity parameters Ω 2 , Ω 4 and Ω 6 and the fluorescence characteristics of the pivotal luminescent level of the Dy3+ ions were investigated. Under 793 nm excitation, the emission cross section of the Tm,Dy:Y 2 O 3 ceramic at 3094 nm was 3.63 × 10−21 cm2 with the FWHM of 355 nm. The fluorescence lifetimes of Dy3+:6H 13/2 level of 2 at.% Tm, xat.% Dy:Y 2 O 3 (x = 0.1, 0.5 and 1) ceramics were fitted to be 357 μs, 282 μs and 149 μs, respectively. In order to explore the quenching mechanism of Tm3+:3F 4 level, the fluorescence lifetimes of Tm3+:3F 4 of the 2 at.% Tm, xat.% Dy:Y 2 O 3 ceramics (x = 0, 0.1, 0.5 and 1) were measured to be 4.878 ms, 462 μs, 104 μs and 61 μs, respectively. The possible energy transfer mechanisms between Tm3+ and Dy3+ ions are discussed. The results show that adding Tm3+ ions to Dy:Y 2 O 3 ceramics can effectively enhance the 2.9 μm MIR through energy transfer. [ABSTRACT FROM AUTHOR]