Search

A serious challenge faced by manufacturers of large-aperture aspheric optical components of glass ceramics is the long processing time. Ultrasonic vibration–assisted grinding (UVG) allows one to effectively shorten the subsequent polishing process by several times, which is essential for grinding of aspheric components. However, the surface creation mechanism of UVG-treated glass ceramics is rarely studied. Herein, rotary ultrasonic vibration–assisted vertical grinding (RUVG) and parallel grinding (RUPG) are applied to polish the aspheric glass ceramics. Particular attention is paid to the surface formation mechanism of UVG-processed ceramics. The single-grain kinematic functions are created and the contact characteristics between the grinding wheel and aspheric surface are analyzed for the two UVG methods in terms of contact area, velocity, and trajectory. In addition, aspheric grinding texture is simulated and comparative experiments are conducted correspondingly. According to the results, the rotary ultrasonic vibration mainly influences the microscopic grinding marks. Besides, the aspheric surface form accuracy of Pt and RMS value in RUVG is 2.16 and 3.71 times lower than those in RUPG, respectively, whereas the surface roughness–related parameters (mean deviation Sa and maximum height of profile Sz) in RUVG are 6.36% and 4.56% higher than those in RUPG. This indicates that RUVG is more suitable for high precision and efficiency grinding of the aspheric surface than RUPG due to the fact that the polishing depth is primarily determined by surface form accuracy rather than surface roughness. Thus, the current research enables an in-depth understanding of surface generation mechanism in rotary ultrasonic vibration–assisted grinding, pointing out its benefits in the high-efficiency aspheric surface manufacturing. [ABSTRACT FROM AUTHOR]

In this paper, Bi2212 films were prepared on LaAlO 3 (100) and SrTiO 3 (100) substrates by the sol-gel method using Bi(NO 3) 3 ·5H 2 O, Sr(NO 3) 2 , Ca(NO 3) 2 ·4H 2 O and Cu(NO 3) 2 ·3H 2 O as raw materials. TritonX-100 (TX-100), fatty alcohol poly oxyethylene ether (AEO-9), poly (vinylpyrrolidone) (PVP) and poly (vinyl alcohol) (PVA) were used as surfactants, respectively, to improve the wettability between the sol and the substrate. When glycine and glycolic acid were used as complexing agents, these surfactants were stably miscible with the sols. The effects of different surfactant sol-gel systems on the wettability of substrates as well as the crystallinity, morphology, surface roughness and electrical transport properties of Bi2212 superconducting films were investigated. The results showed that flat and continuous c -axis epitaxial Bi2212 films were obtained using all these sol-gel systems. In particular, TX-100 and AEO-9 as surfactants showed stronger wettability of the sol-gel for both substrates. In addition, the films prepared using polymer surfactants PVP and PVA sol-gel systems showed less surface roughness. The same patterns were found in all the film samples prepared using precursor sols of different complexing agents, and all the films exhibited good electrical transport properties. This work lays a certain research foundation for the preparation of thin films by aqueous solvent sol-gel method. The method also shows great potential in terms of the stability of different sol-gel systems and the improvement of the wettability of different substrates. [ABSTRACT FROM AUTHOR]

The complexed sol-gel method has unique advantages in the preparation of multi-component functional thin films. In this paper, Bi2212 superconducting thin films were prepared by sol-gel method on SrTiO 3 (100) single crystal substrates. Glycine and glycolic acid were used as complexing agents. The thermal decomposition processes of the two sols were analyzed by contrasting thermal-thermogravimetric curves. The heat treatment processes of the different complexing agent systems were optimized to obtain films with flatter surface morphology. The phase composition of the intermediate products during the precursor heat treatment was changed by adjusting the conditions of the complexing agent and the acidity of the sol, which expanded the pure phase temperature interval of the final product. The pure phase temperature interval, morphology, surface roughness, and electrical transport properties of Bi2212 superconducting films prepared with different complexing agent sol-gel systems were investigated. When glycolic acid was used as the complexing agent, the Bi-2212 superconducting films showed the widest phase formation temperature zones of 25 K. They also had a smaller surface roughness of 10–15 nm. Other than that, all samples had good epitaxial properties, and electrical transport properties. This work provides a new idea for expanding the phase-forming temperature region of multicomponent functional ceramics. It also shows the promising potential of sol-gel method for preparing multicomponent functional films with high quality surfaces. [ABSTRACT FROM AUTHOR]

In order to achieve flexible applications of superconducting thin film materials in devices, the surface quality of the film is critical. The thickness of the film is one of the important factors affecting its surface quality. In this paper, Bi2212 superconducting thin films of different thicknesses were prepared on LaAlO 3 (100) and SrTiO 3 (100) single crystal substrates by sol-gel method and the effects of film thickness and different heterogeneous structures on their crystallographic, morphological and superconducting properties were investigated. The results showed that the roughness gradually increased with increasing Bi2212 thickness at the initial stage of film growth and stabilized after reaching a certain thickness, while the superconducting properties were destroyed at very small sample thickness, which was consistent in both single-crystal substrate films. In the Bi2212/LaAlO 3 structure, the surface quality of the sample was excellent with a roughness of 5.4 nm at a thickness of about 18 nm for Bi2212, and the growth of the precipitated phase was inhibited to a greater extent. The film also had good superconductivity. This work provided a further research basis for the preparation of high quality Bi2212 films and offers further possibilities for their practical application. [Display omitted] • Preparation of epitaxially grown multi-component functional thin films-Bi2212 superconducting films. • Effective regulation of film thickness. • Effective improvement of the surface quality of the film by regulating the thickness of the film. • Modelling the variation process of the effect of film thickness on its surface quality. [ABSTRACT FROM AUTHOR]

During the preparation of Bi 2 Sr 2 CaCu 2 O 8+ δ (Bi2212) superconducting thin films by sol-gel method, the complexing agent and sintering conditions can significantly influence the quality and the performance of thin film. In this study, Bi2212 thin films were prepared on single crystal SrTiO 3 (001) substrate, and the phase purity, crystallinity, surface morphology and transport properties were studied particularly with different sintering temperature and time, complexing agent and its ratio to metal ions. Due to relatively low carbon content, tartaric acid (TA) as a complexing agent improved the film quality and transport properties compared with the traditional ethylenediamine tetraacetic acid (EDTA). When the complex ratios of TA to metal ions was 1:1, Bi2212 thin films exhibited good epitaxial properties, a high Bi2212 phase purity and a low surface roughness of 12.74 nm. Simultaneously, under these preparation condition, Bi2212 superconducting thin film showed a higher T c, onset of 93.28 K. [ABSTRACT FROM AUTHOR]