Search

The aim of achieving integration of lightweight, high strength, high‐temperature resistant, and satisfactory electromagnetic (EM) wave absorption was successfully accomplished in the present study by synthesizing TiC–TiB2 fibers reinforced Si3N4 composites, which were pressureless sintered at 1650°C for 2 h. The preparation of TiC–TiB2 fibers was conducted through a chloride‐assisted carbothermic method. This work focused on investigating the effects of incorporating TiC–TiB2 fibers on the mechanical properties and EM wave absorption characteristics of the composites. The 30 wt% TiC–TiB2/Si3N4 composite displayed the bulk density of 1.89 g/cm3, bending strength of 93.11 ± 3.91 MPa, fracture toughness of 1.81 ± 0.10 MPa m1/2, minimum reflection loss of −38.87 dB, and effective absorption bandwidth of 1.43 GHz in the Ku‐band, respectively. The as‐synthesized TiC–TiB2/Si3N4 composites are promising candidates for EM wave absorbing load‐bearing materials due to their outstanding mechanical properties and microwave absorption properties. [ABSTRACT FROM AUTHOR]

In view of the lack of conformal, load‐bearing, light‐weight, and high temperature‐resistant integrated wave‐absorbing composites suitable for extremely complex conditions, the gel‐casting process was successfully applied to porous Si3N4 wave‐absorbing composites in this work. A universal low‐slurry for gel casting was prepared by using two dispersants acting together (tetramethylammonium hydroxide solution and sodium lauryl sulfate), which ensured the smooth completion of the gel casting process. Combining the thermogravimetric and differential thermal gravity curves of the composite green body, reasonable parameters of the rubber discharge process are given to avoid the problem of the green body swelling and cracking. The porous TiC/Si3N4 composites were successfully prepared by holding them at 1650°C for 3 h. The bending strength, density, minimum reflection loss, absorption bandwidth, and matched thickness in the P‐band of the composites with 30 wt.% TiC addition were 54.08 ± 3.02 MPa, 1.906 g/cm3, ‐37.75 dB, 1.9 GHz, and 4.1 mm, respectively. The electromagnetic wave loss mechanisms of the composites are a combination of conductivity loss, multiple reflections and scattering, interfacial polarization, and defect polarization. [ABSTRACT FROM AUTHOR]

In this study, a novel bionic periosteum (BP)-bioactive glass fiber membrane (BGFM) is designed. The introduction of magnesium ion (Mg 2+ ) and zinc ion (Zn 2+ ) change the phase separation during the electrospinning (ES) jet stretching process. The fiber's pore structure transitions from connected to closed pores, resulting in a decrease in the rapid release of metal ions while also improving degradation via reducing filling quality. Additionally, the introduction of magnesium (Mg) and zinc (Zn) lead to the formation of negative charged tetrahedral units (MgO 4 2- and ZnO 4 2- ) in the glass network. These units effectively trap positive charged metal ions, further inhibiting ion release. In vitro experiments reveal that the deigned bionic periosteum regulates the polarization of macrophages toward M2 type, thereby establishing a conducive immune environment for osteogenic differentiation. Bioinformatics analysis indicate that BP enhanced bone repair via the JAK-STAT signaling pathway. The slow release of metal ions from the bionic periosteum can directly enhance osteogenic differentiation and vascularization, thereby accelerating bone regeneration. Finally, the bionic periosteum exhibits remarkable capabilities in angiogenesis and osteogenesis, demonstrating its potential for bone repair in a rat calvarial defect model., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)