Search

For enhancing the physical properties of water-based acrylic resin coating, a green modified water-based nano-alumina dispersion was successfully prepared by regulating mass fraction of anti-sedimentation dispersant under the condition of ultrasonication. Subsequently, the water-based nano alumina dispersion was characterized, and the physical properties of commercial water-based acrylic resin composite coating mixed with the dispersion were tested. Results showed that under the conditions of a dispersant mass fraction of 0.50% and an ultrasonic dispersion time of 0.5 h, the storage stability time of the prepared water-based nano-alumina dispersion was greater than 90 d. Besides, after adding 4%(mass fraction) water-based nano-alumina dispersion to commercially available water-based acrylic resin coatings, the wear-resistant rotation number of the as-obtained coating increased from less than 5 r to more than 15 r, and the scratch resistance load increased from 1.10 kg to 2.00 kg.

As graphene-related technology advances, the benefits of graphene metamaterials become more apparent. In this study, a surface-isolated exciton-based absorber is built by running relevant simulations on graphene, which can achieve more than 98% perfect absorption at multiple frequencies in the MWIR (MediumWavelength Infra-Red (MWIR) band as compared to the typical absorber. The absorber consists of three layers: the bottom layer is gold, the middle layer is dielectric, and the top layer is patterned with graphene. Tunability was achieved by electrically altering graphene's Fermi energy, hence the position of the absorption peak. The influence of graphene's relaxation time on the sensor is discussed. Due to the symmetry of its structure, different angles of light source incidence have little effect on the absorption rate, leading to polarization insensitivity, especially for TE waves, and this absorber has polarization insensitivity at ultra-wide-angle degrees. The sensor is characterized by its tunability, polarisation insensitivity, and high sensitivity, with a sensitivity of up to 21.60 THz/refractive index unit (RIU). This paper demonstrates the feasibility of the multi-frequency sensor and provides a theoretical basis for the realization of the multi-frequency sensor. This makes it possible to apply it to high-sensitivity sensors. [ABSTRACT FROM AUTHOR]

A novel noncovalent surface modification of commercial single-walled carbon nanotubes (SWCNTs) was successfully carried out by using ball grinding technology between SWCNTs and mixed dispersants (polyvinylpyrrolidone (PVP) and alkanolamine), affording a highly homogeneous and stable PA-SWCNTs dispersion in water. The homogeneous dispersibility and long storage stability were systematically investigated by transmittance spectroscopy, absorption spectroscopy, zeta potential analyzer, sedimentation photo and transmittance electron microscopy. Under the optimized conditions, the PA-SWCNTs dispersion modified with 0.7 wt% PVP and 0.25 wt% alkanolamine under the condition of total 6 h ball grinding time using paint shaker can be easily well-dispersed in water and has good storage stability, and no sedimentation is observed more than one month. From an industrial perspective, this method is green and easy to operate in industry., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)