Search

This study aimed to explore the co-removal effect and mechanism of Cr(VI) and Cd(II) with an optimized synthetic material. The toxicity and accumulation characteristics of Cr(VI) and Cd(II) encountered in wastewater treatment areas present significant challenges. In this work, a rational assembly of sulfide-modified nanoscale zero-valent iron (SnZVI) was introduced into a biochar (BC), and a Cr(VI)–Cd(II) binary system adsorbent with high efficiency was synthesized. When the preparation temperature of the BC was 600 °C, the molar ratio of S/Fe was 0.3, the mass ratio of BC/SnZVI was 1, and the best adsorption capacities of BC-SnZVI for Cr(VI) and Cd(II) in the binary system were 58.87 mg/g and 32.55 mg/g, respectively. In addition, the adsorption mechanism of BC-SnZVI on the Cr(VI)-Cd(II) binary system was revealed in depth by co-removal experiments, indicating that the coexistence of Cd(II) could promote the removal of Cr(VI) by 9.20%, while the coexistence of Cr(VI) could inhibit the removal of Cd(II) by 43.47%. This work provides a new pathway for the adsorption of Cr(VI) and Cd(II) in binary systems, suggesting that BC-SnZVI shows great potential for the co-removal of Cr(VI) and Cd(II) in wastewater. [ABSTRACT FROM AUTHOR]

Removal of radioactive technetium‐99 (99TcO4−) from water by effective adsorbents is highly desired but remains a challenge. The currently used resin adsorbents possess several obstacles, such as slow adsorption kinetics and low adsorption capacity. To address these issues, herein a type of fibrous adsorbent with porosity and hyper‐branched quaternary ammonium groups, namely porous cationic electrospun fibers (PCE fibers), is successfully prepared. PCE fibers can remove 97% of 99TcO4− within 1 min and the equilibrium time of 99% removal is 20 min. The predicted maximum adsorption capacity toward the surrogate ReO4− can reach 826 mg g−1, which is higher than the state of art anion‐exchange resins and most of the other reported adsorbents. Furthermore, PCE fibers have good selectivity for ReO4− in the presence of competitive anions, and can retain ReO4− uptake under extreme conditions including high acid–base and gamma irradiation. Importantly, PCE fibrous adsorptive membrane is employed for dynamic ReO4− removal from simulated Hanford LAW stream with a processing capacity of 600 kg simulated stream per kilogram PCE fibers. The excellent performance highlights the advantages of PCE fibers over traditional resins in technetium removal. [ABSTRACT FROM AUTHOR]

[Display omitted] • A novel magnetic NaCe(CO 3) 2 /Fe 3 O 4 (NCF) nanocomposite was synthesized easily. • NCF shows excellent adsorption performance (qm = 86.69 mg P g−1) for phosphate. • NCF shows exceptional selectivity for phosphate. • Effective and rapid uptake in low concentrations of phosphate. Phosphorus (P) contamination has become a worldwide issue due to its adverse impacts on water security and human health. Additional research is required because the selectivity and adsorption capacity of P adsorbents continue to impede their practical application. Herein, a novel NaCe(CO 3) 2 /Fe 3 O 4 nanocomposite (NCF) with good magnetic properties were synthesized through a modified hydrothermal method for P removal from water. With an adsorption capacity of 86.69 mg P g−1, the NCF demonstrates outstanding phosphate uptake efficiency. At low P concentrations, the removal rate exceeded 90.0%, and the residual P concentration was below 0.1 mg P L−1. Notably, NCF demonstrated exceptional P selectivity in actual water containing multiple substances, with negligible interference from competing ions and humic acid (HA). The adsorption processes of NCF were well described by the pseudo-second-order kinetic model (PSO) and Langmuir isotherm model, corresponding to its kinetics and thermodynamics, respectively. The exhausted NCF can be regenerated and retain an effective phosphorus removal capability even after regeneration. Characterization results demonstrated that electrostatic attraction and ligand exchange were responsible for P adsorption, forming stable CePO 4 crystals with low solubility. Moreover, the NCF demonstrated some efficacy in removing typical organic and inorganic phosphorus. [ABSTRACT FROM AUTHOR]

[Display omitted] • La 2 (CO 3) 3 /CoFe 2 O 4 /biochar (LCB) was synthesized by a hydrothermal process. • LCB/PMS system was established to remove P(III) in one step. • LCB/PMS exhibited satisfactory removal rate of P(III) in a wide pH range. • SO 4 •- played a critical role in the oxidation process. • Different types of phosphorus could be rapidly removed by LCB/PMS. Phosphite [P(III)], an emerging eutrophication pollutant, has attracted limited attention in recent years. Owing to the higher solubility and resistance to biotransformation of P(III), oxidation of P(III) to phosphate [P(V)] is considered to be necessary to enhance P(III) removal. Herein, an efficient and regenerable magnetic La 2 (CO 3) 3 /CoFe 2 O 4 /biochar composite (LCB) was constructed through a facile one-pot hydrothermal method to treat phosphite-laden wastewater. LCB coupled with peroxymonosulfate (PMS) exhibited satisfactory P(III) removal performance through a one-step process for simultaneous oxidation and adsorption of P(III). The adsorption capacity of LCB/PMS for P(III) (71.94 mg/g) was much higher than that of LCB. LCB/PMS system showed high P(III) removal efficiency of 96.62 %, wide pH ranging from 4.0 to 9.0, and good reusability. It also worked well in the existence of anions and humic acid. The quenching experiments and electron spin resonance tests (ESR) revealed the critical role of SO 4 •- in the P(III) oxidation process. Characterization results demonstrated that electrostatic attraction and ligand exchange were responsible for P(III)/P(V) adsorption. Moreover, LCB/PMS system presented desirable performance in eliminating a series of typical organic and inorganic phosphorus. The LCB/PMS system provides a promising and sustainable technology for the purification of P(III)-contaminated water. [ABSTRACT FROM AUTHOR]

[Display omitted] • Calcite-biochar was prepared through a facile pyrolysis process from biomass waste. • CAB displayed excellent removal capacities for Cu(II) and CIP. • The adsorption-flocculation were involved in the removal of CIP. • Concentrations of Cu(II) had different effects on CIP removal. • The co-removal of Cu(II) and CIP included various interactions. The discharge of metals and antibiotics pose a serious risk to public health and environment. Gaining insight into the removal process is an imperative implication for comprehending environmental transformation of contaminants. In this study, a low-cost calcite-biochar (CAB) composite was prepared through a facial pyrolyzed process from shell waste for the removal of Cu(II) and ciprofloxacin (CIP) in single and mixed systems. CAB exhibited superior removal performance toward these two pollutants. In single system, CIP removal was adsorption coupled with flocculation and Cu(II) removal was adsorption combined with precipitation. The CIP removal followed the PSO kinetic and Freundlich isotherm model, while Cu(II) removal were better described by PSO kinetic and Langmuir isotherm model. In binary system, Cu(II) had an promotional and inhibitory effect on the removal of CIP, which depended on the concentration of Cu(II). But the adsorption capacity of Cu(II) removal was reduced with the existence of CIP. The microstructure analysis indicated that the cation bridging, hydrogen bonding, surface complexation and π-π interaction were attributed to the CIP removal and Cu(II) could act as a bridge or competitor. While the Cu(II) removal was inhibited by competing with the active sites or suppressing the formation of posnjakite in the coexistence of CIP. These results provided valuable information for the co-removal of CIP and heavy metal. [ABSTRACT FROM AUTHOR]

The multi-responsive ternary poly(N-isopropyl acrylamide) (PNIPAM)/ /sodium alginate (SA)/graphene oxide (GO) composite hydrogels were prepared. The influence of GO content on the microstructure and physical properties of the composite hydrogel was researched. The ternary composite hydrogels exhibited significantly larger mechanical strength and higher water uptake compared to binary PNIPAM/SA composite hydrogels. The effects of temperature, pH, and contact time on the adsorption capacity of rhodamine B (RB) for the PNIPAM/SA/GO ternary composite hydrogels were further investigated. The adsorption kinetic and isotherm for the adsorption behavior of the ternary composite hydrogel were well fitted with the pseudo-second-order kinetic model and Langmuir model, respectively. Besides, the PNIPAM/SA/GO ternary composite hydrogel could be easily removed from the dye solutions and reused without the obvious decrease of its performance. It indicated that the ternary composite hydrogel could serve as an effective adsorbent for the removal of organic pollutants. [ABSTRACT FROM AUTHOR]

Combining adsorption with other technologies holds great potential in fast and deep arsenic ion removal. Herein, chitosan‑zirconium composite adsorptive membranes (CS-Zr CM) were successfully prepared using simple casting and sodium hydroxide coagulation strategies, which was demonstrated the use in arsenic ion-capture electrodialysis based on their good adsorption performance. In the batch adsorption tests, the maximum adsorption capacities of CS-Zr CM for As(III) and As(V) were 134.2 mg/g and 119.5 mg/g, respectively. CS-Zr CM also exhibited satisfying adsorption selectivity and good reusability toward As(III) and As(V). However, the adsorption kinetics showed that they needed 48 h to reach the adsorption equilibrium and the adsorption ability toward trace arsenic ion was ineffective. Furthermore, CS-Zr CM was applied as the adsorptive membrane in the electrodialysis process. Under the influence of electric field, the As(III) and As(V) removal equilibrium time was shortened to 12 h and the concentrations of As(III) and As(V) ions could be efficiently reduced to below the WHO limit in drinking water (10 μg/L), which far surpassed the physicochemical adsorption method. Such good arsenic ion removal ability of CS-Zr CM together with the ease scalable fabrication, low cost, and biodegradable properties shows its huge prospects in arsenic-containing wastewater treatment. Biodegradable chitosan‑zirconium composite adsorptive membrane was used in the arsenic ion-capture electrodialysis configuration which exhibited fast and deep arsenic ion (As(III) and As(V)) removal. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • Hyperbranched phosphate groups were grafted onto electrospun nanofibers. • The proton transfer process could lead to the zwitterionic structures. • The fiber adsorbents exhibited excellent adsorption performance towards UO 2 2+. • The nanofibers also showed anti-bacterial adhesion and anti-protein adhesion. • The fiber adsorbents had good potential for the uranium extraction from seawater.. The development of efficient adsorbents with anti-biofouling properties for uranium extraction from seawater is highly attractive to meet the growing demands for energy. However, traditional fiber adsorbents still suffer from the challenge of weak binding energy, low functional group density, and inefficient antifouling ability. Herein, inspired by the structures of phospholipid, the bio-inspired zwitterionic phosphate groups were created onto the electrospun nanofibers to manipulate the affinity with uranium and the anti-biofouling property. Additionally, hyperbranched grafting reaction together with thin diameters of the fibers were applied to significantly improve the available density of functional groups. The constructed hyperbranched zwitterionic phosphate groups functionalized nanofiber adsorbents (ZP-PAN fibers) exhibited high distribution coefficient k d (7.38 × 106 mL/g) and large adsorption capacity (1294.0 mg g−1) in the uranium-spiked seawater, surpassing most of reported polymeric adsorbents. ZP-PAN fibers also showed good selectivity against competitive cations and stable reusability. Owing to their zwitterionic structures, ZP-PAN fibers had satisfactory anti-adhesive ability toward bacteria and protein. Consequently, the uranium could be effectively extracted by ZP-PAN fibers from natural seawater with the extraction capacity of 8.1 mg g−1 after contacting with seawater for 15 days. This work demonstrates a new functionalization selection for nanofiber materials and provides a promising adsorbent in the practical uranium extraction from seawater. [ABSTRACT FROM AUTHOR]

[Display omitted] • Novel cationic electrospun nanofibers (NCE fibers) were designed and synthesized. • Specific anion traps with hydrophobic microenvironment were constructed. • NCE fibers exhibited fast kinetics and high uptake for ReO 4 −. • NCE fibers showed good removal depth and satisfying selectivity toward ReO 4 −. • The column adsorption was also conducted with the treatment capacity of 1540 BV. Developing cationic adsorbents for efficient radioactive pertechnetate (99TcO 4 −) removal from water is of great significance in both nuclear fuel management and nuclear-related environmental treatment fields. However, tremendous efforts should be taken to improve the comprehensive performance of the adsorbent materials. Herein, novel cationic electrospun nanofibers were synthesized via the blending electrospinning from the branched polyethylenimine based solution and the following quaternization reaction by benzyl bromide. Consequently, abundant specific anion traps with hydrophobic microenvironment were constructed on the fibers. The obtained fiber adsorbents were systematically investigated to remove perrhenate (ReO 4 −) ions (the nonradioactive surrogate for TcO 4 −), which exhibit satisfying adsorption performance in several aspects: high adsorption capacity (943 mg g−1), fast kinetics (30 min), good removal depth (distribution coefficient = 1.1 × 106 mL g−1), large dynamic column adsorption volume (1540 bed volume), and excellent ReO 4 − capture from solution with high ionic strength or acidity/alkalinity. The adsorption performance surpassed all macroscopic shapeable adsorbents and many powdery advanced porous materials, owing to their abundant adsorption sites, tailored anion traps and macroscopic fibrous structures. Overall, this work gives a useful insight into designing novel adsorbents for effective TcO 4 −/ReO 4 − capture. [ABSTRACT FROM AUTHOR]

• Well-defined molecularly imprinted nanospheres were synthesized in one-step. • MIPs show fast recognition kinetics, high selectivity and capacity towards β-blocker atenolol. • Hydrogen-bonding is proven to play a vital role in the specific recognition. • Class-selective separation of five β-blockers in human serum was realized. β-blockers are a class of medications that are used to treat abnormal heart rhythms and hypertension. Molecularly imprinted polymers (MIPs) capable of selective recognizing and extracting β-blockers from complex biological samples hold great promise in bioanalytical and biomedical applications, but developing such artificial receptor materials is still challenging. Herein, we introduce a simple one-step method for the synthesis of well-defined molecularly imprinted nanospheres in high yield (83.6–94.4%) via reversible addition-fragmentation chain transfer (RAFT) precipitation polymerization for the selective recognition and extraction of the β-blockers from human serum. The prepared MIPs are characterized in terms of morphology, pore properties, binding kinetics, capacity, selectivity, and recognition mechanisms. The uniform nanoscale-imprinted layer favored the rapid mass transfer of β-blockers. The binding studies showed the high adsorption capacity (126.8 μmol/g) and selectivity of the developed nanomaterial. The investigation on the recognition mechanism reveals that multiple driving forces participate in the binding between MIP and β-blockers, where hydrogen bonding plays as the dominating role for the specific recognition. The MIP was successfully applied for the direct enrichment of five β-blockers from human serum with HPLC recoveries ranging from 82.9 to 100.3% and RSD of 0.5–6.9% (n = 3). [ABSTRACT FROM AUTHOR]

[Display omitted] • A new magnetic composite of FSNCS/SDBS was synthesized at low temperature. • FSNCS/SDBS shows excellent adsorption performance for CIP. • FSNCS/SDBS shows wide pH adaptability. • SDBS enhances CIP's adsorption by improving the surface charge of FSNCS. In this study, a novel magnetic nickel cobalt sulfide/sodium dodecyl benzene sulfonate (FSNCS/SDBS) adsorbent was synthesized successfully by a facile protocol and was developed to remove ciprofloxacin (CIP) for water purification. The FSNCS/SDBS adsorbent is featured with excellent CIP adsorption capacity of 625 mg·g−1 (much higher than reported most adsorbents), wide pH adaptability (little changed CIP adsorption capacity in pH 6–11), and good magnetic property. The effects of pH and ionic strength on CIP adsorption were investigated. The calculative thermodynamic parameters indicated that CIP adsorption by FSNCS/SDBS was spontaneous and exothermic. CIP adsorption followed pseudo-second-order kinetics and an isotherm best fit with the Langmuir adsorption mode. The adsorption mechanism of CIP onto FSNCS/SDBS was proposed and demonstrated, which included the electrostatic interaction, π–π interaction, coordination with metal and hydrogen bonding. [ABSTRACT FROM AUTHOR]