Search

Featured Application: This paper proposes virtual admittance feedforward compensation and phase correction for average-current-mode-controlled totem-pole PFC converters. It can effectively reduce total harmonic distortion (THD) and improve the power factor (PF) of the converter. The proposed control strategy can be directly used in on-board chargers (OBCs) for electric vehicles, power supplies for server clusters, communication equipment, industrial equipment, etc. This paper explores a current distortion problem in totem-pole bridgeless power factor correction (PFC) converters with average current mode (ACM) control. With in-depth modeling for the current and voltage loops, it was found that the current distortion is caused by the limited current loop bandwidth and input filter capacitor. These factors lead to the presence of a susceptance component in the input admittance, which degrades the power factor (PF) and total harmonic distortion (THD) of the PFC converter. To solve this problem, this paper proposes virtual admittance feedforward compensation (VAFC) and phase correction methods to adjust the input admittance to pure conductance. The VAFC can generate virtual admittance that compensates for susceptance components in the input admittance, while phase correction can generate an equivalent current source that offsets the current in input capacitors. Furthermore, a phase lock loop (PLL) is introduced to realize the VAFC, which reduces the feedforward interference caused by input voltage sampling noise. Finally, an experimental prototype was built to verify the effectiveness of the proposed strategies. According to the test results, the proposed compensation strategy improves the PF by 1.23%, while reducing the THD by 2.52% and achieving a peak efficiency of 98.69%. [ABSTRACT FROM AUTHOR]

Two RF CMOS voltage-controlled oscillators (VCOs) with source damping resistors to suppress 1/ ${f}$ noise up-conversion are presented in this letter. Two important parameters: the phase deviation from the first harmonic term of the ideal impulse sensitivity function (ISF), and the initial phase of the first harmonic term of channel current, dominate the 1/ ${f}$ noise up-conversion. Based on the outcome, the effects of the source damping resistors on the two phases are analyzed and two VCO prototypes are designed. Implemented in Taiwan Semiconductor Manufacturing Company 180 nm RF CMOS process, the VCOs achieve 64.7% and 50% frequency tuning range at 2.3–4.5 and 3–5 GHz, respectively, and perform phase noise (PN) of −131.03, −129.28, and −124.98 dBc/Hz at 1 MHz offset from output frequencies of 2.33, 3.057, and 4.57 GHz separately. [ABSTRACT FROM AUTHOR]

This paper presents a fractional- N all-digital phase-locked loop (ADPLL). A 4-bit multi-delay line time-to-digital converter (MDL-TDC) using path selection technique is proposed to achieve a 4-ps resolution with 0.24-mW power consumption at 52 MS/s. A TDC offset calibration method is used to eliminate TDC metastability. An isolated constant-slope digital-to-time converter (ICS-DTC) is utilized to cancel the quantization noise (Q-noise) and achieve true-fractional delay. By tuning DTC compensation, spur and Q-noise are suppressed by 14 dB. To speed up the locking process of the ADPLL, a counter-based coarse PLL is integrated to monitor and compensate for large frequency and phase jump while consuming almost zero power. The proposed ADPLL is implemented in a 40-nm standard CMOS process, occupying a silicon area of 0.36 mm2. When TDC offset calibration is turned on, the in-band noise is suppressed by 20 dB. The measured results show 0.78-ps rms jitter and −40-dBc in-band fractional spur are achieved, corresponding to a figure of merit (FOM) of −235 dB. [ABSTRACT FROM AUTHOR]