Search

The increasing needs for new types of computing lie in the requirements in harsh environments. In this study, the successful development of a non‐electrical neural network is presented that functions based on mechanical computing. By overcoming the challenges of low mechanical signal transmission efficiency and intricate layout design methodologies, a mechanical neural network based on bistable kirigami‐based mechanical metamaterials have designed. In preliminary tests, the system exhibits high reliability in recognizing handwritten digits and proves operable in low‐temperature environments. This work paves the way for a new, alternative computing system with broad applications in areas where electricity is not accessible. By integrating with the traditional electronic computers, the present system lays the foundation for a more diversified form of computing. [ABSTRACT FROM AUTHOR]

Improving the resilience of 3D-printed composites through material extrusion technology (MEX) is an ongoing challenge in order to meet the rigorous requirements of critical applications. The primary objective of this research was to enhance the impact resistance of 3D-printed composites by incorporating continuous hybrid fibers. Herein, continuous virgin carbon (1k) and Kevlar (130D and 200D) fibers were used with different weight and volume fractions as reinforcing fibers to produce hybrid and non-hybrid composites for impact resistance testing to obtain energy absorption with different impact energies: 20 J, 30 J, 40 J, and 50 J. Moreover, 0°/90° fiber orientations were used. Hybrid composites with combinations of PLA + CF + 130D KF and PLA + CF + 200D KF showed higher impact resistance, less damaged areas (71.45% to 90.486%), and higher energy absorption (5.52–11.64% more) behaviors compared to PLA + CF non-hybrids. CT scan images provided strong evidence to resist the fracture and breakage patterns, because the stiffness and elongation properties of the fibers acted together in the hybrids specimens. Furthermore, positive hybrid effects of the PLA + CF + KF hybrids also showed an ideal match of toughness and flexibility in order to resist the impacts. In the future, these hybrids will have the potential to replace the single type of composites in the fields of aerospace and automobiles. [ABSTRACT FROM AUTHOR]

3D printing of continuous fiber‐reinforced thermoplastic composites (CFRPCs) has expanded potential structural application in recent years. However, it is still challenging to tailor the mechanical and energy absorption properties of 3D‐printed composites to fulfill the requirements for critical application conditions. Herein, hybrid fiber (HF) reinforced composites have been prepared by 3D printing of CFRPCs and investigated on the mechanical and energy absorption behaviors. Continuous virgin carbon fibers (CF), Kevlar fibers (KF) (130 Deniers (D), and 200 Deniers (D)) and E‐glass fibers (GF) were used as reinforcing fibers to produce hybrid and non‐hybrids composites. Hybrid composites with different combination of CF + GF, CF + 130D KF, and CF + 200D KF showed tailorable behaviors, such as flexural modulus (16,691.74, 20,372.38, and 19,017.44 MPa), tensile modulus (15,022.6, 16,269.41, and 15,320.58 MPa). And energy absorption behaviors of CF + 130D KF and CF + 200D KF were tailored in both tensile (18,865.25 and 20,302.07 N‐mm, respectively) and bending (3594.54 and 3570.80 N‐mm, respectively) tests compared to other composites which will be ideal for energy absorption applications. Moreover, CF + GF showed tailored strength which could be used in the need of high stiffness. SEM images were providing strong evidence to resist the fracture and breakage patterns, by tailoring the stiffness and elongation properties of fibers in hybrids specimens. Furthermore, positive hybrid effects of CF + KF hybrids in tensile and bending tests were also showing an ideal match of toughness and flexibility. In future, these cost and weight effective hybrids will have potential to apply in aerospace and automobile. [ABSTRACT FROM AUTHOR]

The necessity for more efficient manufacturing approaches of high-performance complex fiber reinforced composites parts is increasing. This study develops a framework to design and produce topologically optimized continuous carbon fiber reinforced composites (CCFRCs) with both high manufacturing efficiency and manufacturability, and experimentally validates via material extrusion (MEX) 3D printing technique in a more than 1-m wing spar for the unmanned aerial vehicle (UAV). The load-carrying structure can be topologically optimized by a solid orthotropic material with penalization method and further designed into a continuous fiber trajectory under the consideration of optimal material density, optimal fiber orientation and 3D printing process limitation. Based on this method, the complex topological CCFRCs can be realized by a single-stroke printing path with intact fiber. The feasibility and effectiveness of the proposed framework have been evaluated on the Messerschmitt-Bölkow-Blohm (MBB) beam which reveals obvious higher performance in specific stiffness and peak load compared with commonly used honeycomb structure. As a case study, a topologically optimized UAV wing spar was designed and validated experimentally. Mechanical testing shows that the designed wing spar can survive in operating loads. Furthermore, a proof-of-concept internal wing structure was presented where conventional wing spar and ribs are replaced by CCFRCs 3D printed structures. It exhibits high load-carrying characteristics, is lightweight and simple to fabricate. [ABSTRACT FROM AUTHOR]

Continuous hybrid fiber‐reinforced composites (CHFRCs) have excellent mechanical properties, and strong designability, and are widely used in aerospace and other fields. The development of 3D printing technology offers novel directions in the design and manufacture of complicated CHFRC components in aerospace. For this purpose, this study focused on the design and characterization of hybrid continuous fiber‐reinforced composites prepared by 3D printing. The rapid mold‐free integrated manufacturing of hybrid continuous Kevlar/carbon fiber‐reinforced composites was realized by coaxial hybrid 3D printing technology. The regulation and mechanism of tensile properties of 3D‐printed CHFRCs were elucidated. The tensile strengths of 3D‐printed CHFRCs were enhanced by up to 15.3% and 92.4%, respectively, compared to single continuous carbon and Kevlar fiber composites produced by the same process parameter. A new tensile modulus predicting method for 3D‐printed CHFRCs was proposed. It mitigated the influence of complex interfacial characteristics on mechanical property prediction and achieved precise estimation of the tensile modulus of 3D‐printed CHFRCs. This will provide the theoretical support for the application and development of 3D‐printed CHFRCs. Highlights: Mouldless rapid manufacturing of coaxial hybrid fiber composites achieved.The tensile strength and modulus of the fiber composites are greatly improved.A new prediction method for the tensile modulus of 3D‐printed composites is proposed. [ABSTRACT FROM AUTHOR]

In this paper, a multidisciplinary framework to design and produce a topological structure with inhomogeneous distributions of fiber orientation and content for 3D printed continuous fiber reinforced polymer composites (CFRPCs) was proposed to maximize load and fiber utilization efficiency. The combination of optimization design and 3D printing for composites with curvilinear fiber was achieved that the fiber orientation and content were progressively designed in the two-stage procedure. The fiber orientation and topological structure were concurrently optimized firstly. Then, the fiber content was designed through finite element analysis (FEA) and realized by changing continuous fiber path with a hierarchical structure design method. Based on this, the topological beam has been additively manufactured and experimentally investigated, showing 38.55% and 25.40% in stiffness and peak load enhancement compared with the original CFRPCs design, while 264.39% and 165.84% increments compared with pure polymer design. The proposed approach has widened design freedom of CFRPCs 3D printing, possessing potential application to solve engineering problem in aerospace, automotive and other fields. [ABSTRACT FROM AUTHOR]

[Display omitted] • Modeling and 3D printing of variable stiffness composites with curved fibers. • Limitations of 3D printing are taken into account in the modeling. • 3D printing of the variable stiffness composites without gaps and overlaps. • 3D printing by the control of positioning a nozzle and the adaptive feed of plastic. • Comparison of numerical and experimental strain fields of the VSCs via FEM and DIC. In this paper, biomimetic continuous fiber reinforced composite structures were modeled and printed on the basis of variable distributions of fiber orientation and the fiber volume fraction, which are similar to the wood structure in the vicinity of a knot. The variable distributions of curved fibers in the variable stiffness composites (VSCs) without gaps and overlaps were realized during the 3D printing process by the control of positioning a nozzle and the adaptive feed of plastic. To demonstrate efficiency of the modeling method and the 3D printing process, a VSC plate with a hole under tensile loading was designed, printed and tested. The results of tensile tests showed that the main failure of the composite plates occurs far from the hole. Furthermore, numerical and experimental strain fields obtained by the finite element method and digital image correlation, respectively, are similar. The efficiency in fiber savings for the composite plates was improved by the change in reinforcement from unidirectional fibers to curved fibers adapted to heterogeneous stress fields. [ABSTRACT FROM AUTHOR]

3D printing of continuous fiber reinforced thermoplastic composites (CFRTPCs) enables the fabrication of multiscale structures, whose features can simultaneously span the microscale fiber trajectory and macroscale topological structure. In this study, a multiscale design and manufacturing strategy integrating concurrent optimization of micro fiber orientation and macro structural topology was developed for CFRTPCs and realized by ingenious path planning for 3D printing process. Typical structures, such as Messerschmitt-Bölkow-Blohm (MBB) beam and cantilever beam, were verified experimentally in comparison with the monoscale structures. Structural stiffness and peak load could be improved by 36.27% and 64.43% respectively for MBB beam, 123.07% and 52.16% respectively for cantilever beam, showing the significant influence on concurrent material and structure design for CFRTPCs. Multiscale concurrent design and 3D printing could promote the potential of CFRTPCs, and even challenge traditional design and manufacturing mechanism relating material and structure scale. [ABSTRACT FROM AUTHOR]

To fully exploit the preponderance of three-dimensional (3D)-printed, continuous, fiber-reinforced, thermoplastic composites (CFRTPCs) and self-reinforced composites (which exhibit excellent interfacial affinity and are fully recyclable), an approach in which continuous fiber self-reinforced composites (CFSRCs) can be fabricated by 3D printing is proposed. The influence of 3D-printing temperature on the mechanical performance of 3D-printed CFSRCs based on homogeneous, continuous, ultra-high-molecular-weight polyethylene (UHMWPE) fibers and high-density polyethylene (HDPE) filament, utilized as a reinforcing phase and matrix, respectively, was studied. Experimental results showed a qualitative relationship between the printing temperature and the mechanical properties. The ultimate tensile strength, as well as Young's modulus, were 300.2 MPa and 8.2 GPa, respectively. Furthermore, transcrystallization that occurred in the process of 3D printing resulted in an interface between fibers and the matrix. Finally, the recyclability of 3D-printed CFSRCs has also been demonstrated in this research for potential applications of green composites. [ABSTRACT FROM AUTHOR]

Fibre-reinforced composite thin-walled structures are often subjected to complex working conditions with multiple loads. By combining various fibres, continuous hybrid fibre-reinforced composites (CHFRCs) can achieve good comprehensive performances and positive hybrid effects, which will improve the ability of composite structures to withstand complicated loads. Coaxial CHFRCs were prepared quickly without the use of a mould by 3D printing. The influence of the hatch spacing on hybrid effect, dynamic and static bending properties and failure mode were investigated by the research of fibre content, hybrid ratio, and interface. The results showed that the 3D-printed coaxial CHFRCs had a positive hybrid effect for the impact strength. A high positive hybrid effect could be attained by modifying the process parameters. At the same time, the composite's comprehensive performances were enhanced. The impact strength of 3D-printed coaxial CHFRCs was 1.94 times greater than that of the continuous carbon-fibre-reinforced composites, and its flexural strength was 1.75 times greater than that of the continuous Kevlar-fibre-reinforced composites at same process parameter. With their high comprehensive performances and high positive hybrid effect, 3D-printed coaxial CHFRCs have a lot of potential use in thin-walled structures in areas such aerospace. • Coaxial continuous hybrid fibre-reinforced composites (CHFRCs) were prepared quickly without a mould by 3D printing. • The effect of the hatch spacing on hybrid effect, dynamic and static bending properties and failure mode were investigated. • The 3D-printed CHFRCs had an impact strength 1.94 times than CCFRCs and a flexural strength 1.75 times than CKFRCs. • The 3D-printed CHFRCs performed high comprehensive performance and had a positive hybrid effect on the impact strength. [ABSTRACT FROM AUTHOR]

Multifunctional heat flux manipulation plays an essential role on the industrial processes. A well-designed spatial distribution of thermal conductivity enables a variety of thermal functions, including thermal cloaks and rotators. Despite the promising potential of metamaterials in achieving multifunctional heat transfer in complex nonconformal geometries, significant challenges remain due to limitations in design methods. In this work, a novel approach based on conformal discretization was proposed to address these major challenges, in which the thermal conductivity tensors of discrete functional cells were diagonalized with the local thermal conductivity tensors as inputs. To verify the effectiveness of the conformal discretization, a nonconformal thermal rotating cloak was designed and manufactured. Both simulations and experiments confirmed the effectiveness of this approach in obtaining multifunctional thermal metamaterial with remarkable thermal cloaking and rotating capabilities. Moreover, the nonconformal thermal rotating cloak still maintained thermal functionality well under the condition of omnidirectional heat flow. This work provides a feasible approach to realize multifunctional thermal manipulation in arbitrarily transformed regions, and thus shows significant application potential in the fields of aerospace engineering and civil engineering. [ABSTRACT FROM AUTHOR]