Search

For vacuum circuit breakers, the anode will change to active mode when the current is high enough. The vapor produced by the anode will become another important source of plasma. In this paper, a three-dimensional (3D) magnetohydrodynamic model considering anode vapor and multiple components is developed to study the vacuum circuit breakers with cup-shaped CuCr contact. The characteristics of arc under the actual magnetic field with different anode temperature distribution and different cathode utilization are simulated. Moreover, the ionization and recombination processes between different kinds of components are considered. The simulation results show that the arc current concentrates toward the center. The current value is high between electrodes slots under the actual magnetic field, which significantly affects the arc characteristics. At the same time, higher anode temperatures will produce more neutral atom vapor area (NAVA). Current is concentrated outside NAVA due to the low conductivity of NAVA. As NAVA expands, the constriction of current on the outside is more severe. The simulation results in this paper are consistent with the experimental results. [ABSTRACT FROM AUTHOR]

This work investigates the transient anode temperature and plasma parameters considering the electrode movement and the arc expansion. A transient self-consistent model is established using the dynamic mesh approach. Two cases with different maximum arc currents, representing various anode activity, have been studied. The simulations predict significant changes in spatial distribution of species densities, electron temperature and anode surface temperature in case with the anode spot formation. Furthermore, the influence of opening velocity on the plasma parameters has been studied numerically. The model was validated by comparison with experimental data for anode surface temperature as well as spectrally filtered arc images. Results of this comparison are presented and discussed. [ABSTRACT FROM AUTHOR]

This paper aims to investigate the anode modes of vacuum arc at different opening speeds, especially at a high opening speed that exceeds 3 m/s. The butt contacts made of CuCr30 and CuCr50 with a diameter of 15 mm are used. Experiments are conducted at the current of 3.3, 4.4, 5.5, and 6.3 kA with a frequency of 50 Hz. An electromagnetic repulsion actuator provides the average opening speed from 1.7 to 3 m/s. The experimental results show that the number of droplets splashing into electrodes increases as the arc current increases, while a higher opening speed decreases the droplets. A higher opening speed will reduce the transferred charge before the anode spot type 2, and a higher Cr content increases the transferred charge before the anode spot type 2. Increasing opening speed will decrease the starting time of anode spot type 2, but it increases the gap distance when anode spot type 2 appears. Meanwhile, the increase in Cr content delays the formation of anode spot type 2. [ABSTRACT FROM AUTHOR]

A three-dimensional (3-D) model for multispecies vacuum arc considering ionization and recombination process has been built in this article. With the model, the arc behaviors and species characteristics subjected to actual spatial magnetic fields of cup-shaped axial magnetic field (AMF) contact and transverse magnetic field-axial magnetic field (TMF-AMF) contact are investigated and compared. Furthermore, the validity of the model is verified by comparing with the experiments. Simulation results show that contact structures affect the species distributions of the arc by changing magnetic field and current density distributions. More triple charged ions are generated through ionization under higher electron temperature so that the triple charged ions gather where current constricts. The heat flux density is large in the current contraction region, where the contribution from triple charged ions is large as well. Spatial magnetic field distribution affects the Lorentz force acting on ion components. The force distribution is relatively uniform and the species are subject to inward force on the arc edge under cup-shaped AMF contact. For TMF-AMF contact, the double charged ions are subject to the force pointing to the TMF contact arms, whereas the triple charged ions are subject to the force pointing to the arc center. In addition, the consideration of arc species can improve the accuracy of the simulation results of the heat flux distribution, leading to a good agreement of the erosion condition between experiments and simulation. [ABSTRACT FROM AUTHOR]

As a special phenomenon under transverse magnetic field (TMF) contacts, vacuum arc rotation deserves more attention. In this article, rotation characteristics of three typical TMF contacts, i.e., swastika-type, cup-shaped, and double-TMF contacts, are systematically studied. According to arc images, recorded by a high-speed camera, physical terms related to arc rotation such as rotation duration and rotation speed are clearly defined. The magnetic field and Lorentz force are calculated and the force balance of the moving arc is analyzed. On this basis, the effects of arc ignition mode, peak current, and contact type on arc rotation are investigated. Arc voltage noise as well as arc splashing outside caused by rotation is also discussed. The results show that the duration from ignition to rotation in two-point arc ignition (TPAI) mode is usually the shortest because of the rapidest constructed column formation. As the peak current increases, arc rotation becomes easier. Due to stronger TMF, the arc under double-TMF contacts has the longest rotation duration and the highest rotation speed. [ABSTRACT FROM AUTHOR]