Search

In this article, an optimized design for a dual-coupled inductor–capacitor–capacitor-series (LCC-S)-compensated wireless power transfer (WPT) system with zero-phase angle (ZPA) input condition and load-independent constant current (CC) output is presented. To this end, based on the misalignment characteristics of the reversed-series compensation coil structure, a novel design method for determination of the compensation parameters is proposed. By introducing a stability factor, any restriction on the variation correlation of the mutual inductances between the transmitter and receiver coils, and between the compensation and receiver coils within the range of misalignment tolerant design, is eliminated, thereby increasing the degree of freedom in the coil structure. According to a predetermined misalignment tolerant range, the proposed method can limit the fluctuation of the output current within a certain range and maintain the ZPA input condition. A 200-W/85.3-kHz prototype based on the proposed method is implemented and its performance is experimentally validated. The system can operate in ZPA input and load-independent CC output with a misalignment tolerance factor of 4, as the load varies from 5 to 20 $\Omega$. [ABSTRACT FROM AUTHOR]

Medium-voltage dc (MVdc) grids are attractive for electric aircraft and ship power systems, battery energy storage system (BESS), fast charging electric vehicle (EV), etc. Such EV or BESS applications need isolated bidirectional MVdc to low-voltage dc (LVdc) or LVac converters. However, the existing Si-based solutions cannot fulfill the requirements of a high-efficiency and robust converter for MVdc grids. This article presents a 5-kV SiC-based universal modular solid-state transformer (SST). This universal current-source SST can interface either an LVac or LVdc grid with an MVdc grid in single-stage power conversion, while the conventional dual-active bridge (DAB) converter needs an additional inverter. The proposed SST module using 3.3-kV SiC MOSFETs and diodes is bidirectional and can serve as a building block in series or parallel for higher voltage higher power systems. The topology of each module is based on the soft-switching solid-state transformer (S4T) with reduced conduction loss, which features reduced electromagnetic interference electromagnetic interference (EMI) through controlled dv/dt, and high efficiency with full-range zero-voltage switching for main devices and zero-current switching for auxiliary devices. Operation principle of the modular S4T (M-S4T), capacitor voltage balancing control between the cascaded modules, design of components including a medium-voltage (MV) medium-frequency transformer (MFT) to realize a 50-kVA, 5-kV dc to 600 V dc or 480 V ac M-S4T are presented. Importantly, the MV MFT prototype achieves very low leakage inductance (0.13%) and 15-kV insulation with coaxial cables and nanocrystalline cores. The proposed universal modular SST is compared against the DAB solution and verified with dc–dc and dc–ac simulation and 4-kV experimental results. Significantly, the MV experimental results of a modular dc transformer with each module at MVdc are rarely covered in the literature and reported for the first time. [ABSTRACT FROM AUTHOR]