Search

Metal-organic framework (MOF) glasses are a fascinating new class of materials, yet their prosperity has been impeded by the scarcity of known examples and limited vitrification methods. In the work described in this report, we applied synergistic stimuli of vapor hydration and thermal dehydration to introduce structural disorders in interpenetrated

Copper-catalyzed selective alkynylation with N-propargyl carboxamides as nucleophiles has been successfully developed for the synthesis of C2-functionalized chromanones. Under optimized reaction conditions, 21 examples were obtained in one-pot procedure through 1,4-conjugate addition. This protocol features readily available feedstocks, easy operations and moderate to good yields, which provides viable access to pharmacologically active C2-functionalized chromanones.

Efficient and direct conversion of methane to value-added products has been a long-term challenge in shale gas applications. Here, we show that atomically thin nanolayers of Pt with a single or double atomic layer thickness, supported on a two-dimensional molybdenum titanium carbide (MXene), catalyse non-oxidative coupling of methane to ethane/ethylene (C2). Kinetic and theoretical studies, combined with in-situ spectroscopic and microscopic characterizations, demonstrate that Pt nanolayers anchored at the hexagonal close-packed sites of the MXene support can activate the first C–H bond of methane to form methyl radicals that favour desorption over further dehydrogenation and thus suppress coke deposition. At 750 °C and 7% methane conversion, the catalyst runs for 72 hours of continuous operation without deactivation and exhibits >98% selectivity towards C2 products, with a turnover frequency of 0.2–0.6 s−1. Our findings provide insights into the design of highly active and stable catalysts for methane activation and create a platform for developing atomically thin supported metal catalysts. The challenge in non-oxidative coupling of methane lies in the activation of the first C–H bond while avoiding further dehydrogenations, which lead to the formation of coke. Here, atomically thin platinum nanolayers on two-dimensional molybdenum titanium carbides are reported as a superior catalyst for this reaction owing to reduced coke formation.

Synthesis and implementation of highly active, stable, and affordable electrocatalysts for the oxygen evolution reaction (OER) is a major challenge in developing energy efficient and economically viable energy conversion devices such as electrolyzers, rechargeable metal-air batteries, and regenerative fuel cells. The current benchmark electrocatalyst for OER is based on iridium oxide (IrOx) due to its superior performance and excellent stability. However, large scale applications using IrOx are impractical due to its low abundance and high cost. Herein, we report a highly active hafnium-modified iridium oxide (IrHfxOy) electrocatalyst for OER. The IrHfxOy electrocatalyst demonstrated ten times higher activity in alkaline conditions (pH = 11) and four times higher activity in acid conditions (pH = 1) than a IrOx electrocatalyst. The highest intrinsic mass activity of the IrHfxOy catalyst in acid conditions was calculated as 6950 A gIrOx-1 at an overpotential (η) of 0.3 V. Combined studies utilizing operando surface enhanced Raman spectroscopy (SERS) and DFT calculations revealed that the active sites for OER are the Ir-O species for both IrOx and IrHfxOy catalysts. The presence of Hf sites leads to more negative charge states on nearby O sites, shortening of the bond lengths of Ir-O, and lowers free energies for OER intermediates that accelerate the OER process.

Upon reduction at 975 °C, a strong metal-support interaction (SMSI) of CeO2 on Pt NPs leads to low rates for ethylene hydrogenation and propane dehydrogenation, but high olefin selectivity for the latter reaction. By contrast, reduction at 550 °C of Pt/CeO2, leads to 5 nm Pt NP’s with ethylene hydrogenation and propane dehydrogenation TORs and low olefin selectivity similar to Pt/SiO2. X-ray absorption fine structure (EXAFS) and scanning transmission electron microscopy (STEM) shows formation of ∼15 nm monometallic Pt nanoparticles partially covered by SMSI CeO2. The propylene selectivity of Pt NP’s covered by SMSI CeO2 was ∼95 % suggesting there were few Pt ensembles capable of catalysing propane hydrogenolysis; while the remaining exposed Pt remain active for dehydrogenation reactions.

Electrochemical CO

In this work, functionalized alkyl imidazolium hexafluorophosphate ILs were synthesized and characterized; then, they were applied in the conversion of xylose to furfural under the microwave method. The results showed that when CnMF was used as a catalyst, an acidic environment was provided to promote the formation of furfural. In addition, the heating method, the solvent, and the different structures of cations in the ionic liquid influenced their catalytic activity. In an aqueous solution, the yield of furfural obtained using the microwave method was better than that of the conventional heating method, and the catalytic activity of diimidazole hexafluorophosphate was better than that of monoimidazole. Meanwhile, for the diimidazole hexafluorophosphate, the change of the carbon chain length between the imidazole rings also slightly influenced the yield. Finally, the optimal yield of 49.76% was obtained at 205°C for 8 min using 3,3′-methylenebis(1-methyl-1H-imidazol-3-ium), C1MF, as a catalyst. Mechanistic studies suggested that the catalytic activity of C1MF was mainly due to the combined effect of POFn (OH)3-n and imidazole ring. Without a doubt, the catalytic activity of C1MF was still available after five cycles, which not only showed its excellent catalytic activity in catalyzing the xylose to prepare the biomass platform compound furfural but also could promote the application of functionalized ionic liquids.

In this study, the vanadium pentoxide (V2O5), functionalized carbon nanotubes (f-CNT), and polypyrrole (PPy) based composites films have been prepared through a facile synthesis method and their electrochemical performance were evaluated as freestanding negative electrodes of supercapacitor. A hydrous V2O5 gel prepared by treating V2O5 powder with H2O2 was mixed with f-CNT to obtain V2O5/f-CNT composite film. V2O5/f-CNT composite was then coated with PPy through vapor phase polymerization method. The PPy deposited on the V2O5/f-CNT prevented the dissolution of V2O5 and thus resulted in an improved the capacitance and cycle life stability for V2O5/f-CNT/PPy composite electrode. V2O5/f-CNT/PPy freestanding negative electrode exhibited a high areal capacitance value (1266 mF cm−2 at a current density of 1 mA cm−2) and good cycling stability (83.0% capacitance retention after 10,000 charge-discharge cycles). The superior performance of the V2O5/f-CNT/PPy composite electrode can be attributed to the synergy between f-CNT with high conductivity and V2O5 and PPy with high-energy densities. Thus, V2O5/f-CNT/PPy composite based electrode can effectively mitigate the drawbacks of the low specific capacitance of CNTs and the poor cycling life of V2O5.

The genotype and phenotype of acral melanoma are obviously different from UV-radiation-induced melanoma. Based on the clinical data, mechanical stimulation is believed to be a potential cause of acral melanoma. In this case, it is desirable to clarify the role of mechanical stimulation in the progression of acral melanoma. However, the pathological process of cyclic straining that stimulates acral melanoma is still unclear. In this study, the influence of cyclic straining on melanoma cell proliferation was analyzed by using a specifically designed cell culture system. In the results, cyclic straining could promote melanoma cell proliferation but was inefficient after the disruption of cytoskeleton organization. Therefore, the mechanotransduction mechanism of promoted proliferation was explored. Both myosin and actin polymerization were demonstrated to be related to cyclic straining and further influenced the morphogenesis of melanoma cells. Additionally, the activation of mechanosensing transcription factor YAP was related to regulatory morphogenesis. Furthermore, expression levels of melanoma-involved genes were regulated by cyclic straining and, finally, accelerated DNA synthesis. The results of this study will provide supplementary information for the understanding of acral melanoma.

Tailoring the structure of metal components and interaction with their anchored substrates is essential for improving the catalytic performance of supported metal catalysts; the ideal catalytic configuration, especially down to the range of atomic layers, clusters, and even single atoms, remains a subject under intensive study. Here, an Ir-on-MXene (Mo