Search

Chlorine species, widely presented in industrial flue gas such as the waste incineration plants, can poison the catalysts and affect the selective catalytic reduction (SCR) performance. In this work, effects of Cl on the SCR performance of V2O5–WO3/TiO2 (VW/Ti) catalysts were investigated by NH4Cl deposition. The results showed that the NOx conversion efficiency at low reaction temperature (< 300 °C) decreased with the loading of NH4Cl after calcination. It was found that instead of causing the chlorination of VW/Ti catalyst the NH4Cl decomposed into volatile Cl species due to the weak V–Cl bonding. Such decomposition reduced significantly the surface non-lattice oxygen species to inhibit NO adsorption and activation, but hardly affected the redox ability and acidity of VW/Ti catalyst. Time–resolved in situ DRIFTs results indicated that NH3 activation and the SCR process predominated by Eley–Rideal mechanism were not influenced with NH4Cl impregnation, while the SCR at low temperature following a Langmuir–Hinshelwood path was limited by the decreased and weaker binding sites for NO activation. [ABSTRACT FROM AUTHOR]

Selective catalytic reduction of NOx by ammonia (NH3‐SCR) was affected by HCl, which was widely present in industrial flue gas. In this study, the SCR performances over MOx‐WO3/TiO2 (MW/Ti, M=Mn, Ce and V) catalysts after HCl treatment were investigated. It was found that HCl poisoning showed inhibition and promotion in NOx conversion over MnW/Ti and CeW/Ti catalysts, respectively. While the SCR activity over VW/Ti catalyst was hardly affected by HCl. Over MnW/Ti catalyst, the rupture of the Mn−O bond by the strong Mn−Cl binding induced the formation of amorphous MnCl2 species. This Cl‐containing species with Mn in a low oxidation state exhibited poorer redox ability and NO activation, resulting in a decrease in low‐temperature SCR activity. However, instead of directly affecting the CeOx and VOx sites, gaseous HCl reacted with NH3 to form NH4Cl species on the surface of CeW/Ti and VW/Ti catalysts. As a result, the SCR activity of VW/Ti catalyst was scarcely influenced by HCl, taking the unchanged redox ability and NH3 adsorption. With a further accumulation of NH4Cl on CeW/Ti catalyst, the NOx conversion at low temperature was evidently enhanced due to the promotion in NO‐to‐NO2 conversion (Fast‐SCR). [ABSTRACT FROM AUTHOR]

Selective catalytic reduction of NOx by ammonia (NH3‐SCR) was affected by HCl, which was widely present in industrial flue gas. In this study, the SCR performances over MOx‐WO3/TiO2 (MW/Ti, M=Mn, Ce and V) catalysts after HCl treatment were investigated. It was found that HCl poisoning showed inhibition and promotion in NOx conversion over MnW/Ti and CeW/Ti catalysts, respectively. While the SCR activity over VW/Ti catalyst was hardly affected by HCl. Over MnW/Ti catalyst, the rupture of the Mn−O bond by the strong Mn−Cl binding induced the formation of amorphous MnCl2 species. This Cl‐containing species with Mn in a low oxidation state exhibited poorer redox ability and NO activation, resulting in a decrease in low‐temperature SCR activity. However, instead of directly affecting the CeOx and VOx sites, gaseous HCl reacted with NH3 to form NH4Cl species on the surface of CeW/Ti and VW/Ti catalysts. As a result, the SCR activity of VW/Ti catalyst was scarcely influenced by HCl, taking the unchanged redox ability and NH3 adsorption. With a further accumulation of NH4Cl on CeW/Ti catalyst, the NOx conversion at low temperature was evidently enhanced due to the promotion in NO‐to‐NO2 conversion (Fast‐SCR). [ABSTRACT FROM AUTHOR]

Chlorine species, widely presented in industrial flue gas such as the waste incineration plants, can poison the catalysts and affect the selective catalytic reduction (SCR) performance. In this work, effects of Cl on the SCR performance of V2O5–WO3/TiO2 (VW/Ti) catalysts were investigated by NH4Cl deposition. The results showed that the NOx conversion efficiency at low reaction temperature (< 300 °C) decreased with the loading of NH4Cl after calcination. It was found that instead of causing the chlorination of VW/Ti catalyst the NH4Cl decomposed into volatile Cl species due to the weak V–Cl bonding. Such decomposition reduced significantly the surface non-lattice oxygen species to inhibit NO adsorption and activation, but hardly affected the redox ability and acidity of VW/Ti catalyst. Time–resolved in situ DRIFTs results indicated that NH3 activation and the SCR process predominated by Eley–Rideal mechanism were not influenced with NH4Cl impregnation, while the SCR at low temperature following a Langmuir–Hinshelwood path was limited by the decreased and weaker binding sites for NO activation. [ABSTRACT FROM AUTHOR]