Search

The thermal analysis kinetic method was employed to solve the activation energies of the thermal decomposition reactions of urea and cyanuric acid, with the purpose of understanding the formation of deposits in the diesel engine SCR system. The deposit reaction kinetic model was established by optimizing the reaction paths and reaction kinetic parameters based on the thermal analysis test data of the key components in the deposit. The result shows that the established deposit reaction kinetic model can accurately describe the decomposition process of the key components in the deposit. Compared to the Ebrahimian model, the simulation precision of the established deposit reaction kinetic model is significantly improved above 600 K. The activation energies of the urea and cyanuric acid decomposition reactions are 84 kJ/mol and 152 kJ/mol, respectively, after model parameters identification. The identified activation energies were closest to those of the Friedman one-interval method indicating that the Friedman one-interval method is reasonable to solve the activation energies of deposit reactions. [ABSTRACT FROM AUTHOR]

There are still many unsolved mysteries in the thermal decomposition process of urea. This paper studied the thermal decomposition process of urea at constant temperatures by the thermal gravimetric–mass spectrometry analysis method. The results show that there are three obvious stages of mass loss during the thermal decomposition process of urea, which is closely related to the temperature. When the temperature was below 160 °C, urea decomposition almost did not occur, and molten urea evaporated slowly. When the temperature was between 180 and 200 °C, the content of biuret, one of the by-products in the thermal decomposition of urea, reached a maximum. When the temperature was higher than 200 °C, the first stage of mass loss was completed quickly, and urea and biuret rapidly broke down. When the temperature was about 240 °C, there were rarely urea and biuret in residual substance; however, the content of cyanuric acid was still rising. When the temperature was higher than 280°C, there was a second stage of mass loss. In the second stage of mass loss, when the temperature was higher than 330 °C, mass decreased rapidly, which was mainly due to the decomposition of cyanuric acid. When the temperature was higher than 380 °C, the third stage of mass loss occurred. However, when the temperature was higher than 400 °C, and after continuous heating was applied for a sufficiently long time, the residual mass was reduced to almost zero eventually. [ABSTRACT FROM AUTHOR]