Search

The metallurgical sector is one of the most emission- and energy-intensive industries. The possibility of using fossil carbon substitutes has been investigated to reduce the environmental impact of the steelmaking sector. Among others, biochar emerged as a promising fossil coal/coke substitute. We conducted a literature review on biochar use in the metallurgical sector and its potential environmental benefits. The possibility for biochar as a coal/coke substitute is influenced by the source of biochar production and the process within which it can be used. In general, it has been observed that substitution of biochar ranging from a minimum of 5% to a maximum of 50% (mostly around 20–25%) is possible without affecting, or in some cases improving, the process, in coke making, iron sintering, blast furnaces and electric furnaces application. In some studies, the potential CO2 reduction due to biochar use was estimated, ranging from 5% to about 50%. Despite there still being an area of further investigation, biochar appeared as a promising resource with a variety of uses in the metallurgical sector, contributing to the lowering of the environmental impact of the sector. [ABSTRACT FROM AUTHOR]

Featured Application: Sewage Sludge management plan. From the perspective of a circular economy that prioritizes resource reuse and recovery, sewage sludge could be a source of nutrients for agricultural soils or a source of energy, depending on its characteristics. Lombardy is the region with the highest quantity of sludge production and management in Italy. A methodology was developed to: extract and analyze quantitative data on sewage sludge (EWC 190805) production and management (2017–2018); collect and analyze qualitative data from publicly available documents in tender processes for sewage sludge management (2014–2020). Sludge from Lombardy's wastewater treatment facilities displayed average qualities that were useful for recovery in agriculture after additional stabilization treatments. Sludge showed generally low heating values and elevated water content and should require additional treatments to be used in mono-combustion. The study discovered that there is still work to be done in sludge recovery in agriculture in Lombardy, taking biosolid quality into account. Sludge, on the other hand, can be converted into energy. The methodology for collecting and analyzing site-specific data presented here can be applied to other areas. The findings can assist and guide decision-makers in developing future regional sewage sludge management strategies. [ABSTRACT FROM AUTHOR]

Although significant achievements have already been made in waste recycling, the quantity of material residues that annually end up in landfills is still regarded as an important environmental pressure at the global level. This paper presents the development of a methodology for studying the potentials of resource recovery for regions and provinces with a case study in the Province of Brescia. The provincial waste management database was used for mapping the wastes' origins and destinations. A Big Data Analysis approach was followed by developing two software packages. The first package is designed in the Powerbi environment to analyse waste management in each waste category, sector, and zone. The second tool was developed using R statistical software for preparing the mass-balance models in combination with spatial analysis. The two packages provide the possibility for planning interventive actions such as the circular economy and industrial symbiosis by identifying the most problematic points and targeting the improvement measures to minimize waste disposal. [ABSTRACT FROM AUTHOR]

Minimizing the biological sewage sludge (BSS) produced by wastewater treatment plants (WWTPs) represents an increasingly difficult challenge. With this goal, tests on a semi-full scale Thermophilic Alternate Membrane Biological Reactor (ThAlMBR) were carried out for 12 months. ThAlMBR was applied both on thickened (TBSS) and digested biological sewage sludge (DBSS) with alternating aeration conditions, and emerged: (i) high COD removal yields (up to 90%), (ii) a low specific sludge production (0.02–0.05 kgVS produced/kgCODremoved), (iii) the possibility of recovery the aqueous carbon residue (permeate) in denitrification processes, replacing purchased external carbon sources. Based on the respirometric tests, an excellent biological treatability of the permeate by the mesophilic biomass was observed and the denitrification kinetics reached with the diluted permeate ((4.0 mgN-NO3−/(gVSS h)) were found comparable to those of methanol (4.4 mgN-NO3−/(gVSS h)). Moreover, thanks to the similar results obtained on TBSS and DBSS, ThAlMBR proved to be compatible with diverse sludge line points, ensuring in both cases an important sludge minimization. [ABSTRACT FROM AUTHOR]

[Display omitted] Identify sustainable biological sewage sludge (BSS) management represents a current challenge. In this work, pre-thickened BSS taken from a large-scale urban wastewater treatment plant (WWTP) was fed continuously for about 9 months to a semi-industrial scale thermophilic biological fluidized bed reactor (TBFBR) operating in alternate conditions. The BSS treated in TBFBR was strongly reduced (89–92%) and the production was evaluated in 0.0007–0.0023 kg kg CODremoved −1 d−1 and 0.0004–0.0014 kg kg CODremoved −1 d−1 of TS and VS, respectively. The 92% of the P-PO 4 3- and P-org precipitated in inorganic form and accumulated in thermophilic biological sludge (TBS). In basic soils with chelating activity, phosphorus contained in TBS presented a higher bioavailability (84.0 ± 25.3%) with respect to untreated sludge. The analysis of four diverse scenarios highlighted that TBFBR located after pre-thickening could save 73–96% of operating costs with respect to current situation. [ABSTRACT FROM AUTHOR]